I have a piece of software written "out there" (e.g. no source code available) that allows me to use it in multicast mode. I'm trying to use this software on a network that, for technical reasons, can only use IGMP Version 2.
My OS is Windows 7 (64-bit, though I doubt that makes a difference). So far my searches have only given me Windows XP & Windows Server solutions, all of which involve editing the registry. In addition to the usual reasons (aka "registry paranoia"), I hesitate to edit the registry in this case because this particular network is not the only one that I will be using; I have not problems at all in all the other networks I try using multicast on.
Is there a straightforward way to force this software onto IGMP V2?
Thanks!
John Price
As far as I remember, adding IGMPVersion=3 to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters is the only way to solve your problem.
Anyway, there is another creepy solution - just write a little daemon, that will sniff for IGMPv3, parse data from it and send IGMPv2 packets =)
Related
I'm looking for a way to ensure that a USB device plugged into a Windows 7 machine will be mounted in a reliable, repeatable way.
I don't have that much Windows experience, but I wondered if there was a way to make the equivalent of a udev rule in Linux to match certain parameters to identify the device and then mount it on a specific COM port.
Any advice would be gratefully received.
Sarcastic answer:
I've looked for C:\Windows\etc\udev.d but there's no such directory
;)
Less sarcastic answer:
As far as I know, the only way to configure devices in windows is via the device management UI which can be started with mmc devmgmt.msc
This is obviously not even similar or even close to udev, there is no possibility to do this without the GUI.
I'm looking for a snmp server for windows, are there any free (or at least working trial version) ones, I can only find clients?
I know I could install the windows snmp service but here at work it is not really an option (I don't have the "win xp" CD needed and support is as complicated as slow, even worse, it's Friday).
Thanks!
The Net-SNMP software contains both clients and servers. Specifically, the project contains both an SNMP agent server than runs on windows, as well as a trap receiver application as well.
I've recently bought a laptop with a touch pad that does not completely work under Linux. So I thought I might listen what data is sent to the PS2 controller (IO port 60) under Windows, and update the Linux driver accordingly. Do you know what tools I might use?
Perisoft Bushound - Expensive but very useful.
For your specific purpose I'd use some serial port monitor/sniffer software.
You may write your own tool that does the same, but that's a large amount of work. You should create a so-called file system filter driver (http://msdn.microsoft.com/en-us/windows/hardware/gg462968).
I'm developing a project that has a number of hardware sensors connecting to the deployment machine through RS232 serial ports.
But ... I'm developing on a machine without an physical RS232 serial ports, but I would like to make fake serial ports that I can connect to and output data from with the aim of faking input from hardware sensors.
Does anyone know of a way to create a fake serial port and control it on Windows XP?
If you are developing for Windows, the com0com project might be, what you are looking for.
It provides pairs of virtual COM ports that are linked via a nullmodem connetion. You can then use your favorite terminal application or whatever you like to send data to one COM port and recieve from the other one.
EDIT:
As Thomas pointed out the project lacks of a signed driver, which is especially problematic on certain Windows version (e.g. Windows 7 x64).
There are a couple of unofficial com0com versions around that do contain a signed driver. One recent verion (3.0.0.0) can be downloaded e.g. from here.
I know this is an old post, but in case someone else happens upon this question, one good option is Virtual Serial Port Emulator (VSPE) from Eterlogic
It provides an API for creating kernel mode virtual comport devices, i.e. connectors, mappers, splitters etc.
However, some of the advertised capabilities were really not capabilities at all.
EDIT
A much better choice, Eltima. This product is fully baked. Good developer tech support. The product did all it claimed to do. Product options include both desktop applications, as well as software development kits with APIs.
Neither of these products are open source, or free. However, as other posts here have pointed out, there are other options. Here is a list of various serial utilities:
com0com (current)
com0com - With Signed Driver (old version)
Yet another place for com0com with Signed Driver (Pete's Blog)
Tactical Software
Termite
COM Port Serial Emulator
Kermit (obsolete, but still downloadable)
HWVSP3
HHD Software (free edition)
I use com0com - With Signed Driver, on windows 7 x64 to emulate COM3 AND COM4 as a pair.
Then i use COM Dataport Emulator to recieve from COM4.
Then i open COM3 with the app im developping (c#) and send data to COM3.
The data sent thru COM3 is received by COM4 and shown by 'COM Dataport Emulator' who can also send back a response (not automated).
So with this 2 great programs i managed to emulate Serial RS-232 comunication.
Hope it helps.
Both programs are free!!!!!
There's always the hardware route. Purchase two USB to serial converters, and connect them via a NULL modem.
Pro tips:
1) Windows may assign new COM ports to the adapters after every device sleep or reboot.
2) The market leaders in chips for USB to serial are Prolific and FTDI. Both companies are battling knockoffs, and may be blocked in future official Windows drivers. The Linux drivers however work fine with the clones.
Another alternative, even though the OP did not ask for it:
There exist usb-to-serial adapters.
Depending on the type of adapter, you may also need a nullmodem cable, too.
They are extremely easy to use under linux, work under windows, too, if you have got working drivers installed.
That way you can work directly with the sensors, and you do not have to try and emulate data.
That way you are maybe even save from building an anemic system.
