I have 2 c++ projects in a solution.
ExecB (an executable) depends on ProjA (a dll).
So in ExecB's properties I add ProjA as a reference, and select Copy Local = true.
The problem is, ProjA's dll isn't being copied to ExecB's output folder folder. So the executable obviously doesn't run.
Any suggestions ?
For C++ projects, the Visual Studio template/wizard sets the Output Directory to a subfolder of the solution: $(SolutionDir)$(Configuration)\. This is so the DLL Search Path works well for the developer. It even works if you have added projects to the solution from outside the solution folder hierarchy; The build will put all binaries into the output folder for that solution.
If this isn't working, check the Output Directory property on all platform/configuration combinations of all your projects. Also make sure that the Build Configuration Manager shows that your selected solution build is building all the projects appropriate for the solution platform/configuration.
The Copy Local in Project References that you are trying applies only to referenced .NET assemblies. The docs are ambiguous and too terse on that. (Most often undistinguished use of "assembly" means .NET assembly rather than WinSxS assembly.)
I have been using the Codesmith framework NetTiers to generate a DAL etc., into a folder called, say, 'NetTiers', outside my main project's folder, and referencing the DLLs within that folder from my main project.
I've started using the Plinqo framework, and want to use the generated files from that framework within the same project as the one I'm using with NetTiers. (The reason I'm using both frameworks is that I want to get/learn the newer LINQ goodness from Plinqo, yet also have the familiar NetTiers code DAL, BLL syntax available, for compatibility.)
My question is: what's the best Visual Studio solution and file structure to use when using Codesmith templates like these? Should the frameworks' generated code be contained outside the main project and added as projects to the overall solution? Or should each template's generated code have its own solution? Should the generated files be within the main project's file structure?
I've tried combinations of each of these, and they each have their pros and cons. I'd like to know if there's a tried and tested pattern.
When it comes to .netTiers, I always compile the generated solution and add the assemblies as references to my project. This makes it much easier to upgrade/diff and regen.
However, there are going to be some cases where you would want to add your custom logic so keep this in mind.
Thanks
-Blake Niemyjski
I tend to just keep the .csp and the generated folder outside of my main app's folder. When adding a reference Visual Studio copies in the .DLLs from the built generated code. All of the generated projects sit under a main folder such as D:\CodeSmith Projects\
If you want to version control the .csp file it might be beneficial to move it in with the rest of your version controlled app files to tie it all together.
We put the generated projects inside our solution. In fact on my current project I generated the nettiers files to the location that I wanted the files to be, and Started adding my own project files to that...But we have always kept the files in the solution, that way if i need to add something to the code in the concrete classes I can do it without having to open a whole new project.
We have tried both scenarios. We settled for including the assemblies in a dependencies folder, which was shared by multiple projects.
We had problems with TFS when the projects were included in the solution. the downside, is that you can't so easily step into the .NetTiers generated code when debugging, though after a while you get used to this, and accept that whatever is in .NetTiers stays within .NetTiers!
I have four projects in my Visual Studio solution (everyone targeting .NET 3.5) - for my problem only these two are important:
MyBaseProject <- this class library references a third-party DLL file (elmah.dll)
MyWebProject1 <- this web application project has a reference to MyBaseProject
I added the elmah.dll reference to MyBaseProject in Visual studio 2008 by clicking "Add reference..." → "Browse" tab → selecting the "elmah.dll".
The Properties of the Elmah Reference are as follows:
Aliases - global
Copy local - true
Culture -
Description - Error Logging Modules and Handlers (ELMAH) for ASP.NET
File Type - Assembly
Path - D:\webs\otherfolder\_myPath\__tools\elmah\Elmah.dll
Resolved - True
Runtime version - v2.0.50727
Specified version - false
Strong Name - false
Version - 1.0.11211.0
In MyWebProject1 I added the reference to Project MyBaseProject by:
"Add reference..." → "Projects" tab → selecting the "MyBaseProject". The Properties of this reference are the same except the following members:
Description -
Path - D:\webs\CMS\MyBaseProject\bin\Debug\MyBaseProject.dll
Version - 1.0.0.0
If I run the build in Visual Studio the elmah.dll file is copied to my MyWebProject1's bin directory, along with MyBaseProject.dll!
