I want to find for each function defined in a C source file how many times it's called and on which line.
Should I search for patterns which look like function definitions in C and then count how many times that function name occurs. If so, how can I do it? regular expressions?
Any help will be highly appreciated!
#!/bin/bash
if [ -r $1 ]; then
#??????
else
echo The file \"$1\" does NOT exist
fi
The final result is: (please report any bugs)
10 if [ -r $1 ]; then
11 functs=`grep -n -e "\(void\|double\|char\|int\) \w*(.*)" $1 | sed 's/^.*\(void\|double\|int\) \(\w*\)(.*$/\2/g'`
12 for f in $functs;do
13 echo -n $f\(\) is called:
14 grep -n $f $1 > temp.txt
15 echo -n `grep -c -v -e "\(void\|double\|int\) $f(.*)" -e"//" temp.txt`
16 echo " times"
17 echo -n on lines:
18 echo -n `grep -v -e "\(void\|double\|int\) $f(.*)" -e"//" temp.txt | sed -n 's/^\([0-9]*\)[:].*/\1/p'`
19 echo
20 echo
21 done
22 else
23 echo The file \"$1\" does not exist
24 fi
This might sort of work. The first bit finds function definitions like
<datatype> <name>(<stuff>)
and pulls out the <name>. Then grep for that string. There are loads of situations where this won't work, but it might be a good place to start if you're trying to make a simple shell script that works on some programs.
functions=`grep -e "\(void\|double\|int\) \w*(.*)$" -f input.c | sed 's/^.*\(void\|double\|int\) \(\w*\)(.*$/\2/g'`
for func in $functions
do
echo "Counting references for $func:"
grep "$func" -f input.c | wc -l
done
You can try with this regex
(^|[^\w\d])?(functionName(\s)*\()
for example to search all printf occurrences
(^|[^\w\d])?(printf(\s)*\()
to use this expression with grep you have to use the option -E, like this
grep -E "(^|[^\w\d])?(printf(\s)*\()" the_file.txt
Final note, what miss with this solution is to skip the occurrences in comment bloks.
Related
I'm still new to the shell and need some help.
I have a file stapel_old.
Also I have in the same directory files like english_old_sync, math_old_sync and vocabulary_old_sync.
The content of stapel_old is:
english
math
vocabulary
The content of e.g. english is:
basic_grammar.md
spelling.md
orthography.md
I want to manipulate all files which are given in stapel_old like in this example:
take the first line of stapel_old 'english', (after that math, and so on)
convert in this case english to english_old_sync, (or after that what is given in second line, e.g. math to math_old_sync)
search in english_old_sync line by line for the pattern '.md'
And append to each line after .md :::#a1
The result should be e.g. of english_old_sync:
basic_grammar.md:::#a1
spelling.md:::#a1
orthography.md:::#a1
of math_old_sync:
geometry.md:::#a1
fractions.md:::#a1
and so on. stapel_old should stay unchanged.
How can I realize that?
I tried with sed -n, while loop (while read -r line), and I'm feeling it's somehow the right way - but I still get errors and not the expected result after 4 hours inspecting and reading.
Thank you!
EDIT
Here is the working code (The files are stored in folder 'olddata'):
clear
echo -e "$(tput setaf 1)$(tput setab 7)Learning directories:$(tput sgr 0)\n"
# put here directories which should not become flashcards, command: | grep -v 'name_of_directory_which_not_to_learn1' | grep -v 'directory2'
ls ../ | grep -v 00_gliederungsverweise | grep -v 0_weiter | grep -v bibliothek | grep -v notizen | grep -v Obsidian | grep -v z_nicht_uni | tee olddata/stapel_old
# count folders
echo -ne "\nHow much different folders: " && wc -l olddata/stapel_old | cut -d' ' -f1 | tee -a olddata/stapel_old
echo -e "Are this learning directories correct? [j ODER y]--> yes; [Other]-->no\n"
read lernvz_korrekt
if [ "$lernvz_korrekt" = j ] || [ "$lernvz_korrekt" = y ];
then
read -n 1 -s -r -p "Learning directories correct. Press any key to continue..."
else
read -n 1 -s -r -p "Learning directories not correct, please change in line 4. Press any key to continue..."
