I upgraded my Xcode SDK to version 10 last night and then find I cannot build.
I'm getting this error:
Build input file cannot be found:
'/Users/call01/Library/Developer/Xcode/DerivedData/Comp-Lite-Apps-gytvmossqptokeafrddvvmnlzadk/Build/Products/Debug-iphoneos/SG11.app/SG11
which did not exist before my upgrade and I'm tempted to revert back but would like to stick with version 10 if I can resolve this issue.
Try to switch back to the Legacy Build System (File > Project Settings > Workspace Settings > Legacy Build System)
For Swift files or files that belong to the project such as:
Build input file cannot be found: PATH/TO/FILE/FILE.swift
This issue can happen when files or folders have been removed or moved in the project.
To fix it:
Go in the project-navigator, select your project
Select Build Phasestab
In Compile Sources section, check for the file(s) that Xcode is complaining of
Notice that the file(s) have the wrong path, and delete them by clicking on the minus icon
Re-add the file(s) by clicking the plus icon and search in the project.
Product > Clean Build Folder
Build
You generally find these missing files in the Recovered References folder of Xcode in the project tree (look for the search bar at the bottom-left of Xcode and search for your complaining file):
Deleting them from this folder can also solve the error.
For me In Xcode 10, this solution worked like a charm. Just go to the Recovered References folder and remove all files in red color and add it again with proper reference.
If Recovered References folder was not found: Check for all missing files in the project (files in red colour) and try to add files references again.
Just check the path to .plist file in Build Settings of your target
Funnily, closing Xcode and reopening it might also be enough.
This worked for me in Xcode 10:
Click Project icon/name in your Xcode project
Go to General tab
Click [Choose info.plist File] under Identity section
Select the info.Plist file
Check Info tab to see if info.plist was loaded successfully
Build and run
This is an architecture problem. Do not change to legacy build system!
I got the same error, but what solved it for me was this:
The top says architectures in VALID_ARCHS are also excluded in EXCLUDED ARCHS. I was messing around with them to get a Swift Package to compile in Xcode 12, and have spent hours on this.
It would compile on the simulator and not on a device.
The Solution:
Go to Build Settings
Ensure "Architectures" contains 1 entry : $(ARCHS_STANDARD)
Ensure there is nothing in "Excluded Architectures"
Now scroll right to the bottom of Build Settings.
Make sure the VALID_ARCHS is exactly the same as this screenshot.
The arm stuff is $(ARCHS_STANDARD) again.
If VALID_ARCHS doesn't exist, add it with the + button.
Clean (cmd-shift-K)
Your project should now build perfect on both the simulator and device!
If it doesn't work, you need to make sure all these settings are the same both in your target build settings and the project build settings.
Note, if you have a Mac with Apple silicon, you may not need to do any of this.
The above solution eventually works for me; however, I need to do some more extra steps to finally make it to compile successfully. (These extra steps were required even on Xcode 9.)
Xcode: File -> Workspace Settings -> Build System: Legacy Build System
Xcode: Product -> Clean
Rotate to compile thru different emulator types, such as "iPhone 8", "iPhone 8 Plus", etc. (They might fail or might not.)
Eventually compile on "Generic iOS Device"
I fixed this issue this way: go to your project's Build Phases (click on project icon at the top, and then click on Build Phases). Search for your file there. If it's there (it'll be grayed out), delete it. Then clean (shift + alt + command + k), and run! Hope it helps.
If the error says it can't find Info.plist and it's looking in the wrong path, do the following:
Select your project from the navigator, then select your target
Select "Build Settings" and search "plist"
There should be an option called Info.plist File. Change the location to the correct one.
None of the above worked for me, but this did:
Open project in Finder, right click on your .xcodeproj file and show package contents
Open project.pbxproj in a text editor
Find the reference to your missing file
Edit path = "path/to/file.swift" to the actual location on disk and save the file.
Rebuild the project
In my case I had a build script that generated the .app binary (Buck).
The Buck build script ran in parallel with Swift Embed build step. Because the .app binary was not generated yet the Swift step would fail.
In my build script I added "$BUILD_PRODUCTS_DIR/$EXECUTABLE_PATH" under "Output Files".
This tells Xcode's New Build System that this script will output the app Binary and in turn Xcode will make sure to synchronize any build steps that depend on this artifact.
I ran into this error after renaming a file. Somehow Xcode didn't correctly rename the actual file on disk.
So it wasn't able to find the file. Sometimes the files gets highlights with a red text color. At other times the Swift icon in front of the file was getting a gray overlay.
The fix was simple.
Look into the error and see exactly which file it's unable to find.
Select the file that can't be found.
Go to the 'File Inspector'. It's on Xcode's right navigation pane.
Click on the folder icon.
Select the correct file.
Clean build and run it again.
Open the right navigation pane where your project files exist
OR JUST click on cmd + 1. Then search for "Recovered References" folder. Open it and delete all red files, then everything will work so fine.
I had this happen for building my unit tests. This may have happened because I deleted the example tests.
