I am very new to jQuery and am using the masked input plugin version 1.3 to create a mask for phone numbers.
I was able to set it up and have the mask work correctly, however I would like to apply a condition for the mask based upon a select box change.
When the page loads a select box with the id of #Country is loaded an is set to have 'United States' selected by default. What I am trying to create is if they change the country selector to something other than the United States choice, remove the mask.
This is my first attempt!
$('#Country').change(function(){
var cty = $(this).find('option:selected').attr('value');
if(cty=='United States'){
// us masking
$('#phone').unmask().mask("(999) 999-9999");
} else {
// just numbers for international
$('#phone').unmask().mask("9999999999999999");
}
});
Just to get the answere squared away and displayed correctly (asker comment)
$('#phone').mask('(999) 999-9999');
$('#Country').change(function(){
var cty = $(this).val();
if(cty=='United States'){
// us masking
$('#phone').unmask().mask("(999) 999-9999");
} else {
// just numbers for international
$('#phone').unmask().mask("9999999999999999");
}
});
I don't see any problem with you code.
Rather than
var cty = $(this).find('option:selected').attr('value');
try
var cty = $(this).val()
and try to debug your code by adding some
console.log("mask us")
console.log("mask non-us")
inside your if/else statements.
If your console.log() show the expected values, then the problem reside in your plugin, so try to contact its author directly.
Related
I have a kendo grid, in which I have selected filter on one column, I am reloading the grid, I want the same filter to be there when grid reloads.
I am using the below code to reload the grid. It works, but it doesn't show the selected filter item checked. I checked IDR in the filter then reloaded the page, it shows 1 item selected but doesn't show IDR as checked.
function ReloadGrid() {
var grid = $('#gridId').data('kendoGrid');
grid.dataSource.read();
grid.setDataSource(grid.dataSource);
}
Well there is two way to achieve this.
One way is to save filters in database and second one is to use local storage as mentioned in comment.
I prefer second one, using local storage to save filters and load it upon read.
#GaloisGirl is pointing you in right direction.
Check this example again: Persist state
Basic usage of locale storage is to save some data under some name (key,value):
let person = {
name: 'foo',
lastName: 'bar'
};
let save = function (person) {
let personString = JSON.stringify(person);
localStorage.setItem('person', personString);
console.log('Storing person: ', personString);
};
let load = function () {
let personString = localStorage.getItem('person'); // <----string
let person = JSON.parse(personString); // <----object
console.log('Stored person: ', person);
};
let remove = function (name) {
localStorage.removeItem(name);
console.log('Removed from local storage!');
};
save(person);
load();
remove(person.name);
In kendo world you need to save current options state of grid in local storage, you can achieve that by adding button like in example or on the fly with change or with window.onbeforeunload or like in your example beforen reload grid.
You can check saved data under application tab in browsers, eg. chrome:
Hope it helps, gl!
Well, I've been reading the documentation and I believe that I'm calling functions and passing parameters correctly, but for the life of me I can't get this simple UI code to work.
I'm generating a UI for a Spreadsheet using the following code:
function checkOut() {
var app = buildUI();
var spreadsheet = SpreadsheetApp.getActiveSpreadsheet();
spreadsheet.show(app);
}
function buildUI() {
var gui = UiApp.createApplication();
gui.setTitle("Check-Out/Check-In");
gui.setStyleAttribute("background", "lavender");
// Absolute panel for setting specific locations for elements
var panel = gui.createAbsolutePanel();
// Equipment ID#s Label
var equipmentIDLabel = gui.createLabel("Equipment ID#s");
equipmentIDLabel.setHorizontalAlignment(UiApp.HorizontalAlignment.CENTER);
equipmentIDLabel.setSize("20px", "125px");
equipmentIDLabel.setStyleAttributes({background: "SteelBlue", color: "white"});
// Add all components to panel
panel.add(equipmentIDLabel, 10, 0);
gui.add(panel);
return gui;
}
function getUIdata(eventInfo) {
// I know how to get the data from each element based on ID
}
It generates the Absolute Panel correctly when checkOut() is called, but the EquipmentIDLabel is never added to the panel. I am basing the code on the simplistic design I created in the GUI builder (that will be deprecated in a few days, which is why I am writing the code so that I can change it later):
So what exactly is going wrong here? If I can figure out how to add one element, I can infer the rest by looking at the docs. I've never been any good at GUI development!
