I'm facing a strange issue I have created a brand new xamarin forms project and i'm trying to adding Resource file in the shared project but when i add the Resource file then .resx extenshion file is created Like AppResources.resx creates but the code behind like AppResource.designer.cs not creating
Things that i have tried.
I have try multiple time and clean rebuild the project.
Create new project and try to again add resource file.
use custom tool to build the resource.
To manually fix the csproj, so it generates AppResources.designer.cs from AppResources.resx, follow these steps:
Close Solution (or quit Visual Studio).
Open YourProject.csproj in any text editor.
Find all lines that refer to AppResources.designer.cs or AppResources.resx.
Add or change as needed, to be similar to this (from https://github.com/xamarin/xamarin-forms-samples/blob/main/UsingResxLocalization/UsingResxLocalization/UsingResxLocalization/UsingResxLocalization.csproj):
<ItemGroup>
<Compile Update="Resx\AppResources.Designer.cs">
<DesignTime>True</DesignTime>
<AutoGen>True</AutoGen>
<DependentUpon>AppResources.resx</DependentUpon>
</Compile>
</ItemGroup>
<ItemGroup>
<EmbeddedResource Update="Resx\AppResources.resx">
<Generator>PublicResXFileCodeGenerator</Generator>
<LastGenOutput>AppResources.Designer.cs</LastGenOutput>
</EmbeddedResource>
</ItemGroup>
Save the csproj file.
Open your solution.
In my CSPROJ I have a subfolder ›None‹. It is setup like this:
<ItemGroup Label="None">
<Compile Remove="None/**/*.cs" />
<None Include="None/**/*.cs" />
</ItemGroup>
In there I have CS files, that I don't want to compile.
No, I want to move a file (lets say ›CompileIt.cs‹ from ›None‹ back to the project, because now I want to compile it again.
If I move it outside of Visual Studio (like directly in the explorer or via PowerShell) it does exactly what I want, the file is now in a different folder inside the project and the Build-Action changes from ›None‹ to ›C# Compiler‹.
But if I move the file in Visual Studio, something different happens. Visual Studio changes the CSPROJ file like this:
<ItemGroup Label="None">
<Compile Remove="None/**/*.cs" />
<None Include="None/**/*.cs" />
</ItemGroup>
<ItemGroup>
<None Include="CompileIt.cs" />
</ItemGroup>
Now I have to either delete the ItemGroup from the CSPROJ again or change the "Build Action" in the Solution Explorer`s Properties page of the file.
Of course I know, this is usually exactly what you would expect, because normally a build action shouldn't change if you only move the file.
But anyway, is there a way to let Visual Studio know to not change CPSROJ file if I move a file inside it?
Or alternatively, is there a way to mark a subfolder in Visual Studio so that Visual Studios knows it should ignore all files in it?
PS: Oh, I forgot to say this, it is a Core-Style CSPROJ file, that means, all CS files are included automatically.
I migrated a project.json/.xproj project to the newer CS2017 .csproj format.
The project contains a T4 (.tt) template file.
It doesn't regenerate its output on save or build. The output .cs file isn't nested below the .tt file either.
Is there something I have to do to get this working?
.tt files are only auto-run by VS on save. You can install AutoT4 to have them run before/after build. (Be aware that at the moment there is a limitation with the new .csproj files - the options don't show up for them in the properties window.)
If you've converted from the old project.json/.xproj format, you may need to add the template to the project explicitly:
<ItemGroup>
<None Update="Foo.tt">
<Generator>TextTemplatingFileGenerator</Generator>
<LastGenOutput>Foo.cs</LastGenOutput>
</None>
<Compile Update="Foo.cs">
<DesignTime>True</DesignTime>
<AutoGen>True</AutoGen>
<DependentUpon>Foo.tt</DependentUpon>
</Compile>
</ItemGroup>
Related GitHub issue
Edit
As mentioned in the comments below, you can do this quickly & easily by excluding, then including the template in your project.
