I have <MvcBuildViews>true</MvcBuildViews> setup in my project files.
Now when I do deployment the first time I get files in obj\release\package\packagetmp. Every subsequent build after this results in a faild build.
Web -> C:\Projects\ProjectX\Web\bin\ProjectX.Web.dll
C:\Projects\ProjectX\Web\obj\release\package\packagetmp\web.config(64):
error ASPCONFIG: It is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level.
This error can be caused by a virtual directory not being configured as an
application in IIS.
------ Skipped Publish: Project Web, Configuration: Release Any CPU ------
Now if delete the obj folder, I can build fine.
This is rather frustrating to have any build fail after I publish until I manually delete the obj folder. Is there anything I can do to fix this?
Add this to the .csproj file:
<Target Name="AfterBuild" Condition="'$(Configuration)'=='Release'">
<RemoveDir Directories="$(IntermediateOutputPath)" />
</Target>
Seems to delete the files in obj\Release but not the folder itself, at least on my machine.
This problem occurs because MvcBuildViews conflicts with Web Deploy packaging. I got the idea for this solution from http://www.zvolkov.com/clog/2011/02/16/asp-net-razor-lessons-learned/ :
<PropertyGroup>
<PackageDependsOn Condition="'$(DeployOnBuild)'=='true'">
CleanWebsitesPackage;
CleanWebsitesPackageTempDir;
CleanWebsitesTransformParametersFiles;
MvcBuildViews;
$(PackageDependsOn)
</PackageDependsOn>
<BuildDependsOn Condition="'$(DeployOnBuild)'!='true'">
$(BuildDependsOn);
MvcBuildViews
</BuildDependsOn>
</PropertyGroup>
<Target Name="MvcBuildViews" Condition="'$(MvcBuildViews)'=='true'">
<AspNetCompiler VirtualPath="temp" PhysicalPath="$(WebProjectOutputDir)" />
</Target>
Now AspNetCompiler will run before packaging. This works nicely with the msbuild /p:DeployOnBuild=True /p:DeployTarget=Package approach.
This is a known issue with MVC when you enable the build MVC views feature. Hopefully they get it fixed in the next version.
In the mean time, you can run the "Clean Solution" operation to clear out the obj folder instead of doing it manually. The downside is, your entire solution will be rebuilt every time.
Another option that I haven't done, but have considered if my project gets any bigger, is a pre-compile step in the MVC project to remove the web.config from obj\
Related
I have a publish profile Staging.pubxml created for a console project (.NET Core 2.1), as follows:
<?xml version="1.0" encoding="utf-8"?>
<!--
https://go.microsoft.com/fwlink/?LinkID=208121.
-->
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<PublishProtocol>FileSystem</PublishProtocol>
<Configuration>Staging</Configuration>
<Platform>Any CPU</Platform>
<TargetFramework>netcoreapp2.1</TargetFramework>
<PublishDir>bin\Release\netcoreapp2.1\publish\</PublishDir>
<SelfContained>false</SelfContained>
<_IsPortable>true</_IsPortable>
</PropertyGroup>
<Target Name="CustomActionsAfterPublish" AfterTargets="AfterPublish">
<Message Text="First occurrence" Importance="high" />
</Target>
</Project>
When I publish it (via VS2019); publish completes successfully. Yet I'am not seeing the text: First occurrence in the output window.
In VS, MSBuild output verbosity is set to Diagnostic.
Am I doing this wrong?
Am I doing this wrong?
1.Hi friend, the .pubxml file is not a good place to define custom Target.
According to your target name, you want to run the target after build target. For this situation: always we define the custom target in project file. Please try right-click your project and choose edit xxx.csproj, and add the target into it. Then reload the project and publish, then you can find the First occurrence message in the build output.
And after my test, in.csproj file, the target can't be named AfterBuild, you can change it to:
<Target Name="CustomTargetName" AfterTargets="build">
<Message Text="First occurrence" Importance="high" />
</Target>
2.Also, the way you use can work in VS2019 though we don't suggest adding it in .pubxml. But it indeed works. For the reason why you can't get the message in output window, please check if the Staging.pubxml is really called during the publish process.
