I know it is a newbie question but the documentation is really not clear about that.
I have successfully launched a Cluster Instances Amazon Linux AMI 2011.02.1 cc1.4xlarge instance. I need to upload and process a 15 GB text file and I don't know how to activate the "additional" storage.
By default, I have just 8 GB of storage. Can someone help me writing simple and clear instruction on how to activate all the storage (1690 GB) I should have?
Thanks a lot in advance.
Regards,
Eugenio
You should be able to mount your ephemeral drives by following this guide.
Cheers.
It's a very common question and there's a large confusion that everyone has around this when starting to work with AWS EC2.
There are 2 things to have in mind here :
Instance Type
AMI (Amazon Machine Image, basically a disk snapshot with some operating system)
Each AMI has some requirements that will dictate parts of the configuration of your created instance.
Here we're concerned with the Root Device type of an AMI :
EBS-backed AMI
These AMI's only work on instances that have an EBS volume attached. And therefore if you choose an EBS-backed AMI, the wizard will by default add an EBS volume (usually of size 8 GiB) without you noticing, and you'll be charged for this EBS separately in addition to the EC2 hourly charge. In this case when you ssh to your instance you will only find 8 GiBs of storage and not the large storage you're promised when you view the EC2 Pricing table at https://aws.amazon.com/ec2/pricing/ . And that is confusing.
If you also want to use your -usually large- instance store with these AMIs, then when you create that instance you have to explicitly add a volume and select Instance Store 0 from Volume Type (in Step 4 - Add Storage). You may have more than 1 drives assigned to your instance type, you need to add all of them in this case (Instance Store 0,1,..etc). These volumes can only be added at creation time. If the volumes were automatically mounted then you'll find them at /media/ephemral*, if not, you'll have to mount them manually.
Instance-Store-backed AMI
Those images use the Instance Storage as their root device (the OS will be installed on the instance store at / ). I think the confusion comes from the fact that these AMI's are not instantly viewable in the Quick Start tab of Step 1 at which you choose the AMI. All AMIs in the Quick Start tab are EBS-backed, and Instance Store AMIs are very uncommon these days, everyone uses EBS-backed AMIs because of their various speed and persistence benefits, and that's recommended by Amazon as well.
If you want an instance-store-backed AMI to avoid dealing with any EBS whatsoever, then in Step 1, choose the tab Community AMIs, and filter them by Root Device Type = Instance Store, then choose your AMI. Whether or not you add Instance Store 0 in Step 4 - Add Storage, the instance store will be available.
Check what Amazon Linux AMI type you're launching the image as. In my experience, if you launch with the "EBS-backed" AMI type, it won't mount the ephemeral storage. If you switch to the "Instance Store" type, it will mount it for you at /media/ephemeral0
http://aws.amazon.com/amazon-linux-ami/
Related
When I launch the instance, it automatically comes with a 30GB "C: Drive" and some "Ephemeral" drives.
My question is
"...where is the expected 410GB hard drive?"
I noticed you can change the default 30GB to be some other size.
Is this where one can increase to up to 410GB?
Instance storage is not enabled by default:
Instances that use Amazon EBS for the root device do not, by default,
have instance store available at boot time. Also, you can't attach
instance store volumes after you've launched an instance. Therefore,
if you want your Amazon EBS-backed instance to use instance store
volumes, you must specify them using a block device mapping when you
create your AMI or launch your instance.
You will find this quote and more info about how to enable it in the AWS-EC2 User Guide. See the section "Making Instance Stores Available on Your Instances".
I have a Windows 2008 EC2 instance to which I have done some customizing on the EBS boot drive.
I started the instance as m1.small (or m1.large) and the instance storage does not appear as an additional drive.
I've read that the -b switch in the ec2-run-instances command allows you to create mappings for the ephymeral instance storage. The ec2-run-instances command creates a new instance, however, in my case, the instance already exists and therefore I start it as ec2-start-instances, which does not have a -b switch for ephymeral instance storage.
Is there any way I can get to the ephymeral instance storage that comes with an m1.small instance for my existing EBS-booted instance?
UPDATE: It seems that nowadays (Feb 2015) Windows machines mount ephymeral instance storage in the Z: drive.
I'm afraid this functionality isn't available (yet) for Amazon EC2, but it's a very good question in fact - the common answer used to refer to the explicated launch time requirement, see e.g. ec2-modify-instance-attribute:
Note
If you want to add ephemeral storage to an Amazon EBS-backed instance,
you must add the ephemeral storage at the time you launch the
instance. For more information, go to Overriding the AMI's Block
Device Mapping in the Amazon Elastic Compute Cloud User Guide, or to
Adding A Default Instance Store in the Amazon Elastic Compute Cloud
User Guide. [emphasis mine]
That hasn't been that much of an issue in the past, but given the recent introduction of 64-bit ubiquity implies a significant improvement of vertical scaling versatility (see EC2 Updates: New Medium Instance, 64-bit Ubiquity, SSH Client), this is suddenly a topic indeed - your question yields even more questions in turn:
What happens for the converse case, i.e. when I start a sufficiently large instance with lots of ephemeral storage and scale it down (and possibly up again) thereafter?
