What I want is pretty simple. Given a string 'this is my test string,' I want to return the substring from the 2nd position to the 2nd to last position. Something like:
substring 'this is my test string' 1,-1. I know I can get stuff from the beginning of the string using cut, but I'm not sure how I can calculate easily from the end of the string. Help?
Turns out I can do this with awk pretty easily as follows:
echo 'this is my test string' | awk '{ print substr( $0, 2, length($0)-2 ) }'
Be cleaner in awk, python, perl, etc. but here's one way to do it:
#!/usr/bin/bash
msg="this is my test string"
start=2
len=$((${#msg} - ${start} - 2))
echo $len
echo ${msg:2:$len}
results in is is my test stri
You can do this with just pure bash
$ string="i.am.a.stupid.fool.are.you?"
$ echo ${string: 2:$((${#string}-4))}
am.a.stupid.fool.are.yo
Look ma, no global variables or forks (except for the obvious printf) and thoroughly tested:
substring()
{
# Extract substring with positive or negative indexes
# #param $1: String
# #param $2: Start (default start of string)
# #param $3: Length (default until end of string)
local -i strlen="${#1}"
local -i start="${2-0}"
local -i length="${3-${#1}}"
if [[ "$start" -lt 0 ]]
then
let start+=$strlen
fi
if [[ "$length" -lt 0 ]]
then
let length+=$strlen
let length-=$start
fi
if [[ "$length" -lt 0 ]]
then
return
fi
printf %s "${1:$start:$length}"
}
Related
This code check if the last 4 characters of the variable $1 correspond to the string in variable $2 anticipated by a dot.
if [ "${1: -4}" == ".$2" ]; then
return 0
else
return 1
fi
// true with $1 = example.doc and $2 = doc
// false with $1 = example.docx and $2 = doc
how can I replace the hardcoded 4 with the following variable $CHECKER_EXTENSION calculated like this?
LENGTH_EXTENSION=${#2}
CHECKER_EXTENSION=$(( LENGTH_EXTENSION + 1 ))
Thanks in advance
You don't need to strip the leading characters from $1, since bash's [[ ]] can do wildard-style pattern matching:
if [[ "$1" = *".$2" ]]; then
...
Note that you must use [[ ]], and not [ ], to get pattern-matching rather than simple string equality testing. Also, having the * unquoted but .$2 in quotes means the * will be treated as a wildcard, but $2 will be matched literally even if it contains wildcardish characters. If you want $2 to also be treated as a pattern (e.g. you could use [Jj][Pp][Gg] to match "jpg" and "JPG" and combinations), leave off the quotes:
if [[ "$1" = *.$2 ]]; then
Oh, and the quotes around $1 don't matter in this particular situation; but I tend to double-quote variables unless there's a specific reason not to.
The offset is interpreted as an arithmetic expression (the same syntax as inside $(( ... ))), so you can write:
if [ "${1: -CHECKER_EXTENSION}" == ".$2" ]; then
You can even eliminate the CHECKER_EXTENSION variable and write:
if [ "${1: -(${#2} + 1)}" == ".$2" ]; then
You may use it like this:
myfunc() {
local num_ext=$(( ${#2} + 1 ))
[[ "${1: -$num_ext}" = ".$2" ]]
}
If your execution environment meets the following criteria, you can choose a more concise method.
The requirement is to check if the extension is as expected
I'm using Bash
#!/usr/bin/env bash
if [[ ${1##*.} == "${2}" ]]; then
echo "same"
else
echo "not same"
fi
Execute test.
