I am experiencing this weird problem with Visual Studio 2022.
I created the skeleton of a new web application using individual accounts.
I have run the first migration, created some default accounts in the aspnet identity tables and
finally launched the application to test if everything was correctly setup in my PC.
Visual Studio compiles the application without problems and launch the defaul browser (Edge).
The standard Welcome page appears but immediately Visual Studio pops to the front doing nothing.
No errors, no messages nothing wrong. Just the code window here to obscure the browser window.
Now, I switch to the browser window and click on the Login link.
Again, the login window briefly appears in the browser but it is immediately obscured by Visual Studio.
Switch again to the browser, compile the required fields and click on login.
Again Visual Studio thinks that he is the best app on the planet and brings itself on the foregroud.
I have tried to switch to another browser, but the results are the same.
I have tried with an existing application written with Visual Studio 2019, but again the "pop in front of everything" still happens.
I have tried to search for this problem but probably I haven't find the right keywords to represent this problem correctly to a search engine.
I think that probably I have something wrong in the Visual Studio configuration, but it is practically impossible to find something there if you don't know what to look for.
The only option that seems to be related is "Bring Visual Studio to the foreqround when breaking in the debugger" but even after uncheking the option the "pop to front" persists.
So my question is simple. Has anyone experienced a similar behavior? If yes how have you fixed it?
Well, probably this situation is so messed that none will ever see this post.
Nevertheless I would like to share how I have finally resolved the question and leave here a warning for future readers.
The cause of Visual Studio 2022 hiccups is, probably, the import of Visual Studio 2019 settings.
I thought that it was a good idea to set 2022 with the same options used in the last 3 years so, after installing VS 2022
I used this very useful menu (Tools->Import Export Settings) to export all the Visual Studio 2019 Settings in an XML file and I reimported it in 2022.
I thought, if the file is not compatible with VS2022 surely it will abort the import. Right?
No, Visual Studio 2022 doesn't complain during the import of 2019 settings.
But something in that exported file should be very broken.
I have resolved the problem with these steps
Close Visual Studio 2022
Open a command prompt window with administrator rights
Change to the install folder for Visual Studio 2022 and then change dir to subfolder "Common7\IDE"
Finally execute the command
devenv /ResetSettings
After this everything started to work as expected without problems.
I have saved the broken VS2019 setting file and tried to compare it with one produced after the reset,
but they have too many differences to extract something useful to identify the specific problem area
What's the reason for error message "The snapshot is out of date and cannot be used anymore because type tree has been updated, A new snapshow needs to be acquired"?
This error appeared right after I launched VS2010 and added username/pwd to connect to TFS repository.
I am using VS 2010 professional edition.
It happened to me with VS2012 as well after loading the project without source control binding, a local simple WinForms project. All I needed to do was Clean & Rebuild. After that the problem was solved.
This is a bug in Visual Studio. According to http://connect.microsoft.com/VisualStudio/feedback/details/742959/the-snapshot-is-out-of-date "We've taken a closer look at this problem and it isn't one that we'll be able to solve in the next release of Visual Studio."
They recommend waiting around until the background language parser service is done (or, in other words, don't try to be too productive there partner.) My experience is that closing all documents, cleaning the solution, rebuilding it and then closing and re-opening with a pause after does remove the error.
Until you do something silly, like edit code. Then all bets are off again as to when it reoccurs.
I had a similar issue with VS2012 and after rebuilding the solution twice, I still saw the same error message.
Following an advice from a post from this site, I closed the Designer tab, reopened it from the Solution Explorer, and the problem was resolved.
I got this error too, but after I unload project and reload project, the problem was resolved.
Simply restarting Visual Studio 2012 was a workaround for me, but it kept happening about every hour and having to restart visual studio that often was very annoying.
I also found this post which suggests that the Productivity Power Tools are the problem and to simply turn off the Automatic Brace Completion in Tools->Options->Productivity Power Tools. Since making this change I haven't seen the error message again :)
I'll note though that I am using Visual Studio 2012 and the OP is using Visual Studio 2010, but the Productivity Power Tools are available for VS 2010 too, so this may still fix the problem in VS 2010.
The same issue persists in VS2013, but no amount of Clean/Rebuild or restarting VS will help. The only way I can do a successful publish, is to disable the AutoT4MVC extension.
I got this error too. I closed Visual Studio 2012 and opened it again and the error was gone.
I got this error when I had conflicting class names / namespaces. I was referencing a UserControl from a different DLL in my XAML file which had the same name as my XAML file (class name). Maybe this helps.
I used Visual Studio 2012, and just faced this error on my Windows 8. It seems like Turning off the VM and restarting Visual Studio fixed the issue.
I just got this with VS2010.
I had a form with a user control (UCa) with a user control (UCa) from a different project on it. Made a change to the UCb then flicked to the designer for the form and boom! Snapshot error.
Resolved by a full clean and then rebuilding just the UCb project before building the rest of the project.
