Escaping piped output between commands - bash

I use the below command to delete changed files sometimes when using hg.
hg status -n | xargs rm
I have come across an problem where if the output of
hg status -n
contains any file paths with spaces in the file will not be found. Usually i would quote or escape spaces in file names but im not sure how to do this with piped output. Any help would be great thanks :)

Tell both commands to use NUL as the delimiter:
hg status -n0 | xargs -0 rm
Also be careful: the -n option will print even files Mercurial doesn't know about.
Maybe you want this instead?
hg status -mn0 | xargs -0 rm
Also, don't forget about hg revert or hg purge. Maybe they do what you want, e.g.
hg revert --all --no-backup
or
.hgrc
[extensions]
hgext.purge=
shell
hg purge

I don't have hg installed. So I will do it with ls:
$ touch 'file A' 'file B'
$ ls -1
file A
file B
$ ls | xargs rm
rm: cannot remove `file': No such file or directory
rm: cannot remove `A': No such file or directory
rm: cannot remove `file': No such file or directory
rm: cannot remove `B': No such file or directory
$ ls | tr '\n' '\0' | xargs -0 rm
$ ls

Let xargs handle that with the -I option:
hg status -n | xargs -I FileName rm FileName
-I increases the safety, but reduces the efficiency as only one filename at a time will be passed to 'rm'
An example:
$ printf "%s\n" one "2 two" "three 3 3" | xargs printf "%s\n"
one
2
two
three
3
3
$ printf "%s\n" one "2 two" "three 3 3" | xargs -I X printf "%s\n" X
one
2 two
three 3 3

Beside -0, newer xargs has option -d which can help you doing such things:
<command returning \n-separated paths> | xargs -d \\n rm -v

Related

Delete corrupt gz archives with "xargs rm"

I would like to pre-process a directory of .gz files before submitting them to Hadoop/Spark. This is to avoid issues, such as these ones. The following bash pipeline almost does what I need, except that xargs rm doesn't seem to delete the files that fail the gunzip -t test.
gunzip -t *.gz 2>&1 | cut -f 2 -d: - | xargs rm
The pipeline works silently. Yet when gunzip -t *.gz is called again, it prints out
gzip: unhappy.gz: unexpected end of file
or similar.
For some reason, it looks as though this only deletes one file, then finishes. A (more complicated) pipeline that invokes xargs twice seems to work much more reliably:
ls *.gz | xargs -n 1 gunzip -t 2>&1 | cut -f 2 -d: - | xargs -t -n 1 rm
Decomposed, this pipeline says:
ls *.gz: list all .gz files
xargs -n 1 gunzip -t 2>&1: send that list one at a time (-n 1) to gunzip -t, to test the input
cut -f 2 -d: -: extract the filename from the output of gunzip, which is the second field (-f 2) of the line delimited by : character
xargs -t -n 1 rm: send the output of cut to rm one filename at a time, printing out progress (-t) as it operates

Making xargs work in Cygwin

Linux/bash, taking the list of lines on input and using xargs to work on each line:
% ls -1 --color=never | xargs -I{} echo {}
a
b
c
Cygwin, take 1:
$ ls -1 --color=never | xargs -I{} echo {}
xargs: invalid option -- I
Usage: xargs [-0prtx] [-e[eof-str]] [-i[replace-str]] [-l[max-lines]]
[-n max-args] [-s max-chars] [-P max-procs] [--null] [--eof[=eof-str]]
[--replace[=replace-str]] [--max-lines[=max-lines]] [--interactive]
[--max-chars=max-chars] [--verbose] [--exit] [--max-procs=max-procs]
[--max-args=max-args] [--no-run-if-empty] [--version] [--help]
[command [initial-arguments]]
Cygwin, take 2:
$ ls -1 --color=never | xargs echo
a b c
(yes, I know there's a universal method of ls -1 --color=never | while read X; do echo ${X}; done, I have tested that it works in Cygwin too, but I'm looking for a way to make xargs work correctly in Cygwin)
damienfrancois's answer is correct. You probably want to use -n to enforce echo to echo one file name at a time.
However, if you are really interested in taking each file and executing it one at a time, you may be better off using find:
$ find . -maxdepth 1 --exec echo {} \;
A few things:
This will pick up file names that begin with a period (including '.')
This will put a ./ in front of your file names.
The echo being used is from /bin/echo and not the built in shell version of echo.
However, it doesn't depend upon the shell executing ls * and possibility causing issues (such as coloring file names, or printing out files in sub-directories (which your command will do).
The purpose of xargs was to minimize the execution of a particular command:
$ find . -type f | xargs foo
In this case, xargs will execute foo only a minimal number of times. foo will only execute when the command line buffer gets full, or there are no more file names. However, if you are forcing an execution after each name, you're probably better off using find. It's a lot more flexible and you're not depending upon shell behavior.
Use the -n argument of xargs, which is really the one you should be using, as -I is an option that serves to give the argument a 'name' so you can make them appear anywhere in the command line:
$ ls -1 --color=never | xargs echo
a b c
$ ls -1 --color=never | xargs -n 1 echo
a
b
c
From the manpage:
-n max-args
Use at most max-args arguments per command line
-I replace-str
Replace occurrences of replace-str in the initial-arguments with names read from standard input.