I removed the Unit test bundle then re-added it as shown in the pictures below and all was well again.
I had a similar issue after upgrading to a new swift version recently.
Moving files around caused my xcode project to reference items that were no longer in the project directory giving me the Error Code Build Input File Not Found.
In my situation I somehow had multiple files/images that were being referenced as described below:
In the image above.
Navigate to your Targets page.
Then Click on the Build Phases tab on the top.
Scroll Down to Copy Bundle Resources
Find the affected files and remove them. (hit delete on them or select them and hit the minus button )
It was in here that I somehow had multiple files and images that were being referenced from other folders and the build would fail as they could no longer find them. And I could not find them either! or how Xcode was still referencing them
I hope this helps someone else !
This worked for me
try deleting the red colored files
delete the files in derived data
clean the build folder
then try building by using "new build system" from file->workspace settings
I had the same issue. The problem was that I didn't have any file under the Target > Build Phases > Compile Sources. The problem was solved after I added at leas one file to Compile Sources.
Not that I did anything wrong, but I ran into this issue for a completely different reason and kinda know what caused this.
I previously used finder and dragged a file into my project's directory/folder. I didn't drag into Xcode. To make Xcode include that file into the project, I had to drag it into Xcode myself later again.
But when I switched to a new branch which didn't have that file (nor it needed to), Xcode was giving me this error:
Build input file cannot be found:
'/Users/honey/Documents/xp/xpios/powerup/Models
Extensions/CGSize+Extension.swift'
I did clean build folder and delete my derived data, but it didn't work until I restarted my Xcode.
In my case, the file (and the directory) that XCode was mentioning was incorrect, and the issue started occurring after a Git merge with a relatively huge branch. To fix the same, I did the following steps:
Searched for the file in the directory system of XCode.
Found the errored file highlighted in red (i.e, it was missing).
Right clicked on the file and removed the file.
I tried building my code again, and voila, it was successful.
I hope these steps help someone out.
What Xcode was complaining about was a XIB file I got it working by going to Project -> Build Phases -> Copy Bundle Resources, removing the "problematic" XIB, cleaning (CMD+Shift+K), building and adding it back again.
There is also one possibility that sometimes when you move your files to different folder and especially when you move your info.plist to other folder, you need to define the location of that file. To solve this problem, simply click on your project blue icon on the top, and you will see a button in place of project name and bundle id, click on it and locate the info.plist file there, clean and compile happily.
I ran into this problem soon after upgrading to Xcode 10, but that was not the issue.
I tried changing the build system, but that gave me a separate error that meant the same thing. Generally saying "File X can not be found".
There are multiple things to check when a file can not be found.
Recovered references Folder
Apple does this nice thing where if it detects a reference to a file that doesn't exists it will add this reference into a group called "Recovered References"
That is nice of Apple but it doesn't always work.
Build Phases Compile Sources
In this list, there could be meta data for a file that the project is suppose to compile, but the file does not actually exists and it's attempting to find the file at the given path. In this list it will be dimmed out, delete them and re-add them by toggling the file's target dependencies or manually removing it and dragging it in.
File's Path
Double check the file path that the error is printing out and the file path for the file in finder. You can easily see this by clicking on the file in Xcode and checking the "Show the file inspector" tab (the left most tab). If these paths are correct then you are good!
Dimmed out files in your project that are not in recovered references or red
This one pissed me off because it's not obvious about what happened, but basically if you go into finder and move a file to a different location with out updating the reference in the project it will throw the error as the file no longer exists there. The only indication I have found for that is that the file in the "Project Navigator" tab (left most tab) is very slightly dimmed, but when you go to delete this file Xcode doesn't prompt you to delete the reference or send to trash. You can fix this by deleting the file and re-adding it to the project or going to the "File Inspector" tab and click the folder icon next to the path and change it to the proper location.
Either way, the error indicates that it can't find a file, switching to the old build system is a bandaid for a more concrete issue. We as developers understand that a compiler just wants an artifact to be listed at the end of a file path. Somewhere the path is not correct! We have to find where that is!
My issue was resolved with item 4 listed above. Hope this helps somebody.
In my case I accidentally deleted one third-party xcodeproj folder I used in my app.
If you tried profiling, and then it didn't work, and now you cannot build, go into your Target pane (via the Project Icon), Switch to the Build Settings tab, search for PROFILE - and set CLANG_USE_OPTIMIZATION_PROFILE to "No".
In my case, I had created a new test target and deleted the default swift file so it was left with just the info.plist. Adding a new file fixed this.
The "Legacy Build System" solution didn't work for me. What worked it was:
Clean project and remove "DerivedData".
Remove input files not found from project (only references, don't delete files).
Build (=> will generate errors related to missing files).
Add files again to project.
Build (=> should SUCCEED).
I know that this is an old subject, but I found the issue with xcode 12.3 and was related to an error while doing the CopyPlist of the main.Storyboard during compilation.
Actually, changing the build settings to "Legacy Build Setting" worked, but it is deprecated, so I discarded it because is a short term solution.