exit
fi
echo -e "\n_____________________________\n$(tput setaf 6)$(tput setab 5)Found cards:$(tput sgr 0)$(tput setaf 6)\n"
#GET && WRITE FOLDER NAMES into olddata/stapel_old
anzahl_zeilen=$(cat olddata/stapel_old |& tail -1)
#GET NAMES of .md files of every stapel and write All to 'stapelname'_old_sync
i=0
name="var_$i"
for (( num=1; num <= $anzahl_zeilen; num++ ))
do
i="$((i + 1))"
name="var_$i"
name=$(cat olddata/stapel_old | sed -n "$num"p)
find ../$name/ -name '*.md' | grep -v trash | grep -v Obsidian | rev | cut -d'/' -f1 | rev | tee olddata/$name"_old_sync"
done
(tput sgr 0)
I tried to add:
input="olddata/stapel_old"
while IFS= read -r line
do
sed -n "$line"p olddata/stapel_old
done < "$input"
The code to change only the english_old_sync is:
lines=$(wc -l olddata/english_old_sync | cut -d' ' -f1)
for ((num=1; num <= $lines; num++))
do
content=$(sed -n "$num"p olddata/english_old_sync)
sed -i "s/"$content"/""$content":::#a1/g"" olddata/english_old_sync
done
So now, this need to be a inner for-loop, of a outer for-loop which holds the variable for english, right?
stapel_old should stay unchanged.
You could try a while + read loop and embed sed inside the loop.
#!/usr/bin/env bash
while IFS= read -r files; do
echo cp -v "$files" "${files}_old_sync" &&
echo sed '/^.*\.md$/s/$/:::#a1/' "${files}_old_sync"
done < olddata/staple_old
convert in this case english to english_old_sync, (or after that what is given in second line, e.g. math to math_old_sync)
cp copies the file with a new name, if the goal is renaming the original file name from the content of the file staple_old then change cp to mv
The -n and -i flag from sed was ommited , include it, if needed.
The script also assumes that there are no empty/blank lines in the content of staple_old file. If in case there are/is add an addition test after the line where the do is.
[[ -n $files ]] || continue
It also assumes that the content of staple_old are existing files. Just in case add an additional test.
[[ -e $files ]] || { printf >&2 '%s no such file or directory.\n' "$files"; continue; }
Or an if statement.
if [[ ! -e $files ]]; then
printf >&2 '%s no such file or directory\n' "$files"
continue
fi
See also help test
See also help continue
Combining them all together should be something like:
#!/usr/bin/env bash
while IFS= read -r files; do
[[ -n $files ]] || continue
[[ -e $files ]] || {
printf >&2 '%s no such file or directory.\n' "$files"
continue
}
echo cp -v "$files" "${files}_old_sync" &&
echo sed '/^.*\.md$/s/$/:::#a1/' "${files}_old_sync"
done < olddata/staple_old
Remove the echo's If you're satisfied with the output so the script could copy/rename and edit the files.
I need to check if a file has more than 1 line. I tried this:
if [ `wc -l file.txt` -ge "2" ]
then
echo "This has more than 1 line."
fi
if [ `wc -l file.txt` >= 2 ]
then
echo "This has more than 1 line."
fi
These just report errors. How can I check if a file has more than 1 line in a BASH conditional?
The command:
wc -l file.txt
will generate output like:
42 file.txt
with wc helpfully telling you the file name as well. It does this in case you're checking out a lot of files at once and want individual as well as total stats:
pax> wc -l *.txt
973 list_of_people_i_must_kill_if_i_find_out_i_have_cancer.txt
2 major_acheivements_of_my_life.txt
975 total
You can stop wc from doing this by providing its data on standard input, so it doesn't know the file name:
if [[ $(wc -l <file.txt) -ge 2 ]]
The following transcript shows this in action:
pax> wc -l qq.c
26 qq.c
pax> wc -l <qq.c
26
As an aside, you'll notice I've also switched to using [[ ]] and $().
I prefer the former because it has less issues due to backward compatibility (mostly to do with with string splitting) and the latter because it's far easier to nest executables.
A pure bash (≥4) possibility using mapfile:
#!/bin/bash
mapfile -n 2 < file.txt
if ((${#MAPFILE[#]}>1)); then
echo "This file has more than 1 line."
fi
The mapfile builtin stores what it reads from stdin in an array (MAPFILE by default), one line per field. Using -n 2 makes it read at most two lines (for efficiency). After that, you only need to check whether the array MAPFILE has more that one field. This method is very efficient.
