If UTF-8 is 8 bits, does it not mean that there can be only maximum of 256 different characters?
The first 128 code points are the same as in ASCII. But it says UTF-8 can support up to million of characters?
How does this work?
UTF-8 does not use one byte all the time, it's 1 to 4 bytes.
The first 128 characters (US-ASCII) need one byte.
The next 1,920 characters need two bytes to encode. This covers the remainder of almost all Latin alphabets, and also Greek, Cyrillic, Coptic, Armenian, Hebrew, Arabic, Syriac and Tāna alphabets, as well as Combining Diacritical Marks.
Three bytes are needed for characters in the rest of the Basic Multilingual Plane, which contains virtually all characters in common use[12] including most Chinese, Japanese and Korean [CJK] characters.
Four bytes are needed for characters in the other planes of Unicode, which include less common CJK characters, various historic scripts, mathematical symbols, and emoji (pictographic symbols).
source: Wikipedia
UTF-8 uses 1-4 bytes per character: one byte for ascii characters (the first 128 unicode values are the same as ascii). But that only requires 7 bits. If the highest ("sign") bit is set, this indicates the start of a multi-byte sequence; the number of consecutive high bits set indicates the number of bytes, then a 0, and the remaining bits contribute to the value. For the other bytes, the highest two bits will be 1 and 0 and the remaining 6 bits are for the value.
So a four byte sequence would begin with 11110... (and ... = three bits for the value) then three bytes with 6 bits each for the value, yielding a 21 bit value. 2^21 exceeds the number of unicode characters, so all of unicode can be expressed in UTF8.
Unicode vs UTF-8
Unicode resolves code points to characters. UTF-8 is a storage mechanism for Unicode. Unicode has a spec. UTF-8 has a spec. They both have different limits. UTF-8 has a different upwards-bound.
Unicode
Unicode is designated with "planes." Each plane carries 216 code points. There are 17 Planes in Unicode. For a total of 17 * 2^16 code points. The first plane, plane 0 or the BMP, is special in the weight of what it carries.
Rather than explain all the nuances, let me just quote the above article on planes.
The 17 planes can accommodate 1,114,112 code points. Of these, 2,048 are surrogates, 66 are non-characters, and 137,468 are reserved for private use, leaving 974,530 for public assignment.
UTF-8
Now let's go back to the article linked above,
The encoding scheme used by UTF-8 was designed with a much larger limit of 231 code points (32,768 planes), and can encode 221 code points (32 planes) even if limited to 4 bytes.[3] Since Unicode limits the code points to the 17 planes that can be encoded by UTF-16, code points above 0x10FFFF are invalid in UTF-8 and UTF-32.
So you can see that you can put stuff into UTF-8 that isn't valid Unicode. Why? Because UTF-8 accommodates code points that Unicode doesn't even support.
UTF-8, even with a four byte limitation, supports 221 code points, which is far more than 17 * 2^16
According to this table* UTF-8 should support:
231 = 2,147,483,648 characters
However, RFC 3629 restricted the possible values, so now we're capped at 4 bytes, which gives us
221 = 2,097,152 characters
Note that a good chunk of those characters are "reserved" for custom use, which is actually pretty handy for icon-fonts.
* Wikipedia used show a table with 6 bytes -- they've since updated the article.
2017-07-11: Corrected for double-counting the same code point encoded with multiple bytes
2,164,864 “characters” can be potentially coded by UTF-8.
This number is 27 + 211 + 216 + 221, which comes from the way the encoding works:
1-byte chars have 7 bits for encoding
0xxxxxxx (0x00-0x7F)
2-byte chars have 11 bits for encoding
110xxxxx 10xxxxxx (0xC0-0xDF for the first byte; 0x80-0xBF for the second)
3-byte chars have 16 bits for encoding
1110xxxx 10xxxxxx 10xxxxxx (0xE0-0xEF for the first byte; 0x80-0xBF for continuation bytes)
4-byte chars have 21 bits for encoding
11110xxx 10xxxxxx 10xxxxxx 10xxxxxx (0xF0-0xF7 for the first byte; 0x80-0xBF for continuation bytes)
As you can see this is significantly larger than current Unicode (1,112,064 characters).
UPDATE
My initial calculation is wrong because it doesn't consider additional rules. See comments to this answer for more details.
UTF-8 is a variable length encoding with a minimum of 8 bits per character.
Characters with higher code points will take up to 32 bits.
