Easy question here. I want to add sonar to be executed on every Maven build. I tried:
<plugin>
<groupId>org.sonarsource.scanner.maven</groupId>
<artifactId>sonar-maven-plugin</artifactId>
<version>3.1.1</version>
</plugin>
and
<plugin>
<groupId>org.codehaus.sonar</groupId>
<artifactId>sonar-maven-plugin</artifactId>
<version>5.1</version>
</plugin>
and
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>sonar-maven-plugin</artifactId>
<version>2.7.1</version>
</plugin>
because a) I couldn't figure out what the plug-ins do and/or b) which one is the current one.
If I only add the above to <build> -> <plugins> it's not executed ever (so the plug-in doesn't have a default execution). So of course I added a <execution> instruction, and after that Sonar gets executed, but with the following error message:
<executions>
<execution>
<phase>prepare-package</phase>
<goals>
<goal>sonar</goal>
</goals>
</execution>
</executions>
Failed to execute goal org.sonarsource.scanner.maven:sonar-maven-plugin:3.1.1:sonar (default) on project org.acme.project.build: Can not execute Findbugs: This project contains Java source files that are not compiled.
It does not seem to matter which phase I use (I tried validate and compile and test and prepare-package and package even though not all of them make sense). I am sure there is no source code generation anywhere in the project. And the static classes get compiled just fine.
I think the problem might be that the plug-in gets executed for every module, including the parent pom project. Which is weird, because sonar:sonar skips that project.
But the project structure is simple and I can't find anything unusual about it:
<groupId>group</groupId>
<artifactId>org.acme.project.build</artifactId>
<version>0.0.1-SNAPSHOT</version>
<packaging>pom</packaging>
<modules>
<module>org.acme.project</module>
</modules>
<profiles>
<profile>
<id>sonar</id>
<properties>
<sonar.host.url>http://sonar.acme.org/</sonar.host.url>
</properties>
<build>
<plugins>
<plugin>
<groupId>org.sonarsource.scanner.maven</groupId>
<artifactId>sonar-maven-plugin</artifactId>
<version>3.1.1</version>
<executions>
<execution>
<phase>compile</phase>
<goals>
<goal>sonar</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
</profile>
</profiles>
The project org.acme.project has nothing besides its own artifact ID and the parent. The command line is: mvn clean deploy -Dsonar.login=Wile.Coyote -Dsonar.password=*********** -Psonar
The log shows that sonar is always executed before the install phase, which of course is way to early.
So how do I use Sonar's Maven plug-in to analyze my code?
a) I couldn't figure out what the plug-ins do
The plugin is used to gather the details from code coverage reports and the repository code scanning for getting to analyze possible bugs, duplications etc. You can search for a sample sonar report to find what all and how to get these details with maven using two methods like settings.xml and maven plugin is detailed at SonarQube Scanner for Maven and
SonarQube - analyzing with Maven
b) which one is the current one.
The maven central suggests that the current plugin from org.codehaus.mojo used as
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>sonar-maven-plugin</artifactId>
<version>3.2</version>
</plugin>
has been moved to
<plugin>
<groupId>org.sonarsource.scanner.maven</groupId>
<artifactId>sonar-maven-plugin</artifactId>
<version>3.2</version>
</plugin>
So you should ideally be using the one from groupId - org.sonarsource.scanner.maven as also suggested by the SonarQube Docs
Also the artifact from org.codehaus.sonar version 5.1 seems to be outdated and not maintained.
I am using the maven-docbkx-plugin to generate HTML and PDF output from docbook sources. I have several books, and these link to each other using olinks.
The olink database is generated in one maven phase (generate-resources), and the actual HTML and PDF generation, which looks up this database is executed in a subsequent maven phase (compile).
I have divided the maven project into a multi-module project, as each book has tens of included sub-documents. The docbkx-maven-plugin configuration is all done in the parent, then it is just the top-level docbook source that needs to be specified in the child POM.
But ... this does not work dependency-wise, as each module requires that the generate-resources of every other module has been run before it runs its compile phase, so that it can access the olink database of each of the other books.
Is there a way to do this in maven? Or will I need to re-structure into two maven projects (which will break the modularity of this project considerably, as all of the configuration will need to be declared in each project)?
The structure of the parent POM is:
...
<build>
<plugins>
<pluginManagenent>
<plugin>
<groupId>com.agilejava.docbkx</groupId>
<artifactId>docbkx-maven-plugin</artifactId>
<version>2.0.14</version>
<executions>
<execution>
<id>xrefdb</id>
<phase>generate-resources</phase>
<configuration>
...