# test case 1
$ ./sample.sh test.txt txt
same
# test case 2
$ ./sample.sh test.exe txt
not same
# test case 3
$ ./sample.sh test.exe.txt txt
same
# test case 4
$ ./sample.sh test.txt.exe txt
not same
# test case 5
$ ./sample.sh test.txt.exe exe
same
Basically i need to create a function where an argument is passed, and i need to update the number so for example the argument would be
version_2 and after the function it would change it to version_3
just increments by one
in java I would just create a new string, and grab the last character update by one and append but not sure how to do it in bash.
updateVersion() {
version=$1
}
the prefix can be anything for example it can be dog12 or dog_12 and always has one number to update.
after the update it would be dog13 or dog_13 respectively.
updateVersion()
{
[[ $1 =~ ([^0-9]*)([0-9]+) ]] || { echo 'invalid input'; exit; }
echo "${BASH_REMATCH[1]}$(( ${BASH_REMATCH[2]} + 1 ))"
}
# Usage
updateVersion version_11 # output: version_12
updateVersion version11 # output: version12
updateVersion something_else123 # output: something_else124
updateVersion "with spaces 99" # output: with spaces 100
# Putting it in a variable
v2="$(updateVersion version2)"
echo "$v2" # output: version3
Use parameter expansion:
#! /bin/bash
shopt -s extglob
for version in version_1 version_19 version_34.14 ; do
echo $version
v=${version##*[^0-9]}
((++v))
echo ${version%%+([0-9])}$v
done
extglob is needed for the +([0-9]) construct which means "one or more digits".
incrementTrailingNumber() {
local prefix number
if [[ $1 =~ ^(.*[^[:digit:]])([[:digit:]]+)$ ]]; then
prefix=${BASH_REMATCH[1]}
number=${BASH_REMATCH[2]}
printf '%s%s\n' "$prefix" "$(( number + 1 ))"
else
printf '%s\n' "$1"
fi
}
Usage as:
$ incrementTrailingNumber version_30
version_31
$ incrementTrailingNumber foo-2.15
foo-2.16
$ incrementTrailingNumber noNumberHereAtAll # demonstrate noop case
noNumberHereAtAll
Late to the party here, but there is an issue with the accepted answer. It works for the OP's case where there are no numbers before the end, but I had an example like this:
1.0.143
For that, the regexp needs to be a bit looser. Here's how I did it, preserving leading zeroes:
#!/usr/bin/env bash
updateVersion()
{
[[ ${1} =~ ^(.*[^0-9])?([0-9]+)$ ]] && \
[[ ${#BASH_REMATCH[1]} -gt 0 ]] && \
printf "%s%0${#BASH_REMATCH[2]}d" "${BASH_REMATCH[1]}" "$((10#${BASH_REMATCH[2]} + 1 ))" || \
printf "%0${#BASH_REMATCH[2]}d" "$((10#${BASH_REMATCH[2]} + 1))" || \
printf "${1}"
}
# Usage
updateVersion 09 # output 10
updateVersion 1.0.450 # output 1.0.451
updateVersion version_01 # output version_02
updateVersion version12 # output version13
updateVersion version19 # output version20
Notes:
You only need to double-quote the first argument to printf.
Replace ${1} with content in "" if you want to use it on a command line,
instead of in a function.
You can switch the last printf to a basic echo if you prefer. If you are just printing to stdout or stderr, consider adding a newline (\n) at the end of each printf.
You can combine the function content into a single line, but it's harder to read. It's better to break it into lines with \ at every if (&&) and else (||), as above.
What the function does - line by line:
Test the passed value ends with a number of one or more digits, optionally prefixed by at least one non-number. Split into two groups accordingly (indexing is 1-based).
When ending in a number, test there is a non-numeric prefix (i.e. length of group 1 > 0).
When there are non-numerics, print group 1 (a string) followed by group 2 (an integer padded with zeroes to match the original string size). Group 2 is base-10 converted and incremented by 1. The conversion is important - leading zeroes are interpreted as octal by default.
When there are only numbers, increment as above but just print group 2.
If the input is anything else, return the supplied string.
I want to take the absolute of a number by the following code in bash:
#!/bin/bash
echo "Enter the first file name: "
read first
echo "Enter the second file name: "
read second
s1=$(stat --format=%s "$first")
s2=$(stat -c '%s' "$second")
res= expr $s2 - $s1
if [ "$res" -lt 0 ]
then
res=$res \* -1
fi
echo $res
Now the problem I am facing is in the if statement, no matter what I changes it always goes in the if, I tried to put [[ ]] around the statement but nothing.
