I am using Birt with Eclipse Indigo.
I am using a table in the report. The table will get values from the dataset. I want to convert the numbers to Persian numbers. I tried using java script but it doesn't work.
var number = dataSetRow["invoice-number"];
var farsiNumber=new Array();
farsiNumber[0]='\u06f0';
farsiNumber[1]='\u06f1';
farsiNumber[2]='\u06f2';
farsiNumber[3]='\u06f3';
farsiNumber[4]='\u06f4';
farsiNumber[5]='\u06f5';
farsiNumber[6]='\u06f6';
farsiNumber[7]='\u06f7';
farsiNumber[8]='\u06f8';
farsiNumber[9]='\u06f9';
var outputNumber = "";
for(var i=0;i<number.length;i++) {
var ch = number.charAt(i);
var index = farsiNumber[ch];
if(ch >= 0 && ch <= 9)
outputNumber = outputNumber+index;
else
outputNumber = outputNumber+ch;
}
this.data = outputNumber;
Is there any other way of doing it or should I create a plugin for the Birt Functions plugin to do this.
Use this JavaScript function to convert numbers to Persian:
function toPersianNumber(num){
var persianNumberArray = new Array('۰','۱','۲','۳','۴','۵','۶','۷','۸','۹')
var res = ''
while(num/10 > 0){
n = num%10
num = parseInt(num/10)
res = persianNumberArray[n] + res
}
return res
}
I'm using this function for a better performance :)
function toPersianChar(str) {
var map = ["\u0660","\u0661","\u0662","\u0663","\u0664", "\u0665","\u0666","\u0667","\u0668","\u0669"]
var replaceDigits = str.replace(/\d(?=[^<>]*(<|$))/g, function($0) { return map[$0]});
return(replaceDigits);
};
Related
Is there a way to filter the data in column Q off my google sheet faster then reading line one by one. There is daily about 400+ lines it needs to scan through and I need to delete every row of data if the data in column Q is less than 1 right now watching it, it takes about 10+ minutes.
function UpdateLog() {
var returnSheet = SpreadsheetApp.getActiveSpreadsheet().getSheetByName('CancelRawData');
var rowCount = returnSheet.getLastRow();
for (i = rowCount; i > 0; i--) {
var rrCell = 'Q' + i;
var cell = returnSheet.getRange(rrCell).getValue();
if (cell < 1 ){
returnSheet.deleteRow(i);
}
}
{
SpreadsheetApp.getUi().alert("🎉 Congratulations, your data has been updated", SpreadsheetApp.getUi().ButtonSet.OK);
}
}
Try it this way:
function UpdateLog() {
const ss = SpreadsheetApp.getActive();
const sh = ss.getSheetByName('Sheet0');
const vs = sh.getDataRange().getValues();
let d = 0;
vs.forEach((r, i) => {
if (!isNaN(r[16]) && r[16] < 1){
sh.deleteRow(i + 1 - d++);
}
});
}
This is a bit quicker
function UpdateLog() {
const ss = SpreadsheetApp.getActive();
const sh = ss.getSheetByName('Sheet0');
const vs = sh.getDataRange().getValues().filter(r => !isNaN(r[16]) && r[16] < 1);
sh.clearContents();
sh.getRange(1,1,vs.length,vs[0].length).setValues(vs);
}
I have a for loop which is working on my google sheet but it takes around 5 minutes to filter through the 2100 rows of data. I have read about using filters and getting rid of the for loop all together but I'm fairly new to coding in Google Script and haven't been able to get my head around the syntax for this. Any advice greatly appreciated.