Check this:
With that setting, worked for me. Before I had "Copy plist".
After struggling with this issue for about 45mins, here is a super easy solution that worked for me.
On the project explorer, click on the file/folder that is in red colour (means project is not able to locate the file)
Look at the details tab in the file inspector (generally to the right of the screen - see the attached screenshot)
Click on the folder icon and locate the real file/folder in your local machine.
That is it. This should do the trick. Basically help your xcode locate the directories and update the reference cache.
Random, for Cocoapods: I hadn't added my test target to my Podfile.
I am having a small project just for testing. After a few days of testing the "indexing process" of Xcode broke, it simply does not finish. I tried it with another project, same thing. I tried to reinstall Xcode -> Did not help, I deleted the Derived Data -> Did not help. Restarting Mac + Xcode -> Did not help. Is there anything else I could try ? Thanks for every tip, this problem really kills the dev process.
Apparently the following has worked for several people.... Hope it helps you! PS:I'm trying it right now
Open your Project Folder.
Find ProjectName.xcodeproj file.
Right-Click Copy and Paste to Safe Place.
Right-Click Show Package Contents.
Find project.xcworkspace file and delete that file.
Reopen Your Project and clean and Rebuild.
If your problem is not solved than replace the file with your backup file.
In my case, I solved that problem by just closing assistance editor and selecting another source file in Xcode. It was useless to empty /DerivedData folder, cleaning project, rebooting OS or reverting to the previous project. After closing assistance editor and selecting another source file in the project navigator, Xcode successfully completed the indexing. Before then I opened Info.plist with viewController.m source file in Assistance Editor. My Xcode version is 9.4.1.
I put some files on the same level of *.xcodeproj file carelessly. When I move these files into the right location in Finder， Xcode tells me that these files are missing. So I delete the group which contains these files whose names have been read (I realize it is a mistake). And I drag these files from Finder into the xcode to build a new group. But when I try to run the project, Xcode still can't find these code. How can I solve the problem?
When you see a file that is red (or in the wrong place), you can easily correct the location of these files by using the file inspector (which appears along the right side panel of your Xcode window).
It looks like this:
Clicking on the Folder icon next to the name will bring up an open panel from which you can choose the correct location of the file.
There is an easier way to re-organize files through the Xcode project. You can use Synx, it automatically fixes file paths, through the Xcode project groups.
You can check Github page for Synx
Synx
After intalling Synx just run the command below
synx path/to/my/project.xcodeproj
I found the answer.
3 things
1
removed the reference to the red files
then dragged them back into the project
relinked all my .m and .h files just incase
2
then removed the .app reference and dragged it back in to the project.
3
removed any duplicates or red files in the build phases
Fixed
Thanks everyone for your suggestions and help
From my point of view i would definitely avoid the virtual folders in the Xcode.The disadventage of this approach is whe nthe project gets bigger and bigger you can not find corresponding files in your filesystem easy.Even you click on "Show in finder" you need to look for the file among tens of files.
My approach is creating the folder in the finder and then dragging it to project.when i need to create a new file in this subfolder is will be added there anyhow.
Drag the new files from the finder to the Xcode project file structure.
Remove the old files.
I had a lot of class and find a good solution for solve this problem :)
1- Select a file that you want to change the location (Red)
2- Select "show the file inspector" from right side in Xcode
3- Select wrong path or unexpected path and copy like this screenshot
4- Close your project
5- Go to your root project and right click on "project *.xcodeproj" and select "Show package contents"
6- Right click on "project.pbxproj" and open with TextEdit
7- In the file select "Find and replace" or click on " Option+Command+F " and find location that you copied and replace with "" empty
8- Save and open the Xcode :)
I'm not able to refresh file list in Project Navigator. There is no refresh button, and I don't think restarting Xcode should be the solution.
How do you see files that you add externally? I'm on Mac.
How do you see files that you add externally?
Files cannot be added externally. Dumping a source file into the project directory does not add it to the project. To add a file you must add it to the project from within Xcode.
If you have a bunch of files that you need to add then in the Add File dialog you can just select all the files you want at once and add them, without having to repeatedly open the Add File dialog. Just use control clicking to select multiple files.
Close and reopen the project, if necessary.
This may be required if you are using folder references (as one example). In that case, touching the directory might work to refresh what Xcode displays.
For a single file, you can open the external file in Xcode and cmd+s to save it, it will be refreshed in Xcode.
Also, for the quick way you can just chose the external folder in Xcode and cmd+s, it will refresh all your external file in this folder.
File > Add files to "Runner" 👍
I don't think you can refresh the Project navigator to detect files that have been modified outside of Xcode, and that instead you need to manually add or delete files from the Project navigator with "right-click" / two-finger tap.
Some other solutions suggested:
File > Add Files to "Runner"... but that doesn't delete files
Open and close Xcode, but that's not practical. It also did not work for me.
Use cmd+s, but Xcode does not detect files which need to be saved. And so, that also did not work for me.
You can just press "Command + B", for refresh your project in xcode