NSScrollView inside another NSScrollView - cocoa

I have a NSScrollview nested inside another NSScrollview. How do i make the inner view handle horizontal scrolling only? Vertical scrolling should move the outer view.
Currently i pass the scrollWheel: event to the outer view from the inner view, but it is very slow.

I also had the problem of nested scroll views. The inner scroll view should scroll horizontally, and the outer should scroll vertically.
When handling scroll events from magic mouse / trackpad, it is important to pick only one of the scroll views for each gesture, otherwise you will see odd jerking when your fingers don't move perfectly straight. You should also ensure that tapping the trackpad with two fingers shows both scrollers.
When handling legacy scroll events from mighty mouse or mice with old fashioned scroll wheels, you must pick the right scroll view for each event, because there is no gesture phase information in the events.
This is my subclass for the inner scroll view, tested only in Mountain Lion:
#interface PGEHorizontalScrollView : NSScrollView {
BOOL currentScrollIsHorizontal;
}
#end
#implementation PGEHorizontalScrollView
-(void)scrollWheel:(NSEvent *)theEvent {
/* Ensure that both scrollbars are flashed when the user taps trackpad with two fingers */
if (theEvent.phase==NSEventPhaseMayBegin) {
[super scrollWheel:theEvent];
[[self nextResponder] scrollWheel:theEvent];
return;
}
/* Check the scroll direction only at the beginning of a gesture for modern scrolling devices */
/* Check every event for legacy scrolling devices */
if (theEvent.phase == NSEventPhaseBegan || (theEvent.phase==NSEventPhaseNone && theEvent.momentumPhase==NSEventPhaseNone)) {
currentScrollIsHorizontal = fabs(theEvent.scrollingDeltaX) > fabs(theEvent.scrollingDeltaY);
}
if ( currentScrollIsHorizontal ) {
[super scrollWheel:theEvent];
} else {
[[self nextResponder] scrollWheel:theEvent];
}
}
#end
My implementation does not always forward Gesture cancel events correctly, but at least in 10.8 this does not cause problems.

This is my subclass of NSScrollView that does what you are asking. Since it is merely passing the events it doesn't care about up the responder chain it should be as performant as if it weren't a subclass (or at least close)
h file
#import <Cocoa/Cocoa.h>
#interface HorizontalScrollView : NSScrollView
#end
and m
#implementation HorizontalScrollView
- (void)scrollWheel:(NSEvent *)theEvent {
NSLog(#"%#", theEvent);
if(theEvent.deltaX !=0)
[super scrollWheel:theEvent];
else
[[self nextResponder] scrollWheel:theEvent];
}
#end

Swift 4.
Answer is a translation of Jakob's excellent answer above, with the addition of a direction flag.
As mentioned in the comments on his answer, there can be subtle complications if this isn't done right. When simply forwarding all scrollWheel() calls to the next responder, I was seeing issues with NSTrackingAreas not being updated correctly and tooltips and cursor styles over NSTextView views being misaligned.
class ECGuidedScrollView: NSScrollView
{
enum ScrollDirection {
case vertical
case horizontal
}
private var currentScrollMatches: Bool = false
private var scrollDirection: ScrollDirection
init(withDirection direction: ScrollDirection) {
scrollDirection = direction
super.init(frame: NSRect.zero)
}
required init?(coder: NSCoder) {
fatalError("init(coder:) has not been implemented")
}
override func scrollWheel(with event: NSEvent)
{
// Ensure that both scrollbars are flashed when the user taps trackpad with two fingers
if event.phase == .mayBegin {
super.scrollWheel(with: event)
nextResponder?.scrollWheel(with: event)
return
}
/*
Check the scroll direction only at the beginning of a gesture for modern scrolling devices
Check every event for legacy scrolling devices
*/
if event.phase == .began || (event.phase == [] && event.momentumPhase == [])
{
switch scrollDirection {
case .vertical:
currentScrollMatches = fabs(event.scrollingDeltaY) > fabs(event.scrollingDeltaX)
case .horizontal:
currentScrollMatches = fabs(event.scrollingDeltaX) > fabs(event.scrollingDeltaY)
}
}
if currentScrollMatches {
super.scrollWheel(with: event)
} else {
self.nextResponder?.scrollWheel(with: event)
}
}
}