(Change the value of the PublishDir to another folder, and publish it again, check if the project is published to new directory, then you'll find if the xxx.pubxml is used)
Update:
According to your .pubxml file, your project is a .net core console app instead of a asp.net core web app. This makes the difference!
I test it in both VS2017 and VS2019, and find the target works well in asp.net web app but not .net core console one. I believe for those non-web app, this kind of after publish target may not be supported.
And please check these two official documents I found:
Asp.net core: Run a target before or after publishing
.net core: Deploy .net core apps with VS
I can't find any custom-target-related info in the .net core document. So I'm afraid it might be not supported by design.
Update2:
Actually your original need is to add CopyFiles target to publish process. So I assume what you really want is to copy sth to Publish Folder after Publish process or copy sth from Publish Folder to target folder.
Though the after publish target is not supported in .net core console apps. We have corresponding workarounds:
To copy sth to Publish Folder after Publish:
For this situation, you can add a after build target to copy the files to Publish folder before publish process. I think it works for this situation:
<Target Name="CustomTarget" AfterTargets="build">
<ItemGroup>
<MySourceFiles Include="xxx\pathToTheFolderWhereYourFilesAre\*.*"/>
</ItemGroup>
<Copy
SourceFiles="#(MySourceFiles)"
DestinationFolder="$(ProjectDir)bin\Release\netcoreapp2.1\publish\"
/>
</Target>
To copy sth from Publish Folder to target folder:
For .net core console app, actually the so-called publish process is to copy files from obj folder to publish folder. See this screenShot:
Go Tools=>Options=>Project and Solutions=>Build and Run to change the build output verbosity to Detailed and you can see details in build and publish process in VS.
That's why I suggest you can Go Project=>Properties=>build events=>post-build events to use a xcopy command to copy the files to your destination folder.(Or you can use a script like above, remember to change the source path and destination path). When we want to copy the files in publish folder, actually we're trying to copy the files from obj folder. So do something after build process is enough! Not need to do it after publish process.
I'm working with Visual Studio 2017. I've inherited a web project and am trying to introduce build configurations for the config transforms. What I am finding odd is that no matter what build configuration I select, the project always compiles to the bin\ directory, no subdirectory for the build selected.
What's further strange is that I created two new web projects to discover where the problem might be and got different results. One was a .Net Core web project, which did create the Debug and Release directories when compiled under those build configurations. The other, like the inherited project, was a .Net Framework web project, and it also would only compile to the bin\ directory.
Does anyone have any idea what is going on?
While I did not discover why the configuration name was not being automatically appended to the output path during the build, nor why transforms were not being applied to the config files, I fixed the problem by hacking the project file.
For each PropertyGroup node that identified the settings to use for the build, I changed the OutputPath value from bin\ to bin\$(Configuration).
Then, I insert the following into the Project node to get the transforms to work:
<UsingTask TaskName="TransformXml" AssemblyFile="$(MSBuildExtensionsPath32)\Microsoft\VisualStudio\v$(VisualStudioVersion)\Web\Microsoft.Web.Publishing.Tasks.dll" />
<Target Name="AfterCompile" Condition="Exists('Web.$(Configuration).config')">
<TransformXml Source="Web.config" Destination="$(IntermediateOutputPath)$(TargetFileName).config" Transform="Web.$(Configuration).config" />
<ItemGroup>
<AppConfigWithTargetPath Remove="Web.config" />
<AppConfigWithTargetPath Include="$(IntermediateOutputPath)$(TargetFileName).config">
<TargetPath>$(TargetFileName).config</TargetPath>
</AppConfigWithTargetPath>
</ItemGroup>
</Target>
I'm using Visual Studio 2017 and have a solution with several web projects and webjob projects.
There are some files that I want to include when running locally in the development environment that I want to exclude from being deployed as part of a web publishing package.
