Related
How do I find and replace every occurrence of:
subdomainA.example.com
with
subdomainB.example.com
in every text file under the /home/www/ directory tree recursively?
find /home/www \( -type d -name .git -prune \) -o -type f -print0 | xargs -0 sed -i 's/subdomainA\.example\.com/subdomainB.example.com/g'
-print0 tells find to print each of the results separated by a null character, rather than a new line. In the unlikely event that your directory has files with newlines in the names, this still lets xargs work on the correct filenames.
\( -type d -name .git -prune \) is an expression which completely skips over all directories named .git. You could easily expand it, if you use SVN or have other folders you want to preserve -- just match against more names. It's roughly equivalent to -not -path .git, but more efficient, because rather than checking every file in the directory, it skips it entirely. The -o after it is required because of how -prune actually works.
For more information, see man find.
The simplest way for me is
grep -rl oldtext . | xargs sed -i 's/oldtext/newtext/g'
Note: Do not run this command on a folder including a git repo - changes to .git could corrupt your git index.
find /home/www/ -type f -exec \
sed -i 's/subdomainA\.example\.com/subdomainB.example.com/g' {} +
Compared to other answers here, this is simpler than most and uses sed instead of perl, which is what the original question asked for.
All the tricks are almost the same, but I like this one:
find <mydir> -type f -exec sed -i 's/<string1>/<string2>/g' {} +
find <mydir>: look up in the directory.
-type f:
File is of type: regular file
-exec command {} +:
This variant of the -exec action runs the specified command on the selected files, but the command line is built by appending
each selected file name at the end; the total number of invocations of the command will be much less than the number of
matched files. The command line is built in much the same way that xargs builds its command lines. Only one instance of
`{}' is allowed within the command. The command is executed in the starting directory.
For me the easiest solution to remember is https://stackoverflow.com/a/2113224/565525, i.e.:
sed -i '' -e 's/subdomainA/subdomainB/g' $(find /home/www/ -type f)
NOTE: -i '' solves OSX problem sed: 1: "...": invalid command code .
NOTE: If there are too many files to process you'll get Argument list too long. The workaround - use find -exec or xargs solution described above.
cd /home/www && find . -type f -print0 |
xargs -0 perl -i.bak -pe 's/subdomainA\.example\.com/subdomainB.example.com/g'
For anyone using silver searcher (ag)
ag SearchString -l0 | xargs -0 sed -i 's/SearchString/Replacement/g'
Since ag ignores git/hg/svn file/folders by default, this is safe to run inside a repository.
This one is compatible with git repositories, and a bit simpler:
Linux:
git grep -l 'original_text' | xargs sed -i 's/original_text/new_text/g'
Mac:
git grep -l 'original_text' | xargs sed -i '' -e 's/original_text/new_text/g'
(Thanks to http://blog.jasonmeridth.com/posts/use-git-grep-to-replace-strings-in-files-in-your-git-repository/)
To cut down on files to recursively sed through, you could grep for your string instance:
grep -rl <oldstring> /path/to/folder | xargs sed -i s^<oldstring>^<newstring>^g
If you run man grep you'll notice you can also define an --exlude-dir="*.git" flag if you want to omit searching through .git directories, avoiding git index issues as others have politely pointed out.
Leading you to:
grep -rl --exclude-dir="*.git" <oldstring> /path/to/folder | xargs sed -i s^<oldstring>^<newstring>^g
A straight forward method if you need to exclude directories (--exclude-dir=..folder) and also might have file names with spaces (solved by using 0Byte for both grep -Z and xargs -0)
grep -rlZ oldtext . --exclude-dir=.folder | xargs -0 sed -i 's/oldtext/newtext/g'
An one nice oneliner as an extra. Using git grep.
git grep -lz 'subdomainA.example.com' | xargs -0 perl -i'' -pE "s/subdomainA.example.com/subdomainB.example.com/g"
Simplest way to replace (all files, directory, recursive)
find . -type f -not -path '*/\.*' -exec sed -i 's/foo/bar/g' {} +
Note: Sometimes you might need to ignore some hidden files i.e. .git, you can use above command.
