I have worked on how to get performance data.
new counter i need to add in my requiremnet, is "memoryPagesPerSec "
I have use inbuild class to get this counter, but not get the value
it is always zero, while i check in perfmon.exe, it gives some values.
Can some one tell me the reason, or what is the alternate solution in WMI query to get this counter value.
My current code is....
var s1 = new System.Diagnostics.PerformanceCounter("Memory", "Pages/sec");
string s2 = s1.NextValue().ToString();
Console.WriteLine("Test Memory: " + s2.ToString());
I want to change using WMI and need to check this?
Any solution for WMI query for this counter?
try this:
select PagesPersec FROM Win32_PerfFormattedData_PerfOS_Memory
Related
I know that with Descriptive programming you can do something like this:
Browser("StackOverflow").Page("StackOverflow").Link("text:=Go To Next Page ", "html tag:=A").Click
But is it possible to create some kind of string so I can assign more than one data value and pass it as single variable? I've tried many combinations using escape characters and I always get error.
For example in the case above, let's say I have more properties in the Page object, so I'd normally have to do something like this:
Browser("StackOverflow").Page("name:=StackOverflow", "html id:=PageID")...etc...
But I'd like to pass "name:=StackOverflow", "html id:=PageID" as a single variable, so when writing many objects I'd only have to write:
Browser(BrowserString).Page(PageString).WebEdit("name:=asdfgh")
And the first part would remain static, so if the parents' data needs to be modified I'd only have to modify two variables and not all the objects created in all libraries.
Is it possible?
If I was not clear enough please let me know.
Thank you in advance!
I think what you're looking for is UFT's Description object
This allows you finer grained control on the description since in descriptive programming all values are regular expressions but with Description you can turn the regular expression functionality off for a specific property.
Set desc = Description.Create()
desc("html tag").Value = "A"
desc("innertext").Value = "More information..."
desc("innertext").RegularExpression = False
Browser("Example Domain").Navigate "www.example.com"
Browser("Example Domain").Page("Example Domain").WebElement(desc).Click
If you want to represent this with plain string then it's a bit more of a problem, you can write a helper function but I'm not sure I would recommend it.
Function Desc(descString)
Set ret = Description.Create()
values = Split(descString, "::")
For Each value In values
keyVal = Split(value, ":=")
ret(keyVal(0)).Value = keyVal(1)
Next
Set Desc = ret
End Function
' Usage
Browser("StackOverflow").Page("StackOverflow").WebElement(Desc("html tag:=H2::innertext:=some text")).Click
Further reading about descriptive programming.
As an alternative to Motti's excellent answer, you could also Set a variable to match your initial descriptive object and then extend it as required:
Set myPage = Browser("StackOverflow").Page("name:=StackOverflow", "html id:=PageID")
after which you can then use
myPage.WebEdit("name:=asdfgh")
throughout the rest of the code, so long as the myPage object stays in scope...
I know they advice to get a cell value this way:
columnValue = vars.getObject("resultObject").get(0).get("Column Name");
as stated on jMeter doc : component reference : JDBC_Request.
But: How to access the same RS cell value by just a number of the column?
RS.get(0).get(4);
...instead of giving it a String of column Name/Label.
edit 1: Lets use Groovy/Java, instead of BeanShell. Thanks.
edit 2: The original motivation was the difference between column Name / Label, as these seem to be not fully guaranteed (? seems to be not clear here, not to me), especially due case-sensitivity ("id"/"ID", "name"/"Name"/"NAME" ..)
It should be something like:
String value = (new ArrayList<String>(vars.getObject("resultObject").get(0).values())).get(4)
More information: Debugging JDBC Sampler Results in JMeter
Be aware that according to HashMap documentation:
This class makes no guarantees as to the order of the map; in particular, it does not guarantee that the order will remain constant over time.
So the order of columns might be a big question mark.
The row itself is a HashMap, defined in source code as:
HashMap<String, Object> row
So using BeanShell syntax, you could get it as
row = vars.getObject("resultObject").get(0); // returns HashMap
In HashMap, you cannot access item (column) by ID. You could, however, apply one of the methods described here, but HashMap doesn't guarantee order, so you cannot be sure what "column 4" will contain.
If you want to be able to loop through all columns, it's better to do it in a Map style, not by index. For example using entrySet() with BeanShell:
for(Map.Entry entry : row.entrySet())
{
log.info(entry.getKey() + "=" + entry.getValue());
}
See various ways to iterate through Map here.
basically the issue is taking place at the moment when I send some value which is appended to a default value '01/01/2000' somehow. I've tried different ways to do this without succeed, I've used these exact lines in other script and it worked but I don't know why this isn't working here. Please find below the last code I used followed by the picture with the issue displayed.
var targetStartDate = browser.driver.findElement(by.id('StartDate'));
targetStartDate.clear().then(function () {
targetStartDate.sendKeys('09/01/2016');
})
example of the issue
Thanks in advance for any response.
