I have this very basic makefile:
CC=gcc
CFLAGS=-Wall -g -O -pedantic -Wformat=2 -Wextra -lm
And actually it compile foo.c to foo. How can I add a custom extension, for example I want it to compile foo.c in foo.run.
Thank you very much.
Add this to your makefile:
foo.run : foo.c
$(CC) $(CFLAGS) -o $# $<
Make sure the second line starts with a tab character, not spaces. Then check out the manual page or other documentation for your version of make.
Related
I am using GNUmake and I have a makefile with some targets defined and their respective dependencies. I would like to create a debug version of these targets, so I have this:
TARGET := a b c
all: $(TARGET)
a: a.o e.o
$(CC) $(CFLAGS) $(INCDIRS) -c $(^) -o $(#)
b: b.o g.o
$(CC) $(CFLAGS) $(INCDIRS) -c $(^) -o $(#) -pthread
c: f.o c.o
$(CC) $(CFLAGS) $(INCDIRS) -lm -c $(^) -o $(#)
%.o: %.c
$(CC) $(CFLAGS) $(INCDIRS) -c $(^) -o $(#)
So this is all good, but now I would like to create debug versions of these rules, but I don't want to have to rewrite the rules. I just want to add additional flags like -g -DDEBUG to the CFLAGS variable and change the names of the targets.
I tried this static rule stuff
$(TARGET:%=debug_%): %: * #<--- not sure how to specify the dependencies
# CFLAGS += -g -DDEBUG <-- uncommenting this line is an error
This didn't work. I wanted the above rule to match the targets I already specified, but add additional parameters to CFLAGS which will then generate files like debug_a, debug_b, debug_c etc. I am not sure if this is possible with make but that was just the way I was reasoning about this.
Any help will be appreciated, thanks
So I finally found a suitable solution:
DEBUG_TARGET := $(TARGET:%=debug_%)
debug: $(DEBUG_TARGET)
$(DEBUG_TARGET):
debug_%: CFLAGS += -g -DDEBUG
debug_%: %
#mv $* debug_$*
This will generate a debug version of each target without having to create separate rules.
The last line was the sweet spot for me and this accomplishes what I wanted without having to repeat myself too much
I want to automate the compilation of a toy library using CUDA and C++. Then I write a Makefile as follows
CC=g++
NVCC=nvcc
CXXFLAGS= -fopenmp -O3 -Wextra -std=c++11
CUDAFLAGS= -std=c++11 -c -arch=sm_20
LIBS= -lopenblas -lpthread -lcudart -lcublas
LIBDIRS=-L/usr/local/cuda-7.5/lib64
INCDIRS=-I/usr/local/cuda-7.5/include
matrix_cuda.o: marix_cuda.cu
$(NVCC) $(CUDAFLAGS) matrix_cuda.cu
all: matrix_cuda.o
$(CC) -o test matrix_blas.cpp alg.cpp test.cpp matrix_cuda.o $(LIBDIRS) $(INCDIRS) $(LIBS) $(CXXFLAGS)
clean:
rm -rf test *.o
Typing make I get
make: *** No rule to make target `marix_cuda.cu', needed by `matrix_cuda.o'. Stop.
I never wrote a Makefile before. Where did I go wrong?
I think you have a typo in the CUDA file name
matrix_cuda.o: marix_cuda.cu
$(NVCC) $(CUDAFLAGS) matrix_cuda.cu
IMHO it should be
matrix_cuda.o: matrix_cuda.cu
$(NVCC) $(CUDAFLAGS) matrix_cuda.cu
This may take a couple of iterations.