I'm attempting to use the process described here http://sedodream.com/2010/05/01/WebDeploymentToolMSDeployBuildPackageIncludingExtraFilesOrExcludingSpecificFiles.aspx and elsewhere, which is:
<ItemGroup>
<ExcludeFromPackageFiles Include="connectionstrings.config">
<FromTarget>Project</FromTarget>
<CopyToOutputDirectory>Always</CopyToOutputDirectory>
</ExcludeFromPackageFiles>
</ItemGroup>
This works perfectly for my web projects - meaning that when building the connectionstrings.config file is copied to my bin\ directory and not included as part of the web deployment package - whereas when implemented in my webjob projects the file is copied to my bin\ directory but also included in the deployment package.
In the msbuild output I see:
Copying file from "C:\Users\me\Documents\Projects\myapp\myapp\webjob1\connectionstrings.config" to "bin\ProdBuildCfg\connectionstrings.config".
which is what I want because it allows me to run/debug locally, and also:
Copying C:\Users\me\Documents\Projects\myapp\myapp\webjob1\bin\ProdBuildCfg\connectionstrings.config to obj\ProdBuildCfg\Package\PackageTmp\app_data\jobs\continuous\webjob1\connectionstrings.config.
which demonstrates the problem - connectionstrings.config is still being copied to the package directory for subsequent publishing/deployment.
The process described in the above article and others applies to web projects, and they indicate you should place the <ItemGroup> under the
<Import Project="$(MSBuildExtensionsPath32)\Microsoft\VisualStudio\v10.0\WebApplications\Microsoft.WebApplication.targets" />
line of the project file. Webjob projects don't include that line but rather have something resembling:
<Import Project="..\packages\Microsoft.Web.WebJobs.Publish.1.0.13\tools\webjobs.targets" Condition="Exists('..\packages\Microsoft.Web.WebJobs.Publish.1.0.13\tools\webjobs.targets')" />
I suspect the problem relates to targets - either my project file doesn't include the proper <Import Project="...*.targets')" /> line or I'm not at the right spot in the file.
Next I tried the method mentioned here How do I include webjob files while debugging locally but exclude when publishing a web package?:
<PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
<ExcludeFilesFromDeployment>connectionstrings.config</ExcludeFilesFromDeployment>
</PropertyGroup>
I have the connectionstrings.config Build Action set to None and Copy to output directory set to Always (my understanding is that action that results from the Copy to output directory setting is distinctly different from the actions associated with packaging/deployment). Same result. (I've ensured I'm in the right <PropertyGroup> for my build configuration.
Note: I'm deploying either by right-clicking the project in VS and selecting "Publish as Azure webjob" or using an msbuild command to publish like msbuild myproj.csproj /p:DeployOnBuild=true /p:Configuration=Release /p:PublishProfile="Prod" /p:VisualStudioVersion=15.0 /p:Password=
How do I include webjob files while debugging locally but exclude when publishing a web package?
To my knowledge, if you do not want to publish any file, you just need to set the file property to "copy to output directory as DO NOT COPY". This way when you will package the application that particular file will not be part of package and will never be on Azure.
Update:
Unfortunately that setting prevents the file from being copied to the
output directory which means I can’t run or debug locally.
When you debugging the project, you can set the "copy to output directory" as "Copy always". When you want to deploy the project, you can manually clean the build and change the value to DO NOT COPY.
If you do not want to do all those manually, I would like provide you a workaround, hope this can help you.
To accomplish this, unload your project. Then at the very end of the project , just before the end-tag, place below scripts:
<Target Name="ExcludeFileFromPackage" BeforeTargets="PipelineCopyAllFilesToOneFolderForMsdeploy">
<Message Text="Delete the connectionstrings.config from Obj folder to exculde this file in the package directory" />
<Delete Files="$(ProjectDir)obj\Release\Package\PackageTmp\connectionstrings.config" />
</Target>
With this target, VS/MSBuild will delete the connectionstrings.config from the obj folder before publish the project as package.
