I have a program which I am working on my Dell Laptop XPS 502X. At work, I usually have another monitor plugged in my DVI port and everything is fine. When I work from home, I only have the laptop screen. When I start the program in VS2010, it is very slow and I notice in the bottom of the screen Loading symbols for ...\NVIDIA Corporation\coprocmanager\detourel.dll... which takes around 10-20 seconds every time. Any idea on why this is happening ?
EDIT:
I thought it was a drivers problem, but now it happens again.
I tried the ideas posted in similar questions
-DeleteAllBreakpoints stuff, didn't work.
-No remote symbols fetch or network path
-Enabled Just My Code
Looks like a hook DLL injected by the graphics drivers... driving me crazy!
EDIT 2:
The problem happens on and off, today everything seems find, yesterday, I even noticed it was slow loading the GROOVEEX.dll while the program was running when I was starting a CFileDialog. So it might not just be something related to the graphics drivers.
It looks like nVidia's use of the Detours library from Microsoft. Hopefully this will help...
http://forums.nvidia.com/index.php?showtopic=212704
and
http://research.microsoft.com/en-us/projects/detours/
Run the msconfig tool that is built into Windows to take a look at some of the things that nVidia launches at startup. You may want to try disabling some of the startup items temporarily, but you'll want to research what each item you disable is before doing so, or you may have to go into safe mode to get back to a good state.
Related
I have a real problem, that started from yesterday. I was using my Dell Laptop until I found something called sc, after making my laptop on sleep mode, I tried to get out some piece that I discovered it was for ssd, when I returned it correctly and tried to turn on my laptop again, it showed me the blue screen with a stop code : >"inaccessible boot device".
after a day, I tried to open it again, but nothing happened, I tried alot, searching the internet about the matter but nothing. I also asked someone I know and he told me that ghe laptop needs some format.
Please, Help me finding a solution, because I don't want to format, lots of informations and apps are installed in it, also, there are lots of projects I finished and there is a very important project I am working on, please, help me find a solution without format, and thanks.
I have a new Win10 laptop. I've installed lots of software, including a 25-year-old Codewright editor that I've customized up the wazoo, and that I've been installing on all my machines for, well, 25 years. After working for a few days, it suddenly stopped, and reinstalling it didn't fix it. On startup, it puts up a small splash window, and normally opens the main window a half a second later (that took more than 5 seconds 25 years ago). It's not using any CPU, and there's nothing I can do but kill the process.
In the past, I've occasionally got my system into a state where Codewright would hang on loading, due to some other program that hadn't terminated correctly, and it was unfrozen by killing off that other process. So that's reason to believe that Codewright is waiting at some global lock which some other malfunctioning software is holding. So I have two questions:
Does this ring a bell? Is there some known failure mode where a program putting up a splash window then switching to another window can be prevented by something else going on the system?
Is there a way to diagnose this, perhaps by finding out what system call it's hanging inside? I tried dtrace.exe, started Codewright, and then stopped tracing, and it produced a 3GB XML file, which is quite a haystack. There's a way to filter it by PID, but since this is a startup problem, I have no idea what the PID will be. Is there a better tool for doing this, or some more appropriate dtrace feature that I missed?
The comment about using the Task Manager to create a dump file actually led me to notice that there is an Analyze Wait Chain function there that I had never seen before, since I haven't used Task Manager much since I switched from Win7. This gave me exactly the answer I wanted. My editor was waiting for something that was being held by some NVIDIA GeForce Experience module. Since I don't use that, I uninstalled it, and I'm back up and running. Thanks for the tip.
I have a VB6 application that I provide support for. This application works on both Windows XP and Windows 7. Some users were migrated from Windows XP to Windows 7 using the User State Migration tool. These users now receive a generic "Application has crashed" Windows error message when they open certain screens (forms) in the application. My assumption is that there is a missing dll/ocx reference, but I'm having trouble tracking it down.
I've tried many/varied troubleshooting techniques:
Full uninstall and reinstall of my application
Manually re-registering all dll's and ocx's that I know are used
Running Process Monitor on a broken computer and a working computer to compare what dll's and ocx's are accessed. The answer might be here but even after filtering out most of the background noise the amount of data is overwhelming. At a minimum I reviewed all of the calls right before it crashes and all of the calls that were not successful. All of the non-successful calls match between working and non-working.
