I got Team Explorer Everywhere so we can use TFS on the Mac Mini we got to test Iphone apps. Since we're using XCode for phonegap, we need to use the commandline program and it is giving me a lot of grief.
What I've done so far (Listing out for anyone who stumbles on this so they can use it):
-Downloaded the trial (free)
-Set the path using PATH=$PATH\:/FOLDERLOCATION
-Accepted EULA and got trial product key... for command line program (tf eula/tf productkey -trial)
-Set up workspace:
tf workspace -new WORKSPACENAME -server:http://SERVERNAME:PORT/FILEPATH -comment:"WORKSPACENAME" && prompted for username -> domain -> password
-Trying to setup the folder path (Fixed):
tf workfold -map SERVERFOLDERPATH LOCALFOLDERPATH -collection:http://SERVERNAME:PORT/FILEPATH -workspace:WORKSPACENAME && prompted for username -> domain -> password
-Make sure I can check out/check in (On hold):...
The error I'm getting right now is "An argument error occurred: First free argument must be a server path." This is what I've been following ever since I got the path set, but I think the versions are different because mine doesn't seem to be set up the same. Any help at all would be appreciated, and I'll keep up with the post as I figure parts out because there doesn't seem to be much online that I can find on TFS on macs.
Update: As normal, I'm an idiot. Have to put the options at the end of the command and have to have the serverfolder path as the first thing after -map. Now I just need to figure out how to use the damn thing. I'll post any other questions I have and try to get all the correct commands up for the selfish reason of having them somewhere in case I forget them later.
Update 2: The mapping hasn't worked out as well as I'd hoped, it seems a combination of my unfamiliarity with Unix/Mac file systems and some settings being missing is keeping me from using 'tf get' to load all of the test data I was trying to get. I'm planning on trying again after I get the location of where my boss wants the data saved and after I can look into something that would save the workspace so it won't say that it can't find the map path every time...
It looks like you're setting up your workspace and some working folder mappings just fine, after the edit. If you're having problems doing a tf get after this, then there are some common problems that might be occurring. TFS workspaces can be a little bit opaque and having a better understanding of them can sometimes help you understand where the problem is:
Team Foundation Server requires a workspace to be configured before you can get files out of source control, edit them or check them back in. A workspace basically simply contains working folder mappings that map your local path(s) to server path(s).
Workspaces are stored on the server and are uniquely identified by your computer's hostname, your username and the workspace's name. A cache of this information for the local host is saved on the client. This implies:
If you remove a workspace on the server, your workstation will be unable to connect.
If you remove the cache, your local computer will not be able to identify the workspace based on working folder mappings until the cache is rebuilt (which happens every time you connect to the server.)
If you change your username or local workstation's name, you cannot access those workspaces.
(Note that very early versions of the Teamprise command line client had certain issues on Mac OS that made identifying the local workstation name difficult. This is fixed, however, in Team Explorer Everywhere.)
Because you can have multiple workspaces for a single server on a single workstation, you can't always simply provide server paths to tf commands, since server paths are ambiguous. ($/ exists in every workspace, for example.) So the command line client resolves paths based on the current working directory and/or the arguments provided. Meaning that you can run tf get foo.txt if you're in a working folder, or you can run tf get /tmp/foo.txt if /tmp is mapped.
One more point - the configuration data for Team Explorer Everywhere is shared between the TFS plug-in for Eclipse and the command line client. So if you're more comfortable using a GUI to set up your workspace(s), you can do that and then use the CLC as you see fit. You don't need to be a Java programmer to use Eclipse - simply download Eclipse and install the TFS plug-in for Eclipse into it, and select Window > Open Perspective > Team Foundation Server Exploring. After that, you'll have the full GUI Team Explorer experience and this perspective will be restored when you open Eclipse, so you won't even need to worry about the Java IDE bits if you don't want to.
Related
Im a trainie and learning C# at the moment and have basic knowledge about how TFS and workspaces work.
Im using VS2017 in a VM which has access to TFS.
Problem
when i go in to VS2017 Source code control i can see the shared user workspace name. And when i try to use dev cmd or normal command prompt and type the tf workspaces, it does not show any workspace available and gives me the error "There is no corresponding workspace found on this computer".
Is there anyway to see it in CMD?
Reason
the reason i need to test this function is that, We have a Deploy .bat/.cmd file which calls the TFS for new update, do a Realase version and then put it to a given fix directoy.
Im sorry if i cant provide more details about the problem. Company Policy.
I could try to answer any further questions.
Thanks for the replies.
Unless you provide a filter such as owner, computer or workspace name, Team Foundation only displays information about the workspaces that you have created.
Command to get workspaces on current VM:
tf workspaces /owner:* /computer:* /server:teamserver
Workspace Commands
Note: To use the workspace command you must have the Read permission set to Allow.
