I am currently developing an maven based application. I want to make a bat file to run final jar. I've wrote bat file with call to java -jar... and put it into src/main/resources/runners folder. I also do not want to add this file to jar, so i excluded it from resources plugin. The problem is that bat is not copied. I've copypasted maven-resources-plugin configuration from their site, it does not work. However, i want copy bat only while calling jar:jar.
Application is hosted here, so you can see details there. I tried to bind copying as such:
<plugin>
<artifactId>maven-resources-plugin</artifactId>
<version>2.5</version>
<executions>
<execution>
<id>copy-resources</id>
<!-- here the phase you need -->
<phase>validate</phase>
<goals>
<goal>copy-resources</goal>
</goals>
<configuration>
<outputDirectory>${basedir}/target</outputDirectory>
<resources>
<resource>
<directory>src/main/runners</directory>
</resource>
</resources>
</configuration>
</execution>
</executions>
</plugin>
Also tried <phase>package</phase> and <goal>jar</goal> (and <goal>jar:jar</goal>). No effect.
By the way: where can i read about maven phases and goals more detailed, then in official documentation (understood nothing from it)?
You could use the pre-integration-test phase, which will only be run if your jar was succesfully created by the build. You will then need to run a build through integration-test, verify, install, or deploy to ensure that the copy-resources is run.
<plugin>
<artifactId>maven-resources-plugin</artifactId>
<version>2.5</version>
<executions>
<execution>
<id>copy-builders</id>
<!-- here the phase you need -->
<phase>pre-integration-test</phase>
<goals>
<goal>copy-resources</goal>
</goals>
<configuration>
<outputDirectory>${project.build.directory}</outputDirectory>
<resources>
<resource>
<directory>src/main/runners</directory>
</resource>
</resources>
</configuration>
</execution>
</executions>
</plugin>
You can read more about the lifecycle at: http://maven.apache.org/guides/introduction/introduction-to-the-lifecycle.html.
Related
I have a webapp that I need to copy the Java files into my output Quarkus application because I display the code snippets as help in the web pages. Currently the only way I could figure it out is by always calling compile when running mvn compile quarkus:dev goal. However this is not standard as most Quakrus apps just work with mvn quarkus:dev out of the box!
My question is how to I attach to the Quarkus lifecycle of plugins?
My current copy-resources only works in compile phase which does not seem to run in quarkus:dev mode.
Copy Resources Plugin:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-resources-plugin</artifactId>
<version>3.3.0</version>
<executions>
<execution>
<id>copy-java-files</id>
<phase>process-resources</phase>
<goals>
<goal>copy-resources</goal>
</goals>
<configuration>
<propertiesEncoding>UTF-8</propertiesEncoding>
<outputDirectory>${project.build.outputDirectory}</outputDirectory>
<resources>
<resource>
<directory>src/main/java</directory>
<filtering>false</filtering>
</resource>
</resources>
</configuration>
</execution>
</executions>
</plugin>
Current Quarkus Plugin:
<plugin>
<groupId>io.quarkus</groupId>
<artifactId>quarkus-maven-plugin</artifactId>
<version>${quarkus.version}</version>
<extensions>true</extensions>
<executions>
<execution>
<goals>
<goal>build</goal>
<goal>generate-code</goal>
<goal>generate-code-tests</goal>
</goals>
</execution>
</executions>
</plugin>
Any help our guidance would be appreciated!
I have tried many different <phase> attributes for my plugin but none of them seem to execute in the Quarkus lifecycle and I could not find any documentation on Quakrus site how to do so?
Reported as an enhancement to Quarkus: https://github.com/quarkusio/quarkus/issues/30166
A good workaround suggested by user "famod" is to create a profile and then just call mvn -Pqdev with the following profile.