</configuration>
<goals>
<goal>generate-html</goal>
</goals>
</execution>
<execution>
<id>html</id>
<phase>compile</phase>
<configuration>
...
</configuration>
<goals>
<goal>generate-html</goal>
</goals>
</execution>
</executions>
</plugin>
</pluginManagement>
</plugins>
</build>
</project>
And the modules:
<project>
...
<build>
<plugins>
<plugin>
<groupId>com.agilejava.docbkx</groupId>
<artifactId>docbkx-maven-plugin</artifactId>
<version>2.0.14</version>
<configuration>
...
</configuration>
</plugin>
</plugins>
</build>
</project>
I've done a bit more research on this, and from what I have read, what I am asking is not possible (but I would be happy to be advised otherwise). I have split my project into two, and given them a common parent from which they can draw their common configuration.
Another way I've solved this problem is to use maven profiles. I perform the first pass of all the modules in the first profile, then perform the second pass in a second profile.
It means the project has to be run twice to build all of its artifacts, but it is much more maintainable than spreading the sources over multiple projects.
I have a maven project that uses the aspectj-compiler-plugin. I use intertype declarations so there are references to Aspect code in my Java code. Because of this, the maven-compiler-plugin fails to compile since it does not compile the aspect code.
My question is: how do I disable the maven-compiler-plugin from running because it is not doing anything useful?
There are several ways that I can get this project compiling, but they are sub-optimal:
Add exclusion filters to the maven-compiler-plugin. The plugin will still run, but it will not try to compile anything. Problem is that this breaks the ajdt project configurator in Eclipse
Move all java code to the aspectj folders. This doesn't feel right either.
You can disable the a plugin by set the phase of the plugin to none.
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<executions>
<execution>
<id>default-compile</id>
<phase>none</phase>
</execution>
</executions>
</plugin>
</plugins>
</build>
In Maven 3, the following will do this, for example disabling the clean plugin:
<build>
<plugins>
<plugin>
<artifactId>maven-clean-plugin</artifactId>
<version>2.4.1</version>
<executions>
<execution>
<id>default-clean</id>
<phase>none</phase>
</execution>
</executions>
</plugin>
</plugins>
</build>
The same technique can be used for any other plugin defined in the super-POM, the packaging type, or the parent POM. The key point is that you must copy the <id> shown by help:effective-pom, and change the <phase> to an invalid value (e.g. "none"). If you don't have the <id> (as e.g. in Jintian DENG's original answer – it has since been edited to add one), it will not work, as you have discovered.
Either configure the skipMain parameter:
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<configuration>
<skipMain>true</skipMain>
</configuration>
</plugin>
</plugins>
</build>
Or pass the maven.main.skip property:
mvn install -Dmaven.main.skip=true
The reason maven-compiler-plugin executes in the first place is because you trigger one of the default lifecycle bindings. For example if you're packaging jar using mvn package, it will trigger compile:compile at compile phase.
Maybe try not to use the default lifecycle, but use mvn aspectj:compile instead.
http://maven.apache.org/guides/introduction/introduction-to-the-lifecycle.html has more information about maven default lifecycle bindings
I'm trying to create an aggregate Javadoc site for all the modules in my project, but I can't seem to configure the plugin in a way that is satisfactory. Mainly, I can't seem to get it to aggregate the javadocs all the while detecting links and excluding certain packages. Essentially, it appears the configuration of the plugin is ignored entirely.
I have a root pom.xml that refers to a bunch of submodules and contains the following configuration:
<modules>
<module>foo</module>
<module>bar</module>
</modules>
<build>
<plugins>
<plugin>
<groupId>org.maven.apache.plugins</groupId>
<artifactId>maven-javadoc-plugin</artifactId>
<version>2.9</version>
<executions>
<execution>
<id>aggregate</id>
<phase>site</phase>
<goals>
<goal>aggregate</goal>
</goals>
<configuration>
<links>
<link>http://docs.oracle.com/javase/6/docs/api</link>
<link>http://static.netty.io/3.5/api</link>
<link>http://google-guice.googlecode.com/git/javadoc</link>
<link>http://docs.guava-libraries.googlecode.com/git-history/release/javadoc</link>
<link>http://fasterxml.github.com/jackson-databind/javadoc/2.0.4</link>
<link>https://developers.google.com/protocol-buffers/docs/reference/java</link>
</links>
<bootclasspath>${sun.boot.class.path}</bootclasspath>
<additionalJOption>-J-Xmx1024m</additionalJOption>
<detectJavaApiLink>true</detectJavaApiLink>
<detectLinks>true</detectLinks>
<excludePackageNames>*.testing.*</excludePackageNames>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
But when I run mvn javadoc:aggregate with this setup, I end up with a javadoc site that has no links to any of the referenced libraries and still includes all the testing classes.
