I've searched all over and tried everything but I still get:
invalid multibyte char (UTF-8)
When doing something like:
some_string.gsub(/…/)
Even though I added this to the top of the file:
# encoding: utf-8
Any help?
Try:
some_string.gsub(/\u2026/)
You can also take a look at this question for more information.
Related
this is my ruby code
require 'json'
a=Array.new
value="¿value"
data=value.gsub('¿','-')
a[0]=data
puts a
puts "json is"
puts jsondata=a.to_json
getting following error
C:\Ruby193>new.rb
C:/Ruby193/New.rb:3: invalid multibyte char (US-ASCII)
C:/Ruby193/New.rb:3: syntax error, unexpected tIDENTIFIER, expecting $end
value="┐value"
^
That's not a JSON problem — Ruby can't decode your source because it contains a multibyte character. By default, Ruby tries to decode files as US-ASCII, but ¿ isn't representable in US-ASCII, so it fails. The solution is to provide a magic comment as described in the documentation. Assuming your source file's encoding is UTF-8, you can tell Ruby that like so:
# encoding: UTF-8
# ...
value = "¿value"
# ...
With an editor or an IDE the soluton of icktoofay (# encoding: UTF-8 - in the first line) is perfect.
In a shell with IRB or PRY it is difficult to find a working configuration. But there is a workaround that at least worked for my encoding problem which was to enter German umlaut characters.
Workaround for PRY:
In PRY I use the edit command to edit the contents of the input buffer
as described in this pry wiki page.
This opens an external editor (you can configure which editor you want). And the editor accepts special characters that can not be entered in PRY directly.
I am trying compile this Ruby code with option --1.9:
\# encoding: utf-8
module Modd
def cpd
#"_¦+?" mySQL
"ñ,B˜"
end
end
I used the GVim editor and compiled then got the following error:
SyntaxError: f3.rb:6: invalid multibyte char (UTF-8)
After that I used Notepad++ and changed to Encode as UTF-8 and compiled with this option:
jruby --1.9 f3.rb
then I get:
SyntaxError: f3.rb:1: \273Invalid char `\273' ('╗') in expression
I have seen this happen when the BOM gets messed up during a charset conversion (the BOM in octal is 357 273 277). If you open the file with a hexadecimal editor (:%!xxd on vi), you will more than likely see characters at the beginning of the file, before the first #.
If you recreate that file directly in utf-8, or get rid of these spurious characters, this should solve your problem.
I have a lot of these code lines:
#breadcrumb = []
#breadcrumb << ["#!", "Hladať"]
It was in ruby ree-1.8, but I can change it to 1.9, but I have this error:
/app/controllers/index_controller.rb:36: syntax error, unexpected $end, expecting ']'
#breadcrumb << ["#!", "Hladať"]
When I delete "ť " and others special chars(ľščťžýáí...) it`s ok, but I need these chars.
Add the "magic comment" specifying the encoding to the top of each Ruby file that has non-ASCII characters:
# encoding: UTF-8
This is not needed in Rails view files provided config.encoding is set properly (the default is UTF-8). You should also read more about Ruby 1.9's encoding behavior.
I'm trying to run a file (ruby anyfile.rb in cmd prompt) with the following contents:
# encoding: utf-8
puts 'áá'
happens the following error:
invalid multibyte char (UTF-8)
It seems that Ruby does not understand the magic comment...
EDIT: If I remove the "# encoding: utf-8" and run the command prompt like this:
ruby-E:UTF-8 encoding.rb
then it works - any ideas?
EDIT2: when i run:
ruby -e 'p [Encoding.default_external, Encoding.default_internal]'
i got [#Encoding:CP850, nil], maybe my Encoding.default_external is wrong?!
Environment:
Windows XP (yes, I also hate windows + ruby)
ruby 1.9.2p180 (2011-02-18) [i386-mingw32]
I believe this is a classic case of "if you hear hooves, think horses, not zebras".
The error message is telling you that you have a byte sequence in your file that is not a valid UTF-8 multibyte sequence.
It is definitely possible that
It seems that Ruby does not understand the magic comment...
as you say, and that up until now nobody noticed that magic comments don't actually work because you are the first person in the history of humankind to actually try to use magic comments. (Actually, this is not possible. If Ruby didn't understand magic comments, it would complain about an invalid ASCII character, since ASCII is the default encoding if no magic comment is present.)
Or, there actually is an invalid multibyte UTF-8 sequence in your file.
Which do you think is more likely? If I were you, I would check my file.
I've encountered similar issues from time to time with files that were not saved as UTF-8, even when the magic comment states so.
I've found that Ruby 1.9.2 had issues to properly convert UTF-8 to codepages 850 and 437, the defaults for command prompt on Windows.
I do recommend you upgrade to Ruby 1.9.3 (latest is patchlevel 125) which solves a lot of encoding issues, specially on Windows.
Also, to verify that your saved file do not contain a Unicode BOM (so it is plain UTF) and is properly saved.
To verify that, you can switch the codepage in the console to unicode (chcp 65001) and try type myscript.rb
You should see the accented letters correctly.
Last but no least, ensure your command prompt uses a TrueType font so extended characters are properly displayed.
Hope that helps.
Try
# encoding: iso-8859-1
Not everything that's text is utf8.
Are you sure you selected 'UTF-8' from the Encoding dropdown when you saved the file in Notepad? I've just tried this on an XP machine and your code example worked for me.
Originally this bug was posted here: https://rails.lighthouseapp.com/projects/8994/tickets/5713-ruby-19-ku-incompatible-with-mem_cache_store
And now, as we've run into the same issue, I'll copy here a question from that issue, hoping someone have an answer already:
When Ruby 1.9 is started in unicode mode (-Ku), mem_cache_store.rb fails to parse:
/usr/local/ruby19/bin/ruby -Ku /usr/local/ruby-1.9.2-p0/lib/ruby/gems/1.9.1/gems/
activesupport-3.0.0/lib/active_support/cache/mem_cache_store.rb
/usr/local/ruby-1.9.2-p0/lib/ruby/gems/1.9.1/gems/activesupport-3.0.0/lib/active_support/
cache/mem_cache_store.rb:32: invalid multibyte escape: /[\x00-\x20%\x7F-\xFF]/
Our case is practically identical: when you set config.action_controller.cache_store to :mem_cache_store, and try to run tests, console, or server, you recieve this in return:
/Users/%username%/.rvm/gems/ruby-1.9.2-p0/gems/activesupport-3.0.1/lib/active_support/
cache/mem_cache_store.rb:32: invalid multibyte escape: /[\x00-\x20%\x7F-\xFF]/
Any ideas how this can be avoided?..
Ruby 1.9 in unicode mode will attempt to interpret the regular expression as unicode. To avoid this you need to pass the regular expression option "n" for "no encoding":
ESCAPE_KEY_CHARS = /[\x00-\x20%\x7F-\xFF]/n
Now we have our raw 8-bit encoding (the only thing Ruby 1.8 speaks) as intended:
ruby-1.9.2-p136 :001 > ESCAPE_KEY_CHARS = /[\x00-\x20%\x7F-\xFF]/n.encoding
=> # <Encoding:ASCII-8BIT>
Hopefully the Rails teams fixes this, for now you have to edit the file.