As a byproduct, the first line of the file is stored in ${MAPFILE[0]}, in case you need it. You'll find out that the trailing newline character is not trimmed. If you need to remove the trailing newline character, use the -t option:
mapfile -t -n 2 < file.txt
if [ `wc -l file.txt | awk '{print $1}'` -ge "2" ]
...
You should always check what each subcommand returns. Command wc -l file.txt returns output in the following format:
12 file.txt
You need first column - you can extract it with awk or cut or any other utility of your choice.
How about:
if read -r && read -r
then
echo "This has more than 1 line."
fi < file.txt
The -r flag is needed to ensure line continuation characters don't fold two lines into one, which would cause the following file to report one line only:
This is a file with _two_ lines, \
but will be seen as one.
change
if [ `wc -l file.txt` -ge "2" ]
to
if [ `cat file.tex | wc -l` -ge "2" ]
If you're dealing with large files, this awk command is much faster than using wc:
awk 'BEGIN{x=0}{if(NR>1){x=1;exit}}END{if(x>0){print FILENAME,"has more than one line"}else{print FILENAME,"has one or less lines"}}' file.txt
I have a directory (output) in unix (SUN). There are two types of files created with timestamp prefix to the file name. These file are created on a regular interval of 10 minutes.
e. g:
1. 20140129_170343_fail.csv (some lines are there)
2. 20140129_170343_success.csv (some lines are there)
Now I have to search for a particular string in all the files present in the output directory and if the string is found in fail and success files, I have to count the number of lines present in those files and save the output to the cnt_succ and cnt_fail variables. If the string is not found I will search again in the same directory after a sleep timer of 20 seconds.
here is my code
#!/usr/bin/ksh
for i in 1 2
do
grep -l 0140127_123933_part_hg_log_status.csv /osp/local/var/log/tool2/final_logs/* >log_t.txt; ### log_t.txt will contain all the matching file list
while read line ### reading the log_t.txt
do
echo "$line has following count"
CNT=`wc -l $line|tr -s " "|cut -d" " -f2`
CNT=`expr $CNT - 1`
echo $CNT
done <log_t.txt
if [ $CNT > 0 ]
then
exit
fi
echo "waiitng"
sleep 20
done
The problem I'm facing is, I'm not able to get the _success and _fail in file in line and and check their count
I'm not sure about ksh, but while ... do; ... done is notorious for running off with whatever variables you're using in bash. ksh might be similar.
If I've understand your question right, SunOS has grep, uniq and sort AFAIK, so a possible alternative might be...
First of all:
$ cat fail.txt
W34523TERG
ADFLKJ
W34523TERG
WER
ASDTQ34T
DBVSER6
W34523TERG
ASDTQ34T
DBVSER6
$ cat success.txt
abcde
defgh
234523452
vxczvzxc
jkl
vxczvzxc
asdf
234523452
vxczvzxc
dlkjhgl
jkl
wer
234523452
vxczvzxc
And now:
egrep "W34523TERG|ASDTQ34T" fail.txt | sort | uniq -c
2 ASDTQ34T
3 W34523TERG
egrep "234523452|vxczvzxc|jkl" success.txt | sort | uniq -c
3 234523452
2 jkl
4 vxczvzxc
Depending on the input data, you may want to see what options sort has on your system. Examining uniq's options may prove useful too (it can do more than just count duplicates).
Think you want something like this (will work in both bash and ksh)
#!/bin/ksh
while read -r file; do
lines=$(wc -l < "$file")
((sum+=$lines))
done < <(grep -Rl --include="[1|2]*_fail.csv" "somestring")
echo "$sum"
Note this will match files starting with 1 or 2 and ending in _fail.csv, not exactly clear if that's what you want or not.
e.g. Let's say I have two files, one starting with 1 (containing 4 lines) and one starting with 2 (containing 3 lines), both ending in `_fail.csv somewhere under my current working directory
> abovescript
7
Important to understand grep options here
-R, --dereference-recursive
Read all files under each directory, recursively. Follow all
symbolic links, unlike -r.
and
-l, --files-with-matches
Suppress normal output; instead print the name of each input
file from which output would normally have been printed. The
scanning will stop on the first match. (-l is specified by
POSIX.)