Folks,
In a nutshell, I want to replicate this dialog:
It's a Visual Studio 2010 ASP.Net MVC project. If I execute this command, I get all the files I want, including the transformed web.configs in the "C:\ToDeploy" directory.
I want to replicate this on the command line so I can use it for a QA environment build.
I've seen various articles on how to do this on the command line for Remote Deploys, but I just want to do it for File System deploys.
I know I could replicate this functionality using nAnt tasks or rake scripts, but I want to do it using this mechanism so I'm not repeating myself.
I've investigated this some more, and I've found these links, but none of them solve it cleanly:
VS 2008 version, but no Web.Config transforms
Creates package, but doesn't deploy it..do I need to use MSDeploy on this package?
Deploys package after creating it above...does the UI really do this 2 step tango?
Thanks in advance!
Ok, finally figured this out.
The command line you need is:
msbuild path/to/your/webdirectory/YourWeb.csproj /p:Configuration=Debug;DeployOnBuild=True;PackageAsSingleFile=False
You can change where the project outputs to by adding a property of outdir=c:\wherever\ in the /p: section.
This will create the output at:
path/to/your/webdirectory/obj/Debug/Package/PackageTmp/
You can then copy those files from the above directory using whatever method you'd like.
I've got this all working as a ruby rake task using Albacore. I am trying to get it all done so I can actually put it as a contribution to the project. But if anyone wants the code before that, let me know.
Another wrinkle I found was that it was putting in Tokenized Parameters into the Web.config. If you don't need that feature, make sure you add:
/p:AutoParameterizationWebConfigConnectionStrings=false
I thought I'd post a another solution that I found, I've updated this solution to include a log file.
This is similar to Publish a Web Application from the Command Line, but just cleaned up and added log file. also check out original source http://www.digitallycreated.net/Blog/59/locally-publishing-a-vs2010-asp.net-web-application-using-msbuild
Create an MSBuild_publish_site.bat (name it whatever) in the root of your web application project
set msBuildDir=%WINDIR%\Microsoft.NET\Framework\v4.0.30319
set destPath=C:\Publish\MyWebBasedApp\
:: clear existing publish folder
RD /S /Q "%destPath%"
call %msBuildDir%\msbuild.exe MyWebBasedApp.csproj "/p:Configuration=Debug;PublishDestination=%destPath%;AutoParameterizationWebConfigConnectionStrings=False" /t:PublishToFileSystem /l:FileLogger,Microsoft.Build.Engine;logfile=Manual_MSBuild_Publish_LOG.log
set msBuildDir=
set destPath=
Update your Web Application project file MyWebBasedApp.csproj by adding the following xml under the <Import Project= tag
<Target Name="PublishToFileSystem" DependsOnTargets="PipelinePreDeployCopyAllFilesToOneFolder">
<Error Condition="'$(PublishDestination)'==''" Text="The PublishDestination property must be set to the intended publishing destination." />
<MakeDir Condition="!Exists($(PublishDestination))" Directories="$(PublishDestination)" />
<ItemGroup>
<PublishFiles Include="$(_PackageTempDir)\**\*.*" />
</ItemGroup>
<Copy SourceFiles="#(PublishFiles)" DestinationFiles="#(PublishFiles->'$(PublishDestination)\%(RecursiveDir)%(Filename)%(Extension)')" SkipUnchangedFiles="True" />
</Target>
this works better for me than other solutions.