I realise this is 2+ years old but for those bumping into this issue years on like me, the method listed below works for me without installing anything. I had the exact same issue, after upgrading a project from Visual Studio 2010 to Visual Studio 2017. YMMV. Make a backup copy of your .csproj file before you start.
Forcing rebuild of all .tt files when you build your project can be achieved without installing anything, by editing the .csproj project file. Editing the .csproj file seems clunky, but is is the approved way https://learn.microsoft.com/en-gb/visualstudio/modeling/code-generation-in-a-build-process?view=vs-2015
Within your .csproj file, you will find lots of PropertyGroup nodes. At the end of the list of PropertyGroup nodes (position not critical), add another PropertyGroup node with this content:
<PropertyGroup>
<TransformOnBuild>true</TransformOnBuild>
<TransformOutOfDateOnly>false</TransformOutOfDateOnly>
</PropertyGroup>
Now look near the end of the .proj file, and you will see a line like this:
<Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
(For interest, on my computer with VS2017 on it that resolves to C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\MSBuild\15.0\Bin\Microsoft.CSharp.targets)
Beneath that line, add a line like this:
<Import Project="$(MSBuildExtensionsPath32)\Microsoft\VisualStudio\v15.0\TextTemplating\Microsoft.TextTemplating.targets" />
(For interest, on my computer that resolves to C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\MSBuild\Microsoft\VisualStudio\v15.0\TextTemplating\Microsoft.TextTemplating.targets)
YMMV. If yours is a web project, there is probably a line nearby that is similar but to do with Microsoft.WebApplication.targets, from which you can draw inspiration.
That, possibly with a restart of Visual Studio, should do it. If you delete the transformed file that your .tt file emits, and then do a rebuild of your project, you should see that the emitted file reappears.
Is there a nice solution to be able to automatically refresh/include externally created files in the asp.net application project?
The majority of the time I'm programming front end javascript in Sublime Text 2 editor. When integrating with the rest of the team I have to manually make sure that any new files i've created externally are included in the asp.net project.
Is there an automatic option to refresh the files in a particular folder or something?
Thanks
Figured it out!
in the proj files you can edit the itemgroup includes so rather than just including individual files you can use glob patterns. such as
app\**\*.js
<ItemGroup>
<Content Include="app\**\*.js" />
<Content Include="scripts\jquery.js" />
</ItemGroup>
Can I exclude a folder or files when I publish a web site in Visual Studio 2005? I have various resources that I want to keep at hand in the Solution Explorer, such as alternate config files for various environments, but I don't really want to publish them to the server. Is there some way to exclude them? When using other project types, such as a .dll assembly, I can set a file's Build Action property to "None" and its Copy to Output Directory property to "Do not copy". I cannot find any similar settings for files in a web site.
If the IDE does not offer this feature, does anyone have good technique for handling such files?
Exclude files and folders by adding ExcludeFilesFromDeployment and ExcludeFoldersFromDeployment elements to your project file (.csproj, .vbproj, etc). You will need to edit the file in a text editor, or in Visual Studio by unloading the project and then editing it.
Add the tags anywhere within the appropriate PropertyGroup (Debug, Release, etc) as shown below:
<PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
...
<ExcludeFilesFromDeployment>File1.aspx;Folder2\File2.aspx</ExcludeFilesFromDeployment>
<ExcludeFilesFromDeployment>**\.svn\**\*.*</ExcludeFilesFromDeployment>
<ExcludeFoldersFromDeployment>Folder1;Folder2\Folder2a</ExcludeFoldersFromDeployment>
</PropertyGroup>
Wildcards are supported.
