On a Magento 1.11.1 site (Pro).
When I go to the URL [site]/customer/account/create I should get the form for creating a customer from the file /frontend/base/default/template/persistent/customer/form/register.phtml in block Mage_Customer_Block_Form_Register. Instead there is no such block included (show hints and show blocks enabled).
The customer login form works [site]/customer/account/login by displaying the form from file /frontend/base/default/template/persistent/customer/form/login.phtml in block Mage_Customer_Block_Form_Login. This works fine.
I'm using basically the modern theme with modifications (in a separate directory).
Also, customers are still able to create an account via the checkout process.
Is there an configuration parameter that might be set that could disable the standalone 'create customer account' functionality?
Could I have some issue with the templating that is getting in the way of displaying this register block?
So far I have not found the program logic that controls whether the register block is included or removed or anything? I've checked on file permissions and everything else I could think of, but there is obviously something I am overlooking or not aware of.
Any pointers on discovering the source of the problem would be appreciated.
Related
I have tirelessly tried to create and save an email template to no avail. I have tried different locales and all the templates load fine. But whenever I try to save the template I get this error message - "The template Name must not be empty." although the template name field is filled. What could be the problem?
I strongly recommend the Yireo Email Override extenson (see https://www.yireo.com/software/magento-extensions/email-override). One advantage is templates are stored as files and so can be managed through source control (such as git).
Your problem is mod_security. A fast way to see if that is the problem disable mod_security and try again (http://www.inmotionhosting.com/support/website/modsecurity/disable-mod-security-via-modsec-manager).
Remember to enable again mod_security then find which rule make you problems
http://www.inmotionhosting.com/support/website/modsecurity/find-and-disable-specific-modsecurity-rules
and then make changes to your files (file permission etc.) or you can disable that rules (not recommended).
I had the same issue and addressed it as follows. I deleted most of the content I wanted to have in the email leaving behind just our logo (I suspected the system was rejecting something in the content). I saved the template without most of the content. It saved properly. I then opened up the template and pasted in the rest of my html and saved it.
I am new to Oracle UCM(already hate it) and I have this bug on the standart "Content information" page when displaying "Folder" meta - instead of DCOLLECTIONNAME I get DCOLLECTIONID from COLLECTIONS table. Now we have two versions of UCM installed on different servers, one with our custom module and one without it, you can guess which one works fine :-) I checked settings in admin aplet / Configuration manager and they are the same on both servers, so my next thought was there must be some problem with page template(I found some function named getCollectionPathFromID somewhere which does exactly what I need but dont know where to put it to make it work). Can anyone point me to the right direction? I found some template called std_page.htm but it contains realy huge amount of code... Any help would be appreciated.
What specific versions of WebCenter Content are you using? Are the two instances on the exact same version? You can find this information on the Configuration for instance name page.
How are you trying to view the data?
Are you calling &IsSoap=1 or &IsJava=1? Or are you meaning the display of the folder name/path on the page is showing dCollectionID?
I assume that based on dCollectionID you are using the Folders_g (Contribution Folders) component and not FrameworkFolders.
Can you provide a link to download your custom component? It sounds like this may be the culprate.
I installed an extension to add custom fields to customer registration form.I want to add some option value in dropdown menu box of input validation in backend admin page..could you plz tell me the path of the folder where can I find the phtml file which is responsible for that part ?
-Thanks.
The files you are looking for are in:
app/design/adminhtml/default/default/template
But just changing the .phtml file won't do the job. The customer model itself should be extended to provide for your extra field. Therefore i highly recommend you to write a module for this instead of altering Magento core code. This to make sure that you can still use updates in the future.
Writing such an module requires more in depth knowledge of Magento. For more information on custom adminhtml see here.
For information on extending the core functionality look here.
If you don't feel like programming this all yourself take a look at customer attribute modules on Magento Connect.
I have a site, 1.5 magento, and the cart functionality (and the customer account functionality) seem to be disabled. When i attempt to go to the url 'checkout/cart', just the homepage displays.
Ive checked all the usual suspects..including:
checked the url_rewrites table (there is one entry in their referencing checkout/cart...but goes from checkout/cart to checkout/cart, so dont see this is an issue, but did edit it just to rule it out)
enabling/disabling of the module itself, looking at both the etc/modules files and removing, and checking the module listing in system->config->advanced area.
trying to step through the code..try detect where the change over of pagedata occurs - struggling here.
looking for certain terms in the codebase...and database SQL file.
the htaccess file, looking for a rewrite
local/community modules..and any rewriting of the checkout
Im starting to think a hack is in place here to show the homepage when visiting checkout url. The url : www.mysite.co.uk/checkout/cart remains in the address bar, but i see homepage data.
Anyone know where else i can check...or easily locate the cause of this issue?
Many thanks
S
Did you look in backend under Configuration -> Sales -> Checkout ?
There is a field called "Enable One-Page Checkout" which has to be enabled. If you disable it, your store will just run fine but neither registered customers nor guests can check out anymore.
Turns out this was rewrites added to the rewrite table manually. Didnt find them at first.
For some reason, when I log into my joomla 1.6 backend, it is now empty, displaying only a logout button. Any Ideas?
I just went through the same problem but on J!1.7.3. There may be many, many reasons but please check using just URL if you can see for example:
[YourDomainHere]/administrator/index.php?option=com_content or
[YourDomainHere]/administrator/index.php?option=com_modules
If content is listing and you're missing just Admin-menu and sub-navigation in back-end --> this means you messed-up with access levels and viewing access.
If you can't see content listing - ignore the rest of this post :-)
...with access levels and viewing access. To check that, try entering [YourDomainHere]/administrator/index.php?option=com_users&view=levels and enter each position in the list. Joomla backend navigation module usually has Access set to Special, so focus on this one. When enter Special - manager, author and super administrator should be ticked. If everything empty in any from the list - this is your issue :)
You need to add manager, author and super administrator to your Special access level. Obviously you can't see Save button, so you need to use database. [wrrr :) sounds scary?] Not a big deal, just go there using for example phpMyAdmin and find _viewlevels table. In there just edit Special and add [6,2,8] values to set up manager, author, super.....
Update database. Try to log-in one more time (close browser and clean cache before).
I hope if this wasn't helpful for you, will be for somebody else.
p.s. There may be a way of 'saving' changes in you joomla access levels with URL. Then you don't need to go to DB .. but I don't know if this is feasible at all :)
Check the rewrite of htaccess and the $mosConfig_absolute_path variable in config.php
Apparently, the Bluestork Template (admin template) has some security issues. In my case there were some missing files in the template folder /administrator/templates/bluestork/ that caused the administrator screen to appear blank. I've copied a clean version of the template in the bluestork folder and after that I was able to see the backend admin area.
I've removed the bluestork templates entirely for now, which seems to be the best option. Joomla installs 2.5.8, 2.5.6, 2.5.2, 1.7.0, 1.6.3 are affected. The Blustork Template is a target for hacks with old Joomla.
this happening becoz of admin user lost his permissions. see below article to fix this issue
http://www.codentalk.com/joomla-admin-showing-blank-page/