I am getting the following Informatica error:
Note: Output column [AGENT_DISPOSTION_CODE] has no default value. Row will be skipped if transformation errors are encountered
MAPPING> DBG_21056 column=[PHONE_NUMBER], defaultvalue=[ERROR('transformation error')]
How can I fix it?
It's not an error, it's only an information that you have a port with a default value set to ERROR('transformation error'), so Integration Service will skip the NULL values with an ERROR function.
The Designer inserts this expression automatically, when you add a new output port; you can change it. Edit the expression, find the port on the Ports tab and check the Default value field at the bottom:
The ERROR function causes the Integration Service to skip a row and issue an error message, which you define.
When running a session on the Verbose Data Mode and if there is no default value specified for output ports in the Mapping, PowerCenter is designed for the warning messages to show up in the session log.
During the column initialization, PowerCenter evaluates the default value specified for each output port in the Mapping and displays the corresponding message. The evaluation code path is the same as for evaluating any other expressions later on during data transformation.
Example
If you specify SIN(1.415) as the default value for an output port, the evaluation on sin(1.415) executes successfully. Upon a successful evaluation, the following message will be displayed:
MAPPING> DBG_21364 Note: Default value [SIN(1.4)] of output column [output1] will be used if tansformation errors are encountered
However, if the default value is error('transformation error'), the following error message will be displayed during evaluation like any real transformation errors:
MAPPING> TE_7007 Transformation Evaluation Error [<> [ERROR]: transformation error... nl:ERROR(u:'transformation error')]; current row skipped...
Immediately after the evaluation, the following message will be displayed in the session log:
MAPPING> DBG_21367 Note: Output column [NUM38_37] has no default value. Row will be skipped if transformation errors are encountered
Related
I am using Toad Data Point V4.0 to connect to Hive. I try to set below properties using Toad.
set hive.input.format=org.apache.hadoop.hive.ql.io.BucketizedHiveInputFormat;
set hive.optimize.bucketmapjoin=true;
set hive.optimize.bucketmapjoin.sortedmerge=true;
While I can set these properties via Beeline, TOAD throws below error when running above set commands.
[Hortonworks][Hardy] (80) Syntax or semantic analysis error thrown in server while executing query. Error message from server: Error while processing statement: Cannot modify input.format at runtime. It is not in list of params that are allowed to be modified at runtime
Wondering if I have to set these properties somewhere in connection setup or not. Appreciate your input.
We've found a very similar issue with DBVis on Hive.
DBVis is stripping the ‘hive.’ off of commands like “set hive.mapred.mode=strict”. It then checks hive’s list of parameters allowed to be set at runtime for the parameter: “mapred.mode” instead of “hive.mapred.mode”. Since it does not find the parameter, it throws and error.
If we preface the parameter by a second “hive.” (for example, “hive.hive.mapred.mode=strict”) DBVis appears to strips off the first “hive.”. It then finds the stripped version as allowed and sends the stripped version to hive where is executes fine.
NB: This only seems to affect parameters beginning with "hive.".
I want to use jp#gc - Graphs Generator in my Test Plan to create graphs from existing results file(results.csv).
I am getting error - "Error loading file".
My results.csv file has data like below:
14:31:14;1208;login;200;OK;Thread Group 1-2;text;true;950;10;10;1208;1;0;U6021712-TPL-A
I am not sure how Graphs Generator will be able to create various graphs using the data mentioned above. On checking the error log I noticed below message:
2014/12/12 14:31:29 INFO - jmeter.save.CSVSaveService: results.csv does not appear to have a valid header. Using default configuration.
2014/12/12 14:31:29 WARN - jmeter.save.CSVSaveService: Error parsing field 'timeStamp' at line 1 java.text.ParseException: Unparseable date: ""
2014/12/12 14:31:29 WARN - jmeter.reporters.ResultCollector: Problem reading JTL file: results.csv
Any help would be much appreciated!
As error message says, you have an error in the definition of timestamp field on the JMeter instance where you run this code.
And configuration differs from the one that led to the CSV file you got.
So you need to check that you use the same jmeter.properties and user.properties on this instance that the one you used on the instance that generated the CSV.
For example here you should have this to fix this issue (but you may have other issues):
jmeter.save.saveservice.timestamp_format=HH:mm:ss
In Jmeter, timeStamp is long datatype. So make sure that no spaces in timeStamp row (If you have a space , jmeter doesn't accept it and throws
java.lang.NumberFormatException: For input string: "timeStamp"
Example:
Valid data set
1456177238234,224,Java Request 1,200,,Auto Quick Invest 1-1,,true,,0,2,2,null,0,1,0,M-SFO1-SFO1216
Invalid data set
1456177238234,224,Java Request 1,200,,Auto Quick Invest 1-1,,true,,0,2,2,null,0,1,0,M-SFO1-SFO1216
Because timeStamp field has space.