Related

Check if a NSView is visible in its NSWindow

How can I know if my NSView is visible within its NSWindow?
It needs to account for scrolling superviews.
It does not need to know if the NSWindow is visible to the user.
Accounting for overlapping views would be "nice to have" but not required.
This should do it.
#interface NSView (Visibility)
- (BOOL)visibleInWindow;
#end
#implementation NSView (Visibility)
- (BOOL)visibleInWindow
{
if (self.window == nil) {
return NO;
}
// Might have zero opacity.
if (self.alphaValue == 0 || self.hiddenOrHasHiddenAncestor) {
return NO;
}
// Might be clipped by an ancestor.
return !NSIsEmptyRect(self.visibleRect);
}
#end
Note: Overlapping views are not accounted for.

Nested NSScrollViews that can be scrolled with different gestures?

I've got an app with an NSScrollView nested inside another NSScrollView. I'd like the user to be able to scroll the inner scrollview using two-finger swipe, and to scroll the outer scrollview using three fingers.
I imagine I'll need to somehow configure each scrollview to reject touches with the wrong numbers of fingers, but I'm not sure how to do this.
I figured it out! The trick is to subclass the inner ScrollView and force it to reject gestures that have a certain number of touches, forwarding them to the parent scrollview:
- (void)scrollWheel:(NSEvent *)event {
if (_forwardScrollToParent) {
// [self.enclosingScrollView scrollWheel:event];
} else {
[super scrollWheel:event];
[self recordInteractionWithThisTab];
}
}
- (void)touchesBeganWithEvent:(NSEvent *)event {
[super touchesBeganWithEvent:event];
NSInteger nTouches = [event touchesMatchingPhase:NSTouchPhaseTouching inView:self].count;
if (nTouches == 3) {
_forwardScrollToParent = YES;
} else {
_forwardScrollToParent = NO;
}
}

How to collapse an NSSplitView pane with animation while using Auto Layout?