You could maybe use grid as an interesting alternative... here is an example :
// define styles
var labelStyle = {background: "SteelBlue", color: "white",'textAlign':'center','line-height':'20px','vertical-align':'middle','font-family':"Arial, sans-serif",'fontSize':'10pt'};// define a common label style
var fieldStyle = {background: "white", color: "SteelBlue",'font-family':"Courrier, serif",'fontSize':'11pt'};// define a common label style
function checkOut() {
var app = buildUI();
var spreadsheet = SpreadsheetApp.getActiveSpreadsheet();
spreadsheet.show(app);
}
function buildUI() {
var gui = UiApp.createApplication();
gui.setTitle("Check-Out/Check-In");
gui.setStyleAttribute("background", "lavender");
var panel = gui.createAbsolutePanel().setStyleAttribute('padding','10px');
var grid = gui.createGrid(4,2).setWidth('300').setCellPadding(10);//define grid size in number of row & cols
var equipmentID = ['equipmentIDLabel','equipmentIDLabel1','equipmentIDLabel2','equipmentIDLabel3'];// define labels in an array of strings
for(var n=0 ;n<equipmentID.length ; n++){;// iterate
var equipmentIDLabel = gui.createLabel(equipmentID[n]).setWidth('125').setStyleAttributes(labelStyle);
var equipmentIDField = gui.createTextBox().setText('Enter value here').setName(equipmentID[n]).setSize("125", "20").setStyleAttributes(fieldStyle);
grid.setWidget(n,0,equipmentIDLabel).setWidget(n,1,equipmentIDField);
}
gui.add(panel.add(grid));
return gui;
}
It looks like the absolute panel offset method is a little capricious and take control of your positioning, in my tests I have been able to position panels that are visible in the following way:
panel.add(equipmentIDLabel);
panel.add(equipmentIDField,150,0);
panel.add(otherLabel);
panel.add(otherField, 150, 20);
Try it out with trial and error, you may get the UI you need, if not I would move to an alternate layout, verticalPanel is a little better behaved and of course you can use forms as well.
Another small bug is that you inverted the length and hight in equipmentIDLabel.setSize("20px", "125px");
Let me know if I can be of more assitance
The specific problem in your code is the following line :
// Add all components to panel
panel.add(equipmentIDLabel, 10, 0);
Simply change it to : panel.add(equipmentIDLabel);
..and you will see the field (at position 0,0).
As patt0 observes, you can then add OTHER components and use positioning. It seems to be a limitation of adding the first field to an absolutePanel.
Of course, the Google Script gui is now deprecated (since December 2014) but I was interested to try your code and see that it still basically executes (as at Feb 2016).
Edit formatter action button is placed to jqgrid column:
colModel: [{"fixed":true,"label":" change ","name":"_actions","width":($.browser.webkit == true? 37+15: 32+15)
,"align":"center","sortable":false,"formatter":"actions",
"formatoptions":{"keys":true,"delbutton":false,"onSuccess":function (jqXHR) {actionresponse = jqXHR;return true;}
,"afterSave":function (rowID) {
cancelEditing($('#grid'));afterRowSave(rowID,actionresponse);actionresponse=null; }
,"onEdit":function (rowID) {
if (typeof (lastSelectedRow) !== 'undefined' && rowID !== lastSelectedRow)
cancelEditing($('#grid'));
lastSelectedRow = rowID;
}
}}
New row is added to jqgrid in loadcomplete event
var newRowData = {};
var newRowId = '_empty' + $.jgrid.randId();
$('#grid').jqGrid('addRowData', newRowId, newRowData);
and its id is updated if save action button is clicked:
function aftersavefunc(rowID, response) {
restoreActionsIcons();
$('#grid').jqGrid('resetSelection');
var json = $.parseJSON(response.responseText);
$("#" + rowID).attr("id", json.Id);
lastSelectedRow = json.Id;
$("#grid").jqGrid('setSelection', lastSelectedRow);
}
After clicking save action button edit action button clicks are ignored. It is not possible to re-enter to edit mode after first editing.
How to fix this so that row can edited by edit button click again after saving ?
Update
I added $(this).focus() as suggested in Oleg answer and also wrapped id change into setTimeout as Oleg recommends in other great answer:
function aftersavefunc(rowID, response) {
restoreActionsIcons();
$(this).focus();
$('#grid').jqGrid('resetSelection');
var json = $.parseJSON(response.responseText);
setTimeout(function () {
$("#" + rowID).attr("id", json.Id);
lastSelectedRow = json.Id;
$("#grid").jqGrid('setSelection', lastSelectedRow);
}, 50);
}
Problem persists. The problem may related to row id change since:
It occurs only in last row (where id is changed after save). It does not occur for saved rows where responseText returns same id and row id is actually not changed.