1) First try this:
nvcc -std=c++11 -c -arch=sm_20 matrix_cuda.cu
If that works (and produces matrix_cuda.o, I presume), remove matrix_cuda.o and
2) try this makefile:
matrix_cuda.o: matrix_cuda.cu
nvcc -std=c++11 -c -arch=sm_20 matrix_cuda.cu
If that works,
3) try this:
g++ -o test matrix_blas.cpp alg.cpp test.cpp matrix_cuda.o -L/usr/local/cuda-7.5/lib64 -I/usr/local/cuda-7.5/include -lopenblas -lpthread -lcudart -lcublas -fopenmp -O3 -Wextra -std=c++11
If that works, remove test and
4) try this makefile:
test: matrix_cuda.o
g++ -o test matrix_blas.cpp alg.cpp test.cpp matrix_cuda.o -L/usr/local/cuda-7.5/lib64 -I/usr/local/cuda-7.5/include -lopenblas -lpthread -lcudart -lcublas -fopenmp -O3 -Wextra -std=c++11
matrix_cuda.o: matrix_cuda.cu
nvcc -std=c++11 -c -arch=sm_20 matrix_cuda.cu
If that works, remove test and matrix_cuda.o and
5) try that makefile again.
If that works, there are further refinements we can make.
Also your first make rule corresponds to compiling the object file matrix_cuda.o. The all make rule should come first since the first rule in the make file is the one that gets updated first when invoking the command make. GNU Make has great documentation explaining how to make simple to complex makefiles. You can check it out here:
https://www.gnu.org/software/make/manual/make.html.
Also another issue you are going to run into is that in your make recipe for the all rule, you are supposed to be linking together only object files to create the final executable. However you are trying to include matrix_blas.cpp alg.cpp test.cpp in this linking step. Instead of .cpp versions of these files they need to be .o versions (the compiled objects). Make can generate these object files for you. You just need to have a make rule and recipe for each one. For example:
matrix_blas.o: matrix_blas.cpp
$(CC) $(CXXFLAGS) -c matrix_blas.cpp -o matrix_blas.o
I want to add some commentary on this Makefile for future reference and better automation :
1. NVCC=nvcc environment variable is superfluous. There is only one compiler for NVIDIA GPUs and you would nonetheless have to change a lot of flags to compile for other architectures like AMD.
-arch=native is better suited if you want to deploy your code on multiple machines with GPUs having different architectures
-dc is the flag for separate compilation. The architecture must be specified before -dc see (with a generic Makefile): https://developer.nvidia.com/blog/separate-compilation-linking-cuda-device-code/
You should add automatic rule to avoid these typos errors :
%.o: %.cu
nvcc -dc $(CUDAFLAGS) $< -o $#
The Makefile will look for all dependencies ending by .o. If it needs to build one, it looks if it has the corresponding .cu file. I would actually remove the -dc from flags and be explicit here that I want to build object files.
$# is the name of the rule target. $< is the first prerequisite. Only one file at a time can be passed to nvcc with the -dc flag, so here $< is better than $^.
You may add the name of the executable in a variable so that you delete the same executable that you generated (and facilitate name change).
I added a .PHONY rule. This only removes the confusion that happens whenever someone writes a file named clean in the directory.
The Makefile can not differenciate between the file and the make clean rule.
CC=g++
CXXFLAGS= -fopenmp -O3 -Wextra -std=c++11
CUDAFLAGS= -std=c++11 -arch=sm_20
LIBS= -lopenblas -lpthread -lcudart -lcublas
LIBDIRS=-L/usr/local/cuda-7.5/lib64
INCDIRS=-I/usr/local/cuda-7.5/include
PROGRAM= test
%.o: %.cu
nvcc -dc $(CUDAFLAGS) $< -o $#
all: matrix_cuda.o
$(CC) -o $(PROGRAM) matrix_blas.cpp alg.cpp test.cpp matrix_cuda.o $(LIBDIRS) $(INCDIRS) $(LIBS) $(CXXFLAGS)
.PHONY: clean
clean:
rm -rf $(PROGRAM) *.o
I am having some confusion about how the '$<' and '$#' macros can be used with a list of elements. My ultimate goal is to compile a directory of C source files into executables with the same name, no extensions. Also I do not want to make object files.
