This is my bash script:
#!/usr/local/bin/bash -x
touch /usr/local/p
touch /usr/local/rec
DATA_FULL=`date +%Y.%m.%d.%H`
CHECK=`netstat -an | grep ESTAB | egrep '(13001|13002|13003|13004|13061|13099|16001|16002|16003|16004|16061|16099|18001|18002|18003|18004|18061|18099|20001|20002|20003|20004|20061|20099|13000|16000|18000|20000)' | awk '{ print $5 }' | sort -u | wc -l`
netstat -an | grep ESTAB | egrep '(13001|13002|13003|13004|13061|13099|16001|16002|16003|16004|16061|16099|18001|18002|18003|18004|18061|18099|20001|20002|20003|20004|20061|20099|13000|16000|18000|20000)' | awk '{ print $5 }' | sort -u | wc -l > /usr/local/www/p
STAT=`cat /usr/local/www/rec`
if [ "$CHECK" -gt "$STAT" ]; then
echo $CHECK"\n"$DATA_FULL > /usr/local/p
fi
Ofcourse I've runned chmod +x script.sh and then sh script.sh, then I receive the following message: [: : bad number.
Why does it happends?
Run your script using
sh -x script.sh
It'll print every line it executes and the variable output.
Run the netstat command and stat command outside and check.
If these are integer for sure, use this syntax,
if [ "0$(echo $CHECK|tr -d ' ')" -gt "0$(echo $STAT|tr -d ' ')" ];
A simple hack. Only works if $STAT is always either empty or positive number.
Are you sure that both STAT and CHECK are numbers that can be compared with -gt?
probably your /usr/local/www/rec is empty. Try
STAT=`cat /usr/local/www/rec 2>/dev/null || echo 0`
maybe.
Related
I run the below script in a reference env and get the correct output in the output file, but when I run the same in production the output file is empty.
I tried debugging the using set -x, and understand that the for loop is not getting executed in the prod env.
please suggest what might be the issue.
#!/bin/ksh
DIR=/some/log/dir/error
DATE=$1
OUTPUT=/some/logs/dir/scripts/output/output.csv
. /calling/env/setupscript.ksh
for file in $(find $DIR 2>/dev/null| grep $ASOF | grep -i something1 | grep -vi someotherthing2 | grep -iv someotherthing3 | grep -vi someotherthing4 | grep -vi someotherthing4 )
do
echo "Checking file $file..."
if [[ -z "$DONE" ]] then
head -1 $file | read line
echo "File name;Filter name;Type;Scenario;$line" > $OUTPUT.tmp
DONE=1
fi
fullfile=$file
file=$(basename $file)
file=${file#SPR_RPT_}
file=${file#SPR_BY__}
echo $file | awk -F_ '{ print $(NF-2)" "$(NF-1) }' | read type scen
filter=${file%%_$type\_*}
grep ERROR $fullfile | while read line
do
echo "$(basename $fullfile);$filter;$type;$scen;$line" >> ${OUTPUT}.tmp
done
done
Context
Got a daft script that checks a process is running on a group of hosts, like a watchdog, as I say it's a daft script so bear in mind it isn't 'perfect' by scripting standards
Problem
I've ran bash -x and can see that the script finishes its first check without actually redirecting the output of the command to the file which is very frustrating, it means each host is actually being evaluated to the last hosts output
Code
#!/bin/bash
FILE='OUTPUT'
for host in $(cat /etc/hosts | grep webserver.[2][1-2][0-2][0-9] | awk {' print $2 ' })
do ssh -n -f $host -i <sshkey> 'ps ax | grep myprocess | wc -l' > $FILE 2> /dev/null
cat $FILE
if grep '1' $FILE ; then
echo "Process is NOT running on $host"
cat $FILE
else
cat $FILE
echo "ALL OK on $host"
fi
cat $FILE
done
Script traceback
++ cat /etc/hosts
++ awk '{ print $2 }'
++ grep 'webserver.[2][1-2][0-2][0-9]'
+ for host in '$(cat /etc/hosts | grep webserver.[2][1-2][0-2][0-9] | awk {'\'' print $2 '\''})'
+ ssh -n -f webserver.2100 -i <omitted> 'ps ax | grep myprocess | wc -l'
+ cat OUTPUT
+ grep 1 OUTPUT
+ cat OUTPUT
+ echo 'ALL OK on webserver.2100'
ALL OK on webserver.2100
+ cat OUTPUT
+ printf 'webserver.2100 checked \n'
webserver.2100 checked
+ for host in '$(cat /etc/hosts | grep webserver.[2][1-2][0-2][0-9] | awk {'\'' print $2 '\''})'
+ ssh -n -f webserver.2101 -i <omitted> 'ps ax | grep myprocess | wc -l'
+ cat OUTPUT
2
+ grep 1 OUTPUT
+ cat OUTPUT
2
+ echo 'ALL OK on webserver.2101'
ALL OK on webserver.2101
+ cat OUTPUT
2
+ printf 'webserver.2101 checked \n'
webserver.2101 checked
Issue
As you can see, it's registering nothing for the first host, then after it is done, it's piping the data into the file, then the second host is being evaluated for the previous hosts data...
I suspect its to do with redirection, but in my eyes this should work, it doesn't so it's frustrating.
I think you're assuming that ps ax | grep myprocess will always return at least one line (the grep process). I'm not sure that's true. I'd rewrite that like this:
awk '/webserver.[2][1-2][0-2][0-9]/ {print $2}' /etc/hosts | while IFS= read -r host; do
output=$( ssh -n -f "$host" -i "$sshkey" 'ps ax | grep "[m]yprocess"' )
if [[ -z "$output" ]]; then
echo "Process is NOT running on $host"
else
echo "ALL OK on $host"
fi
done
This trick ps ax | grep "[m]yprocess" effectively removes the grep process from the ps output:
the string "myprocess" matches the regular expression "[m]yprocess" (that's the running "myprocess" process), but
the string "[m]yprocess" does not match the regular expression "[m]yprocess" (that's the running "grep" process)
I need some help . I want the result will be
UP:N%:N%
but the current result is
UP:N%
:N%
this is the code.