Word of caution: Pulling down a release version from a bat file is normally a bad approach and can cause problems. I would recommend taking the opposite approach. Instead of running a bat file to trigger a build/deploy
have TFS trigger the deployment and workspace update by some action or manual action in order for it to control your process. You can always use the bat file for deployment steps just have TFS setup and call it for you.
In my setup, I am getting some code from client TFS site which I am accessing through a special machine in my company. There is no chance of us getting our machine on the client domain.
I have created two local workspaces, Automation and Manual, with same TFS user id.
Automation ($/AllCode/AppProject, D:\WorkspaceAutomation)
Manual ($/AllCode, D:\Worspace)
This user id is also registered with windows credentials store. Automation is to be used with a script while Manual with VS 2013 as backup.
When I give command like below, code gets synced to Manual folder D:\Workspace rather than to D:\WorkspaceAutomation
TFS get $/AllCode/AppProject /version:WAutomation /recursive /noprompt /login:username,password
When I give command like below, code gets synced to Automation folder D:\WorkspaceAutomation correctly.
TFS get D:\WorkspaceAutomation /version:WAutomation /recursive /noprompt /login:username,password
Is there a way to make earlier command work and not provide local path as itemspec? Going with later means some changes to my script which I am looking to avoid.
The server itemspec argument is like $/SiteApp/Main/SolutionA, which specifies a path to a folder on your Team Foundation Server, so try $/AllCode/AppProject, not $\AllCode\AppProject.
I am in an interesting situation where I maintain the code for a program that is used and distributed primarily by our sister company. We are ready to distribute the program to all of the 3rd party users and since it is technically our sister companies program, we want to host it on their website. (in the interest of anonimity, I'll use 'program' everywhere instead of the actual application name, and 'www.SisterCompany.com' instead of their actual URL.)
So I get everything ready to go, setup the Publish setting to check for updates at program start, the minimum required version, and I set the Insallation Folder URL and Update Location to "http://www.SisterCompany.com/apps/program/", with the actual Publishing Folder Location as "C:\LocalProjects\Program\Publish\". Everything else is pretty standard.
After publish, I confirm that everything installs and works correctly when running directly from the publish location on my C: drive. So I put everything on our FTP server, and the guy at our sister company pulls it down and places everything in the '/apps/program/' directory on their webserver.
This is where it goes bad. When I try to install it from their site, I get the - File, Program.exe.config, has a different computed hash than specified in manifest. Error. I tested it a bit, and I even get that error trying to install from any network location on our network other than my local C: drive.
After doing the initial publish in visual studio, I have changed no files (which is the answer/reason I've found by doing some searching about this error).
What could be causing this? Is it because I set the Installation Folder URL to a location that it isn't initially published too?
Let me know if any additional info is needed.
Thanks.
After bashing my head against this all weekend, I have finally found the answer. After unsigning the project and removing the hash on the offending file (an xml file), I got the program to install, but it was giving me 'Windows Side by Side' Errors. I drilled down into the App Cache were the file was, and instead of a config .xml file, it was one of the HTML files from the website the clickonce installer was hosted on. Turns out that the web server didn't seem to like serving up an .XML (or .mdb it turns out) file.
This MSDN article ended up giving me the final solution:
I had to make sure that the 'Use ".deploy" file extension' was selected so that the web server wouldn't mangle files with extensions it didn't like.
I couldn't figure out why that one file's hash would be different. Turns out it wasn't even the same file at all.
It is possible that one of the FTP transfers is happening in text mode, rather than binary?
For me the problem was that .config transformations were done after generating manifest.
To anyone else who's still having trouble, five years later:
The first problem was configuring the MIME type, which on nginx (/etc/nginx/mime.types) should look like this:
application/x-ms-manifest application
See Click Once Server and Client Configuration.
The weirder problem to me was that I was using git to handle the push to the server, i.e.
git remote add live ssh://user#mybox/path/to/publish
git commit -am "committing...";git push live master
Works great for most things, but it was probably being registered as a "change," which prevented the app from installing locally. Once I started using scp instead:
scp -r * user#mybox/path/to/dir/
It worked without a hitch.
It is unfortunate that there is not a lot of helpful information out there about this.
Following on from my previous question ( Watin does not work on my TFS build machine ), I have made my TFS build an interactive process.
I do however, get the following error when I run the build:
The working folder d:\Build\Sources is already in use by the workspace 8_1_appsdev_build;myUserAccount$ on computer myComputerName.
After some research, it seems that I need to delete my workspaces. If tried to list my workspaces with the following command, but the results indicate that I do not have any workspaces. Not sure what I am missing. Any ideas?