Quote from Wikipedia: "UTF-8 encodes each of the 1,112,064 code points in the Unicode character set using one to four 8-bit bytes (termed "octets" in the Unicode Standard)."
Some links:
http://www.utf-8.com/
http://www.joelonsoftware.com/articles/Unicode.html
http://www.icu-project.org/docs/papers/forms_of_unicode/
http://en.wikipedia.org/wiki/UTF-8
Check out the Unicode Standard and related information, such as their FAQ entry, UTF-8 UTF-16, UTF-32 & BOM. It’s not that smooth sailing, but it’s authoritative information, and much of what you might read about UTF-8 elsewhere is questionable.
The “8” in “UTF-8” relates to the length of code units in bits. Code units are entities use to encode characters, not necessarily as a simple one-to-one mapping. UTF-8 uses a variable number of code units to encode a character.
The collection of characters that can be encoded in UTF-8 is exactly the same as for UTF-16 or UTF-32, namely all Unicode characters. They all encode the entire Unicode coding space, which even includes noncharacters and unassigned code points.
While I agree with mpen on the current maximum UTF-8 codes (2,164,864) (listed below, I couldn't comment on his), he is off by 2 levels if you remove the 2 major restrictions of UTF-8: only 4 bytes limit and codes 254 and 255 can not be used (he only removed the 4 byte limit).
Starting code 254 follows the basic arrangement of starting bits (multi-bit flag set to 1, a count of 6 1's, and terminal 0, no spare bits) giving you 6 additional bytes to work with (6 10xxxxxx groups, an additional 2^36 codes).
Starting code 255 doesn't exactly follow the basic setup, no terminal 0 but all bits are used, giving you 7 additional bytes (multi-bit flag set to 1, a count of 7 1's, and no terminal 0 because all bits are used; 7 10xxxxxx groups, an additional 2^42 codes).
Adding these in gives a final maximum presentable character set of 4,468,982,745,216. This is more than all characters in current use, old or dead languages, and any believed lost languages. Angelic or Celestial script anyone?
Also there are single byte codes that are overlooked/ignored in the UTF-8 standard in addition to 254 and 255: 128-191, and a few others. Some are used locally by the keyboard, example code 128 is usually a deleting backspace. The other starting codes (and associated ranges) are invalid for one or more reasons (https://en.wikipedia.org/wiki/UTF-8#Invalid_byte_sequences).
Unicode is firmly married to UTF-8. Unicode specifically supports 2^21 code points (2,097,152 characters) which is exactly the same number of code points supported by UTF-8. Both systems reserve the same 'dead' space and restricted zones for code points etc. ...as of June 2018 the most recent version, Unicode 11.0, contains a repertoire of 137,439 characters
From the unicode standard. Unicode FAQ
The Unicode Standard encodes characters in the range U+0000..U+10FFFF,
which amounts to a 21-bit code space.
From the UTF-8 Wikipedia page. UTF-8 Description
Since the restriction of the Unicode code-space to 21-bit values in
2003, UTF-8 is defined to encode code points in one to four bytes, ...
Related
I have a strange validation program that validates wheather a utf-8 string is a valid host name(Zend Framework Hostname valdiator in PHP). It allows IDNs(internationalized domain names). It will compare each subdomain with sets of characters defined by their HEX bytes representation. Two such sets are D800-DB7F and DC00-DFFF. Php regexp comparing function called preg_match fails during these comparsions and it says that DC00-DFFF characters are not allowed in this function. From wikipedia I learned these bytes are called surrogate characters in UTF-8. What are thay and which characters they actually correspond to? I read in several places I still don't understand what they are.
What are surrogate characters in UTF-8?
This is almost like a trick question.
Approximate answer #1: 4 bytes (if paired and encoded in UTF-8).
Approximate answer #2: Invalid (if not paired).
Approximate answer #3: It's not UTF-8; It's Modified UTF-8.
Synopsis: The term doesn't apply to UTF-8.
Unicode codepoints have a range that needs 21 bits of data.
UTF-16 code units are 16 bits. UTF-16 encodes some ranges of Unicode codepoints as one code unit and others as pairs of two code units, the first from a "high" range, the second from a "low" range. Unicode reserves the codepoints that match the ranges of the high and low pairs as invalid. They are sometimes called surrogates but they are not characters. They don't mean anything by themselves.
UTF-8 code units are 8 bits. UTF-8 encodes several distinct ranges of codepoints in one to four code units, respectively.
#1 It happens that the codepoints that UTF-16 encodes with two 16-bit code units, UTF-8 encodes with 4 8-bit code units, and vice versa.
