I have:
Visual Studio 2010 Premium Version 10.0.40219.1 SP1Rel
Resharper 6.1
One other minor Extension I got off of Extension Manager
The team is using Team Foundation Server 2010.
I haven't been able to figure exactly what things triggers this, but I constantly have to re-set my solution Startup Project configuration. I think it's whenever I restart my computer and after some "Get Latest" retrievals. Here's a screenshot of the source directory structure in Source Control Explorer (not Solution Explorer):
Any ideas why I would have to re-set those properties sometimes?
This setting 'lives' in the *.suo file. It is certainly wrong to insert this file into Source Control. In the picture you 're providing, there doesn't seem to exist one - but keep in mind that's a hidden file: so it makes sense to check if you actually have one checked in along with your other sources.If yes, it absolutely makes sense that this gets changed with every GetLatest & you should probably remove it from your repository.If not, having this issue only makes sense when you map your source every time in a clean folder like #leppie says.Check also here & here for similar posts.
EDIT
OP commented below that his *.suo file was in fact not checked in - so the above passage is not really helpful. Another SO post seems to have been the case instead. Following the instructions there, OP got his issue resolved.
Related
I am getting an inconsistent error with Visual Studio 2015 that is severely hampering my productivity.
I am working on a very large application that I have pulled down from TFS. Sometimes when working I will try and save the file that I was working on, and have the asterix not go away and the file not save. This is despite running the application in Administrator.
Sometimes the solution is simply to rebuild the project and then try to save, however when this doesn't work I need close down visual studio and start up again, losing all my saves anyways.
This isn't too bad when I am working on .net files because the problem happens a lot less, and the solution is almost always to just rebuild, which is much better than having to re boot vs. However recently I have been working on javascript files within visual studio, and with them I get about one save, then the problems comes up, and rebuilding doesn't fix issue, causing me to have to reboot visual studio every save I make...
I have tried searching online for people who have faced a similar issue, or asked around my work, and no one seems to have ever had a similar problem. So hopefully, for my sanity's sake, someone knows what the heck is going on with my visual studio. Thanks!
I am currently running VS2019 16.7.2 and sometimes it just refuses to save no matter what I do. I try Ctrl + S, File -> "Save all", closing the window (which causes the changes to be lost) but nothing works.
Though for some reason when first I press the File -> "Save ... as" option in the menu and then cancel it, that releases the "save lock" and suddenly I am able to save again. Not really a satisfactory solution but at least all changes aren't lost. Maybe it will work on other versions as well?
I will give an answer to a problem which might not be exactly the same as the one reported by the author, but it is fairly close, and people searching for a solution to this problem are likely to arrive to this question.
In my case, in my entire solution containing thousands of files, there was only one particular file that Visual Studio was consistently failing to save when needed. As a result, after each commit, the "Git Changes" tab would not appear completely empty. All files would be committed, except this one file, which would appear as still uncommitted. So, I would have to manually save it and then amend the last commit in order to arrive at a completely empty "Git Changes" tab.
I thought that the problem might be due to some discrepancy between the letter case of the filename on disk (which is what the "Git Changes" view reports) and the letter case of the filename in the visual studio project file (which is what the "Solution Explorer" view reports) but it turns out that this was not it.
After much troubleshooting, I discovered that the following sequence of magical incantations solves the problem, I have no idea why:
In "Solution Explorer" locate the problematic file.
Rename the problematic file to something else.
Commit (with amend if you wish) the file.
Rename the file back to its original name.
Commit (with amend) the file again.
Restart Visual Studio.
The last step of restarting Visual studio is not strictly speaking necessary, but it is useful in case you have a letter case mismatch, because Visual Studio seems to be somehow caching filenames, (or at any rate not detecting that the capitalization of a filename has changed,) and restarting it makes it come to its senses.
I realize this is an old question but I had a similar problem with a solution file I had upgraded from Visual Studio 2015 to Visual Studio 2022. I was unable to save any changes to the solution, although the file was writable in notepad.
Deleting the section in the solution file as suggested by Richard Stanton's workaround fixed it for me!
developercommunity.visualstudio.com Workaround
Delete the following section from the solution file:
ProjectSection(FolderStartupServices) = postProject
{B4F97281-0DBD-4835-9ED8-7DFB966E87FF} = {B4F97281-0DBD-4835-9ED8-7DFB966E87FF}
EndProjectSection
We have recently upgraded an MFC solution from Visual Studio 2005 to Visual Studio 2013 (Update 4), at last. I think the solution originates in Visual Studio 6 and was upgraded to VS2003, then VS2005. It is a Multibyte (i.e. non Unicode) solution.