It does not occur if cancel action button is pressed.
Maybe row id needs additional reset id addition to resetSelection or needs updated in somewhere other place also.
Update2
I added code form updated answer to errorfunc and used only english characters and numbers id ids. This allows to click multiple times but introduces additional issue:
extraparam is no more passed. If rowactions() calls are commented out, extraparam is passed with with rowactions calls extraparam is not passed.
I changed jqGrid source code and added alert to rowactions method:
alert( cm.formatoptions);
if (!$.fmatter.isUndefined(cm.formatoptions)) {
op = $.extend(op, cm.formatoptions);
}
In first clicks alert outputs 'Object'. In succeeding clicks to Save button it outputs undefined. So for unknown reason formatoptions is cleared.
Remarks to comment:
Absolute url in testcase is not used. Datasource is set to localarray.
I verified that testcase works in IE and FF without external url access.
For extraparam issue I can create new testcase.
Without image directory buttons are shown in cursor is moved over them.
Missing image directory still allows to reproduce the issue.
FormData function is defined in js file.
Since new issue occurs after adding rowactions() calls and does not occur if those calls are removed, this seems to be related to the code proposed in answer.
I suppose that the problem exist because one hide a button which has currently focus. Look at the code from the answer. If one remove the line $(this).focus(); // set focus somewhere one has the same problem as you describes. So I suggest that you just try to set somewhere, for example in restoreActionsIcons the focus to any the table element of the grid after hiding the button having currently the focus. I can't test this, but I hope it will help.
UPDATED: I examined your problem one more time and I hope I can suggest you a solution.
You problem can be divided on two sub-problems. The main your problem is the the changing of the id of the row. So it is not common problem which everybody has.
The problem is that "actions" formatter create onclick functions directly in the HTML code (see for example here):
ocl = "onclick=$.fn.fmatter.rowactions('"+rowid+"','"+opts.gid+"','edit',"+opts.pos+");..."
So the functions will contains the original rowid. To fix the problem you can modify the code fragment of your aftersavefunc inside of setTimeout from
$("#" + rowID).attr("id", json.Id);
lastSelectedRow = json.Id;
$("#grid").jqGrid('setSelection', lastSelectedRow);
to something like the following:
var $tr = $("#" + rowID),
$divEdit = $tr.find("div.ui-inline-edit"),
$divDel = $tr.find("div.ui-inline-del"),
$divSave = $tr.find("div.ui-inline-save"),
$divCancel = $tr.find("div.ui-inline-cancel");
$tr.attr("id", json.Id);
if ($divEdit.length > 0) {
$divEdit[0].onclick = function () {
$.fn.fmatter.rowactions(newId,'grid','edit',0);
};
}
if ($divDel.length > 0) {
$divDel[0].onclick = function () {
$.fn.fmatter.rowactions(newId,'grid','del',0);
};
}
if ($divSave.length > 0) {
$divSave[0].onclick = function () {
$.fn.fmatter.rowactions(newId,'grid','save',0);
};
}
if ($divCancel.length > 0) {
$divCancel[0].onclick = function () {
$.fn.fmatter.rowactions(newId,'grid','cancel',0);
};
}
lastSelectedRow = json.Id;
$("#grid").jqGrid('setSelection', lastSelectedRow);
The second problem is that you use special characters inside of ids. I found a bug in the $.fn.fmatter.rowactions which need be fixed to support special characters in ids. The problem is that in the line 407 of jquery.fmatter.js the original rowid parameter rid will be changed:
rid = $.jgrid.jqID( rid )
and later everywhere will be used modified id. For example in the id is my.id the encoded version will be my\\.id. It's correct for the most places of the $.fn.fmatter.rowactions code (see here), but it' s incorrect as the rowid parameter of the editRow, saveRow, restoreRow, delGridRow, setSelection and editGridRow (see the lines 433-453). So the code must be fixed to use the original not escaped (not encoded) rid value with which the $.fn.fmatter.rowactions was called.
I think I will post tomorrow the corresponding bug report with the suggestions in the trirand forum.