I don't even see the plugin attempting to download the package-list for each declared link source.
On the other hand, generating the javadoc for each individual module works well and as expected.
What am I getting wrong?
Plugin configurations can be placed on two levels; inside the execution tag or outside of it ("global").
When the configuration is inside the execution tag it belongs to that particular execution. In your case you will have to run mvn site for it to execute since it is bound to that phase.
When the mvn javadoc:aggregate command is used it looks for the "global" configuration. In your pom there is no such configuration and thus it uses the default configuration.
Change your plugin configuration to this instead:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-javadoc-plugin</artifactId>
<version>2.9</version>
<configuration>
<links>
<link>http://docs.oracle.com/javase/7/docs/api</link>
<link>http://static.netty.io/3.5/api</link>
<link>http://google-guice.googlecode.com/git/javadoc</link>
<link>http://docs.guava-libraries.googlecode.com/git-history/release/javadoc</link>
<link>http://fasterxml.github.com/jackson-databind/javadoc/2.0.4</link>
<link>https://developers.google.com/protocol-buffers/docs/reference/java</link>
</links>
<bootclasspath>${sun.boot.class.path}</bootclasspath>
<additionalJOption>-J-Xmx1024m</additionalJOption>
<detectJavaApiLink>true</detectJavaApiLink>
<detectLinks>true</detectLinks>
<excludePackageNames>*.testing.*</excludePackageNames>
</configuration>
<executions>
<execution>
<id>aggregate</id>
<phase>site</phase>
<goals>
<goal>aggregate</goal>
</goals>
</execution>
</executions>
</plugin>
You can place a configuration inside the execution part to override and specialize the configuration for that execution.
BTW The <groupId> is wrong in your pom. It should be
<groupId>org.apache.maven.plugins</groupId>
and not
<groupId>org.maven.apache.plugins</groupId>
I'm using Maven 3.0.3 on Mac 10.6.6. I have a JAR project and when I run the command "mvn clean install:install", I'm getting the error,
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-install-plugin:2.3.1:install (default-cli) on project StarTeamCollisionUtil: The packaging for this project did not assign a file to the build artifact -> [Help 1]
What does this mean and how can I fix it? Below is my pom.xml. Let me know what other info would be helpful and I'll edit this post. Thanks, - Dave
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.myco.starteam.util</groupId>
<artifactId>StarTeamCollisionUtil</artifactId>
<packaging>jar</packaging>
<name>StarTeam Collision Util</name>
<version>1.0-SNAPSHOT</version>
<properties>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
</properties>
<repositories>
<repository>
<id>myco-sonatype-nexus-snapshots</id>
<name>MyCo Sonatype-Nexus Snapshots</name>
<url>http://sonatype.myco.com/nexus/content/repositories/snapshots/</url>
</repository>
</repositories>
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.8.1</version>
</plugin>
</plugins>
</build>
</project>
I don't know if this is the answer or not but it might lead you in the right direction...
(I believe these steps are for people working with Intellij IDE. The install:install is available in the Maven panel on the right by default. The below steps are alternative to it.)
The command install:install is actually a goal on the maven-install-plugin. This is different than the install maven lifecycle phase.
Maven lifecycle phases are steps in a build which certain plugins can bind themselves to. Many different goals from different plugins may execute when you invoke a single lifecycle phase.
What this boils down to is the command...
mvn clean install
is different from...
mvn clean install:install
The former will run all goals in every cycle leading up to and including the install (like compile, package, test, etc.). The latter will not even compile or package your code, it will just run that one goal. This kinda makes sense, looking at the exception; it talks about:
StarTeamCollisionUtil: The packaging for this project did not assign a file to the build artifact
Try the former and your error might just go away!
TL;DR To fix this issue, invoke packaging plugin before, e.g. for jar packaging use maven-jar-plugin , as following:
mvn jar:jar install:install
Or
mvn jar:jar deploy:deploy
If you actually needed to deploy.
