How do I build simple boost program on Mac OS (Lion) - boost

Steps:
1. sudo port boost
The boost file installed in /opt/local/boost, library files are in /opt/local/lib
2. use XCode to create c++ project
#include <iostream>
#include <boost/asio.hpp>
int main () {
return 0;
}
3. set XCode to find out boost
in "Build Settings" -> "HEADER_SEARCH_PATHS"
in both Debug and Release add path /opt/local/include
4. "Build Settings" -> "LIBRARY_SEARCH_PATHS" --> add /opt/local/lib both for debug and release.
5. build program and failed.
Error Messages,
Undefined symbols for architecture x86_64:
"boost::system::generic_category()", referenced from:
___cxx_global_var_init1 in main.o
___cxx_global_var_init2 in main.o
"boost::system::system_category()", referenced from:
___cxx_global_var_init3 in main.o
boost::asio::error::get_system_category() in main.o
"boost::asio::error::get_netdb_category()", referenced from:
___cxx_global_var_init5 in main.o <br>
"boost::asio::error::get_addrinfo_category()", referenced from:
___cxx_global_var_init6 in main.o <br>
"boost::asio::error::get_misc_category()", referenced from:
___cxx_global_var_init7 in main.o <br>
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Am I wrong in the procedure?

You need to link with Boost.System, which should be in /opt/local/lib/libboost_system (with some suffix, that depends on how you built boost)
Add that to your Xcode project.

select on your "targets"
in "Link Binary with libraries" section under "build phases" tab, add boost library.
if install via MacPort, the boost will be at /opt/local/lib,
if install via brew, the boost will be at /usr/local/Cellar/boost ,
if build by yourself, it will be at /usr/local/lib by default or yourBoostLib/stage/lib

Related

Undefined Symbols when linking project with GLFW3 using CMake on OSX

I am following this guide on how to build a project using GLFW3 with CMake on OSX 10.9.1, and I've run into some trouble. When I get to building the actual project I get the following errors:
$ make
Scanning dependencies of target Graphics
[100%] Building CXX object CMakeFiles/Graphics.dir/graphics.cpp.o
Linking CXX executable Graphics
Undefined symbols for architecture x86_64:
"_glBegin", referenced from:
_main in graphics.cpp.o
"_glClear", referenced from:
_main in graphics.cpp.o
"_glColor3f", referenced from:
_main in graphics.cpp.o
"_glEnd", referenced from:
_main in graphics.cpp.o
"_glLoadIdentity", referenced from:
_main in graphics.cpp.o
"_glMatrixMode", referenced from:
_main in graphics.cpp.o
"_glOrtho", referenced from:
_main in graphics.cpp.o
"_glRotatef", referenced from:
_main in graphics.cpp.o
"_glVertex3f", referenced from:
_main in graphics.cpp.o
"_glViewport", referenced from:
_main in graphics.cpp.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[2]: *** [Graphics] Error 1
make[1]: *** [CMakeFiles/Graphics.dir/all] Error 2
make: *** [all] Error 2
My CMakeLists.txt looks like:
cmake_minimum_required (VERSION 2.8)
project (Graphics)
# The version number.
set (Graphics_VERSION_MAJOR 1)
set (Graphics_VERSION_MINOR 0)
# configure a header file to pass some of the CMake settings
# to the source code
configure_file (
"${PROJECT_SOURCE_DIR}/GraphicsConfig.h.in"
"${PROJECT_BINARY_DIR}/GraphicsConfig.h"
)
# add the binary tree to the search path for include files
# so that we will find GraphicsConfig.h
include_directories("${PROJECT_BINARY_DIR}")
find_package(PkgConfig REQUIRED)
pkg_search_module(GLFW REQUIRED glfw3)
include_directories(${GLFW_INCLUDE_DIRS})
# add the executable
add_executable (Graphics graphics.cpp)
target_link_libraries(Graphics ${GLFW_STATIC_LIBRARIES})
# add the install targets
install (TARGETS Graphics DESTINATION bin)
install (FILES "${PROJECT_BINARY_DIR}/GraphicsConfig.h"
DESTINATION include)
However can build the project just fine using
cc `pkg-config --cflags glfw3` -o graphics graphics.cpp \
`pkg-config --static --libs glfw3`
I can't offer you an explanation for why one links with the OpenGL libs and the other doesn't, but the following solution worked for me with a similar problem on OSX (Mountain Lion).
At the end of the 'add executable' block, add an Apple-specific condition to link with the OpenGL framework:
# add the executable
add_executable (Graphics graphics.cpp)
target_link_libraries(Graphics ${GLFW_STATIC_LIBRARIES})
if (APPLE)
target_link_libraries(Graphics "-framework OpenGL")
endif()
I figured there must be something in the GLFW CMake config that was responsible for linking with the OpenGL libs so I had a look at the GLFW 3.0.4 CMakeLists.txt and found that '-framework' line.
This will only help you on OSX - you'd need to supply other platform specific ways of linking to make it cross platform.
You may have already considered it, but the same guide also provides a way to include the GLFW source with your app and build it that way. That's probably the easiest way to guarantee cross-platform compatibility.
I had to do this.
elseif(APPLE)
# GLFW
find_package(glfw3 REQUIRED)
include_directories(${GLFW_INCLUDE_DIRS})
find_package(GLEW REQUIRED)
include_directories(${GLEW_INCLUDE_DIRS})
# app_framework executable
add_executable(app_framework ${SOURCE_FILES})
target_link_libraries(app_framework app_framework_library ${GLEW_LIBRARY} glfw3)
target_link_libraries(app_framework "-framework OpenGL")
Note that I use "glfw3" instead of ${GLFW_STATIC_LIBRARIES} in target_link_library. Did not work for me otherwise.
I'm using cmake 3.6.1.
Add this to your CMakeFile,
add_executable(${LOCAL_PROJECT_NAME} )
#openGL Specific
target_link_libraries(${LOCAL_PROJECT_NAME} ${GLFW_STATIC_LIBRARIES})
find_package(glfw3 3.3 REQUIRED)
target_link_libraries(${LOCAL_PROJECT_NAME} glfw)
find_package(OpenGL REQUIRED)
target_link_libraries(${LOCAL_PROJECT_NAME} OpenGL::GL)
also, make sure compiler options are set accordingly.