UPDATED 2: The code $.fn.fmatter.rowactions(newId,'grid','edit',0); which I wrote above is just an example. I took it from the test demo which you send me. You should of course modify the code for your purpose. How you can see for example from the line the second parameter of the $.fn.fmatter.rowactions in the id of the grid which you use: 'grid', 'list' of something like myGrid[0].id. The last parameter should be the index of the column having formatter:'actions' in the colModel. You can use getColumnIndexByName function from the answer on your old question to get the index by column name.
I'm using inline editing in my grid , I have some cases which i want to change the value of a cell inside a column. I'm changing it with setCell ,and it works good. my problem is that after the change the cell losts it's edit mode while all other cells of the row are in edit mode. I want to keep the cell in edit mode after i changed it.
for now what i did is saved the row and then selected it again and made in in edit mode - but i don't think it is a good solution - Is there a way to keep in edit mode while changin it?
Thank's In Advance.
If you need to implement the behavior of dependency cells which are all in the editing mode you have to modify the cell contain manually with respect of jQuery.html function for example. If the name of the column which you want to modify has the name "description", and you use 'blur' event on another "code" column then you can do about the following
editoptions: {
dataEvents: [
{
type: 'blur',
fn: function(e) {
var newCodeValue = $(e.target).val();
// get the information from any source about the
// description of based on the new code value
// and construct full new HTML contain of the "description"
// cell. It should include "<input>", "<select>" or
// some another input elements. Let us you save the result
// in the variable descriptionEditHtml then you can use
// populate descriptionEditHtml in the "description" edit cell
if ($(e.target).is('.FormElement')) {
// form editing
var form = $(e.target).closest('form.FormGrid');
$("#description.FormElement",form[0]).html(descriptionEditHtml);
} else {
// inline editing
var row = $(e.target).closest('tr.jqgrow');
var rowId = row.attr('id');
$("#"+rowId+"_description",row[0]).html(descriptionEditHtml);
}
}
}
]
}
The code will work for both inline and form editing.
The working example of dependent <select> elements you can find here.
blur does not fire if value is changed and enter is pressed immediately without moving to other cell. So better is to use
editrules = new
{
custom = true,
custom_func = function( val, col ) { ... }
},
and move this code from blur to custom_func as described in
jqgrid: how send and receive row data keeping edit mode
If I run following code in the playground:
var button1 = new qx.ui.form.Button("First Button", "icon/22/apps/internet-web-browser.png");
var doc = this.getRoot();
doc.add(button1, { left : 100, top : 50 });
button1.addListener("execute", function(e) { alert("Hello World!"); });
button1.setToolTipText(new qx.ui.core.Command("Control+D").toString());
qx.locale.Manager.getInstance().setLocale("en");
The Button-Tooltip shows Ctrl+D.
If I change the locale to "de" the tooltip still shows Ctrl+D. On the second run it shows Strg+D, the correct string.
How can I make it to show the correct string on the first run?
An even better example which shows my problem is this:
var doc = this.getRoot();
var button1 = new qx.ui.form.Button("Deutsch", "icon/22/apps/internet-web-browser.png");
doc.add(button1, { left : 100, top : 50 });
button1.addListener("execute", function(e) { qx.locale.Manager.getInstance().setLocale("de"); });
button1.setToolTipText(new qx.ui.core.Command("Control+D").toString());
var button2 = new qx.ui.form.Button("English", "icon/22/apps/internet-web-browser.png");
doc.add(button2, { left : 200, top : 50 });
button2.addListener("execute", function(e) { qx.locale.Manager.getInstance().setLocale("en"); });
button2.setToolTipText(new qx.ui.core.Command("Control+E").toString());
Have a look at the tooltips.
Is this a bug or am I not setting the locales the correct way?
/Kind regards
Christian
The problem with both of your snippets is that of evalutation and order. For one thing, qx.ui.core.Command("Control+D").toString() just returns a plain string, given the current locale. After that, the value is "fixed" and is not changed automatically anymore. In your first snippet, you first set the tooltip, and then change the locale. That means, the tooltip is set according to whatever locale is in effect before switching to "en". If you then re-run the snippet (I presume you are using the Playground), setting the tooltip is executed under the new locale and the tooltip shows the English version.
In the second snippet, changing the locale in the "execute" listener has no effect on the tooltip, as its value is already "hard-wired" using whatever locale was in effect at the time the code is evaluated (and not when one of the buttons is pressed!). Of course, if you press one of the buttons and then re-run the code in Playground, the new locale is then being picked up and displayed in the tooltips.
One way to work around this is to set the tooltip in the "execute" listener. See this Playground example.
(It's not very sensible, but I think you can work from this onward).