I have glassfish v3 on windows 7 installed, but it won't start on 8080. I get typical dead page when I go to 8080 like you would expect if it's not running.
I tried to start it manually.
C:\glassfish3\bin
asadmin start-domain and what i get is "system cannot find the path specified"
I searched hi and low for an answer but most questions involve glassfish not starting because the port is not free. however that's not my issue.
I've tried reinstalling about a half dozen times and even rebooting. nothing changes
An alternative answer:
Download the zip version here:
http://download.java.net/glassfish/3.1.2/release/glassfish-3.1.2.zip
Unzip this to c:\glassfish3
This command will work:
C:\glassfish3\bin\asadmin.bat start-domain domain1
Its a configuration issue, when you try to install glassfish server from the installer sans bundled jdk,simply go to "\glassfish3\glassfish\config", set AS_JAVA to jdk home dir in asenv.bat file, re-run the installation, chose custom installation and "configure an existing installation" and you are done.
For more info:http://java.net/jira/browse/GLASSFISH-16155.
It looks like you forgot a slash in your command. The error your getting isn't a glassfish error, it's a DOS error.
try:
C:\glassfish3\bin\asadmin.bat start-domain domain1
or
C:\glassfish3\bin\asadmin start-domain domain1
Hi I was facing the same issue. I am able to resolve the same issue by following below steps:
Go to \glassfish\config (Note: In my case it is c:\glassfish3\glassfish\config)
Now open asenv.bat in notepad.
Make the value of AS_JAVA same as JAVA_HOME environment variable.
Now open command prompt and go to the bin folder and run asadmin start-domain domain1.
If you are getting error that no domain exist then create new domain by following below link:
http://docs.oracle.com/cd/E19776-01/820-4497/create-domain-1/index.html
Related
I have to uninstall tomcat before reinstall it.But, I mistakenly deleted the file folder first and then uninstalled it from "control Panel", during this process I think somewhat might be got wrong. Now when I am trying to install it it is giving me the message:-
How can I overcome this?
it means that you have already installed a version of tomcat8 on your pc. But you can fix this problem by opening the cmd in administrator mode. then you start the command:
sc.exe delete tomcat8
That is because the server is not fully out of your computer, here follow these steps to remove the existing server on windows:
Navigate to Control Panel.
Open Administrative tools.
Open SERVICES.
You will find Apache tomcat version name, right click on it and open properties.
Cope the name of the server: Tomcat8/Tomcat9.
Now open and run the command prompt as an administrator:
https://www.thewindowsclub.com/how-to-run-command-prompt-as-an-administrator
Write the command: sc Delete Tomcat8/Tomcat9 and hit enter, the existing server is
removed and you are all set to install a new one.
While trying to start Apache using XAMPP, I was receiving - "Attempting to start Apache service..." message in XAMPP UI. No further details were available.
Where can I see the logs (I was running XAMPP as Admin) ?
IF PORT 80 IS NOT THE ISSUE!
Check to see if the port 80 is in use first as this can be an issue.
You can do this by typing "netstat -an" into cmd. The look for 0.0.0.0:80 under Local Address, if you find this is in use then follow the solution from #Karthik. However, I had a similar issue but my port 80 was not in use.
My XAMPP had wrong paths locations, steps to fix this:
1.Find out the Apache version you are using, you can find this by looking in Services (Control panel, Admin Tools, Services) and finding Apache in my case it was listed as Apache2.4
2.Close XAMPP.
3.Run cmd as admin.
4.execute 'sc delete "Apache2.4"' (put your version in place of mine and without the surrounding ' ', but with the " " around Apache).
5.execute 'sc delete "mySQL"', again remove the '' when you type it.
6.reopen XAMPP and try starting Apache
If you are having trouble with FileZill, Mercury, or Tomcat you could try it here too, but I have not tested that myself.
Hope this helps!
I realized it was a port issue since I was running IIS and other web servers in my machine. But I was more interested to see a detailed error message with the port number in the UI.
