I am an embedded engineer and I have never worked with neither windows nor visual basic.
For my current task I have to maintain and improve a test system running on Windows, written in Visual Studio, C#(also have no experience with) .
This project uses some libraries written in visual basic(all legacy code). And I detect a problem in there. I cannot copy the code directly in here but because of legal bindings but it is something like that:
'getter()
dim temp as byte = global_data
Array.reverse(temp);
...
This is a getter function. Since there is a reverse inside, the return of this function is different after each call because when temp changed, global_data is also changed. And I can get the real value only after odd number of calls. Previous handler told me to call function only once or three times... I think this is stupid and changed it by adding a .clone() like this:
dim temp as byte = global_data.clone()
Array.reverse(temp);
And it worked :)
There are a lot of functions like this so I'm gonna make similar adjustments to them too.
But since I am not familiar with the dynamics of this system, I am afraid to face with a problem later. For example can making multiple number of clones consume my RAM? Can those clones be destroyesd? If yes, do I have to destroy them? How?
Or are there any other possible problems?
And is there an other way to do this?
Thanks in advance!
To answer your question, no there is nothing wrong with calling Clone multiple times.
The cloned byte arrays will take up memory as long as they are referenced, but that isn't unique to the byte array being cloned. Presumably that cloned byte array is being passed to other methods. Once those methods are executed the array will be eligible for garbage collection, and the system will take care of it. If this code runs very very frequently, there might be better approaches that are more efficient than allocating and eventual garbage collection of those arrays, but you won't "break" anything using the Clone over an over.
For variables of basic type, clone method copies its value, which requires the stack to allocate space for it.
Value type allocates memory in the stack. They have their own life cycle, so they are automatically allocated and released without management. So you do not have to worry about taking a lot of memory, calling it many times will not cause trouble.
I've got a relatively fast SproutCore app that I'm trying to make just a tad bit faster.
Right now, when the user scrolls my SC.ListView and they scroll into view some list items that have not been loaded from the server (say from a relationship), the app automatically makes a call to the server to load these records. Even though this is fast, there is still a short period of time where my list items are blank.
I know that I can make them say "Loading..." or something like that (and I have), but I was wondering: is there was a way to pre-load my "off-screen" records so that as the user scrolls, the list items are already loaded?
My ListItemViews will be fairly large (pixel-wise), so even loading double the amount of data is not going to be killer from an AJAX perspective, and it would be nice if as the user scrolled, the content was always loaded (unless they scroll SUPER-SUPER-fast, in which case I'm okay with them seeing a loading indicator).
I currently found a solution by adding the following to my SC.ListView, but I've noticed some major performance issues on mobile and they are directly related to making this change, so I was wondering if there was a better way.
contentIndexesInRect: function(rect) {
rect.height = rect.height * 2;
return sc_super();
}
Overriding contentIndexesInRect is the way I would do this. I would do less than double it though – I might get the result from sc_super() and then add a few extra items to the resulting index set. (I believe it comes back frozen, so you may have to clone-edit-freeze.) One or two extra may give you enough breathing room to get the stuff loaded, without contributing nearly as much to the apparent performance issue.
I'm surprised that it results in major performance issues though. It sounds to me like your list items themselves may be heavier-weight than they need to be – for example, they may have a lot of bindings to hook and unhook. If that's what's going on, you may benefit more from improving their efficiency.
I think you would be better served to load the additional data outside of the context of what the list is actually displaying. For instance, forcing more list items to render in order to trigger additional requests does result in having the extra data available, but also adds several unnecessary elements to the DOM, which is actually detrimental to overall performance. In fact these extra elements are most likely the cause of the major slowdown on mobile once you get to a sufficient number of extras.