How to properly form rm with xargs -a?

A coworker showed me a nifty way of using rm and xargs for deleting filenames listed in a .txt - but I can't remember what he did.
I ran
echo | xargs -a file.txt
where file.txt contained
1
2
3
4
And it printed
1 2 3 4
My logic says that
rm | xargs -a file.txt
should delete the files I created titled 1 and 2 and 3 and 4.
But that is not the behavior I get.
How do I form this simple command?
I believe you want:
xargs -a file.txt rm
The last argument to xargs should be the command you want it to run on all of the items in the file.
The solution proposed by Lynch is also valid and equivalent to this one.
Try this command:
xargs rm < file.txt
xargs take every line in input and append it to the command you specify.
so if file.txt contains:
a
b
then xargs will execute rm a b
Unless file.txt is really large, xargs is unnecessary and this is equivalent:
rm $(<file.txt)
and portable (POSIX) too.

how to pipe commands in ubuntu

How do I pipe commands and their results in Ubuntu when writing them in the terminal. I would write the following commands in sequence -
$ ls | grep ab
abc.pdf
cde.pdf
$ cp abc.pdf cde.pdf files/
I would like to pipe the results of the first command into the second command, and write them all in the same line. How do I do that ?
something like
$ cp "ls | grep ab" files/
(the above is a contrived example and can be written as cp *.pdf files/)
Use the following:
cp `ls | grep ab` files/
Well, since the xargs person gave up, I'll offer my xargs solution:
ls | grep ab | xargs echo | while read f; do cp $f files/; done
Of course, this solution suffers from an obvious flaw: files with spaces in them will cause chaos.
An xargs solution without this flaw? Hmm...
ls | grep ab | xargs '-d\n' bash -c 'docp() { cp "$#" files/; }; docp "$#"'
Seems a bit klunky, but it works. Unless you have files with returns in them I mean. However, anyone who does that deserves what they get. Even that is solvable:
find . -mindepth 1 -maxdepth 1 -name '*ab*' -print0 | xargs -0 bash -c 'docp() { cp "$#" files/; }; docp "$#"'
To use xargs, you need to ensure that the filename arguments are the last arguments passed to the cp command. You can accomplish this with the -t option to cp to specify the target directory:
ls | grep ab | xargs cp -t files/
Of course, even though this is a contrived example, you should not parse the output of ls.