Here is a simple makefile which I would like to upgrade using the macros.
CC = gcc -ansi -std=c99
CCFLAGS = -Wall -pedantic -O3
all : progA progB progC
progA : progA.c
$(CC) $(CCFLAGS) $< -o $#
progB : progB.c
$(CC) $(CCFLAGS) $< -o $#
progC : progC.c
$(CC) $(CCFLAGS) $< -o $#
This works fine, but I don't like the redundancy of the commands. I have found a workaround that works, and a near solution, but was hoping there might be a clear option.
workaround:
CC = gcc -ansi -std=c99
CCFLAGS = -Wall -pedantic -O3
PRGS := $(patsubst %.c,%,$(wildcard *.c))
all :
make $(PRGS)
% : *.c
$(CC) $(CCFLAGS) $#.c -o $#
What I don't like here is the call to make within the command. Running 'make' delivers a message in my terminal that looks something like this:
make[1]: Entering directory '/path/to/dir'
...actual commands...
make[1]: Leaving directory '/path/to/dir'
I am assuming this has to do with opening the same makefile and the [1] refers to the second file descriptor in the open file table (or something along those lines).
near solution:
CC = gcc -ansi -std=c99
CCFLAGS = -Wall -pedantic -O3
SRCS := $(wildcard *.c)
PRGS := $(patsubst %.c,%,$(SRCS))
all : $(PRGS)
$(PRGS) : $(SRCS)
$(CC) $(CCFLAGS) $< -o $#
This almost works, except it is always grabbing the first dependancy!
..... progA.c -o progA
..... progA.c -o progB
..... progA.c -o progC
So, does anyone have a cleaner method to my 'workaround' or perhaps a solution to my 'near solution'? Is there anyway to match the nth target to the nth dependency when running the command?
Thanks!
The $(PRGS): $(SRCS) change is just incorrect. It lists every source file as the prerequisites of every target.
You want to set the prerequisites of the all target to be every program you want built by default. To do that you want to use all: $(PRGS). Not a recipe of calling make again like you had originally.
(If you did want to keep the manual recursive call to make you could use make --no-print-directory on that call to avoid the message but that is still the wrong approach (and if you were going to do that you'd want to use $(MAKE) to handle arguments to the original make correctly.)
A second problem with your original makefile is the use of *.c in the prerequisite list of the % target. That sets the prerequisites of every target to be every *.c file in the directory. That's not what you want. You want each target to have its own .c file as its prerequisite.
You want:
all: $(PRGS)
%: %.c
$(CC) $(CCFLAGS) $#.c -o $#
That being said make has a built-in rule for exactly that foo.c -> foo compilation so you should just use that. That rule uses the $(CC) and $(CFLAGS) variables. So just set those to what you want and you are done.
So this makefile should do what you want. (Note how I moved some arguments to CFLAGS instead of CC. CC should generally, to my knowledge, by the compiler itself and not any arguments.)
CC = gcc
CFLAGS = -ansi -std=c99 -Wall -pedantic -O3
PRGS := $(patsubst %.c,%,$(wildcard *.c))
all : $(PRGS)
I need a makefile which get also the name of the file compile
For example:
make foo
and the makefile should compile foo.c to foo.
This is my makefile. How to change it?
all: out
out: out.o
gcc -g -m32 -Wall -o out out.o
out.o: out.c
gcc -m32 -g -Wall -ansi -c -o out.o out.c
.PHONY: clean
#Clean the build directory
clean:
rm -f *.o out
There is no direct way where you can pass arguments to the Makefile but instead you can take advantage of variables to achieve what you want. Check the modifications done to the Makefile below
NAME ?=out #Default binary generated is out if you dont pass any argument
${NAME}: ${NAME}.o
gcc -g -m32 -Wall -o ${NAME} ${NAME}.o
${NAME}.o: ${NAME}.c
gcc -m32 -g -Wall -ansi -c -o ${NAME}.o out.c
.PHONY: clean
#Clean the build directory
clean:
`rm -f *.o ${NAME}`
And you should call the Makefile by typing
$ make NAME=foo
$ make clean NAME=foo
Passing arguments directly to Make is trivially easy.