Code below:
function Inspect() {a
var sSheet = SpreadsheetApp.getActiveSpreadsheet();
var srcSheet = sSheet.getSheetByName("Inventory");
var tarSheet = sSheet.getSheetByName("Inspections");
var lastRow = srcSheet.getLastRow();
for (var i = 2; i <= lastRow; i++) {
var cell = srcSheet.getRange("A" + i);
var val = cell.getValue();
if (val == true) {
var srcRange = srcSheet.getRange("B" + i + ":I" + i);
var clrRange = srcSheet.getRange("A" + i);
var tarRow = tarSheet.getLastRow();
tarSheet.insertRowAfter(tarRow);
var tarRange = tarSheet.getRange("A" + (tarRow+1) + ":H" + (tarRow+1));
var now = new Date();
var timeRange = tarSheet.getRange("I"+(tarRow+1));
timeRange.setValue(now);
srcRange.copyTo(tarRange);
clrRange.clear();
//tarRange.activate();
timeRange.offset(0, 1).activate();
}
}
};
Yes, to speed-up you will need to get all the values first and apply your logic to the obtained 2D-arrays instead of cells, at the end you will use setValues to update your sheet. I would go for something like this:
function Inspect() {
var sSheet = SpreadsheetApp.getActiveSpreadsheet();
var srcSheet = sSheet.getSheetByName("Inventory");
var tarSheet = sSheet.getSheetByName("Inspections");
var srcLastRow = srcSheet.getLastRow();
var tarLastRow = tarSheet.getLastRow();
var srcArray = srcSheet.getRange(1,1,srcLastRow,9).getValues();//(A1:I(lastrow))
var tarArray = tarSheet.getRange(1,1,tarLastRow,9).getValues();//(A1:I(lastrow))
for (var i = 1; i < srcArray.length; i++) {
var val = srcArray[i][0];
if (val == true) {
var copyValues = srcArray[i].slice(1);//Get all elements from the row excluding first column (srcSheet.getRange("B" + i + ":I" + i);)
var now = new Date();
copyValues[8]=now;//set the time on column 9 (array starts at position 0!)
var tarNewLine = copyValues;
tarArray.push(tarNewLine);
//clear values on source (except column A):
for(var j=1;j<srcArray[i].length;j++){
srcArray[i][j]="";
}
}
}
tarSheet.clear();
tarSheet.getRange(1, 1,tarArray.length,tarArray[0].length).setValues(tarArray);
srcSheet.clear();
srcSheet.getRange(1, 1,srcArray.length,srcArray[0].length).setValues(srcArray);
};
You cannot get around a loop, but you should reduce the number of calls to the SpreadsheetApp to a minimum, see Apps Script Best Practices
It is not the for loop, but those calls that make your code slow. Instead, work with arrays as much as you can. Loops become of a problem if they are nested - this is also something you should avoid.
Sample how to perform most calls to SpreadsheetApp outside of the loop and work with arrays:
function Inspect() {
var sSheet = SpreadsheetApp.getActiveSpreadsheet();
var srcSheet = sSheet.getSheetByName("Inventory");
var tarSheet = sSheet.getSheetByName("Inspections");
var lastRow = srcSheet.getLastRow();
var Acolumn = srcSheet.getRange("A2:A" + lastRow);
var Avalues = Acolumn.getValues();
var srcRange = srcSheet.getRange("B2:I" + lastRow);
var srcValues = srcRange.getValues();
var array = [];
var now = new Date();
for (var i = 0; i < lastRow-1; i++) {
var val = Avalues[i][0];
if (val == true) {
srcValues[i].push(now);
array.push(srcValues[i]);
var clrRange = Acolumn.getCell(i+1, 1);
clrRange.clear();
}
}
var tarRow = tarSheet.getLastRow();
tarSheet.insertRowAfter(tarRow);
if(array.length!=0){
var tarRange = tarSheet.getRange("A" + (tarRow+1) + ":I" + (tarRow + array.length));
tarRange.setValues(array);
}
};
I'm creating a social media outreach tracker. I want to create a drop-down list of the contact name. The problem is that I have two sources of names on two different sheets.
I wrote a script that pulls the names from the two different sources and combines them to a single array.
I was hoping to set the source range as that array.
