I have a function in bash that outputs a bunch of lines to stdout. I want to combine them into a single line with some delimiter between them.
Before:
one
two
three
After:
one:two:three
What is an easy way to do this?
Use paste
$ echo -e 'one\ntwo\nthree' | paste -s -d':'
one:two:three
And another way:
cat file | tr -s "\n" ":"
This might work for you:
paste -sd':' file
For fun, here's a bash-only way:
echo $'one\n2 and 3\nfour' | { mapfile -t lines; IFS=:; echo "${lines[*]}"; }
outputs
one:2 and 3:four
The {} grouping is to ensure all the commands that refer to the array variable are executed in the same subshell. The variable will not exist once the pipeline ends.
http://www.gnu.org/software/bash/manual/bashref.html#index-mapfile-140
Taking #glennJackman's corrections verbatim
awk '{printf("%s%s", sep, $0); sep=":"} END {print ""}' file
Or as you specified bash
while read line ; do printf "%s:" $line ; done < file | sed s'/:$//'
I hope this helps
Input.txt
one
two
three
Perl Solution : dummy.pl
#a = `cat /home/Input.txt`;
foreach my $x (#a)
{
chomp($x);
push(#array,"$x");
}
chomp(#array);
print "#array";
Run the script as :
$> perl dummy.pl | sed 's/ /:/g' > Output.txt
Output.txt
one:two:three
Related
I have a file with the following content:
"X-Apple-I-MD-M" = "MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s";
I want to extract the returned results Output as:
MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s
Tks Everybody!
One awk idea, assuming this is the only line in the file:
$ awk -F'"' '{print $4}' file
MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s
If there are other lines and you wish to focus only on the line with the string "X-Apple-I-MD-M":
Input file:
$ cat file
some line to ignore
"X-Apple-I-MD-M" = "MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s";
other line to ignore and "with" some "quotes"
New awk idea:
$ pattern='X-Apple-I-MD-M'
$ awk -v ptn="${pattern}" -F'"' '$2==ptn {print $4}' file
MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s
And saving the awk result in a variable:
$ mystring=$(awk ... )
$ echo "${mystring}"
MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s
NOTE: keep in mind if there are multiple matching lines in file then ${mystring} will contain a multi-line value (eg, line1match\nline2match\nline3match
I always like sed.
$: echo '"X-Apple-I-MD-M" = "MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s";'| sed -E 's/^.*= *"([^"]+)" *; *$/\1/'
MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s
if it's a file,
$: sed -E 's/^.*= *"([^"]+)" *; *$/\1/' file
MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s
With GNU grep(1), something like.
grep -Po '(?<="X-Apple-I-MD-M" = ").*(?=";)' <<< '"X-Apple-I-MD-M" = "MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s";'
If it is in a file.
grep -Po '(?<="X-Apple-I-MD-M" = ").*(?=";)' file.txt
If your content is consistent, an ugly solution is:
VAL='"X-Apple-I-MD-M" = "MR7v7ctwW0yr3mAUY3rAluXgOReA4CIn1JWJS2ba1s";'
echo $VAL
echo $VAL | awk '{split($0, a, " = "); print(substr(a[2], 2, length(a[2]) - 3))}'
Guessing by the bash tag, this is probably supposed to be in pure Bash, without external processes…? Two (somewhat) random options:
while IFS='"' read _ _ _ code _; do
echo "$code"
done
while read line; do
line="${line#\"*\" = \"}"
line="${line%\";}"
echo "$line"
done
How do I add a string after each line in a file using bash? Can it be done using the sed command, if so how?
If your sed allows in place editing via the -i parameter:
sed -e 's/$/string after each line/' -i filename
If not, you have to make a temporary file:
typeset TMP_FILE=$( mktemp )
touch "${TMP_FILE}"
cp -p filename "${TMP_FILE}"
sed -e 's/$/string after each line/' "${TMP_FILE}" > filename
I prefer echo. using pure bash:
cat file | while read line; do echo ${line}$string; done
I prefer using awk.