Here is the error:
./p6.sh: line 13: [: : integer expression expected
You might just take ${var#-}.
${var#Pattern} Remove from $var the shortest part of $Pattern that matches the front end of $var. tdlp
Example:
s2=5; s1=4
s3=$((s1-s2))
echo $s3
-1
echo ${s3#-}
1
$ s2=5 s1=4
$ echo $s2 $s1
5 4
$ res= expr $s2 - $s1
1
$ echo $res
What's actually happening on the fourth line is that res is being set to nothing and exported for the expr command. Thus, when you run [ "$res" -lt 0 ] res is expanding to nothing and you see the error.
You could just use an arithmetic expression:
$ (( res=s2-s1 ))
$ echo $res
1
Arithmetic context guarantees the result will be an integer, so even if all your terms are undefined to begin with, you will get an integer result (namely zero).
$ (( res = whoknows - whocares )); echo $res
0
Alternatively, you can tell the shell that res is an integer by declaring it as such:
$ declare -i res
$ res=s2-s1
The interesting thing here is that the right hand side of an assignment is treated in arithmetic context, so you don't need the $ for the expansions.
I know this thread is WAY old at this point, but I wanted to share a function I wrote that could help with this:
abs() {
[[ $[ $# ] -lt 0 ]] && echo "$[ ($#) * -1 ]" || echo "$[ $# ]"
}
This will take any mathematical/numeric expression as an argument and return the absolute value. For instance: abs -4 => 4 or abs 5-8 => 3
A workaround: try to eliminate the minus sign.
with sed
x=-12
x=$( sed "s/-//" <<< $x )
echo $x
12
Checking the first character with parameter expansion
x=-12
[[ ${x:0:1} = '-' ]] && x=${x:1} || :
echo $x
12
This syntax is a ternary opeartor. The colon ':' is the do-nothing instruction.
or substitute the '-' sign with nothing (again parameter expansion)
x=-12
echo ${x/-/}
12
Personally, scripting bash appears easier to me when I think string-first.
I translated this solution to bash. I like it more than the accepted string manipulation method or other conditionals because it keeps the abs() process inside the mathematical section
abs_x=$(( x * ((x>0) - (x<0)) ))
x=-3
abs_x= -3 * (0-1) = 3
x=4
abs_x= 4 * (1-0) = 4
For the purist, assuming bash and a relatively recent one (I tested on 4.2 and 5.1):
abs() {
declare -i _value
_value=$1
(( _value < 0 )) && _value=$(( _value * -1 ))
printf "%d\n" $_value
}
If you don't care about the math and only the result matters, you may use
echo $res | awk -F- '{print $NF}'
The simplest solution:
res="${res/#-}"
Deletes only one / occurrence if - is at the first # character.
In my script I need to expand an interval, e.g.:
input: 1,5-7
to get something like the following:
output: 1,5,6,7
I've found other solutions here, but they involve python and I can't use it in my script.
Solution with Just Bash 4 Builtins
You can use Bash range expansions. For example, assuming you've already parsed your input you can perform a series of successive operations to transform your range into a comma-separated series. For example:
value1=1
value2='5-7'
value2=${value2/-/..}
value2=`eval echo {$value2}`
echo "input: $value1,${value2// /,}"
All the usual caveats about the dangers of eval apply, and you'd definitely be better off solving this problem in Perl, Ruby, Python, or AWK. If you can't or won't, then you should at least consider including some pipeline tools like tr or sed in your conversions to avoid the need for eval.
Try something like this:
#!/bin/bash
for f in ${1//,/ }; do
if [[ $f =~ - ]]; then
a+=( $(seq ${f%-*} 1 ${f#*-}) )
else
a+=( $f )
fi
done
a=${a[*]}
a=${a// /,}
echo $a
Edit: As #Maxim_united mentioned in the comments, appending might be preferable to re-creating the array over and over again.