You can try issuing clear() call before sending keys:
targetStartDate.clear();
targetStartDate.sendKeys('09/01/2016');
The other option would be to select all text in the input prior to sending keys:
// protractor.Key.COMMAND on Mac
targetStartDate.sendKeys(protractor.Key.chord(protractor.Key.CONTROL, "a"));
targetStartDate.sendKeys('09/01/2016');
I have encountered this same issue before. There is an input mask formatting the input in the field. In order to solve this, you must write your test as if it were the actual user, with the formatting in mind:
var targetStartDate = browser.driver.findElement(by.id('StartDate'));
// Remove the forward slashes because the input field takes care of that.
var inputDate = '09012016';
targetStartDate.clear();
// Loop through each character of the string and send it to the input
// field followed by a delay of 250 milliseconds to give the field
// enough time to format the input as you keep sending keys.
for (var i = 0; i < inputDate.length; i++) {
targetStartDate.sendKeys(inputDate[i]);
browser.driver.sleep(250);
}
Depending on the latency of the site and performance, you may either need to decrease the 250 millisecond delay, or be able to decrease it.
Hope this helps!
In JMeter I added the configuration for oracle server. Then I added a JDBC request object and put the ResultSet variable name to status.
The test executes fine and result is displayed in treeview listener.
I want to use the variable status and compare it with string but jmeter is throwing error about casting arraylist to string.
How to retrieve this variable and compare with string in While Controller?
Just used some time to figure this out and think the accepted answer is slightly incorrect as the JDBC request sampler has two types of result variables.
The ones you specify in the Variable names box map to individual columns returned by your query and these you can access by saying columnVariable_{index}.
The one you specify in the Result variable name contains the entire result set and in practice this is a list of maps to values. The above syntax will obviously not work in this case.
The ResultSet variable returned with JDBC request in JMeter are in the for of array. So if you want to use variable status, you will have to use it with index. If you want to use the first(or only) record user status_1. So you need to use it like status_{index}.
String host = vars.getObject("status").get(0).get("option_value");
print(host);
log.info("----- " + host);
Form complete infromation read the "yellow box" in this link:
http://jmeter.apache.org/usermanual/component_reference.html#JDBC_Request
Other util example:
http://jmeter.apache.org/usermanual/build-db-test-plan.html
You can use Beanshell/Groovy (same code works) in JSR233 PostProcessor to work with “Result Variable Name” from JDBC Request like this:
ArrayList results = vars.getObject("status");
for (HashMap row: results){
Iterator it = row.entrySet().iterator();
while (it.hasNext()){
Map.Entry pair = (Map.Entry)it.next();
log.info(pair.getKey() + "=" + pair.getValue());
}
}
Instead of output to log replace with adding to string with delimiters of your choice.
I have a very simple query that only returns one record. When I try to get the value out of the only column in the only record, I get "Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record." What's going on here? The code that is causing the error doesn't even execute if RecordCount is 0 and I have verified that the recordset does in fact contain a record.
Code is below. Error is thrown when trying to set strDN. It's so dead simple but I can't figure out where I'm going wrong.
EDITED TO INCLUDE COMMAND
<LDAP://DC=something,DC=com>;(&(objectCategory=person)(objectClass=user)(!userAccountControl:1.2.840.113556.1.4.803:=2)(employeeID=01234567));distinguishedName;subtree
Set adoRecordset = adoCommand.Execute
If adoRecordset.RecordCount > 0 Then
strDN = adoRecordset.Fields("distinguishedName").Value
Set objUser = GetObject("LDAP://" & strDN)
objGroup.add(objUser.ADsPath)
End if
The recordcount property leaves the cursor at the end of the recordset, so you cannot then obtain the record (eof=true), you must movefirst. Use a different cursor type, because the default cursor type is forward only:
'' Assign cursorType that allows forward and backward movement.
adoRecordset.cursorType = 3 ''adOpenStatic
See https://www.w3schools.com/asp/prop_rs_cursortype.asp
I use
If Not adoRecordset.EOF And Not adoRecordset.BOF Then
...
End If
For This Scenario
Try
Set adoRecordset = adoCommand.Execute
If adoRecordset.RecordCount > 0 Then
adoRecordset.MoveFirst 'Move to the first record
strDN = adoRecordset.Fields("distinguishedName").Value
Set objUser = GetObject("LDAP://" & strDN)
objGroup.add(objUser.ADsPath)
End if
-EDIT-
Have a look at the following link. There are some causes listed, and solutions for most of them:
http://classicasp.aspfaq.com/general/why-do-i-get-bof-or-eof-errors.html
[I was wrong about this - thanks, Dave] I believe you need to call adoRecordset.MoveNext (or whatever the call is) before attempting to get the value of a field in the recordset.
Calling adoRecordSet.Requery() after RecordCount request can also help in this situation, if your query isn't that complex to execute it the second time.