Gotcha This approach won't work if you have multi-module project with different packagings (ear/war/jar/zip) – even worse, wrong artifacts will be installed/deployed! In such case use reactor options to only build the deployable module (e.g. the war).
Explanation
In some cases you actually want to run directly a install:install or deploy:deploy goal (that is, from the maven-deploy-plugin, the deploy goal, not the Maven deploy phase) and you would end up in the annoying The packaging for this project did not assign a file to the build artifact.
A classic example is a CI job (a Jenkins or Bamboo job, e.g.) where in different steps you want to execute/care about different aspects:
A first step would be a mvn clean install, performing tests and test coverage
A second step would be a Sonarqube analysis based on a quality profile, e.g. mvn sonar:sonar plus further options
Then, and only after successful tests execution and quality gate passed, you want to deploy to your Maven enterprise repository the final project artifacts, yet you don't want to re-run mvn deploy, because it would again execute previous phases (and compile, test, etc.) and you want your build to be effective but yet fast.
Yes, you could speed up this last step at least skipping tests (compilation and execution, via -Dmaven.test.skip=true) or play with a particular profile (to skip as many plugins as possible), but it is much easier and clear to simply run mvn deploy:deploy then.
But it would fail with the error above, because as also specified by the plugin FAQ:
During the packaging-phase all gathered and placed in context. With this mechanism Maven can ensure that the maven-install-plugin and maven-deploy-plugin are copying/uploading the same set of files. So when you only execute deploy:deploy, then there are no files put in the context and there is nothing to deploy.
Indeed, the deploy:deploy needs some runtime information placed in the build context by previous phases (or previous plugins/goals executions).
It has also reported as a potential bug: MDEPLOY-158: deploy:deploy does not work for only Deploying artifact to Maven Remote repo
But then rejected as not a problem.
The deployAtEnd configuration option of the maven-deploy-plugin won't help neither in certain scenarios because we have intermediate job steps to execute:
Whether every project should be deployed during its own deploy-phase or at the end of the multimodule build. If set to true and the build fails, none of the reactor projects is deployed. (experimental)
So, how to fix it?
Simply run the following in such a similar third/last step:
mvn jar:jar deploy:deploy
The maven-jar-plugin will not re-create any jar as part of your build, thanks to its forceCreation option set to false by default:
Require the jar plugin to build a new JAR even if none of the contents appear to have changed. By default, this plugin looks to see if the output jar exists and inputs have not changed. If these conditions are true, the plugin skips creation of the jar.
But it will nicely populate the build context for us and make deploy:deploy happy. No tests to skip, no profiles to add. Just what you need: speed.
Additional note: if you are using the build-helper-maven-plugin, buildnumber-maven-plugin or any other similar plugin to generate meta-data later on used by the maven-jar-plugin (e.g. entries for the Manifest file), you most probably have executions linked to the validate phase and you still want to have them during the jar:jar build step (and yet keep a fast execution). In this case the almost harmless overhead is to invoke the validate phase as following:
mvn validate jar:jar deploy:deploy
Yet another additional note: if you have not jar but, say, war packaging, use war:war before install/deploy instead.
Gotcha as pointed out above, check behavior in multi module projects.
This reply is on a very old question to help others facing this issue.
I face this failed error while I were working on my Java project using IntelliJ IDEA IDE.
Failed to execute goal org.apache.maven.plugins:maven-install-plugin:2.4:install (default-cli) on project getpassword: The packaging for this project did not assign a file to the build artifact
this failed happens, when I choose install:install under Plugins - install, as pointed with red arrow in below image.
Once I run the selected install under Lifecycle as illustrated above, the issue gone, and my maven install compile build successfully.
I have same issue.
Error message for me is not complete. But in my case, I've added generation jar with sources. By placing this code in pom.xml:
<build>
<pluginManagement>
<plugins>
<plugin>
<artifactId>maven-source-plugin</artifactId>
<version>2.1.2</version>
<executions>
<execution>
<phase>deploy</phase>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</pluginManagement>
</build>
So in deploy phase I execute source:jar goal which produces jar with sources. And deploy ends with BUILD SUCCESS
This error shows up when using the maven-install-plugin version 3.0.0-M1 (or similar)
As already mentioned above and also here the following plug-in version works:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-install-plugin</artifactId>
<version>2.5.2</version>
</plugin>
you must clear the target file such as in jar and others
In C: drive your folder at .m2 see the location where it install and delete the .jar file,Snaphot file and delete target files then clean the application you found it will be run
While #A_Di-Matteo answer does work for non multimodule I have a solution for multimodules.