A build error occurred when I used Xcode to compile a example 'sync_client' of boost

I used Xcode to build a example of boost, but as you see followed it is failed. And the error
I've got is:
Undefined symbols for architecture x86_64:
"boost::system::system_category()", referenced from:
___cxx_global_var_init2 in sync_client.o
boost::asio::error::get_system_category() in sync_client.o
boost::system::error_code::error_code() in sync_client.o
"boost::system::generic_category()", referenced from:
___cxx_global_var_init in sync_client.o
___cxx_global_var_init1 in sync_client.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
I don't know how I can fix it. I've added the include and libs path of boost into Xcode Build Setting. Does anyone have any idea about this problem?
Either link against a pre-built version of libboost-system.so or pull in libs/system/src/error_code.cpp (from your boost source package), into your project.

Linking protocol buffers library in XCode

I want to use Google Protocol Buffers for C++ in XCode.
This is my directory where I have the library: /Developer/Protobuf.
What I did inside this directory, is compiled the .proto and produced the .pb.h & .pb.cc files. After this produced the object file:
clang++ -arch x86_64 -I./src -I./ -c file.pb.cc
Then:
ar -r file.pb.a file.pb.o
In XCode, in Build Phases -> Link Binary With Libraries I have added file.pb.a static library. In Build Settings -> Header Search Paths I have added /Developer/Protobuf/src. In Build Settings -> Librabry Search Paths I have added /Developer/Protobuf. In Build Settings -> User Header Search Paths I have added also /Developer/Protobuf/src.
But when I compiled the project I always get this kind of errors:
Undefined symbols for architecture x86_64:
"google::protobuf::DescriptorPool::generated_pool()", referenced from:
musicbrainz::protobuf_AssignDesc_musicbrainz_2eproto() in musicbrainz.pb.o
"google::protobuf::DescriptorPool::InternalAddGeneratedFile(void const*, int)", referenced from:
musicbrainz::protobuf_AddDesc_musicbrainz_2eproto() in musicbrainz.pb.o
"google::protobuf::MessageFactory::generated_factory()", referenced from:
musicbrainz::protobuf_AssignDesc_musicbrainz_2eproto() in musicbrainz.pb.o
"google::protobuf::MessageFactory::InternalRegisterGeneratedFile(char const*, void (*)(std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&))", referenced from:
musicbrainz::protobuf_AddDesc_musicbrainz_2eproto() in musicbrainz.pb.o
.................................................................................
Maybe I am not creating the static library correct ?
First of all, you need to compile the Protocol Buffers static libraries using their makefiles, and then, link in the static libraries into your project. You should not be pulling in their source code into your Xcode project.
When linking the libraries into my project, I had the same 'undefined symbols' errors as you. Based on comment #19 in this discussion, running the following commands when building the Protocol Buffers libraries will make them go away.
$ ./configure CC=clang CXX="clang++ -std=c++11 -stdlib=libc++" CXXFLAGS="-O3" --disable-shared
$ make