However if I clean and run MSBuild for the solution (via D:\webs\CMS> C:\WINDOWS\Microsoft.NET\Framework\v3.5\MSBuild.exe /t:ReBuild /p:Configuration=Debug MyProject.sln)
the elmah.dll is missing in MyWebProject1's bin directory - although the build itself contains no warning or errors!
I already made sure that the .csproj of MyBaseProject contains the private element with the value "true" (that should be an alias for "copy local" in Visual Studio):
<Reference Include="Elmah, Version=1.0.11211.0, Culture=neutral, processorArchitecture=MSIL">
<SpecificVersion>False</SpecificVersion>
<HintPath>..\mypath\__tools\elmah\Elmah.dll</HintPath>
**<Private>true</Private>**
</Reference>
(The private tag didn't appear in the .csproj's xml by default, although Visual Studio said "copy local" true. I switched "copy local" to false - saved - and set it back to true again - save!)
What is wrong with MSBuild? How do I get the (elmah.dll) reference copied to MyWebProject1's bin?
I do NOT want to add a postbuild copy action to every project's postbuild command! (Imagine I would have many projects depend on MyBaseProject!)
I just deal with it like this. Go to the properties of your reference and do this:
Set "Copy local = false"
Save
Set "Copy local = true"
Save
and that's it.
Visual Studio 2010 doesn't initially put:
<private>True</private> in the reference tag and setting "copy local" to false causes it to create the tag. Afterwards it will set it to true and false accordingly.
I'm not sure why it is different when building between Visual Studio and MsBuild, but here is what I have found when I've encountered this problem in MsBuild and Visual Studio.
Explanation
For a sample scenario let's say we have project X, assembly A, and assembly B. Assembly A references assembly B, so project X includes a reference to both A and B. Also, project X includes code that references assembly A (e.g. A.SomeFunction()). Now, you create a new project Y which references project X.
So the dependency chain looks like this: Y => X => A => B
Visual Studio / MSBuild tries to be smart and only bring references over into project Y that it detects as being required by project X; it does this to avoid reference pollution in project Y. The problem is, since project X doesn't actually contain any code that explicitly uses assembly B (e.g. B.SomeFunction()), VS/MSBuild doesn't detect that B is required by X, and thus doesn't copy it over into project Y's bin directory; it only copies the X and A assemblies.
Solution
You have two options to solve this problem, both of which will result in assembly B being copied to project Y's bin directory:
Add a reference to assembly B in project Y.
Add dummy code to a file in project X that uses assembly B.
Personally I prefer option 2 for a couple reasons.
If you add another project in the future that references project X, you won't have to remember to also include a reference to assembly B (like you would have to do with option 1).
You can have explicit comments saying why the dummy code needs to be there and not to remove it. So if somebody does delete the code by accident (say with a refactor tool that looks for unused code), you can easily see from source control that the code is required and to restore it. If you use option 1 and somebody uses a refactor tool to clean up unused references, you don't have any comments; you will just see that a reference was removed from the .csproj file.
Here is a sample of the "dummy code" that I typically add when I encounter this situation.
// DO NOT DELETE THIS CODE UNLESS WE NO LONGER REQUIRE ASSEMBLY A!!!
private void DummyFunctionToMakeSureReferencesGetCopiedProperly_DO_NOT_DELETE_THIS_CODE()
{
// Assembly A is used by this file, and that assembly depends on assembly B,
// but this project does not have any code that explicitly references assembly B. Therefore, when another project references
// this project, this project's assembly and the assembly A get copied to the project's bin directory, but not
// assembly B. So in order to get the required assembly B copied over, we add some dummy code here (that never
// gets called) that references assembly B; this will flag VS/MSBuild to copy the required assembly B over as well.
var dummyType = typeof(B.SomeClass);
Console.WriteLine(dummyType.FullName);
}
If you are not using the assembly directly in code then Visual Studio whilst trying to be helpful detects that it is not used and doesn't include it in the output. I'm not sure why you are seeing different behaviour between Visual Studio and MSBuild. You could try setting the build output to diagnostic for both and compare the results see where it diverges.