To explain the example above:
The 1st ExcludeFilesFromDeployment excludes File1.aspx (in root of project) and Folder2\File2.aspx (Folder2 is in the root of the project)
The 2nd ExcludeFilesFromDeployment excludes all files within any folder named .svn and any of its subfolders
The ExcludeFoldersFromDeployment excludes folders named Folder1 (in root of project) and Folder2\Folder2a (Folder2 is in the root of the project)
For more info see MSDN blog post Web Deployment: Excluding Files and Folders via the Web Application’s Project File
Amazingly the answer for Visual Studio 2012 is not here:
The answer with green checkmark is not the answer.
The highest "upped" answer references an article from 2010 and says you have to edit your csproj project file which is now incorrect. I added the ExcludeFoldersFromDeployment XML element to my Visual Studio 2012 csproj file and it did nothing, the element was considered invalid, this is because ExcludeFoldersFromDeployment has been moved to the .pubxml file it looks like.
For Web Applications and Websites you edit the .pubxml file!
You can follow my answer or try this guide which I found later:
http://www.leniel.net/2014/05/using-msdeploy-publish-profile-pubxml-to-create-an-empty-folder-structure-on-iis-and-skip-deleting-it-with-msdeployskiprules.html#sthash.MSsQD8U1.dpbs
Yes, you can do this not just for Website Projects but Websites too. I spent a long time on the internet looking for this elusive exclude ability with a Visual Studio Website (NOT Website project) and had previously concluded it was not possible but it looks like it is:
In your [mypublishwebsitename].pubxml file, found in ~/Properties/PublishProfiles for Web Application Projects and ~/App_Data/PublishProfiles for Websites, simply add:
<ExcludeFilesFromDeployment>File1.aspx;Folder2\File2.aspx</ExcludeFilesFromDeployment>
<ExcludeFoldersFromDeployment>Folder1;Folder2\Folder2a</ExcludeFoldersFromDeployment>
as children to the main <PropertyGroup> element in your .pubxml file. No need to add a new element not unless you are keying a specific build type, like release or debug.
BUT WAIT!!!
If you are removing files from your destination/target server with the following setting in your Publish configuration:
Then the Web Publish process will delete on your source/target server anything excluded, like an item you have delineated in your <ExcludeFoldersFromDeployment> and <ExcludeFilesFromDeployment>!
MsDeploy Skip Rules to the rescue:
First, Web Publish uses something other than MSBuild to publish (called Task IO or something like that) but it has a bug and will not recognize skip rules, so you must add to your .pubxml:
<PropertyGroup>
<WebPublishMethod>MSDeploy</WebPublishMethod>
</PropertyGroup>
I would keep <WebPublishMethod> in its own <PropertyGroup>, you would think you could just have one <PropertyGroup> element in your .pubxml but my Skip Rules were not being called until I moved <WebPublishMethod> to its own <PropertyGroup> element. Yes, crazy, but the fact you need to do all this for Web Publish to exclude and also not delete a folder/file on your server is crazy.
Now my actual SkipRules, ExcludeFolders and ExcludeFiles declarations in my .pubxml:
<ExcludeFoldersFromDeployment>Config</ExcludeFoldersFromDeployment>
<ExcludeFoldersFromDeployment>Photos</ExcludeFoldersFromDeployment>
<ExcludeFoldersFromDeployment>Temp</ExcludeFoldersFromDeployment>
<ExcludeFilesFromDeployment>Web.config</ExcludeFilesFromDeployment>
<AfterAddIisSettingAndFileContentsToSourceManifest>AddCustomSkipRules</AfterAddIisSettingAndFileContentsToSourceManifest>
And now a the Skip Rules (<Target> is a child of <Project> in your .pubxml):
(You may be able to leave <SkipAction> empty to Skip for all actions but I didn't test that and am not sure.