Seems like it was not logged in the UI or log file (at least in my case), but in the Event viewer (Control panel -> View Event Logs). Under the Even viewer -> Windows Logs -> Application
I could see a permission error something like the below one:
An attempt was made to access a socket in a way forbidden by its access permissions. : AH00072: make_sock: could not bind to address 0.0.0.0:443
To fix this permission issue for SSL port, Please change the below line in httpd-ssl.conf (C:\xampp\apache\conf\extra)
# When we also provide SSL we have to listen to the
standard HTTP port (see above) and to the HTTPS port
Listen xxx
Replace XXX with any valid port number that is open in your machine
If you are having issues with Port 80, then change the httpd.conf file (C:\xampp\apache\conf)
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 127.0.0.1:8000
I have also summarized other solutions that I came across:
Most often Skype blocks the Apache port. So terminate it and try again.
Find the process id (PID) that is using the Blocked port ( netstat -ano) and kill the corresponding process in Windows Task Manager.
For those who have accidentally (or not) changed one of the .conf files and apache does not run even after trying all the above solutions.
One easy way to track where the issue is located, is to run Apache via command prompt:
(On windows) : open command prompt as admin then navigate inside the bin folder of Apache , next run
httpd in order to run apache
C:\xampp\apache\bin\httpd
For my case it was :
someone had added a virtual host in the specific file that caused the problem . I commented the lines and Apache ran fine.
start xampp (as administrator),
(1) right click C:\xampp\xampp-control.exe, and run as administrator.
(2) unistall service module and then install service module.
(3) now try start the apache and mysql.
Check your DocumentRoot path (in httpd.conf); a typo there can cause this problem.
Had the same issue while updating to PHP7.2
Problem:
First I closed skype and then checked whether port 80 is not an issue. How you can check that? See #AlexT comment above.
In my case, port 80 wasn't an issue. So now I had to figure out what was wrong. So I checked Error Logs Control Panel > Even viewer > Windows Logs > Application and found following error against Apache2.4
httpd.exe: Syntax error on line 520 of C:/xampp/apache/conf/httpd.conf: Syntax error on line 18 of C:/xampp/apache/conf/extra/httpd-xampp.conf: Cannot load C:/xampp/php/php7ts.dll into server: The Apache service named is not a valid Win32 application.
Which means I had installed wrong PHP version. Actually I downloaded win64 version while the required version was Win32 for me.
So I downloaded correct version from: Download PHP 7.2.0 extracted it in C:/xampp/php folder, restarted the apache and it worked :)
I had the same issue, executing "setup_xampp.bat" in xampp folder solved my issue.
I had the same problem but it was because I had a previous version of xampp already installed and I tried to install a newer version. I had installed the newer version in another file directory (I had named the file directory xampp2). I solved the problem by uninstalling the newer version, renaming the old one (I renamed it xamppold) and I installed xampp again.
I guess if you haven't installed xampp in another file directory , it should be enough to reinstall xampp. If you are worried about your files , you always can make a backup before reinstalling xampp.
I solved the problem after watching the xampp activity log (the list of the bottom) and realizing xampp was trying to open the custom file path but I had another route path. If the first option didn't work, at least you can scroll up in the activity log and see what's error you get while starting as admin and trying to re install the Apache module or trying to start the module.
You may wander why I didn't just simply uninstall the whole thing from the beginning , and the answer would be because I had to tweak a couple of things in xampp for some different projects (from changing the ports , to add .dll to run mongo.db in Apache), and I was just too lazy to re-do everything again :b
I hope my answer can be helpful for anyone since this is my first time writing in stackoverflow :)
Cheers
In my case, with the same problem and Xampp window, I had copied \apache\conf\extra\httpd-vhosts.conf entries from an old Xampp version to a newly installed one so I could continue to open local projects in browsers. One of the vhosts paths was wrong. After deleting that entry Apache started without problem.
The reference by #Karthik to "in the Event viewer (Control panel -> View Event Logs" saved me time. It's all too easy to presume Xampp logs will point to the problem. It doesn't.
Also check if your xampp is installed in the main directory like C or D or E and not in or within a folder of that directory? i.e. ( "D:/Xampp" or is it "D:/something/Xampp") if its not in the main path of the directory, it will show this error.
copy your xampp directory from "D:\Something\Xampp" to "D:"
So it becomes like this "D:\Xampp"
and the issue will be resolved.
Starting Xampp as a console application (simply by doubleclicking xampp_start.exe in the Xampp root folder) was the only thing that worked for me on Windows 10 (no Skype, no Word Wide Web Publishing Service). WampServer and UwAmp also didn't work.