Here is my code:
function setDataValid_(range, sourceRange) {
var rule = SpreadsheetApp.newDataValidation()
.requireValueInRange(sourceRange, true)
.build();
range.setDataValidation(rule);
}
function onEdit() {
var auditionsSheet = SpreadsheetApp.getActiveSpreadsheet();
var castingDirectorsTab = auditionsSheet.getSheetByName("Casting Directors");
var contactsTab = auditionsSheet.getSheetByName("Contacts");
var socialMediaOutreachTab = auditionsSheet.getSheetByName("Social Media Outreach");
var lastRowCD = castingDirectorsTab.getLastRow();
var lastRowContacts = contactsTab.getLastRow();
var activeCell = socialMediaOutreachTab.getActiveCell();
var activeColumn = activeCell.getColumn();
// get data
var castingDirectorNameData = castingDirectorsTab.getRange(2, 1, lastRowCD, 1).getValues();
var contactNameData = contactsTab.getRange(2, 1, lastRowContacts, 1).getValues();
//get name data to a single arrays
var castingDirectorName = [];
castingDirectorNameData.forEach(function(yr) {
castingDirectorName.push(yr[0]);
});
var contactName = [];
contactNameData.forEach(function(yr) {
contactName.push(yr[0]);
});
// get rid of the empty bits in the arrays
for (var x = castingDirectorName.length-1; x > 0; x--) {
if ( castingDirectorName[x][0] === undefined ) {
castingDirectorName.splice( x, 1 )
}
}
for (var x = contactName.length-1; x > 0; x--) {
if ( contactName[x][0] === undefined ) {
contactName.splice( x, 1 )
}
}
//combine two data sources for data validation
var combinedNames = [];
combinedNames.push(castingDirectorName + contactName);
Logger.log (combinedNames);
Logger.log( typeof combinedNames);
// data validation set up and build
if (activeColumn == 1 && auditionsSheet.getName() == "Social Media Outreach") {
var range = auditionsSheet.getRange(activeCell.getRow(), activeColumn +1);
var sourceRange = combinedNames;
setDataValid_(range, sourceRange)
}
}
When I enter a date in Col A on Social Media Outreach, nothing happens in Col 2.
I was using an existing working nested data validation script I have but the sourceRange pulls from a sheet based on the value in the active cell. Here is that code:
function setDataValid_(range, sourceRange) {
var rule = SpreadsheetApp.newDataValidation()
.requireValueInRange(sourceRange, true)
.build();
range.setDataValidation(rule);
}
function onEdit() {
var aSheet = SpreadsheetApp.getActiveSheet();
var aCell = aSheet.getActiveCell();
var aColumn = aCell.getColumn();
// data validation for Auditions Tab Projet Type to Project Details
if (aColumn == 9 && aSheet.getName() == 'Auditions') {
var range = aSheet.getRange(aCell.getRow(), aColumn + 1);
var sourceRange = SpreadsheetApp.getActiveSpreadsheet().getRangeByName('RefTables!' + aCell.getValue())
setDataValid_(range, sourceRange)
}
}
For this script when I select from the data validation drop-down, a new data validation comes up in the next col with the appropriate secondary data validation.
So the question is, can the source range be set to an array or do I need to put the names back into my sheet to reference a la the second script.
I've looked through the documentation and searched and can't find an answer. I'm relatively new to GAS and am not sure of all the inner workings of the data validation builder.
I have a problem with charsets.
I parsed a csv file in google-app-engine and I'm posting to an uiapp table.
But I checked special characters like áéíóú and those are not well displayed (?square symbol).
When I was setting up my code I played writing the string imported to a google docs document and it worked the same.
some advice please?
I search for:
a global charset definition to the code. or
string var transformation that makes the chars appear like I want to. (avoiding html &number definitions.
Is this related to the blob object?
The thing is important i come from spain and we need such characters.
app that get's a csv ';' delimited file and shows it's content
I post all my code, it's barely as the tutorial that is given.
