I am using VS express 2012 to run a code that display content of many files. I found that first files content do not show and when I debug step by step I found that the content show on the console window and disappear when other results show, which means they get pushed out of the window. of course I scroll up and I find the latest files only not all. Is there any option control this feature? and how can I see all results?
To avoid this you should convert your console application to a Windows Forms one and put all the output on a TextBox. Just execute the command on the Form load and redirect all the output to the TextBox.
It's not much work IMHO.
This is the nature of a console application, no different than if you were to echo data to the Windows command prompt. If there is too much data then of course it will scroll off the visible screen.
I am trying to open a .chm file.
I downloaded the source, extracted it, and double clicked on Waffle.chm and clicked "Open" but no matter what element in the chm file I click, I get the message:
Navigation to the webpage was canceled.
What you can try:
Retype the address.
What's going on here?
Summary
Microsoft Security Updates 896358 & 840315 block display of CHM file contents when opened from a network drive (or a UNC path). This is Windows' attempt to stop attack vectors for viruses/malware from infecting your computer and has blocked out the .chm file that draw data over the "InfoTech" protocol, which this chm file uses.
Microsoft's summary of the problem: http://support.microsoft.com/kb/896054
Solutions
If you are using Windows Server 2008, Windows 7, windows has created a quick fix. Right click the chm file, and you will get the "yourfile.chm Properties" dialog box, at the bottom, a button called "Unblock" appears. Click Unblock and press OK, and try to open the chm file again, it works correctly. This option is not available for earlier versions of Windows before WindowsXP (SP3).
Solve the problem by moving your chm file OFF the network drive. You may be unaware you are using a network drive, double check now: Right click your .chm file, click properties and look at the "location" field. If it starts with two backslashes like this: \\epicserver\blah\, then you are using a networked drive. So to fix it, Copy the chm file, and paste it into a local drive, like C:\ or E:. Then try to reopen the chm file, windows does not freak out.
Last resort, if you can't copy/move the file off the networked drive. If you must open it where it sits, and you are using a lesser version of windows like XP, Vista, ME or other, you will have to manually tell Windows not to freak out over this .chm file. HHReg (HTML Help Registration Utility) Utility Automates this Task. Basically you download the HHReg utility, load your .chm file, press OK, and it will create the necessary registry keys to tell Windows not to block it. For more info: http://www.winhelponline.com/blog/fix-cannot-view-chm-files-network-xp-2003-vista/
Windows 8 or 10? --> Upgrade to Windows XP.
"unblocking" the file fixes the problem. Screenshot:
Win 8 x64:
just move it to another folder or rename your folder (in my case: my folder was "c#").
avoid to use symbol on folder name. name it with letter.
done.
In addition to Eric Leschinski's answer, and because this is stackoverflow, a programmatical solution:
Windows uses hidden file forks to mark content as "downloaded". Truncating these unblocks the file. The name of the stream used for CHM's is "Zone.Identifier". One can access streams by appending :streamname when opening the file. (keep backups the first time, in case your RTL messes that up!)
In Delphi it would look like this:
var f : file;
begin
writeln('unblocking ',s);
assignfile(f,'some.chm:Zone.Identifier');
rewrite(f,1);
truncate(f);
closefile(f);
end;
I'm told that on non forked filesystems (like FAT32) there are hidden files, but I haven't gotten to the bottom of that yet.
P.s. Delphi's DeleteFile() should also recognize forks.
The definitive solution is to allow the InfoTech protocol to work in the intranet zone.
Add the following value to the registry and the problem should be solved:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions]
"MaxAllowedZone"=dword:00000001
More info here: http://support.microsoft.com/kb/896054
Go to Start
Type regsvr32 hhctrl.ocx
You should get a success message like:
" DllRegisterServer in hhctrl.ocx succeeded "
Now try to open your CHM file again.
other way is to use different third party software. This link shows more third party software to view chm files...
I tried with SumatraPDF and it work fine.
I fixed this programmatically in my software, using C++ Builder.
Before I assign the CHM help file, Application->HelpFile = HelpFileName, I check to see if it contains the "Zone.Identifier" stream, and when it does, I simply remove it.
String ZIStream(HelpFileName + ":Zone.Identifier") ;
if (FileExists(ZIStream))
{ DeleteFile(ZIStream) ; }
There are apparently different levels of authentication. Most articles I read tell you to set the MaxAllowedZone to '1' which means that local machine zone and intranet zone are allowed but '4' allows access for 'all' zones.