(Due to your emulated data inputs not covering all cases, leading you to a brittle system.)
Its often better to work with the real stuff.
i used eltima make virtual serial port for my modbus application debug work. it is really very good application at development stage to check serial port program without connecting hardware.
What do you recommend for quickly creating images for testing a software product (that needs hardware access - full USB port access)? Does virtualization cover this? I need to be able to quickly re-image the system to test from scratch again, and need good options for Windows and Mac OS.
Virtualization may work for you as long as it is only USB access.
VirtualBox is available with USB support either for "private use or evaluation" or commercially and works on Win, Mac and Linux. USB support on Linux and Mac is somewhat sporadical though and does not work with all devices. VBox supports snapshots.
VMWare has one free product called VMWare Server for Win and Linux but I'm not sure how far USB support is included in their server products. For Mac there is VMWare Fusion but that's not available for free. Fusion should work with most USB devices. Workstation products for Windows are more expensive. I think there is a trial version for all of them. All do snapshots.
I don't know how far Parallels (Mac) supports USB devices or snapshots.
You don't need snapshot functionality if you can afford some short downtime between re-imaging. You can shut down the VM and then just copy the disk image (which is nothing else but one or multiple regular files) and start the VM again. Snapshots can be reverted to a lot faster (without rebooting).
If virtual machines will work for you, you can choose between Virtual PC, VMWare and VirtualBox.
Virtual PC supports Win host and Win/linux guests. Although there are some caveats with regards to the X resolution support.
VMWare supports Win, OS X and Linux host. It supports Win and Linux guests.
VirtualBox supports same hosts and guests as VMWare.
None of the three supports OS X as guest officially. The reason is that OS X is licensed only for Apple machines. However, there are some hacks that allow installing OS X under VMWare. It might be also possible to install it under VirtualBox or Virtual PC, although I have not seen specific instructions.
If virtualization is not good enough for you, you can use precreated installation images or a disk imaging program.
For precreated installation images for Windows, you can use the sysprep tool (search for sysprep or system preparation tool). I don't know if there are equivalent tools for OS X from Apple.
For disk imaging programs, I know quite a lot people swear by Symantec Ghost. I personally have not used it, so can't give you much info about it. There's also a list of disk imaging programs on Wikipedia, so you evaluate these as well.
Hope that helps.
If virtualization is right for you depends on how much access direct access you actually need.
But if virtualization works then vmware offers products for Windows and Mac that support a Snapshot feature.
Or there's also VirtualBox which works on Linux, Windows and Mac, also supports snapshots and is free.
I use VMWare Player for this sort of stuff. I've not tested it with the sort of access you discuss (since I mostly do apps rather than driver-level stuff) but the advantages are many, specifically being able to copy the VM when it's shut down for later restore to a specific point (sort of a poor man's snapshot) and being able to have lots of configurations without blowing the hardware budget.
It certainly provides USB virtualization and I would say it's the best bet for providing the full device access. I would suggest testing it since, if it provides the hardware support you need, it's a very good solution for the other reasons given. The only other (non-VM) suggestion I can think of which would match it would be hard disk image backups which can be restored at will.
I've used Virtual PC heavily for this kind of thing in Windows, without ever hitting any issues. It's free, which is always a bonus ;o)
Edit: Just re-read the question - not sure that it has USB support. Should tick all the other boxes though
CloneZilla is a great, free way to reimage machines.
Once I worked for some company where we needed to test our software for various combinations of versions of OS, SPs and some other libraries which our application was dependent on. For each separate identified combination we had a separate partition image created with the help of Norton Ghost (DOS version). All images were put to a server. Whenever a tester got the next version of the system core to test, they would just methodically restore from all applicable images, install the application, test it and report it.
This approach though a straightforward one would allow full access to the hardware and will provide you with 100% native installation.
Nowadays, I still use this approach for my private PC. I'm sure you can try the latest achievements like Hyper-V. We use it nowadays where I work. When we tried to install Team Foundation Server (the process is far from being easy) we also had to drop the process at some point and just restore a virtual machine from an image because we realized we made a few mistakes during installation. Conceptually the same approach that saves a great deal of time. I'm not really sure though how compatible a virtual PC is in the sense of hardware access.
You can try both approaches.
P.S. Today there are two Ghost products, Symantec Ghost (good old one) for corporate use and Norton Ghost for home use (bloatware in my opinion). If you decide to try this option, I would recommend the Symantec Ghost (part of Ghost Solution Suite).
If you can't just use a virtual machine and take snapshots of the fresh install then do a fresh install onto real hardware and use a disk imaging tool (Ghost comes to mind).
If cost is a factor then there's a few Linux live CDs that will do what you want. This comes to mind. Put a second disk in the machine and image from the second disk unless you have fast networks and network storage; it's way to slow to go to and from the network regularly. If you're using a Linux live CD then you can actually set the second disk to EXT3 so Windows won't detect it and assign a drive letter too.
If you have a dedicated workstation for testing then I would highly recommend Symantec Ghost. Simply get the workstation to the clean state, reboot to ghost and 'take a snapshot' of the HD or partition. You can then replace the HD or partition from the image say from CD or multicasted over a network connection from another PC.
I have used it for years now, even to the point of automating the build of 60 test workstations (at the same time).