I had a hard-coded IP in httpd.conf and my local IP had changed which was causing my issue, changed IP over and all worked again
My scenario was different after I tested all the possible options. If you have changed the ports and still get the same problem, well here's something you can try out. This was done in Windows 7.
Step 1: Confirm the cause of the error by going to Control Panel -> System and Security -> Administrative Tools -> Event Viewer -> Windows Logs -> Application -> Error. Mine said "The Apache service named reported the following error:
httpd.exe: Syntax error on line 424 of C:/xampp/apache/conf/httpd.conf: Cannot load c:\xampp\php\php5apache.dll into server: The specified module could not be found." So I needed to change \php5apache.dll to the version of my php and apache version installed which was php7apache2_4.dll
Step 2: To get the correct name for your .dll php and apache file, got to C:\xampp\php. You will see something like php7apache2_4.dll with other files in the folder.
Step 3: Go to C:/xampp/apache/conf/httpd.conf and edit the configuration file and change "c:\xampp\php\php5apache.dll" to "c:\xampp\php\php7apache2_4.dll" in my case. Make sure you open the file as administrator save changes made.
Step 4: Run the xampp server and everything should work fine. Do not forget to shut down the xampp server before doing the changes to the apache configuration file.
Hope this helps. Cheers! :)
Try to install x86 version of XAMPP. The default XAMPP version on their website is x64 (maybe because I'm using x64 Windows 7).
download link here
I had this issue when I installed under Program Files, which they do not recommend due to write issues. This might only be a problem if you are not logged in as an admin and use a password to install. I just uninstalled and installed in a directory that did not need admin privileges.
Make sure Apache didn't get Disabled in Services (Control panel, Admin Tools, Services). If it's Disabled then Set it to Manual and it should run. That was my case, I found Apache Disabled.
Solution for my particular scenario (It had been working a couple days before getting borked):
Port 80 was not the problem, but something I had done while messing around with Services and Startup.
Type msconfig on Windows' Start menu
Click System Configuration
Screenshot for System Configuration
In the Services tab, search for Apache24 (Click "Hide all Microsoft services" in the checkbox at the bottom of the window to make it easier to find)
If its checkbox isn't checked, check it
If it was already checked, then this guide isn't going to help. However if it is:
Click OK, your PC will have to restart
Try once again! In my case Apache was already running once I opened Xampp
I had the same issue.Just click on services button.Then find apache and right cick > properties > set startup type as Automatic/ Manual. Now close apache and try again.It will work!
For me it wasn't a port or service issue; I had to re-run the XAMPP setup script. Although this didn't directly fix the issue for me, the script was much more verbose than the XAMPP log, pointing me in the right direction to actually solve the problem.
From the XAMPP GUI, click on Shell, type set, press Tab to autocomplete to the setup_xampp.bat file, and then press Enter to run it.
In my case I got the following output:
[ERROR]: Test php.exe failed !!!
[ERROR]: Perhaps the Microsoft C++ 2008 runtime package is not installed.
[ERROR]: Please try to install the MS VC++ 2008 Redistributable Package from the Mircrosoft page first
[ERROR]: http://www.microsoft.com/en-us/download/details.aspx?id=5582
This particular error is misleading. Although it specifies the Visual C++ 2008 Redistributable Package, PHP 7.4.x requires the Visual C++ 2019 Redistributable Package.
After installing that and following the prompt to restart, sure enough I'm now able to start Apache as normal.
make sure no space in front of the port number if you ever edited it.
From Xampp control panel, click on config (next to Apache), then choose Apache(httpd.config), search for listen 80 and change the port to another port.
If nothing works with you, I would suggest you download MAMP and use it instead.
It does the same thing, if not better.
Comment this lines from httpd.conf:
# Virtual hosts
#Include etc/extra/httpd-vhosts.conf
In the case you're using them it may solve.
when i run xampp control panel normal:
I had been run
I can’t start apache
So, I will run it with administrator:
I can run apache
I have been googling for the past few hours but I simply can't get my apache on wamp to start. My skype isn't running, and the test port 80 shows it isn't being used by anything. Before this happened, I was trying to add a new vhost, but now I have reverted back all of the files where I made changes. Anyway to debug why apache won't start?