Instead, I would first ensure that your list item views are properly pooling so that only the visible items are updating in place with as little DOM manipulation as possible. Then second, I would lazily load in additional data only after the required data is requested. There are quite a few ways to do this depending on your setup. You might want to add some logic to a data source to trigger an additional request on each filled request range or you might want to do something like override itemViewForContentIndex in SC.CollectionView as the point to trigger the extra data. In either case, I imagine it could look something like this,
// …
prefetchTriggered: function (lastIndex) {
// A query that will fetch more data (this depends totally on your setup).
var query = SC.Query.remote(MyApp.Record, {
// Parameters to pass to the data source so it knows what to request.
lastIndex: lastIndex
});
// Run the query.
MyApp.store.find(query);
},
// …
As I mention in the comments above, the structure of the request depends totally on your setup and your API so you'll have to modify it to meet your needs. It will work better if you are able to request a suitable range of items, rather than one-at-a-time.
I've seen a few mentions of this on Stack Overflow, but staring at Wikipedia (the relevant page has since been deleted) and at an MFC dynamic dialog demo did nothing to enlighten me. Can someone please explain this? Learning a fundamentally different concept sounds nice.
Based on the answers: I think I'm getting a better feel for it. I guess I just didn't look at the source code carefully enough the first time. I have mixed feelings about differential execution at this point. On the one hand, it can make certain tasks considerably easier. On the other hand, getting it up and running (that is, setting it up in your language of choice) is not easy (I'm sure it would be if I understood it better)...though I guess the toolbox for it need only be made once, then expanded as necessary. I think in order to really understand it, I'll probably need to try implementing it in another language.
Gee, Brian, I wish I had seen your question sooner. Since it's pretty much my
"invention" (for better or worse), I might be able to help.
Inserted: The shortest possible
explanation I can make is that if
normal execution is like throwing a
ball in the air and catching it, then
differential execution is like
juggling.
#windfinder's explanation is different from mine, and that's OK. This technique is not easy to wrap one's head around, and it's taken me some 20 years (off and on) to find explanations that work. Let me give it another shot here:
What is it?
We all understand the simple idea of a computer stepping along through a program, taking conditional branches based on the input data, and doing things. (Assume we are dealing only with simple structured goto-less, return-less code.) That code contains sequences of statements, basic structured conditionals, simple loops, and subroutine calls. (Forget about functions returning values for now.)
Now imagine two computers executing that same code in lock-step with each other, and able to compare notes. Computer 1 runs with input data A, and Computer 2 runs with input data B. They run step-by-step side by side. If they come to a conditional statement like IF(test) .... ENDIF, and if they have a difference of opinion on whether the test is true, then the one who says the test if false skips to the ENDIF and waits around for its sister to catch up. (This is why the code is structured, so we know the sister will eventually get to the ENDIF.)
Since the two computers can talk to each other, they can compare notes and give a detailed explanation of how the two sets of input data, and execution histories, are different.
Of course, in differential execution (DE) it is done with one computer, simulating two.
NOW, suppose you only have one set of input data, but you want to see how it has changed from time 1 to time 2. Suppose the program you're executing is a serializer/deserializer. As you execute, you both serialize (write out) the current data and deserialize (read in) the past data (which was written the last time you did this). Now you can easily see what the differences are between what the data was last time, and what it is this time.
The file you are writing to, and the old file you are reading from, taken together constitute a queue or FIFO (first-in-first-out), but that's not a very deep concept.
What is it good for?
It occurred to me while I was working on a graphics project, where the user could construct little display-processor routines called "symbols" that could be assembled into larger routines to paint things like diagrams of pipes, tanks, valves, stuff like that. We wanted to have the diagrams be "dynamic" in the sense that they could incrementally update themselves without having to redraw the entire diagram. (The hardware was slow by today's standards.) I realized that (for example) a routine to draw a bar of a bar-chart could remember its old height and just incrementally update itself.
This sounds like OOP, doesn't it? However, rather than "make" an "object", I could take advantage of the predictability of the execution sequence of the diagram procedure. I could write the bar's height in a sequential byte-stream. Then to update the image, I could just run the procedure in a mode where it sequentially reads its old parameters while it writes the new parameters so as to be ready for the next update pass.