If you want to include hidden files use,
find . -type f -exec sed -i 's/foo/bar/g' {} +
In both case the string foo will be replaced with new string bar
find /home/www/ -type f -exec perl -i.bak -pe 's/subdomainA\.example\.com/subdomainB.example.com/g' {} +
find /home/www/ -type f will list all files in /home/www/ (and its subdirectories).
The "-exec" flag tells find to run the following command on each file found.
perl -i.bak -pe 's/subdomainA\.example\.com/subdomainB.example.com/g' {} +
is the command run on the files (many at a time). The {} gets replaced by file names.
The + at the end of the command tells find to build one command for many filenames.
Per the find man page:
"The command line is built in much the same way that
xargs builds its command lines."
Thus it's possible to achieve your goal (and handle filenames containing spaces) without using xargs -0, or -print0.
I just needed this and was not happy with the speed of the available examples. So I came up with my own:
cd /var/www && ack-grep -l --print0 subdomainA.example.com | xargs -0 perl -i.bak -pe 's/subdomainA\.example\.com/subdomainB.example.com/g'
Ack-grep is very efficient on finding relevant files. This command replaced ~145 000 files with a breeze whereas others took so long I couldn't wait until they finish.
or use the blazing fast GNU Parallel:
grep -rl oldtext . | parallel sed -i 's/oldtext/newtext/g' {}
grep -lr 'subdomainA.example.com' | while read file; do sed -i "s/subdomainA.example.com/subdomainB.example.com/g" "$file"; done
I guess most people don't know that they can pipe something into a "while read file" and it avoids those nasty -print0 args, while presevering spaces in filenames.
Further adding an echo before the sed allows you to see what files will change before actually doing it.
Try this:
sed -i 's/subdomainA/subdomainB/g' `grep -ril 'subdomainA' *`
According to this blog post:
find . -type f | xargs perl -pi -e 's/oldtext/newtext/g;'
#!/usr/local/bin/bash -x
find * /home/www -type f | while read files
do
sedtest=$(sed -n '/^/,/$/p' "${files}" | sed -n '/subdomainA/p')
if [ "${sedtest}" ]
then
sed s'/subdomainA/subdomainB/'g "${files}" > "${files}".tmp
mv "${files}".tmp "${files}"
fi
done
If you do not mind using vim together with grep or find tools, you could follow up the answer given by user Gert in this link --> How to do a text replacement in a big folder hierarchy?.
Here's the deal:
recursively grep for the string that you want to replace in a certain path, and take only the complete path of the matching file. (that would be the $(grep 'string' 'pathname' -Rl).
(optional) if you want to make a pre-backup of those files on centralized directory maybe you can use this also: cp -iv $(grep 'string' 'pathname' -Rl) 'centralized-directory-pathname'
after that you can edit/replace at will in vim following a scheme similar to the one provided on the link given:
:bufdo %s#string#replacement#gc | update
You can use awk to solve this as below,
for file in `find /home/www -type f`
do
awk '{gsub(/subdomainA.example.com/,"subdomainB.example.com"); print $0;}' $file > ./tempFile && mv ./tempFile $file;
done
hope this will help you !!!
For replace all occurrences in a git repository you can use:
git ls-files -z | xargs -0 sed -i 's/subdomainA\.example\.com/subdomainB.example.com/g'
See List files in local git repo? for other options to list all files in a repository. The -z options tells git to separate the file names with a zero byte, which assures that xargs (with the option -0) can separate filenames, even if they contain spaces or whatnot.
A bit old school but this worked on OS X.