For more info, read this article:
https://support.microsoft.com/en-us/kb/892675
This is how my registry looks (I wasn't sure it would work with the wild cards but it seems to work for me):
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions]
"MaxAllowedZone"=dword:00000004
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions]
"UrlAllowList"="\\\\<network_path_root>;\\\\<network_path_root>\*;\\ies-inc.local;http://www.*;http://*;https://www.*;https://*;"
As an additional note, weirdly the "UrlAllowList" key was required to make this work on another PC but not my test one. It's probably not required at all but when I added it, it fixed the problem. The user may have not closed the original file or something like that. So just a consideration. I suggest try the least and test it, then add if needed. Once you confirm, you can deploy if needed. Good Luck!
Edit: P.S. Another method that worked was mapping the path to the network locally by using mklink /d (symbolic linking in Windows 7 or newer) but mapping a network drive letter (Z: for testing) did not work. Just food for thought and I did not have to 'Unblock' any files. Also the accepted 'Solution' did not resolve the issue for me.
Moving to local folder is the quickest solution, nothing else worked for me esp because I was not admin on my system (can't edit registery etc), which is a typical case in a work environment.
Create a folder in C:\help drive, lets call it help and copy the files there and open.
Do not copy to mydocuments or anywhere else, those locations are usually on network drive in office setup and will not work.
I have created a window in gtk+ .in this window i am displaying some text and have button"next" through which i want to move to next window and my previous window should disappear.my new window should display something say,text.
Can someone tell me how to implement this?
I am new to gtk+.
It seems you want to use GtkAssistant, which is a widget precisely for the kind of interaction you are looking for. Run gtk-demo in your system to check the example with the code. It is likely you have it installed.
Also, you can check the code online in Gtk+ repository. (Check the version you want to view, either for GTK+2 or GTK+3).
I will be writing code that takes a screenshot, crops to a small section of the screen (predefined area of screen), and then extracts the text from that cropped image (via OCR tools), and then saves the resulting text to a file. I was wondering if there is software (preferably for Windows) that can do this, or at least parts of it. I am already looking into tesseract as an OCR tool. Anyone know of software that can take the screenshot, and possibly crop a predefined region of the image.
Thanks,
-Jason
I use Greenshot, which is a very awesome tool for screenshots and according to the FAQ it supports OCR (using MODI = Microsoft Office Document Imaging) as well. However, I never got it working on my Windows machine and used Tesseract instead (for Linux, with some scripting experience, this method should be possible as well):
Download Tesseract here for Ubuntu/Debian/Windows and install it.
Download and install Greenshot
Create a new windows batch script called "Greenshot_Tesseract_OCR.bat" using a text editor like notepad or Notepad++ - and save it at a location of your choice, e.g. "C:\Users\MyUser\Scripts\Greenshot_Tesseract_OCR.bat" - with the following content (depending on the installation location of tesseract):
ECHO OFF
set arg1=%1
"C:\Program Files\Tesseract-OCR\tesseract.exe" "%arg1%" "%arg1%"
type "%arg1%.txt" | clip
Right-click the Greenshot icon in the toolbar and click "configure external command"
Add a new command with a name like "Tesseract OCR to Clipboard", select the batch script you just created as a command and as argument, use the default "{0}". Then click OK twice.
You should now be able to copy the text of a screenshot into your clipboard, with a shortcut ("Print" key in my case) and 1-2 mouse clicks (depending on your Greenshot settings)!
You can try the following open-source programs:
Greenshot for screenshots and VietOCR (a GUI frontend for Tesseract) for OCR on screenshots.
I wanted to have a GUI front-end for a script that accepts numerous command-line options, most of them are UNIX paths. So I thought rather than typing them in (even with auto-completion) every time, I'd create a GUI front end which contains text boxes with buttons beside them, which when clicked will invoke the file browser dialogue. Later, I thought I'd extend this to other scripts which would sure require a different set of GUI elements. This made me think if there's any existing app that would let me create a GUI dialog, after parsing some kind of description of the items that I want that window should contain.
I know of programs like Zenity, but I think it's doesn't give me what I want. For example, if I were to use it for the first script, it'll end up flashing sequence of windows in succession rather than getting everything done from a single window.
So, basically I'm looking at some corss-platform program that lets me create a window from a text description, probably XML or the like. Please suggest.
Thanks
Jeenu
Mozilla's XUL is a cross platform application framework - . You could write an app as a Firefox plugin or a standalone XUL application.
mono and monodevelop could work for this. Or even something super simple like shoes.