This seems stupidly obvious and would seem to break as soon as the procedure contains a conditional, because then the new stream and the old stream would get out of sync. But then it dawned on me that if they also serialized the boolean value of the conditional test, they could get back in sync.
It took a while to convince myself, and then to prove, that this would always work, provided a simple rule (the "erase mode rule") is followed.
The net result is that the user could design these "dynamic symbols" and assemble them into larger diagrams, without ever having to worry about how they would dynamically update, no matter how complex or structurally variable the display would be.
In those days, I did have to worry about interference between visual objects, so that erasing one would not damage others. However, now I use the technique with Windows controls, and I let Windows take care of rendering issues.
So what does it achieve? It means I can build a dialog by writing a procedure to paint the controls, and I do not have to worry about actually remembering the control objects or dealing with incrementally updating them, or making them appear/disappear/move as conditions warrant. The result is much smaller and simpler dialog source code, by about an order of magnitude, and things like dynamic layout or altering the number of controls or having arrays or grids of controls are trivial. In addition, a control such as an Edit field can be trivially bound to the application data it is editing, and it will always be provably correct, and I never have to deal with its events. Putting in an edit field for an application string variable is a one-line edit.
Why is it hard to understand?
What I have found hardest to explain is that it requires thinking differently about software. Programmers are so firmly wedded to the object-action view of software that they want to know what are the objects, what are the classes, how do they "build" the display, and how do they handle the events, that it takes a cherry bomb to blast them out of it. What I try to convey is that what really matters is what do you need to say? Imagine you are building a domain-specific language (DSL) where all you need to do is tell it "I want to edit variable A here, variable B there, and variable C down there" and it would magically take care of it for you. For example, in Win32 there is this "resource language" for defining dialogs. It is a perfectly good DSL, except it doesn't go far enough. It doesn't "live in" the main procedural language, or handle events for you, or contain loops/conditionals/subroutines. But it means well, and Dynamic Dialogs tries to finish the job.
So, the different mode of thinking is: to write a program, you first find (or invent) an appropriate DSL, and code as much of your program in that as possible. Let it deal with all the objects and actions that only exist for implementation's sake.
If you want to really understand differential execution and use it, there are a couple of tricky issues that can trip you up. I once coded it in Lisp macros, where these tricky bits could be handled for you, but in "normal" languages it requires some programmer discipline to avoid the pitfalls.
Sorry to be so long-winded. If I haven't made sense, I'd appreciate it if you'd point it out and I can try and fix it.
Added:
In Java Swing, there is an example program called TextInputDemo. It is a static dialog, taking 270 lines (not counting the list of 50 states). In Dynamic Dialogs (in MFC) it is about 60 lines:
#define NSTATE (sizeof(states)/sizeof(states[0]))
CString sStreet;
CString sCity;
int iState;
CString sZip;
CString sWholeAddress;
void SetAddress(){
CString sTemp = states[iState];
int len = sTemp.GetLength();
sWholeAddress.Format("%s\r\n%s %s %s", sStreet, sCity, sTemp.Mid(len-3, 2), sZip);
}
void ClearAddress(){
sWholeAddress = sStreet = sCity = sZip = "";
}
void CDDDemoDlg::deContentsTextInputDemo(){
int gy0 = P(gy);
P(www = Width()*2/3);
deStartHorizontal();