The solution is to override every plugin configuration so that it binds to the phase of none with the exception of the jar/war/ear plugin and of course the deploy plugin. Even if you do have a single module my rudimentary tests show this to be a little faster (for reasons I don't know) performance wise.
Thus the trick is to make a profile that does the above that is activated when you only want to deploy.
Below is an example from one of my projects which uses the shade plugin and thus I had to re-override the jar plugin not to overwrite:
<profile>
<id>deploy</id>
<activation>
<property>
<name>buildStep</name>
<value>deploy</value>
</property>
</activation>
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<executions>
<execution>
<id>default-compile</id>
<phase>none</phase>
</execution>
<execution>
<id>default-testCompile</id>
<phase>none</phase>
</execution>
<execution>
<id>test-compile</id>
<phase>none</phase>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<executions>
<execution>
<id>default-test</id>
<phase>none</phase>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-install-plugin</artifactId>
<executions>
<execution>
<id>default-install</id>
<phase>none</phase>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-resources-plugin</artifactId>
<executions>
<execution>
<id>default-resources</id>
<phase>none</phase>
</execution>
<execution>
<id>default-testResources</id>
<phase>none</phase>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-shade-plugin</artifactId>
<executions>
<execution>
<id>default</id>
<phase>none</phase>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-jar-plugin</artifactId>
<executions>
<execution>
<id>default-jar</id>
<configuration>
<forceCreation>false</forceCreation>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
</profile>
Now if I run mvn deploy -Pdeploy it will only run the jar and deploy plugins.
How you can figure out which plugins you need to override is to run deploy and look at the log to see which plugins are running. Make sure to keep track of the id of the plugin configuration which is parens after the name of the plugin.
I had the same issue but I executed mvn install initially (not install:install as it was mentioned earlier).
The solution is to include:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-install-plugin</artifactId>
<version>2.5.2</version>
</plugin>
Into plugin management section.
This worked for me when I got the same error message...
mvn install deploy
I have seen this error occur when the plugins that are needed are not specifically mentioned in the pom. So
mvn clean install
will give the exception if this is not added:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-install-plugin</artifactId>
<version>2.5.2</version>
</plugin>
Likewise,
mvn clean install deploy
will fail on the same exception if something like this is not added:
<plugin>
<artifactId>maven-deploy-plugin</artifactId>
<version>2.8.1</version>
<executions>
<execution>
<id>default-deploy</id>
<phase>deploy</phase>
<goals>
<goal>deploy</goal>
</goals>
</execution>
</executions>
</plugin>
It makes sense, but a clearer error message would be welcome
You are missing properties tag:
<properties>
<maven.compiler.source>1.8</maven.compiler.source>
<maven.compiler.target>1.8</maven.compiler.target>
</properties>
A working version of pom.xml file should look like this:
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>org.example</groupId>
<artifactId>se-lab1</artifactId>
<version>1.0-SNAPSHOT</version>
<properties>
<maven.compiler.source>1.8</maven.compiler.source>
<maven.compiler.target>1.8</maven.compiler.target>
</properties>
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-assembly-plugin</artifactId>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
<configuration>
<archive>
<manifest>
<mainClass>
org.hkr.Main
</mainClass>
</manifest>
</archive>
<descriptorRefs>
<descriptorRef>jar-with-dependencies</descriptorRef>
</descriptorRefs>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.19.1</version>
<dependencies>
<dependency>
<groupId>org.junit.platform</groupId>
<artifactId>junit-platform-surefire-provider</artifactId>
<version>1.1.0</version>
</dependency>
<dependency>
<groupId>org.junit.jupiter</groupId>
<artifactId>junit-jupiter-engine</artifactId>
<version>5.1.0</version>
</dependency>
</dependencies>
</plugin>
</plugins>
</build>
<dependencies>
<dependency>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.8.1</version>
</dependency>
</dependencies>
</project>
I hope this helps someone but I accidentally added a module to my project and it changed my pom file from
<packaging>jar</packaging>
to
<packaging>pom</packaging>
so I just changed it back to
<packaging>jar</packaging>
and it worked to create the jar again
I have encountered a similar issue:
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-install-plugin:3.0.1:install (default-install) on project MyProject: The packaging for this project did not assign a file to the build artifact -> [Help 1]
In my case, the error was due to blank spaces in my project directory path e.g.:
~\Documents\Job\My Project\my-project
I have renamed the directory in order to have a project path without blank spaces and it worked fine.