I'm using Visual Studio 2012, and I got this error when starting Visual Studio, letting TFS connect to the server, and THEN opening my solution. The fix was simply closing VS and launching the solution directly.
I'll throw my two cents in here as well.
I've tried every combination of Clean, Rebuild, Restart, etc. What I've found is that restarting Visual Studio usually makes the problem go away for at least one Publish. Here's the weird part, though. You can also fix the problem by doing absolutely nothing. If you just let Visual Studio sit for about a minute or two, and then publish, it will usually work just fine. There's some background voodoo going on here, and waiting for it to finish seems to do the trick.
I have a solution with two parts that need published. One is a WCF service application, and the other is the ASP.NET MVC5 website itself. Anytime I publish the services, and then try to publish the site I'll see this error. I can publish the services, restart VS, and then publish the site, OR I can publish the services, go get a drink, and then publish the site. As long as I give VS a chance to "settle" between any kind of rebuild and the publishing of the site, everything seems to work as expected.
Take a walk, come back, problem solved. OR if you don't have the time. Clean, Rebuild, Restart, Publish (lather, rinse, repeat).
I am having an issue with my context menu in Visual Studio 2010 that is driving me nuts. I think it started when I installed the Code Snippet Designer Extent ion but I am not 100% sure about that. I didn't notice it until after I uninstalled that extension with a few others.
I have tried reinstalling and then uninstalling the extension again but that didn't work either. I am left with these extensions on my machine DevExpress Tools, Dpack, PowerCommands for VS, Productivity Power Tools and the VS10x Code Marker.
I have another system that has all the same extensions installed but doesn't have the context menu problem and I never loaded the Snippet Designer on that machine, which is why I think the problem was caused by something in that particular extension.
Here is what it looks like.
http://www.mydatafish.com/contextmenu.png I tried to post a picture but I need more points to do so and it is hard to explain without a picture so please take a look at the link.
Anybody have any ideas of how I can remove these phantom mene items? By the way I did try resetting the context mene through the the customize menu item in the Tools menu.
OK I am not sure how it got in the condition that it was but I found the program that was causing the problem. It was something called "Code Helper" and it was an add it that I used with VS 2005. It was listed as a AddIn for Visual Studio 2010 but wasn't inside the Addin directory for 2010.
To get rid of the problem I removed the program from the Programs and Features (Add/Remove).
I'm used to using Idle for Python development, but decided to give Visual Studio 2010 + IronPython a try last week. It seems to work fine, but I noticed that triple-quoted (multi-line) strings don't highlight correctly in the editor. See photo:
Does anyone else have this problem or know of a good fix? Apart from that bug, Visual Studio seems to be great for Python.
This is a bug that is already fixed for the next release - I screwed up storing our state while processing line-by-line when fixing another bug.
If you're really anxious you can actually build the MSI which includes the tools from the sources on CodePlex. Once you have the VS SDK installed it should be as simple as running Scripts\Bat\Dev.bat to setup the enlistment environment and then msbuild Msi\Installer.proj which will produce an MSI in Bin\Debug.
I'm trying to run the Visual Studio 2005 sample macro that attaches the debugger to calc.exe. Neither it nor any other macro seem to do anything when I run them. Calc.exe is running. "Tools->Options->Add-in/Macros Security->Allow macros to run" is checked. The error list shows no errors.
I had this same problem just happen to me. Macros in VS2005 were working fine, and then suddenly stopped one day. I checked permissions, that macros were enabled, etc. I ran the VS2005 setup program and repaired my installation, and none of this fixed it. Finally I uninstalled all the Windows updates that came in the last update cycle. This fixed the problem for me. I uninstalled a bunch at once, so I don't know exactly which update caused the problem, but I know it was at least one of these:
KB2916036
KB2912390
KB2911501
KB2909921
KB2909210
KB2901112
KB2898857
KB2862973
KB2843630
as I uninstalled all of these, and then the macros started working again. All of these Windows updates happened for me on Feb 13, 2014.
Hope this helps someone else.
Mark
P.S. I later discovered it was KB2898857 and you can leave it installed if you edit a few config files, as described here:
http://visualstudioextensions.vlasovstudio.com/2014/02/13/visual-studio-2010-macros-stop-working-after-february-2014-windows-update/#Update
Sounds like your Visual Studio 2005 instance is flaky, or that your Visual Studio 2005 installation is broken. If restarting VS2005 doesn't help, run the VS2005 setup and choose repair. Hope this helps.
Regards,
Sebastiaan
I had this problem too (but in Visual studio 2010).
After multiple attempts to fix it. I discovered it was a stupid problem.
I had another macro in another module that didn't compile (I had semi-colons at the end of lines).
Even though I was running a macro in a different module it didn't seam to matter.
If you are having this problem an easy thing you can check is looking in the error list for any errors in your code. It's very easy to put semi-colons at the end of your lines out of habit.