There are few trickeries:
• Will only edit files with extension .sls under the current directory
• . must be escaped to ensure sed does not evaluate them as "any character"
• , is used as the sed delimiter instead of the usual /
Also note this is to edit a Jinja template to pass a variable in the path of an import (but this is off topic).
First, verify your sed command does what you want (this will only print the changes to stdout, it will not change the files):
for file in $(find . -name *.sls -type f); do echo -e "\n$file: "; sed 's,foo\.bar,foo/bar/\"+baz+\"/,g' $file; done
Edit the sed command as needed, once you are ready to make changes:
for file in $(find . -name *.sls -type f); do echo -e "\n$file: "; sed -i '' 's,foo\.bar,foo/bar/\"+baz+\"/,g' $file; done
Note the -i '' in the sed command, I did not want to create a backup of the original files (as explained in In-place edits with sed on OS X or in Robert Lujo's comment in this page).
Happy seding folks!
just to avoid to change also
NearlysubdomainA.example.com
subdomainA.example.comp.other
but still
subdomainA.example.com.IsIt.good
(maybe not good in the idea behind domain root)
find /home/www/ -type f -exec sed -i 's/\bsubdomainA\.example\.com\b/\1subdomainB.example.com\2/g' {} \;
Here's a version that should be more general than most; it doesn't require find (using du instead), for instance. It does require xargs, which are only found in some versions of Plan 9 (like 9front).
du -a | awk -F' ' '{ print $2 }' | xargs sed -i -e 's/subdomainA\.example\.com/subdomainB.example.com/g'
If you want to add filters like file extensions use grep:
du -a | grep "\.scala$" | awk -F' ' '{ print $2 }' | xargs sed -i -e 's/subdomainA\.example\.com/subdomainB.example.com/g'
For Qshell (qsh) on IBMi, not bash as tagged by OP.
Limitations of qsh commands:
find does not have the -print0 option
xargs does not have -0 option
sed does not have -i option
Thus the solution in qsh:
PATH='your/path/here'
SEARCH=\'subdomainA.example.com\'
REPLACE=\'subdomainB.example.com\'
for file in $( find ${PATH} -P -type f ); do
TEMP_FILE=${file}.${RANDOM}.temp_file
if [ ! -e ${TEMP_FILE} ]; then
touch -C 819 ${TEMP_FILE}
sed -e 's/'$SEARCH'/'$REPLACE'/g' \
< ${file} > ${TEMP_FILE}
mv ${TEMP_FILE} ${file}
fi
done
Caveats:
Solution excludes error handling
Not Bash as tagged by OP
If you wanted to use this without completely destroying your SVN repository, you can tell 'find' to ignore all hidden files by doing:
find . \( ! -regex '.*/\..*' \) -type f -print0 | xargs -0 sed -i 's/subdomainA.example.com/subdomainB.example.com/g'
Using combination of grep and sed
for pp in $(grep -Rl looking_for_string)
do
sed -i 's/looking_for_string/something_other/g' "${pp}"
done
perl -p -i -e 's/oldthing/new_thingy/g' `grep -ril oldthing *`
to change multiple files (and saving a backup as *.bak):
perl -p -i -e "s/\|/x/g" *
will take all files in directory and replace | with x
called a “Perl pie” (easy as a pie)
I want to find all files within the current directory that contain a given string, then print just the 4th line of each file.
grep --null -l "$yourstring" * | # List all the files containing your string
xargs -0 sed -n '4p;q' # Print the fourth line of said files.
Different editions of grep have slightly different incantations of --null, but it's usually there in some form. Read your manpage for details.
Update: I believe one of the null file list incantations of grep is a reasonable solution that will cover the vast majority of real-world use cases, but to be entirely portable, if your version of grep does not support any null output it is not perfectly safe to use it with xargs, so you must resort to find.
find . -maxdepth 1 -type f -exec grep -q "$yourstring" {} \; -exec sed -n '4p;q' {} +
Because find arguments can almost all be used as predicates, the -exec grep -q… part filters the files that are eventually fed to sed down to only those that contain the required string.