<Target Name="AddCustomSkipRules">
<Message Text="Adding Custom Skip Rules" />
<ItemGroup>
<MsDeploySkipRules Include="SkipConfigFolder">
<SkipAction>Delete</SkipAction>
<ObjectName>dirPath</ObjectName>
<AbsolutePath>$(_DestinationContentPath)\\Config</AbsolutePath>
<XPath>
</XPath>
</MsDeploySkipRules>
<MsDeploySkipRules Include="SkipPhotosFolder">
<SkipAction>Delete</SkipAction>
<ObjectName>dirPath</ObjectName>
<AbsolutePath>$(_DestinationContentPath)\\Photos</AbsolutePath>
<XPath>
</XPath>
</MsDeploySkipRules>
<MsDeploySkipRules Include="SkipWebConfig">
<SkipAction>Delete</SkipAction>
<ObjectName>filePath</ObjectName>
<AbsolutePath>$(_DestinationContentPath)\\Web\.config</AbsolutePath>
<XPath>
</XPath>
</MsDeploySkipRules>
<MsDeploySkipRules Include="SkipWebConfig">
<SkipAction>Delete</SkipAction>
<ObjectName>dirPath</ObjectName>
<AbsolutePath>$(_DestinationContentPath)\\Temp</AbsolutePath>
<XPath>
</XPath>
</MsDeploySkipRules>
</ItemGroup>
</Target>
And please, do not to forget to escape the . in a filePath Skip rule with a backslash.
If you can identify the files based on extension, you can configure this using the buildproviders tag in the web.config. Add the extension and map it to the ForceCopyBuildProvider. For example, to configure .xml files to be copied with a publish action, you would do the following:
<configuration>...
<system.web>...
<compilation>...
<buildProviders>
<remove extension=".xml" />
<add extension=".xml" type="System.Web.Compilation.ForceCopyBuildProvider" />
</buildProviders>
To keep a given file from being copied, you'd do the same thing but use System.Web.Compilation.IgnoreFileBuildProvider as the type.
I struggled with the same issue and finally pulled the trigger on converting the web site to a web application. Once I did this, I got all of the IDE benefits such as build action, and it compiled faster to boot (no more validating web site...).
Step 1: Convert your 'web site' to a 'web application'. To convert it I just created a new "web application", blew away all the files it created automatically, and copied and pasted my web site in. This worked fine. Note that report files will need to have their Build Action set to "Content" instead of "none".
Step 2: Now you can set any files "Build Action" property.
Hope this helps.
In Visual Studio 2013 I found Keith's answer, adding the ExcludeFoldersFromDeployment element to the project file, didn't work (I hadn't read Brian Ogden's answer which says this). However, I found I could exclude a text file when publishing in Visual Studio 2013 by just setting the following properties on the text file itself:
1) Build Action: None
2) Copy to Output Directory: Do not copy
Initially I tried setting the Copy to Output Directory property by itself but that didn't work when the Build Action was set to the default value, Content. When I then set the Build Action to None the text file was no longer copied to the destination folder when I published.
To view these properties in the Visual Studio GUI, in the Solution Explorer right-click on the file you want to exclude and select Properties from the context menu.
I think you only have two options here:
Use the 'Exclude From Project'
feature. This isn't ideal because the
project item will be excluded from
any integrated IDE source control operations.
You would need to click the 'Show All
Files' button on the Solution window
if you need to see the files in
Solution Explorer, but that also
shows files and folders you're not
interested in.
Use a post-build event script to
remove any project items you don't
want to be published (assuming you're
publishing to a local folder then
uploading to the server).
I've been through this before and couldn't come up with anything really elegant.
For Visual Studio 2017, WebApp Publish, first create a standard file system publish profile.
Go to the App_Data\PublishProfiles\ folder and edit the [profilename].pubxml file.
Add
<ExcludeFilesFromDeployment>[file1.ext];[file2.ext];[file(n).ext]</ExcludeFilesFromDeployment>
under the tag<PropertyGroup>
You can only specify this tag once, otherwise it will only take the last one's values.