Clicking on start/resume service for apache doesn't show any errors either.
Also just in case, I am running Win7 64bit
If you have an issue in the httpd.conf or any files included by it there are a couple of ways to find out what the problem is
First look at your Windows Event Viewer. Click on the Windows link in the menu on the left, and then submenu Applications.
Look for messages from Apache with the red error icon.
Secondly, open a command window, then CD into \wamp\bin\apache\apache2.x.y\bin, replace x,y with your actual version.
Now you can run this command to get Apache(httpd) to validate the httpd.conf file.
httpd.exe -t
This should give errors with line numbers related to the http.conf file.
It stops on the first error, so you will have to keep running it and fixing the error and then run it again until it gives the all OK message.
Use apaches startup debug tool from command: httpd.exe -e warn
press Win+R
type cmd and press enter
goto directory which contains your apache httpd.exe file. for example if your wamp is installed in e:\wamp type cd /d e:\wamp\bin\apache\ApacheX.X.X\bin in cmd and press enter.
type httpd.exe -e warn (or httpd.exe -e debug for more details) to see error message about problem which is prohibiting apache to start.
That is what I did and it helped me to find out what my Apache-PHP needed:
C:\Users\Admin>cd C:\wamp\bin\apache\apache2.4.9\bin
C:\wamp\bin\apache\apache2.4.9\bin>httpd -t
Syntax OK
C:\wamp\bin\apache\apache2.4.9\bin>httpd -k start
[Thu Apr 23 14:14:52.150189 2015] [mpm_winnt:error] [pid 3184:tid 112]
(OS 2)The system cannot find the file specified. : AH00436:
No installed service named "Apache2.4".
C:\wamp\bin\apache\apache2.4.9\bin>
The most simple solution:
Uninstall and reinstall WAMP (do not even try to set it up on top of existing installation - it would not help)
P.S.
If you wonder how did I get to this situation, here is the answer: I was trying to install WAMP and it throws me an error in the middle of installation saying:
httpd.exe - System Error
The program can't start because MSVCR110.dll is missing from your computer.
Try reinstalling the program to fix this problem.
OK
I got and installed Microsoft Visual C++ 2012 Redistributable from here http://www.microsoft.com/en-us/download/details.aspx?id=30679#
And it gave me the "dll" and the MYSQL started working, but not Apache.
To make Apache to work I uninstalled and reinstalled WAMP.
This solved the issue for me:
Right click on the WAMP system try icon -> Tools -> Reinstall all services
Go to C directory and then go to below mentiond path of you wamp server.
C:\wamp64\bin\apache\apache2.4.46\bin>
Then in Address bar enter "CMD" and press enter.that wil open the command prompt.
Now past below comman
httpd.exe -e warn
to see error message about problem which is prohibiting apache to start.
If you error is releated to port then
Right click on wamp server than on apache and then on httpd.confg,
Now search 80 and replace with 81 in that file and close and restart wamp
Invalid Command '80HostnameLookups' , perhaps misspelled or defined by a module not included in the server configuration
I got this error when I debug the issue (wamp server was not going online) by the procedure defined by #RiggsFolly. Just comment the line 80HostnameLookups Off by changing it to #80HostnameLookups Off.
This solution worked for me and apache starts running.Note:80HostnameLookups Off can be found on line 222 of httpd.conf file located in C:\wamp\bin\apache\apache2.4.9\conf
phpmyadmin.conf opened with apacheconf.exe and contents chained so you must do the following:
copy contents of phpsysinfo.conf [C:\wamp\alias]
paste into phpmyadmin.conf [C:\wamp\alias]
change Alias /phpsysinfo "c:/wamp/apps/phpsysinfo3.1.12/" to Alias /phpmyadmin "c:/wamp/apps/phpmyadmin4.1.14/"
change <Directory c:/wamp/apps/phpsysinfo3.1.12/ /> to <Directory c:/wamp/apps/phpmyadmin4.1.14/ />
its worked for me.