deStatic(100, 20, "Street Address:");
deEdit(www - 100, 20, &sStreet);
deEndHorizontal(20);
deStartHorizontal();
deStatic(100, 20, "City:");
deEdit(www - 100, 20, &sCity);
deEndHorizontal(20);
deStartHorizontal();
deStatic(100, 20, "State:");
deStatic(www - 100 - 20 - 20, 20, states[iState]);
if (deButton(20, 20, "<")){
iState = (iState+NSTATE - 1) % NSTATE;
DD_THROW;
}
if (deButton(20, 20, ">")){
iState = (iState+NSTATE + 1) % NSTATE;
DD_THROW;
}
deEndHorizontal(20);
deStartHorizontal();
deStatic(100, 20, "Zip:");
deEdit(www - 100, 20, &sZip);
deEndHorizontal(20);
deStartHorizontal();
P(gx += 100);
if (deButton((www-100)/2, 20, "Set Address")){
SetAddress();
DD_THROW;
}
if (deButton((www-100)/2, 20, "Clear Address")){
ClearAddress();
DD_THROW;
}
deEndHorizontal(20);
P((gx = www, gy = gy0));
deStatic(P(Width() - gx), 20*5, (sWholeAddress != "" ? sWholeAddress : "No address set."));
}
Added:
Here's example code to edit an array of hospital patients in about 40 lines of code. Lines 1-6 define the "database". Lines 10-23 define the overall contents of the UI. Lines 30-48 define the controls for editing a single patient's record. Note the form of the program takes almost no notice of events in time, as if all it had to do was create the display once. Then, if subjects are added or removed or other structural changes take place, it is simply re-executed, as if it were being re-created from scratch, except that DE causes incremental update to take place instead. The advantage is that you the programmer do not have to give any attention or write any code to make the incremental updates of the UI happen, and they are guaranteed correct. It might seem that this re-execution would be a performance problem, but it is not, since updating controls that do not need to be changed takes on the order of tens of nanoseconds.
1 class Patient {public:
2 String name;
3 double age;
4 bool smoker; // smoker only relevant if age >= 50
5 };
6 vector< Patient* > patients;
10 void deContents(){ int i;
11 // First, have a label
12 deLabel(200, 20, “Patient name, age, smoker:”);
13 // For each patient, have a row of controls
14 FOR(i=0, i<patients.Count(), i++)
15 deEditOnePatient( P( patients[i] ) );
16 END
17 // Have a button to add a patient
18 if (deButton(50, 20, “Add”)){
19 // When the button is clicked add the patient
20 patients.Add(new Patient);
21 DD_THROW;
22 }
23 }
30 void deEditOnePatient(Patient* p){
31 // Determine field widths
32 int w = (Width()-50)/3;
33 // Controls are laid out horizontally
34 deStartHorizontal();
35 // Have a button to remove this patient
36 if (deButton(50, 20, “Remove”)){
37 patients.Remove(p);
37 DD_THROW;
39 }
40 // Edit fields for name and age
41 deEdit(w, 20, P(&p->name));
42 deEdit(w, 20, P(&p->age));
43 // If age >= 50 have a checkbox for smoker boolean
44 IF(p->age >= 50)
45 deCheckBox(w, 20, “Smoker?”, P(&p->smoker));
46 END
47 deEndHorizontal(20);
48 }
Added: Brian asked a good question, and I thought the answer belonged in the main text here:
#Mike: I'm not clear on what the "if (deButton(50, 20, “Add”)){" statement is actually doing. What does the deButton function do? Also, are your FOR/END loops using some sort of macro or something? – Brian.
#Brian: Yes, the FOR/END and IF statements are macros. The SourceForge project has a complete implementation. deButton maintains a button control. When any user input action takes place, the code is run in "control event" mode, in which deButton detects that it was pressed and signifies that it was pressed by returning TRUE. Thus, the "if(deButton(...)){... action code ...} is a way of attaching action code to the button, without having to create a closure or write an event handler. The DD_THROW is a way of terminating the pass when the action is taken because the action may have modified application data, so it is invalid to continue the "control event" pass through the routine. If you compare this to writing event handlers, it saves you writing those, and it lets you have any number of controls.