We haven't had many problems, so far. In fact it seemed like we had sorted pretty much everything out.
One of the errors we were getting was in the rc file, where the compiler said it couldn't find "l.esp\afxres.rc". Upon investigating the issue, we found that in VS2013 (I guess 2012 and 2010 too) the path is "l.esn\afxres.rc" so we changed it, and it all worked fine again.
Now, after "finishing" the port, we've continued the development, and we've found that, every time we make a change to the resources (add new controls, change the properties of existing ones) the path returns to the old one ("l.esp\afxres.rc"). It changes it when saving the resource file (make change, click save, it's already changed).
I guess there is some property, or something, that it's still telling the IDE it is a Visual Studio 2005 project, but I can't find it. I've tried removing the UpgradeFromVC71 property page, but to no avail.
Any ideas?
Ok, I've found it! Leaving an answer for future reference.
It's in the Resource include files. Go to Resource View, right click on the .rc file and select "Rsource Include Files". There are the offending includes. Change the path, and done!
https://support.microsoft.com/en-us/kb/198536 (old, but good enough)
Visual Studio's Go To Definition is disabled and F12 doesn't work. Other commands like Alt-F12 may continue working.
Close the solution.
Delete the intellisense database file for the solution: [solution].ncb or [solution].suo
Reopen the solution.
Optional: Rebuild the solution.
Note that this can also be as a result of disabling database for C++/C#.
In Tools - Options, type "IntelliSense" into the search box, and click on C/C++ - Advanced. In the Browsing/Navigation section, change Disable Database to False, if it is not so already.
After re-enabling, close and reopen to force rebuild.
NOTE: IntelliSense will produce large files on disk (*.sdf and ipch) that should be excluded from Git, for example.
I know the solution has been resolved. However, I encountered the exact same problem. I searched internet. None of the trick works including this one.
Eventually, I figured out. I right clicked on the file that had the problem. I included the file in the project. Isn't that obvious. Actually not, the file has been included for a week. I have been working on that file more than 7 hours a day for the whole week. Up till yesterday 6:20 pm.
Oh, I could not compile correctly this morning. There were tons of syntax error message yesterday. This morning, I was able to compile. Strange. right? Then my go to definition was gone.
Took me a while to find out cs and designer.cs were certainly excluded, but aspx file was.
I solved the problem. Did my figure slip? I don't know.
That is one thing people check. Either yourself, someone else, or system accidentally exclude the cs files without the knowledge. I know it is strange, but it solved the problem. There are weird scenarios in Visual studio. People can present 200 solutions. They work for 99% of time, but not our cases. I just bring one more scenario
I encountered this in Visual Studio 2010.
For me, this solution did the trick
Close all the files.
Reopen the files.
and you are good to go.
This also happens, if Visual Studio has files opened, which are not in the current Solution.
I don't know how I got to this state, where files of a different solution where open as I didn't open them manually, but a quick check of the file path showed that those weren't files of the opened solution.
Therefore, "Go to Definition" was disabled.
I found that I had to remove my TFS mapping:
VS 2010 > open Team Explorer > Drill into the team project > double click source control > right click on the team project in the left pane and do "Remove Mapping" > after everything was removed I manually went to the local folder and deleted any lingering files > back in source control explorer I re-mapped to the same local folder and re-pulled all the code. Now the "go to definition" works again.
Not sure why I had to do this...
Check dll in references which is yellow. Remove it and add again.
I've just had this happen with a CMake-based C++ project in Visual Studio 2019. Everything was fine yesterday, then when I opened it up today all the Go To Definition/Declaration etc options were greyed out everywhere in every file in the project, even for things defined within the same file (and the syntax highlighting didn't look right either). It did work if I opened one of the .cpp files separately on its own (without loading the Project/Solution).
I tried various things including the answers here and telling it to generate the CMake cache again, but what finally fixed it was actually deleting the CMake cache. The Delete Cache option didn't seem to work (all the files were still there on disk, and there was some sort of failure message in the Output window) so I just deleted the entire "out" directory from the project directory (well, moved it somewhere outside of the project, just in case). Loaded up Visual Studio again, it rebuilt the cache again automatically and IntelliSense immediately started working again! I just had to wait 5 minutes for it to compile everything again when I wanted to run the project.