Installed the Windows Debugger Tools and captured a crash dump. Analyzed the crash dump with DebugDiag. DebugDiag says the exception is in msvbvm60.dll. I tried building a PDB file for my exe and loading it in DebugDiag to get more detail about where the exception is occuring but DebugDiag doesn't want to accept the PDB (might be doing something wrong here, but it just seems to ignore it. This same PDB file works fine when I do remote debugging, however.)
I recompiled my VB6 program without any optimizations in PCode. I've read online that sometimes building in PCode, while bad for performance, will tell you the real exception.
Used the above created PDB file to remote debug the VB6 application. The debugger says that the application crashes after the new window has been created, on a line that sets MousePointer = vbHourGlass... To me it seems unlikely that this is the real cause of the error. There are at least 20 other locations in the program where this same line is called and all work fine.
(Forgot about this one)
Used Dependency Walker and profiled the application on both a working and non-working computer. All errors found by dependency walker were the same between the two computers. There were no additional dependencies found on a working computer, and all missing dependencies on the non-working computer were also missing on the working one.
None of these actions changed my error message or showed me what the error is (unless it really is the mouse cursor issue)... There are no entries in the Windows Event Log related to the app crash.
The non-working and working computers all have the same base Windows 7 image, the only difference is whatever is being changed by USMT, which further convinces me that this is some kind of quirky configuration change or a missing dll/ocx or perhaps an unregistered dll/ocx.
Any ideas or thoughts on how I can track down the root cause of the issue would be greatly appreciated.
Update 1 - Response to questions
#MarkHall I have tried running it as admin, though not with UAC off. The application runs fine on a Windows 7 box as a non-admin with full UAC. Windows XP was 32-bit, Windows 7 is 64-bit, but again it works just fine on a like for like box where the user was not migrated from Windows XP.
#Beaner It's possible that it stores settings somewhere that have been corrupted, but the remote debugging leads me to think that it's more likely something else since it seems to die on a step related to the UI, which then makes me think it's probably a missing dll/ocx reference.
#Bob77 The application is installed into Program Files (x86). While many of the libraries do reside in the same folder, they are all registered.
Peter, often I've noticed that the debugger will indicate a line of code that is actually incorrect, depending on WHERE in the actual assembly language the fault occurs. You should look REAL close around your statement that sets the cursor to vbHourGlass. Your exception is PROBABLY happening BEFORE that line of code, but that line is what the debugger thinks is the actual faulted line of code.
Since you said it happens when a window OPENS, I'd look real close at any ocx's you may have referenced on the form, but perhaps NOT actually being used, or called. You might have one there that you don't intend to be there, that could be causing security issues, or something on Win7? Edit the .frm file by hand if you have to, and look at all the GUIDs the form references.
It is possible that one machine is using PER-USER registration, and the other is using PER-SYSTEM registration?? I don't know...
I would take a much closer look at the form that you are trying to open, and be VERY cautious of everything you are doing in the form load events, and so on. This sounds like it could be something as stupid as Windows Aero being enabled on one system, and not another, or some other sort of "Theme" setting that is throwing the VB Form Rendering routine into a hissyfit... Perhaps even something as stupid as a transparent color index in the icon you selected for that from?
If you are still developing this app, (or at least maintaining it), create an entirely NEW form, and re-create all the controls, etc, on the form (resist the temptation to copy/paste them from the old one...), and then see if THAT does the trick. Then, copy all the event code to the new form one event at a time, with at LEAST enough event code to make the form function, even if it's just a "dead form", that loads no data, or whatever the form is supposed to do. Check and debug after each change, and you WILL find it eventually. Of course, make sure you isolate one of the defunct systems to have a platform that you can duplicate the issue on, or then it's just guessing. I find that using something like Acronis w/ Universal Restore is a great option to then take the image file into a good HV, like VirtualBox, and then restore that image as a VM, so you can debug without interfering with your actual users. This sounds like a lot of work, but then again, so is re-writing an application that already exists, right? :)
Failing THAT... /* and */ are your friends!! (Well, we're dealing with VB, so ' would be your best friend! heh... But I'd start commenting out all the code on the form until that sucker opens. Then once it opens, start putting one line back at a time, and re-running it... That's called "VooDoo Debugging", but sometimes, you gotta do what you gotta do...
THANKS A LOT PETER! :) Now you got ME so involved in this, I feel like I'M the one debugging this sucker! Like if it was MY code I was trying to fix! :)
Let me know if any of this helps... I am actually quite interested in what you discover.