Check out the following for more info:
1) http://www.digitallycreated.net/Blog/59/locally-publishing-a-vs2010-asp.net-web-application-using-msbuild
2) Publish a Web Application from the Command Line
3) Build Visual Studio project through the command line
My solution for CCNET with the Web.config transformation:
<tasks>
<msbuild>
<executable>C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe</executable>
<workingDirectory>E:\VersionesCC\Trunk_4\SBatz\Gertakariak_Orokorrak\GertakariakMS\Web</workingDirectory>
<projectFile>GertakariakMSWeb2.vbproj</projectFile>
<targets>Build</targets>
<timeout>600</timeout>
<logger>C:\Program Files\CruiseControl.NET\server\ThoughtWorks.CruiseControl.MSBuild.dll</logger>
<buildArgs>
/noconsolelogger /p:Configuration=Release /v:diag
/p:DeployOnBuild=true
/p:AutoParameterizationWebConfigConnectionStrings=false
/p:DeployTarget=Package
/p:_PackageTempDir=E:\Aplicaciones\GertakariakMS2\Web
</buildArgs>
</msbuild>
</tasks>
On VS2012 and above, you can refer to existing publish profiles on your project with msbuild 12.0, this would be equivalent to right-click and publish... selecting a publish profile ("MyProfile" on this example):
msbuild C:\myproject\myproject.csproj "/P:DeployOnBuild=True;PublishProfile=MyProfile"
I've got a solution for Visual Studio 2012: https://stackoverflow.com/a/15387814/2164198
However, it works with no Visual Studio installed at all! (see UPDATE).
I didn't checked yet whether one can get all needed stuff from Visual Studio Express 2012 for Web installation.
A complete msbuild file with inspiration from CubanX
<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Target Name="Publish">
<RemoveDir Directories="..\build\Release\Web\"
ContinueOnError="true" />
<MSBuild Projects="TheWebSite.csproj"
Targets="ResolveReferences;_CopyWebApplication"
Properties="Configuration=Release;WebProjectOutputDir=..\build\Release\Web;OutDir=..\build\Release\Web\bin\"
/>
</Target>
<Target
Name="Build"
DependsOnTargets="Publish;">
</Target>
</Project>
This places the published website in the Web..\build\Release folder
I am trying to configure TeamCity 5.0 to run "Publish" target on one of my projects.
When I load the solution in VS 2008 and click publish on the project the website is being build nicely - files on server appearing by themselves etc. Yet when I run the sln file via TeamCity Sln2008 runner the TeamCity returns:
[Project "Portal.csproj" (Publish target(s)):] Skipping unpublishable project.
Has anyone had the same problem?
Filip
You could create your own simple build file. For example:
<Project DefaultTargets="Build" ToolsVersion="3.5" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Import Project="$(MSBuildExtensionsPath)\MSBuildCommunityTasks\MSBuild.Community.Tasks.Targets"/>
<PropertyGroup>
<PackageFolder>C:\Builds\AppServer\Actual</PackageFolder>
</PropertyGroup>
<Target Name="Build" DependsOnTargets="BeforeBuild">
<MSBuild Projects="TeamWork-AppServer.sln"
Targets="Rebuild"
Properties="Configuration=Debug;OutDir=$(PackageFolder)\;"></MSBuild>
</Target>
</Project>
Or you can use VS 2008 Web Deployment Project. Here is a great turtorial.