I've tried everything I can think of, including all the suggestions I've found here on SO and on other mailing lists, but I cannot figure out how to programmatically collapse an NSSplitView pane with an animation while Auto Layout is on.
Here's what I have right now (written in Swift for fun), but it falls down in multiple ways:
#IBAction func toggleSourceList(sender: AnyObject?) {
let isOpen = !splitView.isSubviewCollapsed(sourceList.view.superview!)
let position = (isOpen ? 0 : self.lastWidth)
if isOpen {
self.lastWidth = sourceList.view.frame.size.width
}
NSAnimationContext.runAnimationGroup({ context in
context.allowsImplicitAnimation = true
context.timingFunction = CAMediaTimingFunction(name: kCAMediaTimingFunctionEaseIn)
context.duration = self.duration
self.splitView.setPosition(position, ofDividerAtIndex: 0)
}, completionHandler: { () -> Void in
})
}
The desired behavior and appearance is that of Mail.app, which animates really nicely.
I have a full example app available at https://github.com/mdiep/NSSplitViewTest.
Objective-C:
[[splitViewItem animator] setCollapse:YES]
Swift:
splitViewItem.animator().collapsed = true
From Apple’s help:
Whether or not the child ViewController corresponding to the
SplitViewItem is collapsed in the SplitViewController. The default is
NO. This can be set with the animator proxy to animate the collapse or
uncollapse. The exact animation used can be customized by setting it
in the -animations dictionary with a key of "collapsed". If this is
set to YES before it is added to the SplitViewController, it will be
initially collapsed and the SplitViewController will not cause the
view to be loaded until it is uncollapsed. This is KVC/KVO compliant
and will be updated if the value changes from user interaction.
I was eventually able to figure this out with some help. I've transformed my test project into a reusable NSSplitView subclass: https://github.com/mdiep/MDPSplitView
For some reason none of the methods of animating frames worked for my scrollview. I didn't try animating the constraints though.
I ended up creating a custom animation to animate the divider position. If anyone is interested, here is my solution:
Animation .h:
#interface MySplitViewAnimation : NSAnimation <NSAnimationDelegate>
#property (nonatomic, strong) NSSplitView* splitView;
#property (nonatomic) NSInteger dividerIndex;
#property (nonatomic) float startPosition;
#property (nonatomic) float endPosition;
#property (nonatomic, strong) void (^completionBlock)();
- (instancetype)initWithSplitView:(NSSplitView*)splitView
dividerAtIndex:(NSInteger)dividerIndex
from:(float)startPosition
to:(float)endPosition
completionBlock:(void (^)())completionBlock;
#end
Animation .m
#implementation MySplitViewAnimation
- (instancetype)initWithSplitView:(NSSplitView*)splitView
dividerAtIndex:(NSInteger)dividerIndex
from:(float)startPosition
to:(float)endPosition
completionBlock:(void (^)())completionBlock;
{
if (self = [super init]) {
self.splitView = splitView;
self.dividerIndex = dividerIndex;
self.startPosition = startPosition;
self.endPosition = endPosition;
self.completionBlock = completionBlock;
[self setDuration:0.333333];
[self setAnimationBlockingMode:NSAnimationNonblocking];
[self setAnimationCurve:NSAnimationEaseIn];
[self setFrameRate:30.0];
[self setDelegate:self];
}
return self;
}
- (void)setCurrentProgress:(NSAnimationProgress)progress
{
[super setCurrentProgress:progress];
float newPosition = self.startPosition + ((self.endPosition - self.startPosition) * progress);
[self.splitView setPosition:newPosition
ofDividerAtIndex:self.dividerIndex];
if (progress == 1.0) {
self.completionBlock();
}
}
#end
I'm using it like this - I have a 3 pane splitter view, and am moving the right pane in/out by a fixed amount (235).
- (IBAction)togglePropertiesPane:(id)sender
{
if (self.rightPane.isHidden) {
self.rightPane.hidden = NO;
[[[MySplitViewAnimation alloc] initWithSplitView:_splitView
dividerAtIndex:1
from:_splitView.frame.size.width
to:_splitView.frame.size.width - 235
completionBlock:^{
;
}] startAnimation];
}
else {
[[[MySplitViewAnimation alloc] initWithSplitView:_splitView
dividerAtIndex:1
from:_splitView.frame.size.width - 235
to:_splitView.frame.size.width
completionBlock:^{
self.rightPane.hidden = YES;
}] startAnimation];
}
}
/// Collapse the sidebar
func collapsePanel(_ number: Int = 0){
guard number < self.splitViewItems.count else {
return
}
let panel = self.splitViewItems[number]
if panel.isCollapsed {
panel.animator().isCollapsed = false
} else {
panel.animator().isCollapsed = true
}
}
I will also add, because it took me quite a while to figure this out, that setting collapseBehavior = .useConstraints on your NSSplitViewItem (or items) may help immensely if you have lots of constraints defining the layouts of your subviews. My split view animations didn't look right until I did this. YMMV.
If you're using Auto-Layout and you want to animate some aspect of the view's dimensions/position, you might have more luck animating the constraints themselves. I've had a quick go with an NSSplitView but have so far only met with limited success. I can get a split to expand and collapse following a button push, but I've ended up having to try to hack my way around loads of other problems caused by interfering with the constraints. In case your unfamiliar with it, here's a simple constraint animation:
- (IBAction)animate:(NSButton *)sender {
/* Shrink view to invisible */
NSLayoutConstraint *constraint = self.viewWidthConstraint;
[NSAnimationContext runAnimationGroup:^(NSAnimationContext *context) {
[[NSAnimationContext currentContext] setDuration:0.33];
[[NSAnimationContext currentContext] setTimingFunction:[CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionDefault]];
[[constraint animator] setConstant:0];
} completionHandler:^{
/* Do Some clean-up, if required */
}];
Bear in mind you can only animate a constraints constant, you can't animate its priority.
NSSplitViewItem (i.e. arranged subview of NSSplitView) can be fully collapsed, if it can reach Zero dimension (width or height). So, we just need to deactivate appropriate constrains before animation and allow view to reach Zero dimension. After animation we can activate needed constraints again.
See my comment for SO question How to expand and collapse NSSplitView subviews with animation?.
This is a solution that doesn't require any subclasses or categories, works without NSSplitViewController (which requires macOS 10.10+), supports auto layout, animates the views, and works on macOS 10.8+.
As others have suggested, the solution is to use an NSAnimationContext, but the trick is to set context.allowsImplicitAnimation = YES (Apple docs). Then just set the divider position as one would normally.
#import <Quartz/Quartz.h>
#import <QuartzCore/QuartzCore.h>
- (IBAction)toggleLeftPane:(id)sender
{
[NSAnimationContext runAnimationGroup:^(NSAnimationContext * _Nonnull context) {
context.allowsImplicitAnimation = YES;
context.duration = 0.25; // seconds
context.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseOut];
if ([self.splitView isSubviewCollapsed:self.leftPane]) {
// -> expand
[self.splitView setPosition:self.leftPane.frame.size.width ofDividerAtIndex:0];
} else {
// <- collapse
_lastLeftPaneWidth = self.leftPane.frame.size.width;
// optional: remember current width to restore to same size
[self.splitView setPosition:0 ofDividerAtIndex:0];
}
[self.splitView layoutSubtreeIfNeeded];
}];
}
Use auto layout to constrain the subviews (width, min/max sizes, etc.). Make sure to check "Core Animation Layer" in Interface Builder (i.e. set views to be layer backed) for the split view and all subviews — this is required for the transitions to be animated. (It will still work, but without animation.)
A full working project is available here: https://github.com/demitri/SplitViewAutoLayout.