This should work with multiple ranges too.
#! /bin/bash
input="1,5-7,13-18,22"
result_str=""
for num in $(tr ',' ' ' <<< "$input"); do
if [[ "$num" == *-* ]]; then
res=$(seq -s ',' $(sed -n 's#\([0-9]\+\)-\([0-9]\+\).*#\1 \2#p' <<< "$num"))
else
res="$num"
fi
result_str="$result_str,$res"
done
echo ${result_str:1}
Will produce the following output:
1,5,6,7,13,14,15,16,17,18,22
expand_commas()
{
local arg
local st en i
set -- ${1//,/ }
for arg
do
case $arg in
[0-9]*-[0-9]*)
st=${arg%-*}
en=${arg#*-}
for ((i = st; i <= en; i++))
do
echo $i
done
;;
*)
echo $arg
;;
esac
done
}
Usage:
result=$(expand_commas arg)
eg:
result=$(expand_commas 1,5-7,9-12,3)
echo $result
You'll have to turn the separated words back into commas, of course.
It's a bit fragile with bad inputs but it's entirely in bash.
Here's my stab at it:
input=1,5-7,10,17-20
IFS=, read -a chunks <<< "$input"
output=()
for chunk in "${chunks[#]}"
do
IFS=- read -a args <<< "$chunk"
if (( ${#args[#]} == 1 )) # single number
then
output+=(${args[*]})
else # range
output+=($(seq "${args[#]}"))
fi
done
joined=$(sed -e 's/ /,/g' <<< "${output[*]}")
echo $joined
Basically split on commas, then interpret each piece. Then join back together with commas at the end.
A generic bash solution using the sequence expression `{x..y}'
#!/bin/bash
function doIt() {
local inp="${#/,/ }"
declare -a args=( $(echo ${inp/-/..}) )
local item
local sep
for item in "${args[#]}"
do
case ${item} in
*..*) eval "for i in {${item}} ; do echo -n \${sep}\${i}; sep=, ; done";;
*) echo -n ${sep}${item};;
esac
sep=,
done
}
doIt "1,5-7"
Should work with any input following the sample in the question. Also with multiple occurrences of x-y
Use only bash builtins
Using ideas from both #Ansgar Wiechers and #CodeGnome:
input="1,5-7,13-18,22"
for s in ${input//,/ }
do
if [[ $f =~ - ]]
then
a+=( $(eval echo {${s//-/..}}) )
else
a+=( $s )
fi
done
oldIFS=$IFS; IFS=$','; echo "${a[*]}"; IFS=$oldIFS
Works in Bash 3
Considering all the other answers, I came up with this solution, which does not use any sub-shells (but one call to eval for brace expansion) or separate processes:
# range list is assumed to be in $1 (e.g. 1-3,5,9-13)
# convert $1 to an array of ranges ("1-3" "5" "9-13")
IFS=,
local range=($1)
unset IFS
list=() # initialize result list
local r
for r in "${range[#]}"; do
if [[ $r == *-* ]]; then
# if the range is of the form "x-y",
# * convert to a brace expression "{x..y}",
# * using eval, this gets expanded to "x" "x+1" … "y" and
# * append this to the list array
eval list+=( {${r/-/..}} )
else
# otherwise, it is a simple number and can be appended to the array
list+=($r)
fi
done
# test output
echo ${list[#]}
I have a bash script that is being used in a CGI. The CGI sets the $QUERY_STRING environment variable by reading everything after the ? in the URL. For example, http://example.com?a=123&b=456&c=ok sets QUERY_STRING=a=123&b=456&c=ok.
Somewhere I found the following ugliness:
b=$(echo "$QUERY_STRING" | sed -n 's/^.*b=\([^&]*\).*$/\1/p' | sed "s/%20/ /g")
which will set $b to whatever was found in $QUERY_STRING for b. However, my script has grown to have over ten input parameters. Is there an easier way to automatically convert the parameters in $QUERY_STRING into environment variables usable by bash?