If it is a WebProject you can use the Microsoft.WebApplication.targets. Unless you have installed the windows SDK on your build agent you will need to copy the targets file into your source control and reference it from your web project by adding:
<Import Project="{path to your tools}\Microsoft.WebApplication.targets" />
You can find the targets file here (depending on your os):
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\WebApplications
Now you just need to update your msbuild task to reference the right targets:
<MSBuild Projects="{path to your web project file}"
Targets="Build;ResolveReferences;_CopyWebApplication"
Properties="Configuration=Release;Architecture=Any;WebProjectOutputDir={your web root};OutDir={your web root}\bin\" />
Here is how I modified the .csproj file for an ASP.NET MVC project to deploy via TeamCity 5.1.2. In the .csproj file, replace the AfterBuild target with this XML (If there are already commands in your existing AfterBuild, you will have to merge them into these targets):
<PropertyGroup>
<DeployTarget>0</DeployTarget>
<PublishTarget>0</PublishTarget>
<PublishFolder>..\Deployment\YourWebsiteName</PublishFolder>
</PropertyGroup>
<Target Name="PublishProperties">
<CreateProperty Value="$(PublishFolder)">
<Output TaskParameter="Value" PropertyName="WebProjectOutputDir"/>
</CreateProperty>
<CreateProperty Value="$(PublishFolder)\bin\">
<Output TaskParameter="Value" PropertyName="OutDir"/>
</CreateProperty>
</Target>
<Target Name="WebPublish" DependsOnTargets="BeforeBuild;PublishProperties">
<RemoveDir Directories="$(PublishFolder)"
ContinueOnError="true" />
<CallTarget Targets="ResolveReferences;_CopyWebApplication" />
</Target>
<Target Name="Deploy" DependsOnTargets="WebPublish">
<CreateProperty Value="Path\To\Your\Server" Condition="$(DeployFolder) == ''">
<Output TaskParameter="Value" PropertyName="DeployFolder"/>
</CreateProperty>
<RemoveDir Directories="$(DeployFolder)" Condition="$(CleanDeploy) == 1" />
<ItemGroup>
<DeploymentFiles Include="$(PublishFolder)\**\*.*" />
</ItemGroup>
<Copy SourceFiles="#(DeploymentFiles)"
DestinationFolder="$(DeployFolder)\%(RecursiveDir)" />
</Target>
<Target Name="AfterBuild">
<CallTarget Targets="WebPublish" Condition="$(PublishTarget) == 1" />
<CallTarget Targets="Deploy" Condition="$(DeployTarget) == 1" />
</Target>
This script uses the $(PublishTarget) and $(DeployTarget) properties to trigger additional steps after your project is built. The PropertyGroup at the beginning sets the default values to 0, so the extra targets are not run. You can override the default in TeamCity by going to the Properties and Environment Variables page of your build configuration and adding System Properties names "PublishTarget" and "DeployTarget" and setting their value to 1.
The Publish target contains most of the magic. This makes a call to the Visual Studio _CopyWebApplication target to output the website to the PublishFolder. By default the publish folder is "..\Deployment\YourWebsiteName" relative to the project file, but this can also be overridden with a System Property. The Deploy target takes the files output by the Publish target and copies them to the DeployFolder. DeployFolder can be set with a System Property in TeamCity or you can replace the "Path\To\Your\Server" path in the Deploy target.
You could also skip the extra Deploy step by simply setting the PublishFolder to whatever your deployment destination is. This script depends on the "Microsoft.WebApplication.Build.Tasks.Dll" and "Microsoft.WebApplication.targets" files installed by Visual Studio, but you can simply copy the files from your developer workstation to the build server. The default location is "C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\WebApplications".
I have this same problem, here's what I've tried:
I have a solution file in Visual Studio 2010, committed to a Mercurial repository.
I have setup an FTP server for the root directory of the site to publish to, and publishing from within Visual Studio 2010 locally works nicely, it connects and uploads everything as expected, and the website works.
Now, I wanted to automate this on every push to the central Mercurial repository, and since I'm using TeamCity, I discovered that the field to specify the Target of the build, usually "Rebuild" can also take "Publish", so I specified "Rebuild;Publish", as per the documentation and help.
I have verified that after publishing in Visual Studio, and committing new files, a file named ProjectName.Publish.xml is accompanying my ProjectName.csproj file, and this file is pulled down into the server directory when TeamCity builds.
Yet, no publishing is done, and when I check the build log, it says:
[19:01:02]: [Project "Test.sln" (Rebuild;Publish target(s)):] Project "Test.UI.Web.csproj" (Publish target(s)):
[19:01:02]: [Project "Test.UI.Web.csproj" (Publish target(s)):] Skipping unpublishable project.
Exactly as the question here says.
Note that this is a development site, publishing just so that we can let more people test changes, so don't get into a discussion of whether this is actually a good idea or not.