#2 You can apply the UTF-8 encoding algorithm to the invalid codepoints, which is invalid. They can't be decoded to a valid codepoint. A compliant reader would throw an exception or throw out the bytes and insert a replacement character (�).
#3 Java provides a way of implementing functions in external code with a system called JNI. The Java String API provides access to String and char as UTF-16 code units. In certain places in JNI, presumably as a convenience, string values are modified UTF-8. Modified UTF-8 is the UTF-8 encoding algorithm applied to UTF-16 code units instead of Unicode codepoints.
Regardless, the fundamental rule of character encodings is to read with the encoding that was used to write. If any sequence of bytes is to be considered text, you must know the encoding; Otherwise, you have data loss.
If ASCII uses 7 bits to represent characters. Could someone explain what this means towards the number of characters that are supported. How would that change if ASCII used 12 bits per character?
A bit has two possible states. A group of n bits has 2n possible states.
Therefore 7 bits can represent 27 = 128 possible characters and 12 bits can represent 212 = 4096 possible characters.
This abridged excerpt from Wikipedia's table of character sets provides historical perspective:
BCDIC 1928 6 bits Introduced with
the IBM card
FIELDATA 1956 6/7 Battlefield
bits information (USA)
EBCDIC 1963 8 bits IBM computers
Teleprinters and
computers;
ASCII 1963-06-17 7 bits original
(ASA X3.4-1963) definition of
ASCII
ECMA-6 1965-04-30 7 bits ASCII localization
ISO 646 1967 (ISO/R646-1967) 7 bits ASCII localization
1967 (USAS Close to "modern"
ASCII X3.4-1967) 7 bits definition of
ASCII
IBM data
Braille ASCII 1969 6/7 Tactile print for
bits blind persons
Terminal text
ECMA-48 1972 7 bits manipulation and
colors
ISO/IEC 8859 1987 8 bits International
codes
Unified encoding
Unicode 1991 16/32 for most of the
bits world's writing
systems
A 12 bit code can support 2 to the twelve or 4096 characters, minus one or two for non-characters like null, maybe escape, and a few whitespace characters.
Now you could construct a computer with 12 bit bytes. But it would be an expensive re-engineering operation. Most computers have 8 bit bytes, at least partly because of ascii.
But the method chosen to extend ascii was Unicode, and the encoding that is emerging as standard is UTF-8 This is a superset of ascii in a sense - ascii is unicode. The unused top bit is set and additional bytes added to generate extended non-Latin characters. So it is variable width encoding, the codes are always a multiple of 8 bits, and its slightly open ended in that it is possible to add codes at the top of the range, but currently encoding never goes wider than four bytes.
I'm still confused about the bits and bytes although I've been searching through the internet. Is that one character of ASCII = 1 bytes = 8 bits? So 8 bits have 256 unique pattern that covered all the ASCII code, what form is it stored in our computer?
And if I typed "Hello" does that mean this consists of 5 bytes?
Yes to everything you wrote. "Bit" is a binary digit: a 0 or a 1. Historically there existed bytes of smaller sizes; now "byte" only ever means "8 bits of information", or a number between 0 and 255.
No. ASCII is a character set with 128 codepoints stored as the values 0-127. Modern computers predominantly address 8-bit memory and disk locations so a 7-bit ASCII value takes up 8 bits.
There is no text but encoded text. An encoding maps a member of a character set to one or more bytes. Unless you absolutely know you are using ASCII, you probably aren't. There are quite a few character sets with encodings that cover all 256 byte values and use any combination of byte values to encode a string.
There are several character sets that are similar but have a few less than 256 characters. And others that use more than one byte to encode a codepoint and don't use every combination of byte values.
Just so you know, Unicode is the predominant character set except in very specialized situations. It has several encodings. UTF-8 is often used for storage and streams. UTF-16 is often used in memory, particularly in Java, .NET, JavaScript, XML, …. When text is communicated between systems, there has to be an agreement, specification, standard, or indication about which character set and encoding it uses so a sequence of bytes can be interpreted as characters.
To add to the confusion, programming languages have data types called char, Character, etc. You have to look at the specific language's reference manual to see what they mean. For example in C, char is simply an integer that is defined as the size of the encoding of character used by that C implementation. (C also calls this a "byte" and it is not necessarily 8 bits. In all other contexts, people mean 8 bits when they say "byte". If they want to be exceedingly unambiguous they might say "octet".)