I have a program that I run on multiple network PCs. When I compiled the most recent version, it runs extremely slowly on 2 PCs on the network, but runs fine for everyone else.
This used to happen with my old dev PC when I had an additional 2gb RAM installed. When I would remove the additional 2gb and recompile, it would then work fine for everyone.
Now, I am on a completely new machine and am having the same issue. I've tried to rebuild the project after rebooting, but still have the same issue.
For all other PCs, the program loads in about 3-5 seconds. On these 2 PCs, it takes anywhere from 45 seconds to 1.5 mins to load...
One of the PCs is an older Dell Dimension 8200, but the other is a newer OptiPlex that is identical to several other PCs on the network, so this is what is really making it so confusing.
For now, I've had to revert to the old version so it will run correctly for everyone.
Does anyone have any idea of anything to try?
Thanks in advance!!!
Edit:
Ok, it was an exhausting day yesterday trying various things to solve this issue. Here is what I tried and where the problem begins:
Using the new program
Went back to old versions of all updated components, but still had the same issue
Using the old program
I decided to go back to the drawing board and start from the old version of the application and incrementally add the new features a small piece at a time.
Recompiled the old version using the old components - program works fine
Updated to new DevExpress components - program works fine
Updated to new ESBPCS components - program works fine
Updated to new DeepSoftware components - program works fine
Ok, so now we know there is nothing with the component sets I've updated...
Added 1 image to each of 2 image lists - program works fine
Added new database table - program works fine
Added code to open and close the new table - program works fine
Added new action to action list and added a menu item and toolbar button to new action (action does nothing at this point) - program works fine
Added a new BLANK form to the application and added code to open the new form - BAM!!!
So, adding just one form to the application is what's causing the issue! I removed all the code for the opening of the form, commented out the uses clauses and removed the uses entry from the project source and everything is back to normal!
Anybody have any idea about this?
Thanks!
Edit 2:
For #Warren P - here is my .DPR source:
program Scheduler;
uses
ExceptionLog,
Forms,
SchedulerMainUnit in 'SchedulerMainUnit.pas' {FrmMain},
SchedulerDBInfoUnit in 'SchedulerDBInfoUnit.pas' {FrmDBInfo},
SchedulerHistoryUnit in 'SchedulerHistoryUnit.pas' {FrmHistory},
SchedulerOptionsUnit in 'SchedulerOptionsUnit.pas' {FrmOptions},
SchedulerExtVersionUnit in 'SchedulerExtVersionUnit.pas' {FrmExtVersion},
SchedulerSplashUnit in 'SchedulerSplashUnit.pas' {FrmSplash},
SchedulerInfoUnit in 'SchedulerInfoUnit.pas' {FrmInfo},
SchedulerShippedUnit in 'SchedulerShippedUnit.pas' {FrmShipped}; {<-- This is the new form with the issue}
{$R *.res}
begin
Application.Initialize;
Application.Title := 'SmartWool WIP Scheduling Assistant';
Application.CreateForm(TFrmMain, FrmMain);
Application.CreateForm(TFrmDBInfo, FrmDBInfo);
Application.CreateForm(TFrmHistory, FrmHistory);
Application.CreateForm(TFrmOptions, FrmOptions);
Application.CreateForm(TFrmExtVersion, FrmExtVersion);
Application.Run;
end.
And here is the intialization section of the main form to create the splash:
initialization
FrmSplash:=TFrmSplash.Create(Application);
FrmSplash.Show;
FrmSplash.Refresh;
Edit 3:
Anybody??? Please?
It could be that the program is waiting for timeouts when trying to access resources that are not available on that machine such as network drives or Internet hosts.
Try running Process Monitor when starting up your program and look for file open calls. Filter the output so it only shows your process.
http://technet.microsoft.com/en-us/sysinternals/bb896645
Performance problems initially can seem very daunting at first.
I have been on many teams where people have tried to guess at a reason for performance problems. This sometimes works, but is far less effective than actually measuring the code.
When reproducible on a development machine, I would recommend a profiler.
There was a previous question that asked about
Delphi Profiling tools which has several possible tools you could use.
When you can't reproduce the problem on your development machine, then it becomes a bit more difficult, but not impossible. Typically I have found that problems are related to an application dependency that is different, and not performing well. Understanding the external influences on your application can help pinpoint the problem.
Specifically common external problems in some of my applications.