Your current makefile can be invoked with make foo, and will compile foo.c to produce foo, because Make has implicit rules for handling cases like foo.c => foo; there will be no error even though "foo" is not the target of any rule. (At least, this is the case with GNU Make 3.81, which is what I am using.)
If you want to control the choice of compiler and flags (as in your out rule), there is more than one way to do it. The simplest (though not strictly the best) is to modify a couple of variables in the makefile:
CC = gcc
CFLAGS = -g -m32 -Wall -ansi
Another option is to override the implicit rule with a pattern rule of your own:
%: %.c
gcc -g -m32 -Wall -ansi -o $# $<
If you want it to build foo.o in a separate step, you must split the rule into two rule-- and also put in a rule with no recipe to cancel Make's implicit rule:
%: %.o
gcc -g -m32 -Wall -o $# $^
%.o: %.c
gcc -m32 -g -Wall -ansi -c -o $# $<
%: %.c
Further refinements are possible, once you have mastered the basics.
Lets say I have files:
Libs:
one.cpp, one.h
two.cpp, two.h
three.cpp, three.h
Program:
program.cpp
Is there way, to create Makefile which will compile only that *.cpp which were modified from last compilation?
Currently I have something like that:
SRCS = one.cpp two.cpp three.cpp
OBJS = $(SRCS:.cpp=.o)
all: $(OBJS) program
.cpp.o:
g++ -Wall -c $<
program:
g++ -Wall $(OBJS) program.cpp -o program
clean:
rm -f $(OBJS) program
I works fine, but when I compile my program and then change two.cpp or two.h I need to run "make clean" first, because when I secondly run "make" I get:
Nothing to be done for 'all'.
I would like to change my Makefile in that way, it would recognize my changes and recompile that file and its dependencies (if one.cpp uses code from two.cpp which was modified, both files should be recompiled).
So if I modify two.cpp, make should do:
g++ -Wall -c two.cpp
g++ -Wall $(OBJS) program.cpp -o program
But if one.cpp uses code from two.cpp which was modified, make shold do:
g++ -Wall -c one.cpp
g++ -Wall -c two.cpp
g++ -Wall $(OBJS) program.cpp -o program
First we make the object files prerequisites of the executable. Once this is done, Make will rebuild program whenever one of the SRCS changes, so we don't need OBJS as an explicit target:
all: program
program: $(OBJS)
g++ -Wall $(OBJS) program.cpp -o program
Then we make the header files prerequisites of the objects, so that if we change three.h, Make will rebuild three.o:
$(OBJS): %.o : %.h
And finally since one.cpp uses code from two.cpp by means of two.h (I hope), we make two.h a prerequisite of one.o:
one.o: two.h
And to make things cleaner and easier to maintain we use automatic variables:
program: $(OBJS)
g++ -Wall $^ program.cpp -o $#
Put it all together and we get:
SRCS = one.cpp two.cpp three.cpp
OBJS = $(SRCS:.cpp=.o)
all: program
$(OBJS): %.o : %.h
one.o: two.h
.cpp.o:
g++ -Wall -c $<
program: $(OBJS)
g++ -Wall $^ program.cpp -o $#
clean:
rm -f $(OBJS) program
There are a few more things we could do (like adding program.o to OBJS), but this is enough for today.
Add the files a command depends upon to run to the right of the target name.
Example:
default: hello.c
gcc -o hello.bin hello.c
install: hello.bin
cp hello.bin ../
All you need to do is tell make that the .o file depends on the .cpp file:
%.cpp.o: %.cpp
g++ -Wall -c -o $# $<