Maybe I'll just use a for loop of some sort, but it'd be even better if the script was smart enough to automatically detect each parameter and maybe build an array that looks something like this:
${parm[a]}=123
${parm[b]}=456
${parm[c]}=ok
How could I write code to do that?
Try this:
saveIFS=$IFS
IFS='=&'
parm=($QUERY_STRING)
IFS=$saveIFS
Now you have this:
parm[0]=a
parm[1]=123
parm[2]=b
parm[3]=456
parm[4]=c
parm[5]=ok
In Bash 4, which has associative arrays, you can do this (using the array created above):
declare -A array
for ((i=0; i<${#parm[#]}; i+=2))
do
array[${parm[i]}]=${parm[i+1]}
done
which will give you this:
array[a]=123
array[b]=456
array[c]=ok
Edit:
To use indirection in Bash 2 and later (using the parm array created above):
for ((i=0; i<${#parm[#]}; i+=2))
do
declare var_${parm[i]}=${parm[i+1]}
done
Then you will have:
var_a=123
var_b=456
var_c=ok
You can access these directly:
echo $var_a
or indirectly:
for p in a b c
do
name="var$p"
echo ${!name}
done
If possible, it's better to avoid indirection since it can make code messy and be a source of bugs.
you can break $QUERY down using IFS. For example, setting it to &
$ QUERY="a=123&b=456&c=ok"
$ echo $QUERY
a=123&b=456&c=ok
$ IFS="&"
$ set -- $QUERY
$ echo $1
a=123
$ echo $2
b=456
$ echo $3
c=ok
$ array=($#)
$ for i in "${array[#]}"; do IFS="=" ; set -- $i; echo $1 $2; done
a 123
b 456
c ok
And you can save to a hash/dictionary in Bash 4+
$ declare -A hash
$ for i in "${array[#]}"; do IFS="=" ; set -- $i; hash[$1]=$2; done
$ echo ${hash["b"]}
456
Please don't use the evil eval junk.
Here's how you can reliably parse the string and get an associative array:
declare -A param
while IFS='=' read -r -d '&' key value && [[ -n "$key" ]]; do
param["$key"]=$value
done <<<"${QUERY_STRING}&"
If you don't like the key check, you could do this instead:
declare -A param
while IFS='=' read -r -d '&' key value; do
param["$key"]=$value
done <<<"${QUERY_STRING:+"${QUERY_STRING}&"}"
Listing all the keys and values from the array:
for key in "${!param[#]}"; do
echo "$key: ${param[$key]}"
done
I packaged the sed command up into another script:
$cat getvar.sh
s='s/^.*'${1}'=\([^&]*\).*$/\1/p'
echo $QUERY_STRING | sed -n $s | sed "s/%20/ /g"
and I call it from my main cgi as:
id=`./getvar.sh id`
ds=`./getvar.sh ds`
dt=`./getvar.sh dt`
...etc, etc - you get idea.
works for me even with a very basic busybox appliance (my PVR in this case).
To converts the contents of QUERY_STRING into bash variables use the following command:
eval $(echo ${QUERY_STRING//&/;})
The inner step, echo ${QUERY_STRING//&/;}, substitutes all ampersands with semicolons producing a=123;b=456;c=ok which the eval then evaluates into the current shell.
The result can then be used as bash variables.
echo $a
echo $b
echo $c
The assumptions are:
values will never contain '&'
values will never contain ';'
QUERY_STRING will never contain malicious code
While the accepted answer is probably the most beautiful one, there might be cases where security is super-important, and it needs to be also well-visible from your script.
In such a case, first I wouldn't use bash for the task, but if it should be done on some reason, it might be better to avoid these new array - dictionary features, because you can't be sure, how exactly are they escaped.