My solution was that 2 .dll files(msvcp110.dll, msvcr110.dll) were missing from the directory :
C:\wamp\bin\apache\apache2.4.9\bin
So I copied these 2 files to all these locations just in case and restarted wamp it worked
C:\wamp
C:\wamp\bin\apache\apache2.4.9\bin
C:\wamp\bin\apache\apache2.4.9
C:\wamp\bin\mysql\mysql5.6.17
C:\wamp\bin\php\php5.5.12
I hope this helps someone out.
Sometimes it is Skype or another application "Holding" on to port 80. Jusct close Skype
My solution on Windows 10 was just to stop IIS (Internet Information Services).
If Apache is installed as a Windows service, any errors will show up in the Windows System event log. To view the System event log, navigate to Windows Administrative Tools->Event Viewer and open the System log in the Windows Logs folder. Or, you can see the same errors by running httpd.exe at the command line. In my case, httpd.exe is located here: C:\Bitnami\wampstack-5.6.26-2\apache2\bin.
If there is a problem with starting Apache, most likely the problem can be fixed by editing the httpd.conf file located in the \apache2\conf folder.
As already suggested, you can check the syntax of the httpd.conf file by running httpd.exe -t at the command line.
I found that the I had to
Change SetEnv PATH "C:\Bitnami\wampstack-5.6.26-2\apache2\bin;${PATH}" in httpd.conf
to
SetEnv PATH "C:\Bitnami\wampstack-5.6.26-2\apache2\bin;%PATH%"
I had the same problem. My port 80 was not in use.
After thorough research, all I did was to download Update for Universal C Runtime.
Once installed and my PC restarted, all was OK.
I was having the same problem, the mysql service was starting but not the apache service, the main problem about that is one of your virtual hosts isn't config. correctly, all i did was deleted the virtual host that i created "D:\wamp\bin\apache\apache2.4.23\conf\extra\httpd-vhosts, restarted all services apache service started working correctly and so i just went to localhost and added a virtual host automatically and so it worked!!
I was having same problem.
I followed this steps, problem solved.
run command line (CMD) with Administrator Permission.
cd c:/wamp64/bin/apache/apache2.4.27/bin
httpd.exe -k uninstall
httpd.exe -k install
at last restart all services from wamp system tray icon
It turns out I didn't have Microsoft visual c++ installed, installing it solved the problem for me.
If you have Microsoft Visual Studio running at time of running, try to disconnect it and try again
The RabbitMQ windows service will not start:
C:\Program Files (x86)\RabbitMQ Server\rabbitmq_server-3.0.4\sbin>rabbitmq-service.bat start
C:\Program Files (x86)\erl5.10.1\erts-5.10.1\bin\erlsrv: Failed to start service RabbitMQ.
Error: The process terminated unexpectedly.
I can run rabbitmq-server.bat without any problems.
No log entries are made to %appdata%\RabbitMQ\log\ directory when trying to start the service.
Any suggestions to how I make it work? Please...
I faced the same problem and was able to solve the problem following the steps mentioned below.
Run the command prompt as Administrator
Navigate to the sbin directory and uninstall the service. rabbitmq-service remove
Reinstall the service rabbitmq-service install
Enable the plugins. rabbitmq-plugins enable rabbitmq_management
Start the service rabbitmq-service start
Go to "http://localhost:15672/"
Problem solved!
My IT department has mapped %appdata% to a network share and it seems that the RabbitMQ scripts can’t work with that.
I solved the problem this way: Set the environment variable “RABBITMQ_BASE” to “c:\rabbitmq”, uninstall the service (rabbitmq-service.bat remove) and install the service again (rabbitmq-service.bat install).
Deleting "AppData\Roaming\RabbitMQ" solved this problem for me
In my case helped running console as an administrator
- check Erlang compatability with RabbitMQ
** Installtion
Install Erlang
Install Rabbit_MQ
Set system variables
Set Environment variable-
RABBITMQ_BASE c:\RabbitMQ Server
ERLANG_HOME C:\Program Files\erl10.7
Config MQ Server
stop RabbitMq : rabbitmq-service.bat stop
Enable management : rabbitmq-plugins.bat enable rabbitmq_management
Reinstall server : rabbitmq-service.bat install
Start Server : rabbitmq-service.bat start
Start App : rabbitmqctl.bat start_app
Open Brower : http://localhost:15672 user guest / guest
Add new User
List users : rabbitmqctl.bat list_users
Add new user : rabbitmqctl.bat add_user user1 pass1
Give administrator privileges : rabbitmqctl.bat set_user_tags user1
I restarted my computer after install and things are running a lot smoother
Deleting HKEY_LOCAL_MACHINE\SOFTWARE\Ericsson\Erlang\ErlSrv\1.1\RabbitMQ folder from Registry has solved the problem for me. I have to reinstall (uninstall and install) the RabbitMQ after deleting the registry.