<profile>
<id>qdev</id>
<build>
<defaultGoal>compile quarkus:dev</defaultGoal>
</build>
</profile>
I currently have some Maven projects which when I install the project I need to copy all files from the conf folder to the target folder.
|-Project
|--src
|--conf <--FROM HERE -->
|--lib
|--target <--TO HERE-->
I have attempted this in the pom.xml to no avail. What am I doing wrong? My plugin part of the pom.xml is below:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-resources-plugin</artifactId>
<version>2.6</version>
<executions>
<execution>
<id>copy-resources</id>
<phase>install</phase>
<goals>
<goal>copy-resources</goal>
</goals>
<configuration>
<outputDirectory>${basedir}/target</outputDirectory>
<resources>
<resource>
<directory>${basedir}/conf</directory>
<includes>
<include>*</include>
</includes>
</resource>
</resources>
</configuration>
</execution>
</executions>
Your problem is that you copy the resources in the phase install. In that phase your target archive is already built and copied to your local repository. See the Maven lifecycle. You'll propably want to do it in the process-resources phase.
Dealing with a legacy project, I have the need to load text resources from a jar at an URL.
The text resources will be then filtered and included in the output; those resources come from a released artifact.
From resource-plugin I see it is only possible to give a number of directories; would it be possible to load resources as I need?
I want to do somthing like this, but using a remote jar instead of the oher project in the workspace:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-resources-plugin</artifactId>
<executions>
<execution>
<id>copy-resources</id>
<phase>process-resources</phase>
<goals>
<goal>copy-resources</goal>
</goals>
<configuration>
<outputDirectory>${project.build.directory}/${project.build.finalName}</outputDirectory>
<resources>
<resource>
<directory>../<another project on the same workspace>/src/main/filtered-resources</directory>
<filtering>true</filtering>
</resource>
</resources>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
Remote resource plugin, as suggested in one of the answer doesn't work because no file from the imported bundle ends up in target; there is no way I can produce the original bundle using remote resource plugin (it's a legacy projetc still in use and completely out of my control).
I think the Maven Remote Resources Plugin will suit your needs.
EDIT:
Snippet obtained from the usage page of the plugin. That XML fragment will attach the plugin to the generate-sources phase (choose a different one if it doesn't fit your needs), will download the apache-jar-resource-bundle artifact and uncompress its contents into ${project.build.directory}/maven-shared-archive-resources.
For better results is recommended that the resources artifact had been created using the bundle goal of the same plugin.
<!-- Turn this into a lifecycle -->
<plugin>
<artifactId>maven-remote-resources-plugin</artifactId>
<version>1.4</version>
<executions>
<execution>
<id>process-remote-resources</id>
<phase>generate-sources</phase>
<goals>
<goal>process</goal>
</goals>
<configuration>
<resourceBundles>
<resourceBundle>org.apache:apache-jar-resource-bundle:1.0</resourceBundle>
</resourceBundles>
</configuration>
</execution>
</executions>
</plugin>
EDIT 2: Alternative Solution using AntRun
If your artifacts don't suit Maven needs and you need something more customized, then using AntRun plugin you could get it somehow:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-antrun-plugin</artifactId>
<version>1.7</version>
<executions>
<execution>
<id>download-remote-resources</id>
<goals>
<goal>run</goal>
</goals>
<configuration>
<target>
<get src="URL of the resource" dest="${project.build.directory}" />
<unzip src="${project.build.directory}/filename.[jar|zip|war]" dest="${project.build.directory}/${project.build.finalName}" />
</target>
</configuration>
</execution>
</executions>
</plugin>
I want to update my pom.xml so that when someone uses: mvn clean package, the generated jar file is copied to the current directory. I'm looking at the maven plugin copy-resources, but i'm not sure how to specify the current directory, is there an operating system agnostic way to do this? Would like it to also work on windows, if possible
<plugin>
<artifactId>maven-resources-plugin</artifactId>
<version>2.4.3</version>
<executions>
<execution>
<id>copy-resources</id>
<!-- here the phase you need -->
<phase>validate</phase>
<goals>
<goal>copy-resources</goal>
</goals>
<configuration>
<outputDirectory>${basedir}</outputDirectory>
<resources>
<resource>
<directory>target/Test-0.0.1-SNAPSHOT.jar</directory>
<filtering>true</filtering>
</resource>
</resources>
</configuration>
</execution>
</executions>
</plugin>
Thanks
If by current directory you mean ${project.basedir} then yes you can do this easily. Just make sure you use ${build.finalName}.jar as the file name part as it will properly get the main artifact of a project with <packaging> set to jar (the default).