Xcode 4 FLTK 1.3.0 undefined architecture x86_64

Hi, I am using Xcode 4 and trying to set up FLTK 1.3.0 to run Bjarne
Stroustrup's Chapter 12 FLTK Demo at the end of the chapter. I keep
getting the following error when compiling, and have no idea where to go.
I have an idea it might have to do with the linker flags, but I don't know
what flag to add and where...
Here's the error:
Undefined symbols for architecture x86_64:
"Fl_JPEG_Image::Fl_JPEG_Image(char const*)", referenced from:
Graph_lib::Image::Image(Point, String,
Graph_lib::Suffix::Encoding) in Graph.o
"Fl_GIF_Image::Fl_GIF_Image(char const*)", referenced from:
Graph_lib::Image::Image(Point, String,
Graph_lib::Suffix::Encoding) in Graph.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see
invocation)
Are you passing the linker flags present with --use-images? try:
> fltk-config --use-images --ldflags
and check the results to make sure you're getting either the system image libs, or the ones optionally built with fltk.
I also found this to be quite useful:
fltk-config --compile test.cpp
It worked perfectly for me.
For more examples of using fltk-config check out http://www.fltk.org/doc-1.1/basics.html

xcode 3.0 - file is not of required architecture

I am using Xcode 3.0 to compile a test C program using CFITSIO library.
Following advice I have encountered from previous posts, I have built CFITSIO as a universal library, and added the fitsio.h and libcfitsio.a files to my project. I have verified I am using the correct build (x86_64). I have verified the libcfitsio.a file is under the Target > Link Binary with Libraries tab. I continue to receive the following error.
A previously created project using cfitsio works - I wasn't the one to link the library.
Also, I can link cfitsio successfully from terminal.
Any suggestions?
Building target “test1” of project “test1” with configuration “Release”
Checking Dependencies
ld /Users/jacqueline/test1/build/test1.build/Release/test1.build/Objects-normal/ppc/test1 normal ppc
cd /Users/jacqueline/test1
/Developer/usr/bin/gcc-4.0 -o /Users/jacqueline/test1/build/test1.build/Release/test1.build/Objects-normal/ppc/test1 -L/Users/jacqueline/test1/build/Release -L/Users/jacqueline/test1 -L/Users/jacqueline/test1/cfitsio/build/i386 -L/Users/jacqueline/test1/cfitsio/build/ppc -L/Users/jacqueline/test1/cfitsio/build/x86_64 -L/Users/jacqueline/test1/cfitsio/lib -L/Users/jacqueline/test1/cfitsio -F/Users/jacqueline/test1/build/Release -filelist /Users/jacqueline/test1/build/test1.build/Release/test1.build/Objects-normal/ppc/test1.LinkFileList -lcfitsio -arch ppc -mmacosx-version-min=10.5 -isysroot /Developer/SDKs/MacOSX10.5.sdk
ld: warning in /Users/jacqueline/test1/libcfitsio.a, file is not of required architecture
Undefined symbols:
"_ffopentest", referenced from:
_main in main.o
"_ffclos", referenced from:
_main in main.o
"_ffgrec", referenced from:
_main in main.o
"_ffghsp", referenced from:
_main in main.o
"_ffrprt", referenced from:
_main in main.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
It seems as though the library is not fully universal. Try building your project for just one of the architectures at a time (i.e., just ppc, ppc64, i386, and x86-64 separately). When (if) one of them fails, you know which architecture your library is missing so you can recompile it with that. (Or, alternatively, if you don't intend to deploy on that architecture, you can just not compile for it. For instance, there's no real point in building PPC 64 unless you really will benefit from it, as the only machines that will run it are G5s, and they'll run plain old PPC 32-bit code just fine.)
Once I edited Xcode
'Project' > 'Edit Project Settings' > 'Architecture'
to not include PPC, which seemed to be there by default, the build succeeded. I am running OSX 10.5.8 on Intel Core 2 Duo.
Previously I had been using various builds of the cfitsio library itself, and not changing the default architecture on my Xcode project.

Resources