Example:
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<WebPublishMethod>FileSystem</WebPublishMethod>
<LastUsedBuildConfiguration>Release</LastUsedBuildConfiguration>
<LastUsedPlatform>Any CPU</LastUsedPlatform>
<SiteUrlToLaunchAfterPublish />
<LaunchSiteAfterPublish>True</LaunchSiteAfterPublish>
<ExcludeApp_Data>True</ExcludeApp_Data>
<publishUrl>C:\inetput\mysite</publishUrl>
<DeleteExistingFiles>False</DeleteExistingFiles>
<ExcludeFilesFromDeployment>web.config;mysite.sln;App_Code\DevClass.cs;</ExcludeFilesFromDeployment>
</PropertyGroup>
</Project>
Make sure that the tag DeleteExistingFiles is set to False
As a contemporary answer, in Visual Studio 2017 with a .net core site:
You can exclude from publish like so in the csproj, where CopyToPublishDirectory is never.
<ItemGroup>
<Content Update="appsettings.json">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</Content>
<Content Update="appsettings.Local.json">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
<CopyToPublishDirectory>Never</CopyToPublishDirectory>
</Content>
</ItemGroup>
This is discussed in more detail here: https://learn.microsoft.com/en-us/aspnet/core/host-and-deploy/visual-studio-publish-profiles?view=aspnetcore-2.2
<PropertyGroup>
<ExcludeFilesFromDeployment>appsettings.Local.json</ExcludeFilesFromDeployment>
</PropertyGroup>
The earlier suggestions did not work for me, I'm guessing because visual studio is now using a different publishing mechanism underneath, I presume via the "dotnet publish" cli tool or equivalent underneath.
The feature you are looking exists if your project is created as a "Web Application". Web Site "projects" are just a collection of files that are thought of as 1:1 with what gets deployed to a web server.
In terms of functionality both are the same, however a web application compiles all source code to a DLL, instead of the naked source code files being copied to the web server and compiled as needed.
This is just an addendum to the other helpful answers here and something I've found useful...
Using wpp.targets to excluded files and folders
When you have multiple deployments for different environments then it's helpful to have just one common file where you can set all the excluded files and folders. You can do this by creating a *.wpp.targets file in the root of the project like the example below.
For more information see this Microsoft guide:
How to: Edit Deployment Settings in Publish Profile (.pubxml) Files and the .wpp.targets File in Visual Studio Web Projects
<?xml version="1.0" encoding="utf-8" ?>
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<EnableMSDeployAppOffline>True</EnableMSDeployAppOffline>
<ExcludeFilesFromDeployment>
*.config;
*.targets;
*.default;
</ExcludeFilesFromDeployment>
<ExcludeFoldersFromDeployment>
images;
videos;
uploads;
</ExcludeFoldersFromDeployment>
</PropertyGroup>
</Project>
In Visual Studio 2017 (15.9.3 in my case) the manipulation of the .csproj-File works fine indeed! No need to modify the pubxml.
You can then construct pretty nice settings in the .csproj-File using the PropertyGroup condition, e.g.:
<PropertyGroup Condition="$(Configuration.StartsWith('Pub_'))">
<ExcludeFoldersFromDeployment>Samples</ExcludeFoldersFromDeployment>
</PropertyGroup>
excludes the "Samples" folder from all deployments with configurations starting with "Pub_"...
In Visual Studio 2022 I have successfully used this settings:
Go and edit the
[ProjectName] \ Properties \ PublishProfiles \ FolderProfile.pubxml file
in solution explorer.
Add these lines inside PropertyGroup
element:
<ItemGroup>
<Content Remove="Data\*.json" />
<None Include="Data\*.json" />
</ItemGroup>
Then save the .pubxml file and try to publish the project.
"Content Remove" will remove the file from the content to deploy.
"None Include" will keep the file in the solution explorer.
It's possible to set it up in the solution explorer for single files as well: right click the file in the solution explorer -> Properties and change the Build Action to None.