From other user:
grep -Frl string . | xargs -n 1 sed -n 4p
Give a try to the below GNU find command,
find . -maxdepth 1 -type f -exec grep -l 'yourstring' {} \; | xargs -I {} awk 'NR==4{print; exit}' {}
It finds all the files in the current directory which contains specific string, and prints the line number 4 present in each file.
This for loop should work:
while read -d '' -r file; do
echo -n "$file: "
sed '4q;d' "$file"
done < <(grep --null -l "some-text" *.txt)
In the current directory, I'd like to print the filename and contents in it.
I can print filenames or contents separately by
find . | grep "file_for_print" | xargs echo
find . | grep "file_for_print" | xargs cat
but what I want is printing them together like this:
file1
line1 inside file1
line2 inside file1
file2
line1 inside file2
line2 inside file2
I read xargs with multiple commands as argument
and tried
find . | grep "file_for_print" | xargs -I % sh -c 'echo; cat;'
but doesn't work.
I'm not familiar with xargs, so don't know what exactly "-I % sh -c" means.
could anyone help me? thank you!
find . | grep "file_for_print" | xargs -I % sh -c 'echo %; cat %;' (OP was missing %s)
To start with, there is virtually no difference between:
find . | grep "file_for_print" | xargs echo
and
find . -name "file_for_print*"
except that the second one will not match filenames like this_is_not_the_file_for_print, and it will print the filenames one per line. It will also be a lot faster, because it doesn't need to generate and print the entire recursive directory structure just in order for grep to toss most of it away.
find . -name "file_for_print*"
is actually exactly the same as
find . -name "file_for_print*" -print
where the -print action prints each matched filename followed by a newline. If you don't provide find with any actions, it assumes you wanted -print. But it has more tricks up its sleeve than that. For example:
find . -name "file_for_print*" -exec cat {} \;
The -exec action causes find to execute the following command, up to the \;, replacing {} with each matching file name.
find does not limit itself to a single action. You can tell it to do however many you want. So:
find . -name "file_for_print*" -print -exec cat {} \;
will probably do pretty well what you want.
For lots more information on this very useful utility, type:
man find
or
info find
and read all about It.
Since it's not been said yet: -I % tells xargs to replace '%' with the arguments in the command you give it. The sh -c '...' just means run the commands '...' in a new shell.
So
xargs -I % sh -c 'echo %; cat %;'
will run echo [filename] followed by cat [filename] for every filename given to xargs. The echo and cat commands will be executed inside a different shell process but this usually doesn't matter. Your version didn't work because it was missing the % signs inside the command passed to xargs.
For what it's worth I would use this command to achieve the same thing:
find -name "*file_for_print*" | parallel 'echo {}; cat {};'
because it's simpler (parallel automatically uses {} as the substitution character and can take multiple commands by default).
In this specific case, each command is executed for each individual file anyway, so there's no advantage in using xargs. You may just append -exec twice to your 'find':
find . -name "*file_for_print*" -exec echo {} \; -exec cat {} \;
In this case-print could be used instead of the first echo as pointed out by rici, but this example shows the ability to execute two arbitrary commands with a single find
What about writing your own bash function?
#!/bin/bash
myFunction() {
while read -r file; do
echo "$file"
cat "$file"
done
}
find . -name "file_for_print*" | myFunction
This is the command I've been using for finding matches (queryString) in php files, in the current directory, with grep, case insensitive, and showing matching results in line:
find . -iname "*php" -exec grep -iH queryString {} \;
Is there a way to also pipe just the file name of the matches to another script?
I could probably run the -exec command twice, but that seems inefficient.
What I'd love to do on Mac OS X is then actually to "reveal" that file in the finder. I think I can handle that part. If I had to give up the inline matches and just let grep show the files names, and then pipe that to a third script, that would be fine, too - I would settle.