Finaly I'm able to find the solution. Here is the complete code:
#!/usr/bin/ksh
file_name="0140127_123933.csv"
for i in 1 2
do
grep -l $file_name /osp/local/var/log/tool2/final_logs/* >log_t.txt;
while read line
do
if [ $(echo "$line" |awk '/success/') ] ## will check the success file
then
CNT_SUCC=`wc -l $line|tr -s " "|cut -d" " -f2`
CNT_SUCC=`expr $CNT_SUCC - 1`
fi
if [ $(echo "$line" |awk '/fail/') ] ## will check the fail file
then
CNT_FAIL=`wc -l $line|tr -s " "|cut -d" " -f2`
CNT_FAIL=`expr $CNT_FAIL - 1`
fi
done <log_t.txt
if [ $CNT_SUCC > 0 ] && [ $CNT_FAIL > 0 ]
then
echo " Fail count = $CNT_FAIL"
echo " Success count = $CNT_SUCC"
exit
fi
echo "waitng for next search..."
sleep 10
done
Thanks everyone for your help.
I don't think I'm getting it right, but You can't diffrinciate the files?
maybe try:
#...
CNT=`expr $CNT - 1`
if [ $(echo $line | grep -o "fail") ]
then
#do something with fail count
else
#do something with success count
fi
I'm looking to get the number of subdirectories within a directory and compare that with a predefined number.
Ex:
cd /Applications/
x=echo ls -d */ | wc -l | sed 's/^ *//g'
y="52"
if [ "$x" == "$y" ]; then
echo "equal"
else
echo "not equal"
fi
It will give me a number for x (52 in my case), but will always say "not equal". What am I doing wrong? Any help would be greatly appreciated.
Thanks
For bash, do this:
cd /Applications/
dirs=( */ ) # dirs is an array with the names of directories here
if (( ${#dirs[#]} == $y )); then
echo "equal"
else
echo "not equal"
fi
Replace
x=echo ls -d */ | wc -l | sed 's/^ *//g'
with:
x="$(ls -d */ | wc -l | sed 's/^ *//g')"
Explanation: When you write x=echo ls -d */ ..., bash thinks that you mean to temporarily set the the variable x to a value of "echo" and then run the ls command. You, instead, want to run the command s -d */ | wc -l | sed 's/^ *//g' and save the output in x. The construct x=$(...) tells bash to execute whatever was in the parens and assign the output to x.
Also, bash's [ command does not accept ==. Use = for string comparison. However, you really want mathematical comparison. So use '-eq':
if [ "$x" -eq "$y" ]; then
I've searched here, but still can't find the answer to my globbing problems.
We have files "file.1" through "file.5", and each one should contain the string "completed" if our overnight processing went ok.
I figure it's a good thing to first check that there are some files, then I want to grep them to see if I find 5 "completed" strings. The following innocent approach doesn't work:
FILES="/mydir/file.*"
if [ -f "$FILES" ]; then
COUNT=`grep completed $FILES`
if [ $COUNT -eq 5 ]; then
echo "found 5"
else
echo "no files?"
fi
Thanks for any advice....Lyle
Per http://mywiki.wooledge.org/BashFAQ/004, the best approach to counting files is to use an array (with the nullglob option set):
shopt -s nullglob
files=( /mydir/files.* )
count=${#files[#]}
If you want to collect the names of those files, you can do it like so (assuming GNU grep):
completed_files=()
while IFS='' read -r -d '' filename; do
completed_files+=( "$filename" )
done < <(grep -l -Z completed /dev/null files.*)
(( ${#completed_files[#]} == 5 )) && echo "Exactly 5 files completed"
This approach is somewhat verbose, but guaranteed to work even with highly unusual filenames.
try this:
[[ $(grep -l 'completed' /mydir/file.* | grep -c .) == 5 ]] || echo "Something is wrong"
will print "Something is wrong" if doesn't find 5 completed lines.
Corrected the missing "-l" - the explanation
$ grep -c completed file.*
file.1:1
file.2:1
file.3:0
$ grep -l completed file.*
file.1
file.2
$ grep -l completed file.* | grep -c .
2
$ grep -l completed file.* | wc -l
2
You can do this to prevent globbing:
echo \'$FILES\'
but it seems you have a different problem