Delete all but the most recent X files in bash

Is there a simple way, in a pretty standard UNIX environment with bash, to run a command to delete all but the most recent X files from a directory?
To give a bit more of a concrete example, imagine some cron job writing out a file (say, a log file or a tar-ed up backup) to a directory every hour. I'd like a way to have another cron job running which would remove the oldest files in that directory until there are less than, say, 5.
And just to be clear, there's only one file present, it should never be deleted.
The problems with the existing answers:
inability to handle filenames with embedded spaces or newlines.
in the case of solutions that invoke rm directly on an unquoted command substitution (rm `...`), there's an added risk of unintended globbing.
inability to distinguish between files and directories (i.e., if directories happened to be among the 5 most recently modified filesystem items, you'd effectively retain fewer than 5 files, and applying rm to directories will fail).
wnoise's answer addresses these issues, but the solution is GNU-specific (and quite complex).
Here's a pragmatic, POSIX-compliant solution that comes with only one caveat: it cannot handle filenames with embedded newlines - but I don't consider that a real-world concern for most people.
For the record, here's the explanation for why it's generally not a good idea to parse ls output: http://mywiki.wooledge.org/ParsingLs
ls -tp | grep -v '/$' | tail -n +6 | xargs -I {} rm -- {}
Note: This command operates in the current directory; to target a directory explicitly, use a subshell ((...)) with cd:
(cd /path/to && ls -tp | grep -v '/$' | tail -n +6 | xargs -I {} rm -- {})
The same applies analogously to the commands below.
The above is inefficient, because xargs has to invoke rm separately for each filename.
However, your platform's specific xargs implementation may allow you to solve this problem:
A solution that works with GNU xargs is to use -d '\n', which makes xargs consider each input line a separate argument, yet passes as many arguments as will fit on a command line at once:
ls -tp | grep -v '/$' | tail -n +6 | xargs -d '\n' -r rm --
Note: Option -r (--no-run-if-empty) ensures that rm is not invoked if there's no input.
A solution that works with both GNU xargs and BSD xargs (including on macOS) - though technically still not POSIX-compliant - is to use -0 to handle NUL-separated input, after first translating newlines to NUL (0x0) chars., which also passes (typically) all filenames at once:
ls -tp | grep -v '/$' | tail -n +6 | tr '\n' '\0' | xargs -0 rm --
Explanation:
ls -tp prints the names of filesystem items sorted by how recently they were modified , in descending order (most recently modified items first) (-t), with directories printed with a trailing / to mark them as such (-p).
Note: It is the fact that ls -tp always outputs file / directory names only, not full paths, that necessitates the subshell approach mentioned above for targeting a directory other than the current one ((cd /path/to && ls -tp ...)).
grep -v '/$' then weeds out directories from the resulting listing, by omitting (-v) lines that have a trailing / (/$).
Caveat: Since a symlink that points to a directory is technically not itself a directory, such symlinks will not be excluded.
tail -n +6 skips the first 5 entries in the listing, in effect returning all but the 5 most recently modified files, if any.
Note that in order to exclude N files, N+1 must be passed to tail -n +.
xargs -I {} rm -- {} (and its variations) then invokes on rm on all these files; if there are no matches at all, xargs won't do anything.
xargs -I {} rm -- {} defines placeholder {} that represents each input line as a whole, so rm is then invoked once for each input line, but with filenames with embedded spaces handled correctly.
-- in all cases ensures that any filenames that happen to start with - aren't mistaken for options by rm.
A variation on the original problem, in case the matching files need to be processed individually or collected in a shell array:
# One by one, in a shell loop (POSIX-compliant):
ls -tp | grep -v '/$' | tail -n +6 | while IFS= read -r f; do echo "$f"; done
# One by one, but using a Bash process substitution (<(...),
# so that the variables inside the `while` loop remain in scope:
while IFS= read -r f; do echo "$f"; done < <(ls -tp | grep -v '/$' | tail -n +6)
# Collecting the matches in a Bash *array*:
IFS=$'\n' read -d '' -ra files < <(ls -tp | grep -v '/$' | tail -n +6)
printf '%s\n' "${files[#]}" # print array elements
Remove all but 5 (or whatever number) of the most recent files in a directory.
rm `ls -t | awk 'NR>5'`
(ls -t|head -n 5;ls)|sort|uniq -u|xargs rm
This version supports names with spaces:
(ls -t|head -n 5;ls)|sort|uniq -u|sed -e 's,.*,"&",g'|xargs rm
Simpler variant of thelsdj's answer:
ls -tr | head -n -5 | xargs --no-run-if-empty rm
ls -tr displays all the files, oldest first (-t newest first, -r reverse).