Added: Sorry, I should explain what I mean by the word "maintains". When the procedure is first executed (in SHOW mode), deButton creates a button control and remembers its id in the FIFO. On subsequent passes (in UPDATE mode), deButton gets the id from the FIFO, modifies it if necessary, and puts it back in the FIFO. In ERASE mode, it reads it from the FIFO, destroys it, and does not put it back, thereby "garbage collecting" it. So the deButton call manages the entire lifetime of the control, keeping it in agreement with application data, which is why I say it "maintains" it.
The fourth mode is EVENT (or CONTROL). When the user types a character or clicks a button, that event is caught and recorded, and then the deContents procedure is executed in EVENT mode. deButton gets the id of its button control from the FIFO and askes if this is the control that was clicked. If it was, it returns TRUE so the action code can be executed. If not, it just returns FALSE. On the other hand, deEdit(..., &myStringVar) detects if the event was meant for it, and if so passes it to the edit control, and then copies the contents of the edit control to myStringVar. Between this and normal UPDATE processing, myStringVar always equals the contents of the edit control. That is how "binding" is done. The same idea applies to scroll bars, list boxes, combo boxes, any kind of control that lets you edit application data.
Here's a link to my Wikipedia edit: http://en.wikipedia.org/wiki/User:MikeDunlavey/Difex_Article
Differential execution is a strategy for changing the flow of your code based on external events. This is usually done by manipulating a data structure of some kind to chronicle the changes. This is mostly used in graphical user interfaces, but is also used for things like serialization, where you are merging changes into an existing "state."
The basic flow is as follows:
Start loop:
for each element in the datastructure:
if element has changed from oldDatastructure:
copy element from datastructure to oldDatastructure
execute corresponding subroutine (display the new button in your GUI, for example)
End loop:
Allow the states of the datastructure to change (such as having the user do some input in the GUI)
The advantages of this are a few. One, it is separation
of the execution of your changes, and the actual
manipulation of the supporting data. Which is nice for
multiple processors. Two, it provides a low bandwidth method
of communicating changes in your program.
Think of how a monitor works:
It is updated at 60 Hz -- 60 times a second. Flicker flicker flicker 60 times, but your eyes are slow and can't really tell. The monitor shows whatever is in the output buffer; it just drags this data out every 1/60th of a second no matter what you do.
Now why would you want your program to update the whole buffer 60 times a second if the image shouldn't change that often? What if you only change one pixel of the image, should you rewrite the entire buffer?
This is an abstraction of the basic idea: you want to change the output buffer based on what information you want displayed on the screen. You want to save as much CPU time and buffer write time as possible, so you don't edit parts of the buffer that need not be changed for the next screen pull.
The monitor is separate from your computer and logic (programs). It reads from the output buffer at whatever rate it updates the screen. We want our computer to stop synchronizing and redrawing unnecessarily. We can solve this by changing how we work with the buffer, which can be done in a variety of ways. His technique implements a FIFO queue that is on delay -- it holds what we just sent to the buffer. The delayed FIFO queue does not hold pixel data, it holds "shape primitives" (which might be pixels in your application, but it could also be lines, rectangles, easy-to-draw things because they are just shapes, no unnecessary data is allowed).
So you want to draw/erase things from the screen? No problem. Based on the contents of the FIFO queue I know what the monitor looks like at the moment. I compare my desired output (to erase or draw new primitives) with the FIFO queue and only change values that need to be changed/updated. This is the step which gives it the name Differential Evaluation.
Two distinct ways in which I appreciate this:
The First:
Mike Dunlavey uses a conditional-statement extension. The FIFO queue contains a lot of information (the "previous state" or the current stuff on monitor or time-based polling device). All you have to add to this is the state you want to appear on screen next.
A conditional bit is added to every slot that can hold a primitive in the FIFO queue.
0 means erase
1 means draw
However, we have previous state:
Was 0, now 0: don't do anything;
Was 0, now 1: add it to the buffer (draw it);
Was 1, now 1: don't do anything;
Was 1, now 0: erase it from the buffer (erase it from the screen);
This is elegant, because when you update something you really only need to know what primitives you want to draw to the screen -- this comparison will find out if it should erase a primitive or add/keep it to/in the buffer.