"Hello" is five characters. In a specific character set, it is five codepoints. In a specific encoding for that character set, it could be 5, 10 or 20, or ??? bytes.
Also, in the source code of a specific language, a literal string like that might be "null-terminated". This means that you could say it is 6 "characters". Other languages might store a string as a counted sequence of code units. Again, you have to look at the language reference to know the underlying data structure of strings. Of, if the language and the libraries used with it are sufficiently high-level, you might never need to know such internals.
I am reading a (.txt) file, the contents of first line are just the four alphabet letters: "abcd".
when I display the ASCII code of these letters, I expect I to find 97,98,99 and 100 respectively for a,b,c and b. But I found tow special characters which their ASCII code are 255 and 254 for ÿ and þ.
Therefore the length of read line is 6 not 4 because of "ÿþabcd". Are these special character must-to-insert at the start of any sequential text file or is there any way to avoid both of them?
ASCII is only used in niche or archaic systems. Your data proved to you that your file is not ASCII. You must find out which character set and encoding the file was stored in.
Character Sets
All text is an encoding of elements of a character set. Elements of a character set are called codepoints. A character set consists of a list of codepoints and their descriptions. The description states how the codepoint is used semantically in text, such as LATIN CAPITAL LETTER A (A) or N-ARY PRODUCT (∏). (The style in which the codepoint is rendered is the purview of typefaces/fonts.)
Encodings
Codepoints are numbered with non-negative integers. The number is encoded into bytes. Most character sets have only one encoding, which is the number as an unsigned integer in the smallest size that can represent all of the codepoints. For example, Windows-1252 has 251 codepoints, with numbers between 0 and 255. A byte is big enough to represent any of them. The Unicode character set has about 1 million codepoints, numbered from 0 to 1,114,112. A 32-bit integer is big enough to represent all of them. That's the UTF-32 encoding.
Byte order
Computer memory is usually byte-addressable and file are byte sequences so for a large integer the question becomes, in which order the bytes are stored: The most significant byte first (big endian) or least significant byte first (little endian). Software adapts to or assumes one way or the other. So, UTF-32 actually identifies one of two encodings: UTF32BE or UTF-32LE. UTF-32 is shorthand for the endianness that the software assumes. Typically, the OS assumes the endianness of the hardware it is running on and programs follow suit.
Unicode Encodings
UTF-32 takes a lot of space. The most commonly used codepoints are numbered below 65,536. So there can be savings if codepoints are represented variable number of smaller integers. The size of the integer is called a code unit. The value of a code unit contains some of the bits of a code unit and indicates if there are more code units to follow that have more of the bits. So, there are UTF-16LE and UTF-16BE and UTF-8 (and more) encodings for Unicode. UTF-16 uses one or two 16-bit code units for a codepoint and UTF-8 uses one to four 8-bit code units for a codepoint.
Files are data outside of programs. So for a program to read text, it has to know the character set and encoding. Often this metadata is not stored with the file (within or beside). That's how you made the mistake of believing your file is ASCII. If you don't know the encoding of a file, you've lost data. You might be able to recover it through guessing. It is notable that the CP437 character set has 256 codepoints, numbered 0 to 255 and encoded in one byte. So every file can be read as CP437; The question is, is that right? Even if it looks right, it's probably not right unless it's from a Western culture circa 1990.
Unicode Byte-order Mark
A strong clue about which character set and encoding to guess is called the byte-order mark (BOM). Recall encodings with code units larger than one byte have an endianness. Endianness is a hardware concern. So, although a file can be passed between systems with agreement on which character set and encoding scheme is used, the endianness attribute of encoding is critical to each system. It has become standard to indicate byte order within the file, as the first bytes. Unicode specifies a codepoint to use for this purpose, as long as it is at the beginning of the file. (That means that programs reading Unicode from a file must separate this metadata from the data.) Many file writing libraries write the BOM codepoint regardless of the code unit size. So, you'll see it at the beginning of UTF-8 files. Since the Unicode BOM looks different in each of the Unicode encodings, it completely identifies which Unicode encoding is being used.
Guessing
Your file begins with the UTF-16LE BOM. Read it as UTF-16LE (and discard the BOM codepoint if your library doesn't already.)
Given the specificness of the Unicode BOM, its presence is a strong indicator that the file is encoded in Unicode and the actual bytes tell which Unicode encoding. However, as noted above, it's possible that this guess is wrong.