If there is only one column, use $0, else replace it with the last column.
One way,
awk '{print $0, "string to append after each line"}' file > new_file
or this,
awk '$0=$0"string to append after each line"' file > new_file
If you have it, the lam (laminate) utility can do it, for example:
$ lam filename -s "string after each line"
Pure POSIX shell and sponge:
suffix=foobar
while read l ; do printf '%s\n' "$l" "${suffix}" ; done < file |
sponge file
xargs and printf:
suffix=foobar
xargs -L 1 printf "%s${suffix}\n" < file | sponge file
Using join:
suffix=foobar
join file file -e "${suffix}" -o 1.1,2.99999 | sponge file
Shell tools using paste, yes, head
& wc:
suffix=foobar
paste file <(yes "${suffix}" | head -$(wc -l < file) ) | sponge file
Note that paste inserts a Tab char before $suffix.
Of course sponge can be replaced with a temp file, afterwards mv'd over the original filename, as with some other answers...
This is just to add on using the echo command to add a string at the end of each line in a file:
cat input-file | while read line; do echo ${line}"string to add" >> output-file; done
Adding >> directs the changes we've made to the output file.
Sed is a little ugly, you could do it elegantly like so:
hendry#i7 tmp$ cat foo
bar
candy
car
hendry#i7 tmp$ for i in `cat foo`; do echo ${i}bar; done
barbar
candybar
carbar
I would like to remove a file name only from the following configuration file.
Configuration File -- test.conf
knowledgebase/arun/test.rf
knowledgebase/arunraj/tester/test.drl
knowledgebase/arunraj2/arun/test/tester.drl
The above file should be read. And removed contents should went to another file called output.txt
Following are my try. It is not working to me at all. I am getting empty files only.
#!/bin/bash
file=test.conf
while IFS= read -r line
do
# grep --exclude=*.drl line
# awk 'BEGIN {getline line ; gsub("*.drl","", line) ; print line}'
# awk '{ gsub("/",".drl",$NF); print line }' arun.conf
# awk 'NF{NF--};1' line arun.conf
echo $line | rev | cut -d'/' -f 1 | rev >> output.txt
done < "$file"
Expected Output :
knowledgebase/arun
knowledgebase/arunraj/tester
knowledgebase/arunraj2/arun/test
There's the dirname command to make it easy and reliable:
#!/bin/bash
file=test.conf
while IFS= read -r line
do
dirname "$line"
done < "$file" > output.txt
There are Bash shell parameter expansions that will work OK with the list of names given but won't work reliably for some names:
file=test.conf
while IFS= read -r line
do
echo "${line%/*}"
done < "$file" > output.txt
There's sed to do the job — easily with the given set of names:
sed 's%/[^/]*$%%' test.conf > output.txt
It's harder if you have to deal with names like /plain.file (or plain.file — the same sorts of edge cases that trip up the shell expansion).
You could add Perl, Python, Awk variants to the list of ways of doing the job.
You can get the path like this:
path=${fullpath%/*}
It cuts away the string after the last /
Using awk one liner you can do this:
awk 'BEGIN{FS=OFS="/"} {NF--} 1' test.conf
Output:
knowledgebase/arun
knowledgebase/arunraj/tester
knowledgebase/arunraj2/arun/test
How can I extract all the words from a file, every word on a single line?
Example:
test.txt
This is my sample text
Output:
This
is
my
sample
text
The tr command can do this...
tr [:blank:] '\n' < test.txt
This asks the tr program to replace white space with a new line.
The output is stdout, but it could be redirected to another file, result.txt:
tr [:blank:] '\n' < test.txt > result.txt
And here the obvious bash line:
for i in $(< test.txt)
do
printf '%s\n' "$i"
done
EDIT Still shorter:
printf '%s\n' $(< test.txt)
That's all there is to it, no special (pathetic) cases included (And handling multiple subsequent word separators / leading / trailing separators is by Doing The Right Thing (TM)). You can adjust the notion of a word separator using the $IFS variable, see bash manual.