As for your elmah.dll reference if you are not referencing it directly in code you could add it as an item to your project and set the Build Action to Content and the Copy to Output Directory to Always.
Take a look at:
This MSBuild forum thread I started
You will find my temporary solution / workaround there!
(MyBaseProject needs some code that is referencing some classes (whatever) from the elmah.dll for elmah.dll being copied to MyWebProject1's bin!)
I had the same problem.
Check if the framework version of your project is the same of the framework version of the dll that you put on reference.
In my case, my client was compiled using "Framework 4 Client" and the DLL was in "Framework 4".
The issue I was facing was I have a project that is dependent on a library project. In order to build I was following these steps:
msbuild.exe myproject.vbproj /T:Rebuild
msbuild.exe myproject.vbproj /T:Package
That of course meant I was missing my library's dll files in bin and most importantly in the package zip file. I found this works perfectly:
msbuild.exe myproject.vbproj /T:Rebuild;Package
I have no idea why this work or why it didn't in the first place. But hope that helps.
I just had the exact same problem and it turned out to be caused by the fact that 2 projects in the same solution were referencing a different version of the 3rd party library.
Once I corrected all the references everything worked perfectly.
As Alex Burtsev mentioned in a comment anything that’s only used in a XAML resource dictionary, or in my case, anything that’s only used in XAML and not in code behind, isn't deemed to be 'in use' by MSBuild.
So simply new-ing up a dummy reference to a class/component in the assembly in some code behind was enough convince MSBuild that the assembly was actually in use.
Using deadlydog's scheme,
Y => X => A => B,
my problem was when I built Y, the assemblies (A and B, all 15 of them) from X were not showing up in Y's bin folder.
I got it resolved by removing the reference X from Y, save, build, then re-add X reference (a project reference), and save, build, and A and B started showing up in Y's bin folder.
Changing the target framework from .NET Framework 4 Client Profile to .NET Framework 4 fixed this problem for me.
So in your example: set the target framework on MyWebProject1 to .NET Framework 4
I had the same problem and the dll was a dynamically loaded reference.
To solve the problem I have added an "using" with the namespace of the dll.
Now the dll is copied in the output folder.
This requires adding a .targets file to your project and setting it to be included in the project's includes section.
See my answer here for the procedure.
Referencing assemblies that are not used during build is not the correct practice. You should augment your build file so it will copy the additional files. Either by using a post build event or by updating the property group.
Some examples can be found in other post
MSBuild to copy dynamically generated files as part of project dependency
VS2010 How to include files in project, to copy them to build output directory automatically during build or publish
Another scenario where this shows up is if you are using the older "Web Site" project type in Visual Studio. For that project type, it is unable to reference .dlls that are outside of it's own directory structure (current folder and down). So in the answer above, let's say your directory structure looks like this:
Where ProjectX and ProjectY are parent/child directories, and ProjectX references A.dll which in turn references B.dll, and B.dll is outside the directory structure, such as in a Nuget package on the root (Packages), then A.dll will be included, but B.dll will not.
I had a similar issue today, and this is most certainly not the answer to your question. But I'd like to inform everyone, and possibly provide a spark of insight.
I have a ASP.NET application. The build process is set to clean and then build.
I have two Jenkins CI scripts. One for production and one for staging. I deployed my application to staging and everything worked fine. Deployed to production and was missing a DLL file that was referenced. This DLL file was just in the root of the project. Not in any NuGet repository. The DLL was set to do not copy.
The CI script and the application was the same between the two deployments. Still after the clean and deploy in the staging environment the DLL file was replaced in the deploy location of the ASP.NET application (bin/). This was not the case for the production environment.