Network
Database
Application Servers
Installation or Data File Location (i.e. Disk Performance)
Virus and Malware Scanners
Other application interring with yours such as a virus.
To monitor for items related to the network (i.e. Database, web services, etc...)
I typically use Wireshark which allows me to see if resources are responding in expected times. My most common problem is poor performing DNS and can found using Wireshark.
You can use the AutoRuns program to determine everything that starts up when your computer does, it's useful in determine differences between machines.
But most of all I have logging that can be turned on in my applications and this allows me to isolate the problem to a specific area of code. This narrowing down to a specific section of code reduces the guessing, and allows you to focus on a few possible problems.
I created a log function for this that I call at specific places (in your case especially during startup). It adds a timestamp to each log text and stores them in a TMemo that is regularly saved. Not only very helpful when debugging, but may also shed some light on your problem.
Are you using code signing - ie Microsoft Authenticode? If so, then outdated certificate authorities on the computers can cause significant delays to startup.
First, I would try to defragment the hard disk. If still slow, I would check the power supply. Maybe your hard disk are getting insufficient energy.
Check if there is the same antivirus software on those 2 problematic computers. If so, then your Delphi application may match byte pattern used in some virus made in Delphi. Update virus definitions to solve it, or report false alarm to antivirus company, or change antivirus software.
Check if there isn't any printer installed on those 2 problematic computers. If it is so, then add any printer and try again.
Idea 1:
One reason I have seen for very slow application load time, is when printing or reporting system components like Developer Express Express Print, are in your application.
The problem I saw when using Developer Express Printing components, is that I had an offline or non-responsive network printer in my list of printers (check the control panel printer icon) that was not responding. Some of those Developer Express components seem to read some information from each printer you have installed, and the solution was to go to those clients, and delete old printers from their control panel, that were no longer being used. Each not-responding network printer added up to 60 seconds for a TCP Timeout, to the startup time of my application.
Update - Idea 2:
Download MS DebugView and install it on the machine that runs slowly. Now go back to your main development PC, open the IDE, open your main project file (right click on the project, view project source in project viewer), this will show you the contents of your main project source file (.dpr). go to the main begin....end. block. Now set a breakpoint on the main begin statement, and single step INTO (not OVER) and you will see all the module initialization sections. In each one add this: OutputDebugString('ModuleName').
Now when you run this inside the Delphi Ide you will see messages, and see how far apart they come in, and understand what is taking a long time to initialize. Instead of installing the delphi ide onto the machine that runs slowly, Debug View (which is less than 400kb single executable) will be run, and it will show you these debug messages, along with a nice time display (##.# seconds) for each message.
MS Debug view is here.
Are you allowing the forms to be constructed on initialization within the DPR source? If so, you may do well to consider whether or not you want those forms sucking up memory the entire time, more-over if you want those forms to be wasting the application's time on load.
A rule of thumb: If the form is used a LOT during the application's execution, allow it to be constructed when the application loads (this will work out faster over-all than constructing the instance "on-demand").
If the form is not used very often at all (for example, a Dialog or an About Box), delete the "Application.CreateForm" line from the DPR source, and instead construct your instance on request...
var
LForm: TfrmAbout;
begin
Application.CreateForm(LForm, TfrmAbout);
try
LForm.ShowModal;
finally
LForm.Free;
end;
end;
Now that form (which may not even be displayed during the program's execution) is not sucking up system resources, and will not slow down the application's load time.
It may not solve your problem 100%, but it should certainly help!
I need to run some code when my computer resumes from hibernate (even before I logon). The laptop I am using has a bizzare problem. If I have an external monitor connected to it while resuming from hibernate the laptop chooses the external display as the main video device and the laptop screen remains blank. This becomes more frustrating when sometimes both displays remain blank indefinitely.
I am thinking of writing some code to switch the active display back to the laptop screen when the computer resumes from hibernate. But which windows event do I need to look for to begin with?
The built in hot keys for switching the display have also stopped working. I have reinstalled the OS several times by now and things go smoothly for a few days after that and then its back to square one.
This article on CodeProject discusses the various Windows messages that relate to power saving events.
I think most laptops have issues with that. It is not something they seem to be able to solve in the drivers/ACPI BIOS.
I know Linux allows you to modify the ACPI tables, but I cannot remember if this is possible on Windows.
A Google should provide links to tools you can use to inspect your laptop's ACPI tables in Windows (MS tools IIRC).