I'm using free jqgrid and implemented column chooser to show hide columns, the functionality is working as expected but the popup that shows up doesn't have a proper rendering of UI.
I tried searching a lot and went through the documentation of free jqgrid but I don't know what am I doing wrong.
I was able to reproduce the error in demo in below url.
If any one has faced similar issue please help. Note I am using bootstrap theme.
$("#sampleGrid").navButtonAdd('#sampleGridPager',{
caption: "",
title: "Choose Columns",
buttonicon: "fa fa-table",
onClickButton: function () {
$("#sampleGrid").jqGrid('columnChooser');
}
});
https://jsfiddle.net/1vk5ku2y/2/
One needs to add jQuery UI CSS to the demo because it's required for columnChooser. You should add some jQuery UI theme, which corresponds Bootsrap CSS theme. For example
https://cdnjs.cloudflare.com/ajax/libs/jqueryui/1.12.1/jquery-ui.min.css
After that one get already much better results https://jsfiddle.net/OlegKi/1vk5ku2y/4/. You need to add minor CSS fixes to have the final solution.
There is a problem when I put Kendo Dropdown List info Fancybox - Popup.
For detail:
I have page A :this page contains Kendo Dropdown list (with id = #myDropdown).
I have page B : I put my Fancybox caller here- I mean I use Fancybox to load page A (by ajax)
Everything look well , but I got a problem here:
You know, when I initialize a Dropdown List, Kendo-UI will create an "anchor" Tag for UI-effect purpose.
Ex:
DropdownList has id = #myDropdown
Kendo will create one more Tag with id = #myDropdown-list.
After closing the Fancybox-popup , The "#myDropdown" was removed from DOM, but "#myDropdown-list". It still on the DOM overtime, and it willing to be double after I call the popup again(ofcourse if dont refresh current page).
And The Kendo-DateTimePicker as the same too.
p/s: and so sorry about by english if it was too bad :D. I hope you get my question.
im going to put my "popup" in iframe.But I dont know if it is good when using iframe in this case...
Using IFrame or not is not the cause of the error. I tried with a container and without it to load the fancybox via ajax, but it didn't make a difference.
What I found is sort of a hack, however it solves the problem. Let's suppose we have a code which creates the popup and the popup's content is located in the href 'popupFrame':
$.fancybox({
'href': 'popupFrame',
'type': 'ajax',
beforeClose: removeKendoHelpers
});
The other part is the function which is called before closing the popup:
function removeKendoHelpers() {
$("#myDropdown-list").remove();
}
Of course you can create the removeKendoHelpers as an inline function and if there are more parts to remove then put that code into the removeKendoHelpers function as well.
One interesting remark: in the fancybox API onCleanup and onClosed are listed as options but they do not work, instead use beforeClose or afterClose.
UPDATE:
Actually a lot of problem is solved with calling the kendo widget's destroy() method. It solves the removing problems for the widgets except for one of the three helper divs of the DateTimePicker, so the close looks like the following:
function removeKendoHelpers() {
$("#myDropdown-list").data("kendoDropDownList").destroy();
$("#datetimepicker").data("kendoDateTimePicker").destroy();
}
And to resolve the date time picker's actual problem which is I think a bug in the kendop framework (I will report this and hopefully get some feedback) the last function only needs to be extended with:
$(".k-widget.k-calendar").remove();
OTHER solution:
This one is more crude but works like a charm for me even if the page has multiple kendo controls and even if you open another fancybox from your fancybox.
Wrap the fancybox creation in a function, like:
function openFancyBox() {
$("body").append("<div class='fancybox-marker'></div>");
$.fancybox({
'href': 'popupFrame',
'type': 'ajax',
beforeClose: removeKendoHelpers
});
}
This will create a new div at the very end of the body tag, and the function at the closing of the fancybox uses this:
function removeKendoHelpers() {
$(".fancybox-marker").last().nextAll().remove();
$(".fancybox-marker").last().remove();
}
I hope these solves all your problem!
In the new version of jQuery validation plugin 1.9 by default validation of hidden fields ignored. I'm using CKEditor for textarea input field and it hides the field and replace it with iframe. The field is there, but validation disabled for hidden fields. With validation plugin version 1.8.1 everything works as expected.
So my question is how to enable validation for hidden fields with v1.9 validation plugin.
This setting doesn't work:
$.validator.setDefaults({ ignore: '' });
The plugin's author says you should use "square brackets without the quotes", []
http://bassistance.de/2011/10/07/release-validation-plugin-1-9-0/
Release: Validation Plugin 1.9.0:
"...Another change should make the setup of forms with hidden elements
easier, these are now ignored by default (option “ignore” has
“:hidden” now as default). In theory, this could break an existing
setup. In the unlikely case that it actually does, you can fix it by
setting the ignore-option to “[]” (square brackets without the
quotes)."
To change this setting for all forms:
$.validator.setDefaults({
ignore: [],
// any other default options and/or rules
});
(It is not required that .setDefaults() be within the document.ready function)
OR for one specific form:
$(document).ready(function() {
$('#myform').validate({
ignore: [],
// any other options and/or rules
});
});
EDIT:
See this answer for how to enable validation on some hidden fields but still ignore others.
EDIT 2:
Before leaving comments that "this does not work", keep in mind that the OP is simply asking about the jQuery Validate plugin and his question has nothing to do with how ASP.NET, MVC, or any other Microsoft framework can alter this plugin's normal expected behavior. If you're using a Microsoft framework, the default functioning of the jQuery Validate plugin is over-written by Microsoft's unobtrusive-validation plugin.
