Have been trying installing compass after installing ruby version 1.9.3 on windows 7 but always getting following message every now and then:
C:\Users\marif>gem install compass
Fetching: fssm-0.2.9.gem ( 22%)ERROR: While executing gem ... (Gem::RemoteFetch
er::FetchError)
too many connection resets (http://cachefly.mirrors.rubygems.org/gems/fssm-0
.2.9.gem)
Also tried out the gem update --system but didn't get any luck so far.
Ahh, it works on home network and never worked out at work somehow.
I think in windows7 You have to restart your machine after installing ruby. That is how it worked for me. Even I was thinking same way that it doesn't work on work-network but works at home-network but it's wrong.
Related
After a couple of days of not doing pretty much anything on the ubuntu box, I decided to try out some ruby stuff. For this, I wanted to fire up pry. Unfortunately, I was presented with
Sorry, you can't use Pry without Readline or a compatible library.
Please gem install rb-readline or recompile Ruby --with-readline.
~/.rbenv/versions/2.1.1/lib/ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in
`require': libreadline.so.5: cannot open shared object file: No such
file or directory -
~/.rbenv/versions/2.1.1/lib/ruby/2.1.0/x86_64-linux/readline.so
(LoadError)
Being quite new to linux in general, I figured I'd just do as it said, and install this rb-readline. The installation passes just fine, but doesnt seem to do anything at all. If I do gem list p, the package just doesn't appear.
So yeah, I just don't know what to do to get it working again, and the only thing I managed to find by searching was related to an installation without rbenv and had something to do with sudo etc.
Any ideas?
Without understanding the problem and following the advice in option 2 of the message:
Sorry, you can't use Pry without Readline or a compatible library.
Possible solutions:
* Rebuild Ruby with Readline support using `--with-readline`
* Use the rb-readline gem, which is a pure-Ruby port of Readline <==== Option 2
* Use the pry-coolline gem, a pure-ruby alternative to Readline
I added the gem into the Gemfile (as follows), bundled and pry was then available.
group :development, :test do
gem 'pry'
gem 'rb-readline'
end
I had this problem too. I am using rbenv and reinstalling ruby via
rbenv install -f 2.2.3
did fixed it for me. Of course you'd put in your respective version. -f forces the installation even though you already have that specific version installed. use rbenv global to find out what version you have installed and set.
I have some problem. But I don't want to add gem 'rb-readline'. So try it...
$ln -s /usr/local/opt/readline/lib/libreadline.8.0.dylib /usr/local/opt/readline/lib/libreadline.7.dylib
Do a sudo apt-get install libreadline-dev, seems like you're missing the readline shared library that pry is wanting. If it worked before, not sure why the library isn't there anymore.
I ended up doing rbenv uninstall, followed by rbenv install and re-installing all the gems, and got it back to working. Still no idea what caused it in the first place, but it works now.
I upgraded my hardware yesterday and fresh installed Win 8.1. This error is killing me since then. I already lost full day of work trying to figure out what's going on. I never encountered this on my Mac or in my old Win 7 machine.
Setting up a new project with yo webapp using Bootstrap and Modernizr works great. Server would fire-up and I can see my updates livereload. But, setting up a new project with Compass and SASS included would prevent me from starting local server and throw this error:
D:\test>grunt serve
Running "serve" task
Running "clean:server" (clean) task
Running "concurrent:server" (concurrent) task
Running "copy:styles" (copy) task
Done, without errors.
Warning: Errno::EACCES on line ["897"] of C: Permission denied - (D:/test/.t
mp/styles/main.css20140323-6060-d9r9eo, D:/test/.tmp/styles/main.css)
Run with --trace to see the full backtrace Use --force to continue.
Aborted due to warnings.
Execution Time (2014-03-23 20:05:00 UTC)
concurrent:server 4.8s ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ 100%
Total 4.8s
D:\test>
I updated Compass and SASS to latest version, reinstalled Yeoman & Ruby, and tried bunch of other small tweaks. Nothing worked.
Any ideas what else I could try?
I have found solution for this issue. I guess this might help with other similar problems running grunt server. This is what did it for me:
Uninstall SASS
gem uninstall sass
Uninstall COMPASS
gem uninstall compass
Install --pre COMPASS version
gem install compass --pre
Install --pre SASS version
gem install sass --pre
For some reason only running task in this order worked for me. I hope this helps.
Issue is solved in SASS 3.2.19
Try gem update compass
I'm trying to install the mysql2 gem on Windows 8 (Ruby 1.9.3 and Rails 4.0.1). I've installed the Devkit and it's working properly, and I'm entering the following:
gem install mysql2 --platform=ruby -- '--with-mysql-lib="C:\mysql-connector\lib" --with-mysql-include="C:\mysql-connector\include" --with-mysql-dir="C:\mysql-conector"'
I've done this before and it's worked, but for some reason this time it's throwing this bizarre message:
Cannot find include dir at C:\mysql-connector\include;C:\mysql-connector\include;C:\mysql-connector/include;
This is of course in addition to the whole "Could not create makefile for some reason..." message. I'm using the mysql connector that I found through a different post here--Ruby MYSQL2 gem installation on windows 7
Does anyone know how I can fix this? I really need this gem...