Mac Cocoa: How to differentiate if a NSScrollWheel event is from a mouse or trackpad?

In my application, I want the scrolling to happen, only with scroll wheel action from a mouse and not from the two finger gesture on a trackpad. Basically, I am trying to determine if the scrollWheelEvent is generated from the mouse or trackpad, inside - (void)scrollWheel:(NSEvent *)theEvent method. From what I know so far, it seems like there is no straightforward way to accomplish this.
I tried a work around of setting a boolean variable to true and false inside -(void)beginGestureWithEvent:(NSEvent *)event; and -(void)endGestureWithEvent:(NSEvent *)event; But this is not a solution because the scrollWheel: method is getting called several times, after the endGestureWithEvent: method is called.
Here is my code:
$BOOL fromTrackPad = NO;
-(void)beginGestureWithEvent:(NSEvent *)event;
{
fromTrackPad = YES;
}
-(void) endGestureWithEvent:(NSEvent *)event;
{
fromTrackPad = NO;
}
- (void)scrollWheel:(NSEvent *)theEvent
{
if(!fromTrackPad)
{
//then do scrolling
}
else
{
//then don't scroll
}
}
I know this is something that is not standard, but this is my requirement. Does anyone know a way to do this?? Thanks!
-[NSEvent momentumPhase] is the solution. So, the events generated from the trackpad between the beginGesture and endGesture events returns a value other than NSEventPhaseNone for -[NSEvent phase] and the trackpad events that are generated after the endGesture event returns a value other than NSEventPhaseNone for -[NSEvent momentumPhase]. The code is below,
- (void)scrollWheel:(NSEvent *)theEvent
{
if(([theEvent momentumPhase] != NSEventPhaseNone) || [theEvent phase] != NSEventPhaseNone))
{
//theEvent is from trackpad
}
else
{
//theEvent is from mouse
}
}
You can use [event hasPreciseScrollingDeltas] to differentiate. It was added in OS X Lion. It differentiates between line scroll (mouse wheels) and pixel scroll (trackpads, magic mouse) events.
My answer in Swift, but for Objective C logic is the same:
override func scrollWheel(with event: NSEvent) {
if event.subtype == .mouseEvent {
// mouse
} else {
// trackpad
}
}
The answer given by #AProgrammer maybe not available. Because scrollwheel event generated by magic mouse has phase values of: began, changed and ended.
And scrollwheel event generated by mighty mouse has value of none for both phase and momentumphase.
So the method can only distinguish mighty mouse from magic mouse and trackpad.