As #Lưu Vĩnh Phúc points out, it is unclear how you are reading "ÿþabcd" from what you say is a 6-byte file. Open the file in a hex editor. UTF-16LE should be FF FE 61 00 62 00 63 00 64 00.
What is the maximum number of bytes for a single UTF-8 encoded character?
I'll be encrypting the bytes of a String encoded in UTF-8 and therefore need to be able to work out the maximum number of bytes for a UTF-8 encoded String.
Could someone confirm the maximum number of bytes for a single UTF-8 encoded character please
The maximum number of bytes per character is 4 according to RFC3629 which limited the character table to U+10FFFF:
In UTF-8, characters from the U+0000..U+10FFFF range (the UTF-16
accessible range) are encoded using sequences of 1 to 4 octets.
(The original specification allowed for up to six byte character codes for code points past U+10FFFF.)
Characters with a code less than 128 will require 1 byte only, and the next 1920 character codes require 2 bytes only. Unless you are working with an esoteric language, multiplying the character count by 4 will be a significant overestimation.
Without further context, I would say that the maximum number of bytes for a character in UTF-8 is
answer: 6 bytes
The author of the accepted answer correctly pointed this out as the "original specification". That was valid through RFC-2279 1. As J. Cocoe pointed out in the comments below, this changed in 2003 with RFC-3629 2, which limits UTF-8 to encoding for 21 bits, which can be handled with the encoding scheme using four bytes.
answer if covering all unicode: 4 bytes
But, in Java <= v7, they talk about a 3-byte maximum for representing unicode with UTF-8? That's because the original unicode specification only defined the basic multi-lingual plane (BMP), i.e. it is an older version of unicode, or subset of modern unicode. So
answer if representing only original unicode, the BMP: 3 bytes
But, the OP talks about going the other way. Not from characters to UTF-8 bytes, but from UTF-8 bytes to a "String" of bytes representation. Perhaps the author of the accepted answer got that from the context of the question, but this is not necessarily obvious, so may confuse the casual reader of this question.
Going from UTF-8 to native encoding, we have to look at how the "String" is implemented. Some languages, like Python >= 3 will represent each character with integer code points, which allows for 4 bytes per character = 32 bits to cover the 21 we need for unicode, with some waste. Why not exactly 21 bits? Because things are faster when they are byte-aligned. Some languages like Python <= 2 and Java represent characters using a UTF-16 encoding, which means that they have to use surrogate pairs to represent extended unicode (not BMP). Either way that's still 4 bytes maximum.
answer if going UTF-8 -> native encoding: 4 bytes
So, final conclusion, 4 is the most common right answer, so we got it right. But, mileage could vary.
The maximum number of bytes to support US-ASCII, a standard English alphabet encoding, is 1. But limiting text to English is becoming less desirable or practical as time goes by.
Unicode was designed to represent the glyphs of all human languages, as well as many kinds of symbols, with a variety of rendering characteristics. UTF-8 is an efficient encoding for Unicode, although still biased toward English. UTF-8 is self-synchronizing: character boundaries are easily identified by scanning for well-defined bit patterns in either direction.
While the maximum number of bytes per UTF-8 character is 3 for supporting just the 2-byte address space of Plane 0, the Basic Multilingual Plane (BMP), which can be accepted as minimal support in some applications, it is 4 for supporting all 17 current planes of Unicode (as of 2019). It should be noted that many popular "emoji" characters are likely to be located in Plane 16, which requires 4 bytes.
However, this is just for basic character glyphs. There are also various modifiers, such as making accents appear over the previous character, and it is also possible to link together an arbitrary number of code points to construct one complex "grapheme". In real world programming, therefore, the use or assumption of a fixed maximum number of bytes per character will likely eventually result in a problem for your application.
These considerations imply that UTF-8 character strings should not "expanded" into arrays of fixed length prior to processing, as has sometimes been done. Instead, programming should be done directly, using string functions specifically designed for UTF-8.
Condidering just technical limitations - it's possible to have up to 7 bytes following current UTF8 encoding scheme. According to it - if first byte is not self-sufficient ASCII character, than it should have pattern: 1(n)0X(7-n), where n is <= 7.
Also theoretically it could be 8 but then first byte would have no zero bit at all. While other aspects, like continuation byte differing from leading, are still there (allowing error detection), I heared, that byte 11111111 could be invalid, but I can't be sure about that.
Limitatation for max 4 bytes is most likely for compatibility with UTF-16, which I tend to consider a legacy, because the only quality where it excels, is processing speed, but only if string byte order matches (i.e. we read 0xFEFF in the BOM).