The Second:
This is just one example, and I think that what Mike is really getting at is something that should be fundamental in design for all projects: Reduce the (computational) complexity of design by writing your most computationally intense operations as computerbrain-food or as close as you can get. Respect the natural timing of devices.
A redraw method to draw the entire screen is incredibly costly, and there are other applications where this insight is incredibly valuable.
We are never "moving" objects around the screen. "Moving" is a costly operation if we are going to mimic the physical action of "moving" when we design code for something like a computer monitor. Instead, objects basically just flicker on and off with the monitor. Every time an object moves, it's now a new set of primitives and the old set of primitives flickers off.
Every time the monitor pulls from the buffer we have entries that look like
Draw bit primitive_description
0 Rect(0,0,5,5);
1 Circ(0,0,2);
1 Line(0,1,2,5);
Never does an object interact with the screen (or time-sensitive polling device). We can handle it more intelligently than an object will when it greedily asks to update the whole screen just to show a change specific to only itself.
Say we have a list of all possible graphical primitives our program is capable of generating, and that we tie each primitive to a set of conditional statements
if (iWantGreenCircle && iWantBigCircle && iWantOutlineOnMyCircle) ...
Of course, this is an abstraction and, really, the set of conditionals that represents a particular primitive being on/off could be large (perhaps hundreds of flags that must all evaluate to true).
If we run the program, we can draw to the screen at essentially the same rate at which we can evaluate all these conditionals. (Worst case: how long it takes to evaluate the largest set of conditional statements.)
Now, for any state in the program, we can simply evaluate all the conditionals and output to the screen lightning-quick! (We know our shape primitives and their dependent if-statements.)
This would be like buying a graphically-intense game. Only instead of installing it to your HDD and running it through your processor, you buy a brand-new board that holds the entirety of the game and takes as input: mouse, keyboard, and takes as output: monitor. Incredibly condensed conditional evaluation (as the most fundamental form of a conditional is logic gates on circuit boards). This would, naturally, be very responsive, but it offers almost no support in fixing bugs, as the whole board design changes when you make a tiny design change (because the "design" is so far-removed from the nature of the circuit board). At the expense of flexibility and clarity in how we represent data internally we have gained significant "responsiveness" because we are no longer doing "thinking" in the computer; it is all just reflex for the circuit board based on the inputs.
The lesson, as I understand it, is to divide labor such that you give each part of the system (not necessarily just computer and monitor) something it can do well. The "computer thinking" can be done in terms of concepts like objects... The computer brain will gladly try and think this all through for you, but you can simplify the task a great deal if you are able to let the computer think in terms of data_update and conditional_evals. Our human abstractions of concepts into code are idealistic, and in the case of internal program draw methods a little overly idealistic. When all you want is a result (array of pixels with correct color values) and you have a machine that can easily spit out an array that big every 1/60th of a second, try and eliminate as much flowery thinking from the computer brain as possible so that you can focus on what you really want: to synchronize your graphical updates with your (fast) inputs and the natural behavior of the monitor.
How does this map to other applications?
I'd like to hear of other examples, but I'm sure there are many. I think anything that provides a real-time "window" into the state of your information (variable state or something like a database... a monitor is just a window into your display buffer) can benefit from these insights.
I find this concept very similar to the state machines of classic digital electronics. Specially the ones which remember their previous output.
A machine whose next output depends on current input and previous output according to (YOUR CODE HERE). This current input is nothing but previous output + (USER, INTERACT HERE).
Fill up a surface with such machines, and it will be user interactive and at the same time represent a layer of changeable data. But at this stage it will still be dumb, just reflecting user interaction to underlying data.
Next, interconnect the machines on your surface, let them share notes, according to (YOUR CODE HERE), and now we make it intelligent. It will become an interactive computing system.
So you just have to provide your logic at two places in the above model; the rest is taken care of by the machine design itself. That's what good about it.