iOS - forward all touches through a view

I have a view overlayed on top of many other views. I am only using the overaly to detect some number of touches on the screen, but other than that I don't want the view to stop the behavior of other views underneath, which are scrollviews, etc. How can I forward all the touches through this overlay view? It is a subclass of UIView.
Disabling user interaction was all I needed!
Objective-C:
myWebView.userInteractionEnabled = NO;
Swift:
myWebView.isUserInteractionEnabled = false
For passing touches from an overlay view to the views underneath, implement the following method in the UIView:
Objective-C:
- (BOOL)pointInside:(CGPoint)point withEvent:(UIEvent *)event {
NSLog(#"Passing all touches to the next view (if any), in the view stack.");
return NO;
}
Swift 5:
override func point(inside point: CGPoint, with event: UIEvent?) -> Bool {
print("Passing all touches to the next view (if any), in the view stack.")
return false
}
This is an old thread, but it came up on a search, so I thought I'd add my 2c. I have a covering UIView with subviews, and only want to intercept the touches that hit one of the subviews, so I modified PixelCloudSt's answer to:
-(BOOL)pointInside:(CGPoint)point withEvent:(UIEvent *)event
{
for (UIView* subview in self.subviews ) {
if ( [subview hitTest:[self convertPoint:point toView:subview] withEvent:event] != nil ) {
return YES;
}
}
return NO;
}
Improved version of #fresidue answer. You can use this UIView subclass as transparent view passing touches outside its subview. Implementation in Objective-C:
#interface PassthroughView : UIView
#end
#implementation PassthroughView
- (BOOL)pointInside:(CGPoint)point withEvent:(UIEvent *)event
{
for (UIView *view in self.subviews) {
if (!view.hidden && [view pointInside:[self convertPoint:point toView:view] withEvent:event]) {
return YES;
}
}
return NO;
}
#end
.
and in Swift:
class PassthroughView: UIView {
override func point(inside point: CGPoint, with event: UIEvent?) -> Bool {
return subviews.contains(where: {
!$0.isHidden
&& $0.isUserInteractionEnabled
&& $0.point(inside: self.convert(point, to: $0), with: event)
})
}
}
TIP:
Say then you have a large "holder" panel, perhaps with a table view behind. You make the "holder" panel PassthroughView. It will now work, you can scroll the table "through" the "holder".
But!
On top of the "holder" panel you have some labels or icons. Don't forget, of course those must simply be marked user interaction enabled OFF!
On top of the "holder" panel you have some buttons. Don't forget, of course those must simply be marked user interaction enabled ON!
Note that somewhat confusingly, the "holder" itself - the view you use PassthroughView on - must be marked user interaction enabled ON! That's ON!! (Otherwise, the code in PassthroughView simply will never be called.)
I needed to pass touches through a UIStackView. A UIView inside was transparent, but the UIStackView consumed all touches. This worked for me:
class PassThrouStackView: UIStackView {
override func hitTest(_ point: CGPoint, with event: UIEvent?) -> UIView? {
let view = super.hitTest(point, with: event)
if view == self {
return nil
}
return view
}
}
All arrangedSubviews still receive touches, but touches on the UIStackView itself went through to the view below (for me a mapView).
I had a similar issue with a UIStackView (but could be any other view).
My configuration was the following:
It's a classical case where I have a container that needed to be placed in the background, with buttons on the side. For layout purposes, I included the buttons in a UIStackView, but now the middle (empty) part of the stackView intercepts touches :-(
What I did is create a subclass of UIStackView with a property defining the subView that should be touchable.
Now, any touch on the side buttons (included in the * viewsWithActiveTouch* array) will be given to the buttons, while any touch on the stackview anywhere else than these views won't be intercepted, and therefore passed to whatever is below the stack view.
/** Subclass of UIStackView that does not accept touches, except for specific subviews given in the viewsWithActiveTouch array */
class NoTouchStackView: UIStackView {
var viewsWithActiveTouch: [UIView]?
override func hitTest(point: CGPoint, withEvent event: UIEvent?) -> UIView? {
if let activeViews = viewsWithActiveTouch {
for view in activeViews {
if CGRectContainsPoint(view.frame, point) {
return view
}
}
}
return nil
}
}
If the view you want to forward the touches to doesn't happen to be a subview / superview, you can set up a custom property in your UIView subclass like so:
#interface SomeViewSubclass : UIView {
id forwardableTouchee;
}