Moreover, I have deleted C:\Users\<USERNAME>\AppData\Roaming\RabbitMQ earlier.
I have found the solution from a post of a google group.
My situation was caused by wrong Erlang version. I solved it by the following steps:
Uninstall the older version Erlang
Install the newly version Erlang accordding to https://www.rabbitmq.com/which-erlang.html
Reinstall RabbitMQ
Install RabbitMQ plugin by opening the Windows's cmd and switch to the sbin directory eg.Your-Path\rabbitmq_server-3.7.13\sbin and execute the command rabbitmq-plugins.bat enable rabbitmq_management
Start RabbitMQ and visit http://localhost:15672/
How I solved the same issue... Reinstalled Erlang from x86 to x64. Also checked the option to install Microsoft distributed dlls. I don't know which one of two helped me but it helped at least.
run the following command after installation rabbitmq-plugins enable rabbitmq_management on rabbit mq pathRabbitMQ Server\rabbitmq_server-3.6.9\sbin>rabbitmq-plugins enable rabbitmq_management
I have also come across similar problem, but found that the problem due to folder named "Program" in the OS drive.
Reference.
I renamed my computer and restart. Then everything works fine. I guess Chinese characters effect the rabbit service.
old name: 孙
new name: adam
I faced the same issue of 1067 error in Windows 10. It turns out the rabbitmq config file in location C:\Users\IPS\AppData\Roaming\RabbitMQ\advanced.config was having some syntax error. It was changed from the default configuration. Also, the rabbitmq.conf file at the same location also had a syntax error. I removed the rabbitmq.conf file and removed the changes from the advanced.config file. After that ranbbitmq service started without any issues.
I tried to follow The Java EE 6 Tutorial and start GlassFish with the command below. But I got an error message. How to solve this?
C:\glassfish3\bin>asadmin start-domain --verbose
The system cannot find the path specified.
Go to asenv.bat file in config directory
remove line set AS_JAVA="C:/Program Files(x86)/Java/"
retry asadmin.
It will work this time!.
I fixed this issue by editing glassfish3\glassfish\config\asenv.bat as described in domain1 not configured -- The system cannot find the path specified
then I got an error because no domains existed, that was solved by editing glassfish3\bin\asadmin.bat as described in Oracle Glassfish "There is no Domain" Issue Fix Solution
Hi I was facing the same issue. I am able to resolve the same issue by following below steps:
Go to \glassfish\config (Note: In my case it is c:\glassfish3\glassfish\config)
Now open asenv.bat in notepad.
Make the value of AS_JAVA same as JAVA_HOME environment variable.
Now open command prompt and go to the bin folder and run asadmin start-domain domain1.
If you are getting error that no domain exist then create new domain by following below link:
http://docs.oracle.com/cd/E19776-01/820-4497/create-domain-1/index.html
I got this error, when installing Java EE (which includes GlassFish) using 64 bit windows 7. As a reference installing same Java EE latest to my 64 bit Linux worked well and I could see how it set default domain up.
It seems that in my 64 bit Window 7 asadmin.bat looks my java from "C:\Program Files (x86)\Java\bin\java" even if I have installed 64 bit version in "C:\Program Files\Java\jdk1.7.0_10\bin".
asadmin.bat runs first "%~dp0..\glassfish\config\asenv.bat" and then studies where if guesses java is. There is something odd in this, almost in my configuration, but I can't fix this nicely
%JAVA% -jar "%~dp0..\glassfish\modules\admin-cli.jar" %*
I could manually set %JAVA% right, but how to set nicer correction?
Set your correct Java path in:
<glassfish_home>\glassfish\config\osgi.properties
e.g.
set AS_JAVA=C:\Program Files\Java\jdk1.7.0_80
Note: follow Oracle glassfish's release notes for the supported JDKs