But I'm actually not even sure how to pipe the output (the matched file names) to somewhere else...
Help! :)
Clarification
I'd like to reveal each of the files in a finder window - so I'm probably not going to using the -q flag and stop at the first one.
I'm going to run this in the console, ideally I'd like to see the inline matches printed out there, as well as being able to pipe them to another script, like oascript (applescript, to reveal them in the finder). That's why I have been using -H - because I like to see both the file name and the match.
If I had to settle for just using -l so that the file name could more easily be piped to another script, that would be OK, too. But I think after looking at the reply below from #Charlie Martin, that xargs could be helpful here in doing both at the same time with a single find, and single grep command.
I did say bash but I don't really mind if this needs to be ran as /bin/sh instead - I don't know too much about the differences yet, but I do know there are some important ones.
Thank you all for the responses, I'm going to try some of them at the command line and see if I can get any of them to work and then I think I can choose the best answer. Leave a comment if you want me to clarify anything more.
Thanks again!
You bet. The usual thing is something like
$ find /path -name pattern -print | xargs command
So you might for example do
$ find . -name '*.[ch]' -print | xargs grep -H 'main'
(Quiz: why -H?)
You can carry on with this farther; for example. you might use
$ find . -name '*.[ch]' -print | xargs grep -H 'main' | cut -d ':' -f 1
to get the vector of file names for files that contain 'main', or
$ find . -name '*.[ch]' -print | xargs grep -H 'main' | cut -d ':' -f 1 |
xargs growlnotify -
to have each name become a Growl notification.
You could also do
$ grep pattern `find /path -name pattern`
or
$ grep pattern $(find /path -name pattern)
(in bash(1) at least these are equivalent) but you can run into limits on the length of a command line that way.
Update
To answer your questions:
(1) You can do anything in bash you can do in sh. The one thing I've mentioned that would be any different is the use of $(command) in place of using backticks around command, and that works in the version of sh on Macs. The csh, zsh, ash, and fish are different.
(2) I think merely doing $ open $(dirname arg) will opena finder window on the containing directory.
It sounds like you want to open all *.php files that contain querystring from within a Terminal.app session.
You could do it this way:
find . -name '*.php' -exec grep -li 'querystring' {} \; | xargs open
With my setup, this opens MacVim with each file on a separate tab. YMMV.
Replace -H with -l and you will get a list of those filenames that matched the pattern.
if you have bash4, simply do
grep pattern /path/**/*.php
the ** operator is like
grep pattern `find -name \*.php -print`
find /home/aaronmcdaid/Code/ -name '*.cpp' -exec grep -q -iH boost {} \; -exec echo {} \;
The first change I made is to add -q to your grep command. This is "Exit immediately with zero status if any match is found".
The good news is that this speeds up grep when a file has many matching lines. You don't care how many matches there are. But that means we need another exec on the end to actually print the filenames when grep has been successful
The grep result will be sent to stdout, so another -exec predicate is probably the best solution here.
Pipe to another script:
find . -iname "*.php" | myScript
File names will come into the stdin of myScript 1 line at a time.
You can also use xargs to form/execute commands to act on each file:
find . -iname "*.php" | xargs ls -l
act on files you find that match:
find . -iname "*.php" | xargs grep -l pattern | myScript
act that don't match pattern
find . -iname "*.php" | xargs grep -L pattern | myScript
In general using multiple -exec's and grep -q will be FAR faster than piping, since find has implied short circuits -a's separating each juxtaposed pair of expressions that's not separated with an explicit operator. The main problem here, is that you want something to happen if grep matches something AND for matches to be printed. If the files are reasonably sized then this should be faster (because grep -q exits after finding a single match)
find . -iname "*php" -exec grep -iq queryString {} \; -exec grep -iH queryString {} \; -exec otherprogram {} \;
If the files are particularly big, encapsulating it in a shell script may be faster then running multiple grep commands
find . -iname "*php" -exec bash -c \
'out=$(grep -iH queryString "$1"); [[ -n $out ]] && echo "$out" && exit 0 || exit 1' \
bash {} \; -print
Also note, if the matches are not particularly needed, then
find . -iname "*php" -exec grep -iq queryString {} \; -exec otherprogram {} \;
Will virtually always be faster than then a piped solution like
find . -iname "*php" -print0 | xargs -0 grep -iH | ...