In case the initial block device mapping is retained somehow, should we always start with a large instance therefore? (I actually doubt that this is the case though.)
This question can only be addressed by the AWS team I guess, so you may want to file a support request or relay the question to the Amazon Elastic Compute Cloud forum at least.
I think what you're asking (but correct me if I'm wrong) is "how do I add additional storage to an EC2 instance?".
In which case, the answer is:
Select the Volumes panel in the AWS console and create a new volume of the size you want, making sure it's in the same Availability Zone as the instance you want to attach it to. Then select that new Volume, and click 'Attach' - select the instance you want to attach it to, and click OK.
Now log-on to the instance, and in Computer Management select the Disk Management plugin, format the new unassigned partition, and give it whatever drive letter you wish. It will then show up in Explorer as a standard Windows drive.
I understand that when I launch an instance on ec2, that the instance has to be located on a particular data center, and that after launching you can't change that. I also understand that an AMI is created from an instance.
But what I dont understand, is when I launch an instance from an AMI, why can't I specify what region I want it to run on? Seems like it shouldnt matter, once the AMI is created you should be able to launch it in any region. What does the AMI contain that ties it to a region and why?
Kernels. The kernel IDs change across regions (don't ask me why).
Meaning an AMI which specifies a kernel ID to be booted with can only be booted in the region this kernel ID exists.
AMI is region specific because AMI basically contains a software configuration (for example, an operating system, an application server, and applications). From an AMI, you launch an instance, which is a copy of the AMI running as a virtual server in the cloud. And if we consider AMI a global service, it means all AMIs are stored in one place and have access to all regions. For this, it will take more time to pull and then create instances. So if it is available in a region(region-specific), then we can quickly launch instances fast without time delay.
Or is it absolutely necessary to have an EBS backed storage? Does anyone have manuals/Howtos?
I am following the manual given on this site.
You can create an AMI from either an EBS or S3-backed running instance. The simplest way is to use the AWS Management Console to select the instance and click 'Create Image' from the Instance Actions menu.
This will create either an EBS or S3-backed AMI, depending on the type of instance.
Be aware that creating an AMI from a Running instance is inherently potentially unsafe - the storage is not imaged as a hard 'point-in-time' snapshot, so changes to the filesystem whilst the image is being created may not be recorded, and may even result in a compromised image. You should quiesce the OS as far as possible before starting.
Note also that your instance will reboot during the image-creation process, so make sure you're prepared for any temporary loss of service from the VM.
If you bundle a Windows EBS instance while it is running, its Administrator password will be reset by Amazon's rebundling tools - so you'll have to use the EC2 "get Admin password" function with instances launched from the new AMI.
If you stop your Windows instance before rebundling, its Administrator password will remain intact through the rebundling process.
I don't know if this is documented anywhere, but it's certainly been my experience with Windows 2003 instances.
you will to refer the manual for the three commands:
ec2-bundle-vol, ec2-upload-bundle, ec2-register.
Keep at hand your private and certificate key (eg. pk.pem, cert.pem files) and your access and shared key. Download the ec2 ami tools and setup the environment variables for the ec2 ami tools. This site might give you the details on how to bundle the volume, create the images, upload them to S3 and finally register it as your own ami.
http://alestic.com/2009/06/ec2-ami-bundle
It is possible to create an AMI from an EBS running instance using the AWS management console. as mentioned by Eight-Bit Guru by clicking 'Create Image' from the Instance Actions menu.
For the S3 backed instance it is currently not possible without bundling the instance.
If you are using a linux ami then you have two ways as explained in this guide:
Creating an AMI from S3 backed instance - For Linux
For windows based S3 backed instance you can follow other guide
Creating an AMI from S3 backed instance - For Windows
Hope this will help for creating an AMI for S3 backed intances.
I am new to Amazon web services. I need to create a server image with a few software packages pre installed on the EC2 instances.
One option I am considering is to create an EBS volume with these packages and then use them to launch EC2 instances.
The other option I am thinking of is to create a private AMI and then use them to launch the EC2 instances.
I am not sure which option is better.
One other slightly related question I have is can I create a private EBS volume and share it with some other account.
You should create your own AMI, as it's probably more efficient. In order to create an instance, you must specify an AMI. Specifying an EBS snapshot as the root device in addition to specifying the AMI (if this even works, I haven't tested it) would just result in the EC2 cloud launching your instance with the AMI, followed by overwriting it with the EBS snapshot for the root volume.
It's easy enough to keep the AMIs laying around as prototypes.