The above answer doesn't handle multiple spaces and such very well. An alternative would be
perl -p -e '$_ = join("\n",split);' test.txt
which would. E.g.
esben#mosegris:~/ange/linova/build master $ echo "test test" | tr [:blank:] '\n'
test
test
But
esben#mosegris:~/ange/linova/build master $ echo "test test" | perl -p -e '$_ = join("\n",split);'
test
test
This might work for you:
# echo -e "this is\tmy\nsample text" | sed 's/\s\+/\n/g'
this
is
my
sample
text
perl answer will be :
pearl.214> cat file1
a b c d e f pearl.215> perl -p -e 's/ /\n/g' file1
a
b
c
d
e
f
pearl.216>
I would like to use the lines coming from 'wc' as variables. For example:
echo 'foo bar' > file.txt
echo 'blah blah blah' >> file.txt
wc file.txt
2 5 23 file.txt
I would like to have something like $lines, $words and $characters associated to the values 2, 5, and 23. How can I do that in bash?
In pure bash: (no awk)
a=($(wc file.txt))
lines=${a[0]}
words=${a[1]}
chars=${a[2]}
This works by using bash's arrays. a=(1 2 3) creates an array with elements 1, 2 and 3. We can then access separate elements with the ${a[indice]} syntax.
Alternative: (based on gonvaled solution)
read lines words chars <<< $(wc x)
Or in sh:
a=$(wc file.txt)
lines=$(echo $a|cut -d' ' -f1)
words=$(echo $a|cut -d' ' -f2)
chars=$(echo $a|cut -d' ' -f3)
There are other solutions but a simple one which I usually use is to put the output of wc in a temporary file, and then read from there:
wc file.txt > xxx
read lines words characters filename < xxx
echo "lines=$lines words=$words characters=$characters filename=$filename"
lines=2 words=5 characters=23 filename=file.txt
The advantage of this method is that you do not need to create several awk processes, one for each variable. The disadvantage is that you need a temporary file, which you should delete afterwards.
Be careful: this does not work:
wc file.txt | read lines words characters filename
The problem is that piping to read creates another process, and the variables are updated there, so they are not accessible in the calling shell.
Edit: adding solution by arnaud576875:
read lines words chars filename <<< $(wc x)
Works without writing to a file (and do not have pipe problem). It is bash specific.
From the bash manual:
Here Strings
A variant of here documents, the format is:
<<<word
The word is expanded and supplied to the command on its standard input.
The key is the "word is expanded" bit.
lines=`wc file.txt | awk '{print $1}'`
words=`wc file.txt | awk '{print $2}'`
...
you can also store the wc result somewhere first.. and then parse it.. if you're picky about performance :)
Just to add another variant --
set -- `wc file.txt`
chars=$1
words=$2
lines=$3
This obviously clobbers $* and related variables. Unlike some of the other solutions here, it is portable to other Bourne shells.
I wanted to store the number of csv file in a variable. The following worked for me:
CSV_COUNT=$(ls ./pathToSubdirectory | grep ".csv" | wc -l | xargs)
xargs removes the whitespace from the wc command
I ran this bash script not in the same folder as the csv files. Thus, the pathToSubdirectory
You can assign output to a variable by opening a sub shell:
$ x=$(wc some-file)
$ echo $x
1 6 60 some-file
Now, in order to get the separate variables, the simplest option is to use awk:
$ x=$(wc some-file | awk '{print $1}')
$ echo $x
1
declare -a result
result=( $(wc < file.txt) )
lines=${result[0]}
words=${result[1]}
characters=${result[2]}
echo "Lines: $lines, Words: $words, Characters: $characters"