Additionally, you should really have -type f in all cases, unless you want to catch *php directories
Regarding the question of which is faster, and you actually care about the minuscule time difference, which maybe you might if you are trying to see which will save your processor some time... perhaps testing using the command as a suffix to the "time" command, and see which one performs better.
How do I find and replace every occurrence of:
subdomainA.example.com
with
subdomainB.example.com
in every text file under the /home/www/ directory tree recursively?
find /home/www \( -type d -name .git -prune \) -o -type f -print0 | xargs -0 sed -i 's/subdomainA\.example\.com/subdomainB.example.com/g'
-print0 tells find to print each of the results separated by a null character, rather than a new line. In the unlikely event that your directory has files with newlines in the names, this still lets xargs work on the correct filenames.
\( -type d -name .git -prune \) is an expression which completely skips over all directories named .git. You could easily expand it, if you use SVN or have other folders you want to preserve -- just match against more names. It's roughly equivalent to -not -path .git, but more efficient, because rather than checking every file in the directory, it skips it entirely. The -o after it is required because of how -prune actually works.
For more information, see man find.
The simplest way for me is
grep -rl oldtext . | xargs sed -i 's/oldtext/newtext/g'
Note: Do not run this command on a folder including a git repo - changes to .git could corrupt your git index.
find /home/www/ -type f -exec \
sed -i 's/subdomainA\.example\.com/subdomainB.example.com/g' {} +
Compared to other answers here, this is simpler than most and uses sed instead of perl, which is what the original question asked for.
All the tricks are almost the same, but I like this one:
find <mydir> -type f -exec sed -i 's/<string1>/<string2>/g' {} +
find <mydir>: look up in the directory.
-type f:
File is of type: regular file
-exec command {} +:
This variant of the -exec action runs the specified command on the selected files, but the command line is built by appending
each selected file name at the end; the total number of invocations of the command will be much less than the number of
matched files. The command line is built in much the same way that xargs builds its command lines. Only one instance of
`{}' is allowed within the command. The command is executed in the starting directory.
For me the easiest solution to remember is https://stackoverflow.com/a/2113224/565525, i.e.:
sed -i '' -e 's/subdomainA/subdomainB/g' $(find /home/www/ -type f)
NOTE: -i '' solves OSX problem sed: 1: "...": invalid command code .
NOTE: If there are too many files to process you'll get Argument list too long. The workaround - use find -exec or xargs solution described above.
cd /home/www && find . -type f -print0 |
xargs -0 perl -i.bak -pe 's/subdomainA\.example\.com/subdomainB.example.com/g'
For anyone using silver searcher (ag)
ag SearchString -l0 | xargs -0 sed -i 's/SearchString/Replacement/g'
Since ag ignores git/hg/svn file/folders by default, this is safe to run inside a repository.
This one is compatible with git repositories, and a bit simpler:
Linux:
git grep -l 'original_text' | xargs sed -i 's/original_text/new_text/g'
Mac:
git grep -l 'original_text' | xargs sed -i '' -e 's/original_text/new_text/g'
(Thanks to http://blog.jasonmeridth.com/posts/use-git-grep-to-replace-strings-in-files-in-your-git-repository/)
To cut down on files to recursively sed through, you could grep for your string instance:
grep -rl <oldstring> /path/to/folder | xargs sed -i s^<oldstring>^<newstring>^g
If you run man grep you'll notice you can also define an --exlude-dir="*.git" flag if you want to omit searching through .git directories, avoiding git index issues as others have politely pointed out.