<execution>
<id>copy-resources</id>
<!-- here the phase you need -->
<phase>validate</phase>
<goals>
<goal>copy-resources</goal>
</goals>
<configuration>
<outputDirectory>${project.basedir}</outputDirectory>
<resources>
<resource>
<!-- Get main artifact -->
<directory>target/${build.finalName}.jar</directory>
<!-- Don't filter binary files -->
<filtering>false</filtering>
</resource>
</resources>
</configuration>
</execution>
If you wanted to do the current working directory instead you should be able to do it using ${user.dir} as the outputDirectory
I'm building a web application project using maven, and packaging is set to "war". I also use YUI compressor plugin to compress javascript codes in the webapp directory. I've set up the YUI compressor like this:
<plugin>
<groupId>net.alchim31.maven</groupId>
<artifactId>yuicompressor-maven-plugin</artifactId>
<version>1.3.0</version>
<executions>
<execution>
<phase>process-resources</phase>
<goals>
<goal>compress</goal>
</goals>
</execution>
</executions>
<configuration>
<excludes>
<exclude>**/ext-2.0/**/*.js</exclude>
<exclude>**/lang/*.js</exclude>
<exclude>**/javascripts/flot/*.js</exclude>
<exclude>**/javascripts/jqplot/*.js</exclude>
</excludes>
<nosuffix>true</nosuffix>
<force>true</force>
<jswarn>false</jswarn>
</configuration>
</plugin>
If I do: mvn process-resources, src/main/webapp will get copied over to target/webapp-1.0/ directory, and javacripts are compressed. However, when I run mvn install, all the compressed javascripts are overwritten, apparently the packaging process copies the content from main/webapp one time before building the war file.
How can I get around this?
As you noticed, the /src/main/webapp dir (aka warSourceDirectory) contents is not copied into the project dir for packaging until the war plugin executes during the package phase. When the war plugin completes the archive is already built; too late to modify those resources. If the .js files you want to compress were moved into another directory (outside of /src/main/webapp) then you could do something like the below.
To test, I created a ${basedir}/src/play directory with a couple of files in it. I used the resource plugin for the example; you'd replace that config with the YUI compressor plugin config you needed and simply add the <webResource> element to your war plugin config as shown below; more info in the war plugin examples. My war ended up with the additional files right where I wanted them.
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-resources-plugin</artifactId>
<executions>
<execution>
<id>copy-resources</id>
<phase>process-resources</phase>
<goals><goal>copy-resources</goal></goals>
<configuration>
<outputDirectory>${project.build.directory}/tmpPlay</outputDirectory>
<resources>
<resource>
<directory>${project.basedir}/src/play</directory>
<includes>
<include>**/*</include>
</includes>
</resource>
</resources>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-war-plugin</artifactId>
<executions>
<execution>
<id>default-war</id>
<configuration>
<webResources>
<resource>
<directory>${project.build.directory}/tmpPlay</directory>
<targetPath>WEB-INF/yourLocationHere</targetPath>
<includes>
<include>**/*</include>
</includes>
</resource>
</webResources>
</configuration>
</execution>
</executions>
</plugin>
I think #user944849 answer is the correct answer, at least one of the correct answers. Another way of archiving this is to exclude the modified javascript directory from maven-war-plugin configuration, e.g.:
<plugin>
<artifactId> maven-war-plugin </artifactId>
<configuration>
<warSourceExcludes>**/external/ dojo/**/*.js </warSourceExcludes>
</configuration>
</plugin>
this will tell maven-war-plugin not to copy from the excluded directory, but since the modified javascript directory is already there, the war file still contains the javascript directory, BUT with the modified, in this case, compressed javascript codes.
in your execution directive, set the phase for applying your compression and copying to be install and that will hopefully do the trick. the code should be something like this:
<executions>
<execution>
....
<phase>install</phase>
....
</execution>
<executions>
Here is my solution, simply add an antrun plugin which updates the packaged war file using the processed outputs, which binds to the package phase:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-antrun-plugin</artifactId>
<executions>
<execution>
<id>package</id>
<phase>package</phase>
<configuration>
<target>
<zip basedir="${project.build.directory}/${project.build.finalName}"
destfile="${project.build.directory}/${project.build.finalName}.war"
update="true">
</zip>
</target>
</configuration>
<goals>
<goal>run</goal>
</goals>
</execution>
</executions>
</plugin>