Maybe it wasn't necessary to remove the entire "out" directory, but when I clicked "Open in Explorer" under the "CMake Cache" menu it opened the actual build directory (which was the only thing in the "out" directory anyway) so I assumed the entire thing was related to the cache and was getting too fed up with it to try to narrow it down further. It's probably only certain files within that directory really.
Tried all the above solutions in my VS2019, nothing worked for me. Than I've noticed an update sign on the bottom Right corner. After updating the VS all options were restored.
Simple just check your bottom left corner of Visual Studio if Restricted turn it as a trusted and your problem will solve.
In my case due to my project is mapped with TFS so I am unable to go to definition also my project files showing read only when opening from Solution. So I have move to my root folder mapped with TFS and then right-clicked on folder > Go to properties > Attributes section was Read-Only I have unchecked it and clicked Apply. Reopen visual studio. Everything is now working fine.
I faced the same Issue in my Visual Studio 2019 version.I followed the below Steps:
Go to references folder in the solution.
Click on Manage Nuget packages.
Click on Browse.
Search for 'Microsoft.Net.Compilers'.
Click on Update.
This Worked for me.
In my case, another Visual Stuidio was opened (not closed succsessfully). Close all examples of VS, then re open solution.
Just open the Solution using Windows Explorer, instead of opening it from inside VS...
Recently I was trying to load a solution source controlled by TFS but some projects in that solution were not being loaded in solution explorer inside visual studio. After spending hours of my time, for temporary reason when I deleted the whole "Global Section" at the end of .sln (solution file) by manually editing it in a notepad and restarted Visual Studio, all projects appeared as expected. I am using VS 2008. It hasn't shown any odd behavior yet, but couldn't understand the reason.
Does "Global Section" in solution file play and important role? Any harm in removing global section?
Well, you just deleted any source control bindings, plus build configuration and some solution-specific settings.
VS should revert to defaults if it doesn't find the section, though I suppose it would have been better if you knew just what was causing the issue. If the problem was with TFS then maybe resetting that fixed the problem.
As to harm, again, if VS is able to cope with the removal of the section and can revert to defaults then I see no harm. Of course you might lose configuration information, which will have to be re-applied.
Is there a way to tell Visual Studio 2005 to just ignore source control binding when opening a solution? I sometimes need to load a solution for which I don't have access to the source control server, but Visual Studio insists on trying to connect anyway, meaning I have to click "temporarily work offline in disconnected mode" for every project in the solution (of which there are about 20) as it loads. For some reason, it also tries to check each project out immediately after I've told it to work offline, so I have to click past that dialog box too.
As I will never need to edit anything in this solution, is there any way I can open it and have Visual Studio just ignore the fact it has source control bindings in it?
Edit: Ideally, I'd like a way to do this without having to change the project/solution files. They change fairly frequently, so I'd have to redo any changes every time there was a new version (otherwise I'd just unbind them once and it wouldn't be a problem).
Thanks for the replies so far.
The source control bindings are stored in Visual Studio solution file (.sln). For TFS for example, it contains a global section for TFS information and the solution projects added to TFS. You can edit the solution file to remove these bindings manually. I would suggest making a copy of the solution file first. However, I would recommend removing bindins via Visual Studio. Open your solution and go through the offline scenario. Then go to File/Source Control/Change Source Control (VS 2008) to bring up the UI that shows you the source control bindings in your solution. There you can manage the bindings including unbinding them. Once unbound, the next time you open the solution, VS should not have a need to access the source control.
I've been looking for a way to disable Integration between SourceSafe 2005 and Visual Studio 2008. We are forced to use SourceSafe being in a corporate environment and all. SourceSafe is fine on its own if you treat it like a baby. As soon as you try to do anything approaching useful it starts to break. God forbid you try to use the integration with Visual Studio. Being that I didn't want the "Bindings removed" so that it doesn't confuse other devs on the team I needed to be able to tell Studio to ignore the solution and project bindings and continue on it's merry way.
I followed the registry hack suggested in the following post
Removing SourceSafe Integration from Visual Studio 6
Studio did what I wanted...sort of. It removed the SourceSafe integration. However when I opened up a source controlled solution it asked me if I wanted to remove the bindings.
"the projects will be treated as not under source control"
No I don't want you to remove the bindings from the files, I want you to IGNORE them. This dialog pops up every time you open the solution/project file and there is no way around it.
My solution at the moment seems to have worked...for now.
File->Source Control->Change Source Control...->Disconnect
I hope this helps anyone else in the position of having to use SourceSafe but can't remove the bindings from the files themselves. WHY, Microsoft, WHY would you put the bindings in the files themselves?
/rant