#!/bin/bash
UP=$(pgrep mysql | wc -l);
if [ "$UP" -ne 1 ];
then
echo -n "DOWN"
else
echo -n "UP:"
fi
df -hl | grep 'sda1' | awk ' {percent+=$5;} END{print percent"%"}'| column -t && echo -n ":"
top -bn2 | grep "Cpu(s)" | \sed "s/.*, *\([0-9.]*\)%* id.*/\1/" | \awk 'END{print 100 - $1"%"}'
You can use command substitution in your first sentence (notice you're creating a subshell in this way):
echo -n $(df -hl | grep 'sda1' | awk ' {percent+=$5;} END{print percent"%"}'| column -t ):
I've written the bash script (searchuser) which should display all the users who are executing a specific program or a script (at least a bash script). But when searching for scripts fails because the command the SO is executing is something like bash scriptname.
This script acts parsing the ps command output, it search for all the occurrences of the specified program name, extracts the user and the program name, verifies if the program name is that we're searching for and if it's it displays the relevant information (in this case the user name and the program name, might be better to output also the PID, but that is quite simple). The verification is accomplished to reject all lines containing program names which contain the name of the program but they're not the program we are searching for; if we're searching gedit we don't desire to find sgedit or gedits.
Other issues I've are:
I would like to avoid the use of a tmp file.
I would like to be not tied to GNU extensions.
The script has to be executed as:
root# searchuser programname <invio>
The script searchuser is the following:
#!/bin/bash
i=0
search=$1
tmp=`mktemp`
ps -aux | tr -s ' ' | grep "$search" > $tmp
while read fileline
do
user=`echo "$fileline" | cut -f1 -d' '`
prg=`echo "$fileline" | cut -f11 -d' '`
prg=`basename "$prg"`
if [ "$prg" = "$search" ]; then
echo "$user - $prg"
i=`expr $i + 1`
fi
done < $tmp
if [ $i = 0 ]; then
echo "No users are executing $search"
fi
rm $tmp
exit $i
Have you suggestion about to solve these issues?
One approach might looks like such:
IFS=$'\n' read -r -d '' -a pids < <(pgrep -x -- "$1"; printf '\0')
if (( ! ${#pids[#]} )); then
echo "No users are executing $1"
fi
for pid in "${pids[#]}"; do
# build a more accurate command line than the one ps emits
args=( )
while IFS= read -r -d '' arg; do
args+=( "$arg" )
done </proc/"$pid"/cmdline
(( ${#args[#]} )) || continue # exited while we were running
printf -v cmdline_str '%q ' "${args[#]}"
user=$(stat --format=%U /proc/"$pid") || continue # exited while we were running
printf '%q - %s\n' "$user" "${cmdline_str% }"
done
Unlike the output from ps, which doesn't distinguish between ./command "some argument" and ./command "some" "argument", this will emit output which correctly shows the arguments run by each user, with quoting which will re-run the given command correctly.
What about:
ps -e -o user,comm | egrep "^[^ ]+ +$1$" | cut -d' ' -f1 | sort -u
* Addendum *
This statement:
ps -e -o user,pid,comm | egrep "^\s*\S+\s+\S+\s*$1$" | while read a b; do echo $a; done | sort | uniq -c
or this one:
ps -e -o user,pid,comm | egrep "^\s*\S+\s+\S+\s*sleep$" | xargs -L1 echo | cut -d ' ' -f1 | sort | uniq -c
shows the number of process instances by user.
I am trying to write a script to find a reverse SSH PID and kill it if present. I am stuck on "awk" as it gives error. below is the script:
a=('ps -aef | grep "ssh -fN" | grep -v grep | awk '{ print $2 }'')
if [ -n "$a" ]
then
echo "String \"$a\" is not null."
kill -9 "$a"
fi
I commented out if, then, kill and fi lines to debug the script. I get following error:
String "ps -aef | grep "ssh -fN" | grep -v grep | awk {" is not null.
I believe parenthesis for awk is creating the problem and I am unable to get a workaround for this. On Command line, this works perfectly and returns the correct PID.
ps -aef | grep "ssh -fN" | grep -v grep | (awk '{ print $2 }'
Once the PID is passed on to variable "a", I need to issue kill command. OS is Centos 6.4
P.S: I am not fluent on scripting but trying to achieve an objective. Help will be highly appreciated!
There are multiple problems with your script.
You need command substitution to store the output of ps pipeline into an array.
You need to check for the number of elements in the array.
Refer to the array instead of the variable.
The following might work for you:
pids=( $(ps -ef | grep '[s]sh -fN' | awk '{print $2}') )
if [ "${#pids[#]}" -gt 0 ]; then
kill -9 "${pids[#]}";
fi
First, if you have grep and then awk, you can get rid of the greps:
ps -aef | grep "ssh -fN" | grep -v grep | awk '{ print $2 }'
ps -aef |awk ' { if ( ($0 ~ /ssh -FN/) && (! $0 ~ /grep/) ) { print $2 } }'
However, instead of using ps, use pgrep.
pgrep -f "ssh -[fN][fN]" # Will match against either 'ssh -fN' or 'ssh -Nf'
There is even a pkill that will do the entire command for you:
pkill -f "ssh -[fN][fN]"
That will find all of the processes that match that particular string and kill them (if they exist).