#property (retain) id forwardableTouchee;
Make sure to synthesize it in your .m:
#synthesize forwardableTouchee;
And then include the following in any of your UIResponder methods such as:
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
[self.forwardableTouchee touchesBegan:touches withEvent:event];
}
Wherever you instantiate your UIView, set the forwardableTouchee property to whatever view you'd like the events to be forwarded to:
SomeViewSubclass *view = [[[SomeViewSubclass alloc] initWithFrame:someRect] autorelease];
view.forwardableTouchee = someOtherView;
In Swift 5
class ThroughView: UIView {
override func point(inside point: CGPoint, with event: UIEvent?) -> Bool {
guard let slideView = subviews.first else {
return false
}
return slideView.hitTest(convert(point, to: slideView), with: event) != nil
}
}
Looks like even thou its quite a lot of answers here, there is no one clean in swift that I needed.
So I took answer from #fresidue here and converted it to swift as it's what now mostly developers want to use here.
It solved my problem where I have some transparent toolbar with button but I want toolbar to be invisible to user and touch events should go through.
isUserInteractionEnabled = false as some stated is not an option based on my testing.
override func point(inside point: CGPoint, with event: UIEvent?) -> Bool {
for subview in subviews {
if subview.hitTest(convert(point, to: subview), with: event) != nil {
return true
}
}
return false
}
I had couple of labels inside StackView and I didn't have much success with the solutions above, instead I solved my problem using below code:
let item = ResponsiveLabel()
// Configure label
stackView.addArrangedSubview(item)
Subclassing UIStackView:
class PassThrouStackView:UIStackView{
override func hitTest(_ point: CGPoint, with event: UIEvent?) -> UIView? {
for subview in self.arrangedSubviews {
let convertedPoint = convert(point, to: subview)
let labelPoint = subview.point(inside: convertedPoint, with: event)
if (labelPoint){
return subview
}
}
return nil
}
}
Then you could do something like:
class ResponsiveLabel:UILabel{
override func touchesBegan(_ touches: Set<UITouch>, with event: UIEvent?) {
// Respond to touch
}
}
Try something like this...
for (UIView *view in subviews)
[view touchesBegan:touches withEvent:event];
The code above, in your touchesBegan method for example would pass the touches to all of the subviews of view.
The situation I was trying to do was build a control panel using controls inside nested UIStackView’s. Some of the controls had UITextField’s others with UIButton’s. Also, there were labels to identify the controls. What I wanted to do was put a big “invisible” button behind the control panel so that if a user tapped on an area outside a button or text field, that I could then catch that and take action - primarily dismiss any keyboard if a text field was active (resignFirstResponder). However, tapping on a label or other blank area in the control panel would not pass things through. The above discussions were helpful in coming up with my answer below.
Basically, I sub-classed UIStackView and overwrote the “point(inside:with) routine to look for the type of controls that needed the touch and “ignore” things like labels that I wanted to ignore. It also checks for inside UIStackView’s so that things can recurse into the control panel structure.
The code is a perhaps a little more verbose than it should be. But it was helpful in debugging and hopefully provides more clarity in what the routine is doing. Just be sure in Interface Builder to change the class of the UIStackView's to PassThruStack.
class PassThruStack: UIStackView {
override func point(inside point: CGPoint, with event: UIEvent?) -> Bool {
for view in self.subviews {
if !view.isHidden {
let isStack = view is UIStackView
let isButton = view is UIButton
let isText = view is UITextField
if isStack || isButton || isText {
let pointInside = view.point(inside: self.convert(point, to: view), with: event)
if pointInside {
return true
}
}
}
}
return false
}
}
As suggested by #PixelCloudStv if you want to throw touched from one view to another but with some additional control over this process - subclass UIView
//header
#interface TouchView : UIView
#property (assign, nonatomic) CGRect activeRect;
#end
//implementation
#import "TouchView.h"
#implementation TouchView
#pragma mark - Ovverride
- (BOOL)pointInside:(CGPoint)point withEvent:(UIEvent *)event
{
BOOL moveTouch = YES;
if (CGRectContainsPoint(self.activeRect, point)) {
moveTouch = NO;
}
return moveTouch;
}
#end
After in interfaceBuilder just set class of View to TouchView and set active rect with your rect. Also u can change and implement other logic.

Resources