In this case, the good old primitive solutions might work:
QS="${QUERY_STRING}"
while [ "${QS}" != "" ]
do
nameval="${QS%%&*}"
QS="${QS#$nameval}"
QS="${QS#&}"
name="${nameval%%=*}"
val="${nameval#$name}"
val="${nameval#=}"
# and here we have $name and $val as names and values
# ...
done
This iterates on the name-value pairs of the QUERY_STRING, and there is no way to circumvent it with any tricky escape sequence - the " is a very strong thing in bash, except a single variable name substitution, which is fully controlled by us, nothing can be tricked.
Furthermore, you can inject your own processing code into "# ...". This enables you to allow only your own, well-defined (and, ideally, short) list of the allowed variable names. Needless to say, LD_PRELOAD shouldn't be one of them. ;-)
Furthermore, no variable will be exported, and exclusively QS, nameval, name and val is used.
Following the correct answer, I've done myself some changes to support array variables like in this other question. I added also a decode function of which I can not find the author to give some credit.
Code appears somewhat messy, but it works. Changes and other recommendations would be greatly appreciated.
function cgi_decodevar() {
[ $# -ne 1 ] && return
local v t h
# replace all + with whitespace and append %%
t="${1//+/ }%%"
while [ ${#t} -gt 0 -a "${t}" != "%" ]; do
v="${v}${t%%\%*}" # digest up to the first %
t="${t#*%}" # remove digested part
# decode if there is anything to decode and if not at end of string
if [ ${#t} -gt 0 -a "${t}" != "%" ]; then
h=${t:0:2} # save first two chars
t="${t:2}" # remove these
v="${v}"`echo -e \\\\x${h}` # convert hex to special char
fi
done
# return decoded string
echo "${v}"
return
}
saveIFS=$IFS
IFS='=&'
VARS=($QUERY_STRING)
IFS=$saveIFS
for ((i=0; i<${#VARS[#]}; i+=2))
do
curr="$(cgi_decodevar ${VARS[i]})"
next="$(cgi_decodevar ${VARS[i+2]})"
prev="$(cgi_decodevar ${VARS[i-2]})"
value="$(cgi_decodevar ${VARS[i+1]})"
array=${curr%"[]"}
if [ "$curr" == "$next" ] && [ "$curr" != "$prev" ] ;then
j=0
declare var_${array}[$j]="$value"
elif [ $i -gt 1 ] && [ "$curr" == "$prev" ]; then
j=$((j + 1))
declare var_${array}[$j]="$value"
else
declare var_$curr="$value"
fi
done
I would simply replace the & to ;. It will become to something like:
a=123;b=456;c=ok
So now you need just evaluate and read your vars:
eval `echo "${QUERY_STRING}"|tr '&' ';'`
echo $a
echo $b
echo $c
A nice way to handle CGI query strings is to use Haserl which acts as a wrapper around your Bash cgi script, and offers convenient and secure query string parsing.
To bring this up to date, if you have a recent Bash version then you can achieve this with regular expressions:
q="$QUERY_STRING"
re1='^(\w+=\w+)&?'
re2='^(\w+)=(\w+)$'
declare -A params
while [[ $q =~ $re1 ]]; do
q=${q##*${BASH_REMATCH[0]}}
[[ ${BASH_REMATCH[1]} =~ $re2 ]] && params+=([${BASH_REMATCH[1]}]=${BASH_REMATCH[2]})
done
If you don't want to use associative arrays then just change the penultimate line to do what you want. For each iteration of the loop the parameter is in ${BASH_REMATCH[1]} and its value is in ${BASH_REMATCH[2]}.