I figured this out...
All I had to do was:
gem install mysql2 --platform=ruby -- '--with-mysql-dir="C:\mysql-connector\"'
Strange though--last time it worked with the code above... Go figure...
I just ran into the exact same issue trying to install mysql2 0.3.14 on Window 64bit, Rails 3.2.15 and Ruby 2.0.0p247. I used a command very simliar to what user2986379 posted and it worked; literally 5 minutes later when I had to rerun the command to fix another issue it stopped working. I was even copying the command from notepad each time so there wasn't a typo. Odd.
Anyway, user2986379's solution of adding quotes to the paths helped me get past the issue, but I was still getting some errors. I ended up modifying the command by removing the single quotes. In case anyone needs it, here's the command I ran:
gem install mysql2 --platform=ruby -- --with-mysql-dir="C:\mysql-connector"
Lastly, just for completeness, I had to use the version of connector c located here. You can read more about why this is necessary at the bottom of https://github.com/brianmario/mysql2/issues/372. It will install fine, but without the special connector_c you might get a segmentation fault when you go to actually use the gem. (Don't forget to grab the libmysql.dll out of that special connector c zip file as well and place it in your ruby bin directory.)
I have installed Ruby on my system, and now I want to install Compass. But when I execute the gem install compass command, it shows an error like this:
could not find valid gem 'compass' <>=0> in any repositary
And also:
SocketError: getadressinfo: no such host is known.<http://rubygems.org/latest_specs.4.8.gz>
I don't know what the problem is. If I run ruby -v, it shows the Ruby version. So what's the problem with installing Compass?
Can anyone explain this to me properly? I've searched Google, but all I could find was some proxy problem - and I couldn't understand how to set the proxy at all.
I'm using Windows and a company internet connection, so I don't know the username and password of my proxy.
I was behind a proxy and HumberFrench's solution above helped:
Go to Ruby bin folder:
cd c:/Ruby193/bin
And then install compass gem:
gem install compass --http-proxy http://<proxy_adreess>:<port_of_proxy>
Another tip: am on Aptana Studio, so this could be run from within Aptana's terminal.
Cant up-vote so adding this here.
I had the same problem, finally solved it manually.
Goto the rubygems compass page, and download the gem by clicking the Download link. Scroll down and you will see three Runtime Dependencies. Goto each of them and download those gems also. Put all of them in a directory, and try
gem install downloaded_compass_filename
This should solve your problem.
If it gives an repository not found error message, you can force gem to try local files through the gem --local install option
if you use a proxy, and get error, do it
gem install compass --http-proxy http://<proxy_adreess>:<port_of_proxy>
gem install -h gives you a lor of options
The proxy is the most likely cause. You will have to get permission from the network admin, or manually download compass. For more info, See this SA post.
If you decide to go the manual route here is a link to the RubyGems compass page. This not ideal, but also better than having to write css without compass magic ^^
Good luck!
On windows i had a few instalations of ruby:
C:\ruby187
and
C:\Ruby200-x64
install compass in both places, using:
gem install compass
Try running the install command in the bin folder.
$ cd C:\Your_Ruby_Folder\bin
$ gem install compass
I have same problem and i resolve it with.
Uninstall ruby end deleted folder ruby
Download ruby version 1.9.x
After thet install sass
last stem: install compass
I've just done a fresh install of RubyMine 4.5 in order to get a quickstart on Rails dev.
Whenever I try and install any Gem using the Tools > Quick Install Gem... command, I get the following error (below is specific to the flickraw gem)
Failed to Install Gems
Following gems were not installed:
flickraw(0.9.6): While executing gem ...
(Errno::EACCESS)
Permission denied - /Users/Andy/.rvm/gems/ruby-1.9.3-p194/cache/flickraw-0.9.6.gem
I guess I get that it's a permissions error...but why is it happening, shouldn't this just work? And how do I fix it?
I'm running this on the latest version of OSX Mountain Lion.
I've had similar problems before, it turned out to be caused by sudo being the owner of some gems installed in that rvm ruby installation I was using. I guess I installed something with sudo by accident, I dunno-- but go check in /Users/Andy/.rvm/gems/ruby-1.9.3-p194/cache and /Users/Andy/.rvm/gems/ruby-1.9.3-p194/gems and see if sudo owns cache/flickraw-0.9.6.gem or any folders in gems and if needed change the owner and group back to you ... I actually had so many messed up I opted to just remove and rebuild that ruby.