I’m using Visual Studio 2010. Within the project we add a DataSet, inside it; we have a Query Table Adapter to do all the queries to a SQL Server 2000 Data Base. One of the queries is formed using a Stored Procedure that receives four parameters. One of the parameters is a DateTime data type. Although we have check many times, we are receiving an unexpected exception:
Provider encountered an error while sending command parameter[0] '' value and stopped processing.
Conversion failed for command parameter[1] '' because the data value overflowed the type used by the provider.
Provider encountered an error while sending command parameter[2] '' value and stopped processing.
Provider encountered an error while sending command parameter[3] '' value and stopped processing.
Provider encountered an error while sending command parameter[4] '' value and stopped processing.
Working around this, if we delete the DateTime parameter of the Store Procedure, the query executes successfully otherwise we get the exception mentioned before.
We notice that the DateTime parameter has the property set as follows:
DbType: DateTime
ProviderType: DBTimeStamp
Any approach trying to accomplish the execution of the Query will be greatly welcome.
When I received this error, I had to change my date parameter to tell what the data type was.
Old Way
cmd.Parameters.Add(new OleDbParameter("TDate", DateTime.Now));
New Way
OleDbParameter dateParam = new OleDbParameter("TDate", OleDbType.Date);
dateParam.Value = DateTime.Now;
cmd.Parameters.Add(dateParam);
I am debugging a website built on the WebForms model, using ASP, C# as codebehind, and SQL Express 2008 R2. I am trying to debug a page that uses an ASPxGridView, which is populated from the .aspx file, and the dataset is uses is created there as well. The data is selected using
SelectCommand="SELECT MachineID, ProgramNo, (CONVERT (VARCHAR(19), Start, 120)) as Start,(CONVERT (VARCHAR(12), Stop,114)) as StopTime, WorkCount, PartCount as TotalWorkCount,(CONVERT (VARCHAR(12), Stop-start,114)) as PartCycle FROM Program WHERE (MachineID = #MachineID) AND (WorkCount > 0) AND (CONVERT (VARCHAR(19), Start, 120) >= #StartDate) AND (CONVERT (VARCHAR(10), Start, 120) <= #EndDate) order by Start Desc">
The problem is that most users can login and the page works perfectly, but a few users see the following error in the web browser:
A field or property with name 'PartCycle' was not found in the selected data source. Possible causes of this error may be the following: an incorrect or case-insensitive spelling of the grid column name; assigning a wrong or not properly initialized data source to the grid.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: A field or property with name 'PartCycle' was not found in the selected data source. Possible causes of this error may be the following: an incorrect or case-insensitive spelling of the grid column name; assigning a wrong or not properly initialized data source to the grid.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): A field or property with name 'PartCycle' was not found in the selected data source. Possible causes of this error may be the following: an incorrect or case-insensitive spelling of the grid column name; assigning a wrong or not properly initialized data source to the grid.]
DevExpress.Web.Data.WebDataControllerProvider.GetRowValueByControllerRow(Int32 controllerRow, String fieldName, Boolean isDesignTime) +300
DevExpress.Web.Data.WebDataControllerProvider.GetRowValue(Int32 visibleIndex, String fieldName, Boolean isDesignTime) +203
DevExpress.Web.Data.WebDataProxy.GetRowValue(Int32 visibleIndex, String fieldName) +77
As you can see, PartCycle is not a column in the tables, but is used as an alias for (CONVERT (VARCHAR(12), Stop-start,114)). To put a twist in the plot, I can view the problem data just fine when I am logged into the site as an Administrator. The users who see this error have various ASPNET Roles, but each have access to the data in the tables selected.
Its because ASPxGridView Caches the Columns.
In your case, your datasource is dynamic i.e. different for different users.
Make sure to Clear the Columns before binding ASPxGridView.
To Clear the Columns:
agvObject.Columns.Clear();
I have a set of run-time parameters in the parameter form in oracle reports that have the "Restrict List to predetermined values". I am able to run the report in the report builder without supplying any value to these parameters. But during the batch run using RWRUN, I am getting the following warning and the report is not generated.
The value of restricted LOV parameter P_PARM1 is not among the selectable values
The above error occurs when I omit the parameter P_PARM1 altogether in the paramter list of RWRUN as well as when I supply it without giving any value to it(implying null) like below:
rwrun.sh <other required parameters here> P_PARM1=
Any help would be much appreciated.
Does rwrun.sh ... P_PARM1='' yield anything different?