Leading you to:
grep -rl --exclude-dir="*.git" <oldstring> /path/to/folder | xargs sed -i s^<oldstring>^<newstring>^g
A straight forward method if you need to exclude directories (--exclude-dir=..folder) and also might have file names with spaces (solved by using 0Byte for both grep -Z and xargs -0)
grep -rlZ oldtext . --exclude-dir=.folder | xargs -0 sed -i 's/oldtext/newtext/g'
An one nice oneliner as an extra. Using git grep.
git grep -lz 'subdomainA.example.com' | xargs -0 perl -i'' -pE "s/subdomainA.example.com/subdomainB.example.com/g"
Simplest way to replace (all files, directory, recursive)
find . -type f -not -path '*/\.*' -exec sed -i 's/foo/bar/g' {} +
Note: Sometimes you might need to ignore some hidden files i.e. .git, you can use above command.
If you want to include hidden files use,
find . -type f -exec sed -i 's/foo/bar/g' {} +
In both case the string foo will be replaced with new string bar
find /home/www/ -type f -exec perl -i.bak -pe 's/subdomainA\.example\.com/subdomainB.example.com/g' {} +
find /home/www/ -type f will list all files in /home/www/ (and its subdirectories).
The "-exec" flag tells find to run the following command on each file found.
perl -i.bak -pe 's/subdomainA\.example\.com/subdomainB.example.com/g' {} +
is the command run on the files (many at a time). The {} gets replaced by file names.
The + at the end of the command tells find to build one command for many filenames.
Per the find man page:
"The command line is built in much the same way that
xargs builds its command lines."
Thus it's possible to achieve your goal (and handle filenames containing spaces) without using xargs -0, or -print0.
I just needed this and was not happy with the speed of the available examples. So I came up with my own:
cd /var/www && ack-grep -l --print0 subdomainA.example.com | xargs -0 perl -i.bak -pe 's/subdomainA\.example\.com/subdomainB.example.com/g'
Ack-grep is very efficient on finding relevant files. This command replaced ~145 000 files with a breeze whereas others took so long I couldn't wait until they finish.
or use the blazing fast GNU Parallel:
grep -rl oldtext . | parallel sed -i 's/oldtext/newtext/g' {}
grep -lr 'subdomainA.example.com' | while read file; do sed -i "s/subdomainA.example.com/subdomainB.example.com/g" "$file"; done
I guess most people don't know that they can pipe something into a "while read file" and it avoids those nasty -print0 args, while presevering spaces in filenames.
Further adding an echo before the sed allows you to see what files will change before actually doing it.
Try this:
sed -i 's/subdomainA/subdomainB/g' `grep -ril 'subdomainA' *`
According to this blog post:
find . -type f | xargs perl -pi -e 's/oldtext/newtext/g;'
#!/usr/local/bin/bash -x
find * /home/www -type f | while read files
do
sedtest=$(sed -n '/^/,/$/p' "${files}" | sed -n '/subdomainA/p')
if [ "${sedtest}" ]
then
sed s'/subdomainA/subdomainB/'g "${files}" > "${files}".tmp
mv "${files}".tmp "${files}"
fi
done
If you do not mind using vim together with grep or find tools, you could follow up the answer given by user Gert in this link --> How to do a text replacement in a big folder hierarchy?.
Here's the deal:
recursively grep for the string that you want to replace in a certain path, and take only the complete path of the matching file. (that would be the $(grep 'string' 'pathname' -Rl).
(optional) if you want to make a pre-backup of those files on centralized directory maybe you can use this also: cp -iv $(grep 'string' 'pathname' -Rl) 'centralized-directory-pathname'
after that you can edit/replace at will in vim following a scheme similar to the one provided on the link given:
:bufdo %s#string#replacement#gc | update
You can use awk to solve this as below,
for file in `find /home/www -type f`
do
awk '{gsub(/subdomainA.example.com/,"subdomainB.example.com"); print $0;}' $file > ./tempFile && mv ./tempFile $file;
done
hope this will help you !!!