head -n -5 displays all but the 5 last lines (ie the 5 newest files).
xargs rm calls rm for each selected file.
find . -maxdepth 1 -type f -printf '%T# %p\0' | sort -r -z -n | awk 'BEGIN { RS="\0"; ORS="\0"; FS="" } NR > 5 { sub("^[0-9]*(.[0-9]*)? ", ""); print }' | xargs -0 rm -f
Requires GNU find for -printf, and GNU sort for -z, and GNU awk for "\0", and GNU xargs for -0, but handles files with embedded newlines or spaces.
All these answers fail when there are directories in the current directory. Here's something that works:
find . -maxdepth 1 -type f | xargs -x ls -t | awk 'NR>5' | xargs -L1 rm
This:
works when there are directories in the current directory
tries to remove each file even if the previous one couldn't be removed (due to permissions, etc.)
fails safe when the number of files in the current directory is excessive and xargs would normally screw you over (the -x)
doesn't cater for spaces in filenames (perhaps you're using the wrong OS?)
ls -tQ | tail -n+4 | xargs rm
List filenames by modification time, quoting each filename. Exclude first 3 (3 most recent). Remove remaining.
EDIT after helpful comment from mklement0 (thanks!): corrected -n+3 argument, and note this will not work as expected if filenames contain newlines and/or the directory contains subdirectories.
Ignoring newlines is ignoring security and good coding. wnoise had the only good answer. Here is a variation on his that puts the filenames in an array $x
while IFS= read -rd ''; do
x+=("${REPLY#* }");
done < <(find . -maxdepth 1 -printf '%T# %p\0' | sort -r -z -n )
For Linux (GNU tools), an efficient & robust way to keep the n newest files in the current directory while removing the rest:
n=5
find . -maxdepth 1 -type f -printf '%T# %p\0' |
sort -z -nrt ' ' -k1,1 |
sed -z -e "1,${n}d" -e 's/[^ ]* //' |
xargs -0r rm -f
For BSD, find doesn't have the -printf predicate, stat can't output NULL bytes, and sed + awk can't handle NULL-delimited records.
Here's a solution that doesn't support newlines in paths but that safeguards against them by filtering them out:
#!/bin/bash
n=5
find . -maxdepth 1 -type f ! -path $'*\n*' -exec stat -f '%.9Fm %N' {} + |
sort -nrt ' ' -k1,1 |
awk -v n="$n" -F'^[^ ]* ' 'NR > n {printf "%s%c", $2, 0}' |
xargs -0 rm -f
note: I'm using bash because of the $'\n' notation. For sh you can define a variable containing a literal newline and use it instead.
Solution for UNIX & Linux (inspired from AIX/HP-UX/SunOS/BSD/Linux ls -b):
Some platforms don't provide find -printf, nor stat, nor support NUL-delimited records with stat/sort/awk/sed/xargs. That's why using perl is probably the most portable way to tackle the problem, because it is available by default in almost every OS.
I could have written the whole thing in perl but I didn't. I only use it for substituting stat and for encoding-decoding-escaping the filenames. The core logic is the same as the previous solutions and is implemented with POSIX tools.
note: perl's default stat has a resolution of a second, but starting from perl-5.8.9 you can get sub-second resolution with the stat function of the module Time::HiRes (when both the OS and the filesystem support it). That's what I'm using here; if your perl doesn't provide it then you can remove the ‑MTime::HiRes=stat from the command line.
n=5
find . '(' -name '.' -o -prune ')' -type f -exec \
perl -MTime::HiRes=stat -le '
foreach (#ARGV) {
#st = stat($_);
if ( #st > 0 ) {
s/([\\\n])/sprintf( "\\%03o", ord($1) )/ge;
print sprintf( "%.9f %s", $st[9], $_ );
}
else { print STDERR "stat: $_: $!"; }
}
' {} + |
sort -nrt ' ' -k1,1 |
sed -e "1,${n}d" -e 's/[^ ]* //' |
perl -l -ne '
s/\\([0-7]{3})/chr(oct($1))/ge;
s/(["\n])/"\\$1"/g;
print "\"$_\"";
' |
xargs -E '' sh -c '[ "$#" -gt 0 ] && rm -f "$#"' sh
Explanations:
For each file found, the first perl gets the modification time and outputs it along the encoded filename (each newline and backslash characters are replaced with the literals \012 and \134 respectively).
Now each time filename is guaranteed to be single-line, so POSIX sort and sed can safely work with this stream.
The second perl decodes the filenames and escapes them for POSIX xargs.
Lastly, xargs calls rm for deleting the files. The sh command is a trick that prevents xargs from running rm when there's no files to delete.
I realize this is an old thread, but maybe someone will benefit from this. This command will find files in the current directory :
for F in $(find . -maxdepth 1 -type f -name "*_srv_logs_*.tar.gz" -printf '%T# %p\n' | sort -r -z -n | tail -n+5 | awk '{ print $2; }'); do rm $F; done
This is a little more robust than some of the previous answers as it allows to limit your search domain to files matching expressions. First, find files matching whatever conditions you want. Print those files with the timestamps next to them.
find . -maxdepth 1 -type f -name "*_srv_logs_*.tar.gz" -printf '%T# %p\n'
Next, sort them by the timestamps:
sort -r -z -n
Then, knock off the 4 most recent files from the list:
tail -n+5
Grab the 2nd column (the filename, not the timestamp):