It turns out in a testing branch I had added a step to the build process to copy over this DLL file to the bin directory. Now the part that took a little while to figure out. The CI process was not cleaning itself. The DLL was left in the working directory and was being accidentally packaged with the ASP.NET .zip file. The production branch never had the DLL file copied in the same way and was never accidentally deploying this.
TLDR; Check and make sure you know what your build server is doing.
Make sure that both projects are in the same .net version also check copy local property but this should be true as default
Using Visual Studio 2015 adding the additional parameter
/deployonbuild=false
to the msbuild command line fixed the issue.
I just ran into a very similar issue. When compiling using Visual Studio 2010, the DLL file was included in the bin folder. But when compiling using MSBuild the third-party DLL file was not included.
Very frustrating. The way I solved it was to include the NuGet reference to the package in my web project even though I'm not using it directly there.
I dont think #deadlydog answer is valid with the current Nuget system. I recreated the scenario with Y => X => A => B in visual studio 2022 and all I had to do was run the command in terminal
msbuild -t:clean,rebuild,pack
Including all referenced DLL files from your projectreferences in the Website project is not always a good idea, especially when you're using dependency injection: your web project just want to add a reference to the interface DLL file/project, not any concrete implementation DLL file.
Because if you add a reference directly to an implementation DLL file/project, you can't prevent your developer from calling a "new" on concrete classes of the implementation DLL file/project instead of via the interface. It's also you've stated a "hardcode" in your website to use the implementation.
I've got a rather large solution in Visual Studio. Is there a way to update the Major / Minor version numbers for all the assemblies in the solution in one go?
You can share an AssemblyInfo.cs file between all projects in the solution. This shared file should contain the version numbers. To share it, you must use Add Existing File in VS and select Add as Link in the file dialog. Every project has its private and the shared AssemblyInfo.cs. The private one still contains the non-Version attributes.
I've got a TeamCity setup, where I'm generating the shared file in each TeamCity build using the actual build version and it works beautifully.
We have a single AssemblyInfoCommon.cs which has the version numbers, and is included in each project by reference. The other AssemblyInfo.cs files remain but only contain the assembly-specific information (title and description). So we only have one file to update for every C# project.
You can also have a public const string in one of your classes, that represents the build number, and use it in all your AssemblyInfo.cs for the different projects. Of course this would have to be in a project that are referenced by all the other projects, in order to work.
It is a good option, if you don't like the idea to reference the same AssemblyInfo.cs in all your projects.
Edit: Note! This also works when you use multiple languages (F# and C# in my case).
Search/Replace?
The version numbers are stored in text-files after all (AssemblyInfo.cs under the Properties folder for each project).
There is a very useful utility I used some time ago on a project which required highly managed versioning:
http://www.codeproject.com/KB/macros/versioningcontrolledbuild.aspx
Also you can create some "core" assembly and add into each your assembly reference to "core" assembly. "core" assembly will constaint constant. In this case in each Assembly info file will be set asembly version from "core" constant.
For example:
"core" assembly has file Ver.cs with constant:
public const string Value = "0.0.0.99";
in each solution assembly info will:
[assembly: AssemblyFileVersion(Ver.Value)]
I wanted to use T4 to generate properties for a partial class. I'm running into a configuration problem where my .TT file is in the same project as the class file I want to extend. So if I have to include the assembly in the .TT file it get's locked. I tried to do a command line in the pre-build but the problem there is that VS always wants to recompile the .TT file with the project.
The only solution I can think of is to rename the .tt files to say .t4 and then use a pre-build command with TextTransform -out to create the .cs file in the project directory.
Can anyone think of a cleaner way to do this?
Assuming that locking is caused by your template using Reflection to read metadata of the partial class you need to extend, you could solve the locking problem if you use CodeModel. This API is provided by Visual Studio and allows you to get the metadata directly from the source file, without the need to compile the partial class or load the compiled DLL. Here is an example of a T4 code generator that uses this approach: http://www.olegsych.com/2008/07/t4-template-for-generating-sql-view-from-csharp-enumeration