For replace all occurrences in a git repository you can use:
git ls-files -z | xargs -0 sed -i 's/subdomainA\.example\.com/subdomainB.example.com/g'
See List files in local git repo? for other options to list all files in a repository. The -z options tells git to separate the file names with a zero byte, which assures that xargs (with the option -0) can separate filenames, even if they contain spaces or whatnot.
A bit old school but this worked on OS X.
There are few trickeries:
• Will only edit files with extension .sls under the current directory
• . must be escaped to ensure sed does not evaluate them as "any character"
• , is used as the sed delimiter instead of the usual /
Also note this is to edit a Jinja template to pass a variable in the path of an import (but this is off topic).
First, verify your sed command does what you want (this will only print the changes to stdout, it will not change the files):
for file in $(find . -name *.sls -type f); do echo -e "\n$file: "; sed 's,foo\.bar,foo/bar/\"+baz+\"/,g' $file; done
Edit the sed command as needed, once you are ready to make changes:
for file in $(find . -name *.sls -type f); do echo -e "\n$file: "; sed -i '' 's,foo\.bar,foo/bar/\"+baz+\"/,g' $file; done
Note the -i '' in the sed command, I did not want to create a backup of the original files (as explained in In-place edits with sed on OS X or in Robert Lujo's comment in this page).
Happy seding folks!
just to avoid to change also
NearlysubdomainA.example.com
subdomainA.example.comp.other
but still
subdomainA.example.com.IsIt.good
(maybe not good in the idea behind domain root)
find /home/www/ -type f -exec sed -i 's/\bsubdomainA\.example\.com\b/\1subdomainB.example.com\2/g' {} \;
Here's a version that should be more general than most; it doesn't require find (using du instead), for instance. It does require xargs, which are only found in some versions of Plan 9 (like 9front).
du -a | awk -F' ' '{ print $2 }' | xargs sed -i -e 's/subdomainA\.example\.com/subdomainB.example.com/g'
If you want to add filters like file extensions use grep:
du -a | grep "\.scala$" | awk -F' ' '{ print $2 }' | xargs sed -i -e 's/subdomainA\.example\.com/subdomainB.example.com/g'
For Qshell (qsh) on IBMi, not bash as tagged by OP.
Limitations of qsh commands:
find does not have the -print0 option
xargs does not have -0 option
sed does not have -i option
Thus the solution in qsh:
PATH='your/path/here'
SEARCH=\'subdomainA.example.com\'
REPLACE=\'subdomainB.example.com\'
for file in $( find ${PATH} -P -type f ); do
TEMP_FILE=${file}.${RANDOM}.temp_file
if [ ! -e ${TEMP_FILE} ]; then
touch -C 819 ${TEMP_FILE}
sed -e 's/'$SEARCH'/'$REPLACE'/g' \
< ${file} > ${TEMP_FILE}
mv ${TEMP_FILE} ${file}
fi
done
Caveats:
Solution excludes error handling
Not Bash as tagged by OP
If you wanted to use this without completely destroying your SVN repository, you can tell 'find' to ignore all hidden files by doing:
find . \( ! -regex '.*/\..*' \) -type f -print0 | xargs -0 sed -i 's/subdomainA.example.com/subdomainB.example.com/g'
Using combination of grep and sed
for pp in $(grep -Rl looking_for_string)
do
sed -i 's/looking_for_string/something_other/g' "${pp}"
done
perl -p -i -e 's/oldthing/new_thingy/g' `grep -ril oldthing *`
to change multiple files (and saving a backup as *.bak):
perl -p -i -e "s/\|/x/g" *
will take all files in directory and replace | with x
called a “Perl pie” (easy as a pie)