awk '{ print $2; }'
And then wrap that whole thing up into a for statement:
for F in $(); do rm $F; done
This may be a more verbose command, but I had much better luck being able to target conditional files and execute more complex commands against them.
If the filenames don't have spaces, this will work:
ls -C1 -t| awk 'NR>5'|xargs rm
If the filenames do have spaces, something like
ls -C1 -t | awk 'NR>5' | sed -e "s/^/rm '/" -e "s/$/'/" | sh
Basic logic:
get a listing of the files in time order, one column
get all but the first 5 (n=5 for this example)
first version: send those to rm
second version: gen a script that will remove them properly
With zsh
Assuming you don't care about present directories and you will not have more than 999 files (choose a bigger number if you want, or create a while loop).
[ 6 -le `ls *(.)|wc -l` ] && rm *(.om[6,999])
In *(.om[6,999]), the . means files, the o means sort order up, the m means by date of modification (put a for access time or c for inode change), the [6,999] chooses a range of file, so doesn't rm the 5 first.
Adaptation of #mklement0's excellent answer with some parameters and without needing to navigate to the folder containing the files to be deleted...
TARGET_FOLDER="/my/folder/path"
FILES_KEEP=5
ls -tp "$TARGET_FOLDER"**/* | grep -v '/$' | tail -n +$((FILES_KEEP+1)) | xargs -d '\n' -r rm --
[Ref(s).: https://stackoverflow.com/a/3572628/3223785 ]
Thanks! 😉
found interesting cmd in Sed-Onliners - Delete last 3 lines - fnd it perfect for another way to skin the cat (okay not) but idea:
#!/bin/bash
# sed cmd chng #2 to value file wish to retain
cd /opt/depot
ls -1 MyMintFiles*.zip > BigList
sed -n -e :a -e '1,2!{P;N;D;};N;ba' BigList > DeList
for i in `cat DeList`
do
echo "Deleted $i"
rm -f $i
#echo "File(s) gonzo "
#read junk
done
exit 0
Removes all but the 10 latest (most recents) files
ls -t1 | head -n $(echo $(ls -1 | wc -l) - 10 | bc) | xargs rm
If less than 10 files no file is removed and you will have :
error head: illegal line count -- 0
To count files with bash
I needed an elegant solution for the busybox (router), all xargs or array solutions were useless to me - no such command available there. find and mtime is not the proper answer as we are talking about 10 items and not necessarily 10 days. Espo's answer was the shortest and cleanest and likely the most unversal one.
Error with spaces and when no files are to be deleted are both simply solved the standard way:
rm "$(ls -td *.tar | awk 'NR>7')" 2>&-
Bit more educational version: We can do it all if we use awk differently. Normally, I use this method to pass (return) variables from the awk to the sh. As we read all the time that can not be done, I beg to differ: here is the method.
Example for .tar files with no problem regarding the spaces in the filename. To test, replace "rm" with the "ls".
eval $(ls -td *.tar | awk 'NR>7 { print "rm \"" $0 "\""}')
Explanation:
ls -td *.tar lists all .tar files sorted by the time. To apply to all the files in the current folder, remove the "d *.tar" part
awk 'NR>7... skips the first 7 lines
print "rm \"" $0 "\"" constructs a line: rm "file name"
eval executes it
Since we are using rm, I would not use the above command in a script! Wiser usage is:
(cd /FolderToDeleteWithin && eval $(ls -td *.tar | awk 'NR>7 { print "rm \"" $0 "\""}'))
In the case of using ls -t command will not do any harm on such silly examples as: touch 'foo " bar' and touch 'hello * world'. Not that we ever create files with such names in real life!
Sidenote. If we wanted to pass a variable to the sh this way, we would simply modify the print (simple form, no spaces tolerated):
print "VarName="$1
to set the variable VarName to the value of $1. Multiple variables can be created in one go. This VarName becomes a normal sh variable and can be normally used in a script or shell afterwards. So, to create variables with awk and give them back to the shell:
eval $(ls -td *.tar | awk 'NR>7 { print "VarName=\""$1"\"" }'); echo "$VarName"
leaveCount=5
fileCount=$(ls -1 *.log | wc -l)
tailCount=$((fileCount - leaveCount))
# avoid negative tail argument
[[ $tailCount < 0 ]] && tailCount=0
ls -t *.log | tail -$tailCount | xargs rm -f
I made this into a bash shell script. Usage: keep NUM DIR where NUM is the number of files to keep and DIR is the directory to scrub.
#!/bin/bash
# Keep last N files by date.
# Usage: keep NUMBER DIRECTORY
echo ""
if [ $# -lt 2 ]; then
echo "Usage: $0 NUMFILES DIR"
echo "Keep last N newest files."
exit 1
fi
if [ ! -e $2 ]; then
echo "ERROR: directory '$1' does not exist"
exit 1
fi
if [ ! -d $2 ]; then
echo "ERROR: '$1' is not a directory"
exit 1
fi
pushd $2 > /dev/null
ls -tp | grep -v '/' | tail -n +"$1" | xargs -I {} rm -- {}
popd > /dev/null
echo "Done. Kept $1 most recent files in $2."
ls $2|wc -l
Modified version of the answer of #Fabien if you want to specify a path. Useful if you're running the script elsewhere.
ls -tr /path/foo/ | head -n -5 | xargs -I% --no-run-if-empty rm /path/foo/%

Resources