Here is the same thing as a function in a short test script that iterates over the array outputs the query string's parameters and their values
#!/bin/bash
QUERY_STRING='foo=hello&bar=there&baz=freddy'
get_query_string() {
local q="$QUERY_STRING"
local re1='^(\w+=\w+)&?'
local re2='^(\w+)=(\w+)$'
while [[ $q =~ $re1 ]]; do
q=${q##*${BASH_REMATCH[0]}}
[[ ${BASH_REMATCH[1]} =~ $re2 ]] && eval "$1+=([${BASH_REMATCH[1]}]=${BASH_REMATCH[2]})"
done
}
declare -A params
get_query_string params
for k in "${!params[#]}"
do
v="${params[$k]}"
echo "$k : $v"
done
Note the parameters end up in the array in reverse order (it's associative so that shouldn't matter).
why not this
$ echo "${QUERY_STRING}"
name=carlo&last=lanza&city=pfungen-CH
$ saveIFS=$IFS
$ IFS='&'
$ eval $QUERY_STRING
$ IFS=$saveIFS
now you have this
name = carlo
last = lanza
city = pfungen-CH
$ echo "name is ${name}"
name is carlo
$ echo "last is ${last}"
last is lanza
$ echo "city is ${city}"
city is pfungen-CH
#giacecco
To include a hiphen in the regex you could change the two lines as such in answer from #starfry.
Change these two lines:
local re1='^(\w+=\w+)&?'
local re2='^(\w+)=(\w+)$'
To these two lines:
local re1='^(\w+=(\w+|-|)+)&?'
local re2='^(\w+)=((\w+|-|)+)$'
For all those who couldn't get it working with the posted answers (like me),
this guy figured it out.
Can't upvote his post unfortunately...
Let me repost the code here real quick:
#!/bin/sh
if [ "$REQUEST_METHOD" = "POST" ]; then
if [ "$CONTENT_LENGTH" -gt 0 ]; then
read -n $CONTENT_LENGTH POST_DATA <&0
fi
fi
#echo "$POST_DATA" > data.bin
IFS='=&'
set -- $POST_DATA
#2- Value1
#4- Value2
#6- Value3
#8- Value4
echo $2 $4 $6 $8
echo "Content-type: text/html"
echo ""
echo "<html><head><title>Saved</title></head><body>"
echo "Data received: $POST_DATA"
echo "</body></html>"
Hope this is of help for anybody.
Cheers
Actually I liked bolt's answer, so I made a version which works with Busybox as well (ash in Busybox does not support here string).
This code will accept key1 and key2 parameters, all others will be ignored.
while IFS= read -r -d '&' KEYVAL && [[ -n "$KEYVAL" ]]; do
case ${KEYVAL%=*} in
key1) KEY1=${KEYVAL#*=} ;;
key2) KEY2=${KEYVAL#*=} ;;
esac
done <<END
$(echo "${QUERY_STRING}&")
END
One can use the bash-cgi.sh, which processes :
the query string into the $QUERY_STRING_GET key and value array;
the post request data (x-www-form-urlencoded) into the $QUERY_STRING_POST key and value array;
the cookies data into the $HTTP_COOKIES key and value array.
Demands bash version 4.0 or higher (to define the key and value arrays above).
All processing is made by bash only (i.e. in an one process) without any external dependencies and additional processes invoking.
It has:
the check for max length of data, which can be transferred to it's input,
as well as processed as query string and cookies;
the redirect() procedure to produce redirect to itself with the extension changed to .html (it is useful for an one page's sites);
the http_header_tail() procedure to output the last two strings of the HTTP(S) respond's header;
the $REMOTE_ADDR value sanitizer from possible injections;
the parser and evaluator of the escaped UTF-8 symbols embedded into the values passed to the $QUERY_STRING_GET, $QUERY_STRING_POST and $HTTP_COOKIES;
the sanitizer of the $QUERY_STRING_GET, $QUERY_STRING_POST and $HTTP_COOKIES values against possible SQL injections (the escaping like the mysql_real_escape_string php function does, plus the escaping of # and $).
It is available here:
https://github.com/VladimirBelousov/fancy_scripts
This works in dash using for in loop
IFS='&'
for f in $query_string; do
value=${f##*=}
key=${f%%=*}
# if you need environment variable -> eval "qs_$key=$value"
done