View workspaces command:
tf workspaces /computer: myComputerName /owner:*
No workspace matching *;* on computer myComputerName found in Team
Foundation Server http://myComputerName:8080/tfs/production.
Thanks!
You can find and delete the workspace by opening Visual Studio on build servers with same account or by using workspace sidekicks from TFS Sidekicks tool.
You don't necessary have to delete the workspace, something apparently going wrong here.
The message is just telling you that you attempt to create a new workspace with a mapping that is already used by another workspace.
For instance:
WorkspaceA already exists, it has one mapping: $\ to c:\pipo
Any attempt to create a WorkspaceB with a mapping that use c:\pipo (or a subfolder) will failed.
Maybe you create a previous Build Definition that use the same local path as the one you're trying to run: this will fail the same way.
To sum up there's per default one Workspace per Build Definition with the ability to make it persistent or not (mainly for speed optimization during the get of files), make sure two build definition don't use the same path in local.
tf workspaces looks at the workspace cache file to provide output. If you're running tf as yourself, you will only see workspaces that you have connected to. Thus, you would not see the build user's workspaces (regardless of the /owner option, which simply acts as a filter.)
Either run tf workspaces as the build user, or use the /collection argument to force a query of the workspaces on the server, bypassing the cache.
I have been trying to publish my service to windows azure. The service consists of a single webRole, however I have added remote login functionality published it and built it a few times, and now all the sudden it will not build. The reason it gives is that
Details below:
"Error 56 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\Program Files (x86)\MSBuild\Microsoft\Cloud Service\1.0\Visual Studio 10.0\Microsoft.CloudService.targets 202 5 FileSystemCreator"
I have gone on all the forums, I have used CSPack command line for packaging the service which is fine but I'm having a really hard time configuring the certificate for remote desktop connect and I would like to take advantage of this feature as I am creating some websites in the onStart event and I would like to peek into IIS. Some microsoft employees do agree that this is a bug and the have promised a fix this issue, refer to post . I am using VS2010 and I do not know how to fix this bug.
Can anyone please help, or point me to a place where I can get any help.
I ran into the same problem with a new solution.
Note that, unlike Eugenio Pace's response suggests, the error occurs only when deploying to Azure (and not when running the project in the Azure Compute Emulator).
Try adding the following line to the first property group of your Windows Azure Visual Studio Project file (*.ccproj):
<ServiceOutputDirectory>C:\Azure\</ServiceOutputDirectory>
The trailing slash (for whatever path you select) appears to be required. This folder will be deleted each time you create a package if it exists.
This setting seems to redirect the working folder for the package to a shorter base path, preventing the path too long error.
Credit goes to: http://govada.blogspot.com/2011/12/windows-azure-package-build-error.html
Perhaps the local folder used to store temporary development fabric is too long. See Windows Azure - Resolving "The Path is too long after being fully qualified" Error Message.
I was having this problem as well when deploying a Node.js project to Azure.
To fix it, I had to change my "TEMP" and "TMP" user environment variables to something shorter than their default values.
In my case, they were pointing by default to %USERPROFILE%\AppData\Local\Temp, changing them to C:\Temp solved it.
Make sure you restart Windows after.
The better solution may be to create a symbolic link to your project folder. This doesn't require moving files or changing system variables. Open up the command prompt as an administrator and run this:
mklink /D C:\Dev C:\Users\danzo\Source\Workspaces
Obviously you can change "C:\Dev" to whatever you want it to be and you'll need to change the longer path above to the root directory of your soltions/projects folder.
Same problem happened to me when I try Packaging an Umbraco project for Azure (https://github.com/WindowsAzure-Accelerators/wa-accelerator-umbraco/wiki/Deployment), I found the solution is to: Copy and rename the long-name path and folder to "C:\someshortname".
(solution was suggested by this: link)
I tried all the above 2 approaches:
-change TEMP and TMP enviromental variables
-<ServiceOutputDirectory> path
and didn't work.
In my case, I had to move the whole project to a shorter path C:\ and worked.
I'm using W7 and VS12.
When you run a cloud service on the development fabric, the development fabric uses a temporary folder to store a number of files including local storage locations, cached binaries, configuration, diagnostics information and cached compiled web site content.
By default this location is: C:\Users\\AppData\Local\dftmp
Credit goes to Jim Nakashima of Microsoft :
https://blogs.msdn.microsoft.com/jnak/2010/01/14/windows-azure-resolving-the-path-is-too-long-after-being-fully-qualified-error-message/
In order to change the temporary folder, a user environment variable has to be created :
It is named _CSRUN_STATE_DIRECTORY
Give it a value of short named directory like :
c:\AzureTemp
Don't forget to restart Visual Studio in order to have the environmennt variables to be read again
It fixed many compilations problem !