If you're struggling with the unobtrusive-validation plugin, then please refer to this answer instead: https://stackoverflow.com/a/11053251/594235
This worked for me, within an ASP.NET MVC3 site where I'd left the framework to setup unobtrusive validation etc., in case it's useful to anyone:
$("form").data("validator").settings.ignore = "";
Make sure to put
$.validator.setDefaults({ ignore: '' });
NOT inside $(document).ready
So I'm going to go a bit deeper in to why this doesn't work because I'm the kind of person that can't sleep at night without knowing haha. I'm using jQuery validate 1.10 and Microsoft jQuery Unobtrusive Validation 2.0.20710.0 which was published on 1/29/2013.
I started by searching for the setDefaults method in jQuery Validate and found it on line 261 of the unminified file. All this function really does is merge your json settings in to the existing $.validator.defaults which are initialized with the ignore property being set to ":hidden" along with the other defaults defined in jQuery Validate. So at this point we've overridden ignore. Now let's see where this defaults property is being referenced at.
When I traced through the code to see where $.validator.defaults is being referenced. I noticed that is was only being used by the constructor for a form validator, line 170 in jQuery validate unminified file.
// constructor for validator
$.validator = function( options, form ) {
this.settings = $.extend( true, {}, $.validator.defaults, options );
this.currentForm = form;
this.init();
};
At this point a validator will merge any default settings that were set and attach it to the form validator. When you look at the code that is doing the validating, highlighting, unhighlighting, etc they all use the validator.settings object to pull the ignore property. So we need to make sure if we are to set the ignore with the setDefaults method then it has to occur before the $("form").validate() is called.
If you're using Asp.net MVC and the unobtrusive plugin, then you'll realize after looking at the javascript that validate is called in document.ready. I've also called my setDefaults in the document.ready block which is going to execute after the scripts, jquery validate and unobtrusive because I've defined those scripts in the html before the one that has the call in it. So my call obviously had no impact on the default functionality of skipping hidden elements during validation. There is a couple of options here.
Option 1 - You could as Juan Mellado pointed out have the call outside of the document.ready which would execute as soon as the script has been loaded. I'm not sure about the timing of this since browsers are now capable of doing parallel script loading. If I'm just being over cautious then please correct me. Also, there's probably ways around this but for my needs I did not go down this path.
Option 2a - The safe bet in my eyes is to just replace the $.validator.setDefaults({ ignore: '' }); inside of the document.ready event with $("form").data("validator").settings.ignore = "";. This will modify the ignore property that is actually used by jQuery validate when doing each validation on your elements for the given form.
Options 2b - After looking in to the code a bit more you could also use $("form").validate().settings.ignore = ""; as a way of setting the ignore property. The reason is that when looking at the validate function it checks to see if a validator object has already been stored for the form element via the $.data() function. If it finds a validator object stored with the form element then it just returns the validator object instead of creating another one.
This worked for me within an ASP.NET site.
To enable validation on some hidden fields use this code
$("form").data("validator").settings.ignore = ":hidden:not(#myitem)";
To enable validation for all elements of form use this one
$("form").data("validator").settings.ignore = "";
Note that use them within $(document).ready(function() { })
Just added ignore: [] in the specific page for the specific form, this solution worked for me.
$("#form_name").validate({
ignore: [],
onkeyup: false,
rules: {
},
highlight:false,
});
This is working for me.
jQuery("#form_name").validate().settings.ignore = "";
The validation was working for me on form submission, but it wasn't doing the reactive event driven validation on input to the chosen select lists.
To fix this I added the following to manually trigger the jquery validation event that gets added by the library:
$(".chosen-select").each(function() {
$(this).chosen().on("change", function() {
$(this).parents(".form-group").find("select.form-control").trigger("focusout.validate");
});
});
jquery.validate will now add the .valid class to the underlying select list.
Caveat: This does require a consistent html pattern for your form inputs. In my case, each input filed is wrapped in a div.form-group, and each input has .form-control.
Just find the text ignore: ":hidden" in your jquery validation file and comment it.
After comment this it will never loss any hidden elements to validate...
Thanks
I have a web form which is split up into several HTML pages.
I am using the validation plug-in to check fields on submit and this is working great.
The spec says that users should be able to navigate through the form, both linearly (just using the submit buttons to go from page to page) and also to skip to any particular page.
I have a unordered list with the links at the top of each page. I'm looking to fire the validation both on submit and when one of these links is clicked but don't know if this is possible.
For info, I'm currently firing the validation this way:
$("form#courseDetails").validate({
rules: {
studiedBefore: "required" //Have you studied with us before
},
messages: {
studiedBefore: "Please indicate whether you have studied with us before."
}
});
Each form has an ID and validation for all the forms is in one JS file.
Not that it really matters, but the navigation is in <ul id="tabNav">
Any help much appreciated.
Thanks,
Phil
Check the .valid() method it provides. If you call that in click handlers attached to your links, you should be ok.
I have noticed a strange jQuery Validation plugin behaviour, possible a bug (tested with the latest version at http://dev.jquery.com/view/trunk/plugins/validate/jquery.validate.js).
Suppose I have several forms on a page.
This code leads to only first form to be validated:
$(document).ready(function() {
$("form").validate();
});
But this one attaches data validator to all forms:
$(document).ready(function() {
$("form").each(function() {
$(this).validate();
});
});
Is it by design? Why can't I handle all forms at once?
The api for validate does state that it "Validates the selected form" (not forms), but I agree that that's not very jQueryish. Maybe you should suggest it as an enhancement, I can't imagine that breaking any old code?