Note: I do not care in which way the files are published, I just need the single TeamCity build-step to actually do it, so if anyone got a MSBuild-like solution that just sidesteps TeamCity, then I would be satisfied
Have you tried to execute Visual Studio directly, rather than relying on MSBuild to publish the project directly. MSBuild can't execute certain kinds of projects. I had a similar problem with getting MSI's built from within Team City.
I'm taking a guess at the exact commandline settings to this, since I don't know your exact setup.
<PropertyGroup>
<buildconfiguration>Release</buildconfiguration>
<DevEnv>C:\Program Files\Microsoft Visual Studio 10.0\Common7\IDE\devenv.com</DevEnv>
</PropertyGroup>
<Exec Command="%22$(DevEnv)%22 /build $(buildconfiguration) $(teamcity_build_checkoutDir)\Test.sln /project Test.UI.Web.csproj"/>
If you're using the Team City solution runner as your build runner, you'll have to switch to MSBuild.
If you want to stay with the Team City runner, you could always try adding a project to your solution that will be the last one built, (or do it on the project that currently gets built last), and do the spawning trick as a post-build command line on the project.
Can TeamCity publish a Web project using the sln2008 build runner
Can TeamCity publish a Web project using the sln2008 build runner?
What type of project are you trying to publish?
http://social.msdn.microsoft.com/forums/en-US/msbuild/thread/7ec0d942-6354-41c3-9c97-7e7d1f461c29
Taken from above link:
What I discovered is that "Shared-addins" are not publishable
and are distinct and different from document and application level
VSTO addins, which are deployable.
When I rebuilt my application as an application level
VSTO addin, the publish option was available.
http://www.automise.com/Default.aspx?tabid=53&aft=9813
Taken from above link:
Assuming you're using Visual Studio 2008, we're unable to execute the web site
publish feature from FinalBuilder as it's partially implemented by the VS IDE.
You'll need to use to the MSBuild action to compile the application and then
use one of the other actions (FTP, File Copy, etc) in FinalBuilder to perform
the deployment. Visual Studio 2010 has fixed this problem by performing the
entire publish using MSBuild, see this post for more info:
http://www.finalbuilder.com/forums....&afv=topic
Two threads that might help
http://devnet.jetbrains.net/thread/280420;jsessionid=5E8948AE810FFFF251996D85E7EB3FE3
Visual Studio. Publish project from command line
For anyone using Web Application Projects in VS2010, I managed to get TeamCity to package the deliverables and then Web Deploy the package after successfully building the solution.
With a little tweaking, this had the same effect as hitting the 'Publish' button in VS.
My solution has a handful of projects, 1 of which is an ASP.NET MVC Web Application project. I build the solution, package the web app project, and msdeploy the package in 3 steps. I haven't figured out a (better|shorter|simpler|more elegant) way to do this.
I don't have VS installed on my TeamCity server, so I needed to grab both C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Web and C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Web Applications and put them both in the same spot on the TeamCity server (the second depends on the first). If you're working w/x64 machines, I'd grab them from both Program Files (x86) and Program Files. You also need to have Web Deploy installed on your machine and (I believe) IIS Management Service (i.e., something listening on https://yourservername:8172/MsDeploy.axd)
There are 3 build steps:
Visusal Studio (sln), Target=Rebuild, Configuration=Debug
MSBuild WebProject.csproj, Targets=Package Commandline=/p:PackageLocation=%teamcity.build.checkoutDir%\Debug.zip /p:Configuration=Debug
Commandline, Executable=%teamcity.build.checkoutDir%\Debug.deploy.cmd, Parameters=
/Y "-setParam:'IIS Web Application Name'='Default Web Site/PreCreatedAppInIis'"
In that last step, 'IIS Web Application Name' is an actual parameter name, don't change it. It's value can either be something like 'Default Web Site' or whatever you named your website in IIS and/or it can be an IIS application path below it. If the application doesn't exist, you may run into errors about the app pool not being configured correctly to host the application. Rather than investigate it, I just created an application in the appropriate app pool. In my case, I'm targeting ASP.NET 4.0 x64 where the default app pool is ASP.NET 2.0 x64.