function arreglaUrl(cadena){
var texto = cadena[cadena.length - 2]
if (texto == ''){
cadena[cadena.length - 2] = 'Sin enlace';
}
else{
cadena[cadena.length - 2] = '<center>Link.</center>' ;
};
}
function parsedCSV(){
var listaArchivos = DocsList.getFolderById('XXXXX').getFiles()
for (var i = 0; i < listaArchivos.length; i++) {
if (listaArchivos[i].getName() == 'baul.csv'){
var origen = listaArchivos[i];
};
}
var texto = origen.getContentAsString();
var arra = Utilities.parseCsv(texto,";");
return(arra);
}
function doGet() {
var datos = parsedCSV()
var baul = Charts.newDataTable()
for (i = 0; i < datos[0].length; i++){
baul.addColumn(Charts.ColumnType.STRING, datos[0][i])
}
for (i = 1; i < datos.length; i++){
arreglaUrl(datos[i]) // this only makes some html i need to post some links
baul.addRow(datos[i])
}
baul.build();
var sectorFilter = Charts.newCategoryFilter()
.setFilterColumnLabel("sector")
.build();
var tipoFilter = Charts.newCategoryFilter()
.setFilterColumnLabel("tipo")
.build();
var searchFilter = Charts.newStringFilter()
.setFilterColumnLabel("Titulo")
.build();
var searchDesc = Charts.newStringFilter()
.setFilterColumnLabel("descripcion")
.build();
var tableChart = Charts.newTableChart().setOption('allowHtml', true).setDimensions(0,0)
.build();
var dashboard = Charts.newDashboardPanel()
.setDataTable(baul)
.bind([sectorFilter, tipoFilter, searchFilter, searchDesc], [tableChart])
.build();
var uiApp = UiApp.createApplication().setTitle('Baul de Recursos');
var anchoTotal = '100%';
dashboard.add(uiApp.createVerticalPanel()
.add(uiApp.createHorizontalPanel()
.add(sectorFilter)
.add(tipoFilter)
.setSpacing(15)
)
.add(uiApp.createHorizontalPanel()
.add(searchFilter)
.add(searchDesc)
.setSpacing(15)
)
.add(uiApp.createHorizontalPanel()
.add(tableChart).setBorderWidth(1).setHorizontalAlignment(UiApp.HorizontalAlignment.CENTER).setWidth(anchoTotal)
)
);
uiApp.add(dashboard);
return uiApp;
}
I found it, we need to get the content of the file first with a Blob object.
This function is the one I use to parse some csv info into an array:
function parsedCSV(){
//searching the file. This gets only one file in var origen
var listaArchivos = DocsList.getFolderById('XXXXXXX').getFiles()
for (var i = 0; i < listaArchivos.length; i++) {
if (listaArchivos[i].getName() == 'baul.csv'){
var origen = listaArchivos[i];
};
}
// HERE IS THE GOOD DEFINITION OF CHAR:
var texto2= origen.getBlob().getDataAsString('ISO-8859-1');
// I put all the corrected text in an array
var arra = Utilities.parseCsv(texto2,";");
return(arra);
}
This is the solved thing: https://script.google.com/macros/s/AKfycbyHa-bLWBHBr3qifbvzxecqGgGUYX8mhyo-TKoyfGvy/exec
The trick:
var textVariableName = fileObjectVariableName.getBlob().getDataAsString('ISO-8859-1');
I want to set i to 0 of the first item from a json criteria, eg. if the criteria is green in this case the i will start from 3... if criteria = blue it will start on 2... i need to set it to start from 0 or 1 whether it is.. also how to count total of a criteria, eg. green total is 2,, blue=1, red=2... thanks in advance!
var myBox_html ="";
var i = 0;
function createDiv(1x,2x,3x) {
A = '<something>'+1x;
B = '<something>'+2x;
C = '<something>'+3x;
myBox_html += '<something-more>'+A+B+C;
}
criteria // is a parameter from url, in this case means green
get_it = function(doc) {
var jsonData = eval('(' + doc + ')');
for (var i=0; i<jsonvar.name.length; i++) {
var 1x = jsonvar.name[i].1;
var 2x = jsonvar.name[i].2;
var 3x = jsonvar.name[i].3;
if (1x == criteria){
var Div = createDiv(1x,2x,3x);
} else {null}
}
document.getElementById("myBox").innerHTML = myBox_html;
}
get_it();
json should look like this:
var jsonvar = {"name":[{"1":"red","2":"round","3":"fruit"},{"1":"red","2":"squared","3":"box"},{"1":"blue","2":"squared","3":"box"},{"1":"green","2":"squared","3":"box"},{"1":"green","2":"pear","3":"fruit"}]};
Consider several solutions:
1: Generate criteria-grouped JSON response on the server-side. E.g.
var jsonvar = '{"name":{
"red": [{"1":"red","2":"round","3":"fruit"}, {"1":"red","2":"squared","3":"box"}],
"blue": [{"1":"blue","2":"squared","3":"box"}],
"green":[{"1":"green","2":"squared","3":"box"}, {"1":"green","2":"pear","3":"fruit"}]}}';
2: Convert you JSON array to criteria-grouped format as defined above. Here is sample routine for such a grouping:
function group_elements (arr) {
var result = {};
for (var i=0; i < arr.length; i++) {
if (!result[arr[i][1]]) {
result[arr[i][1]] = [];
}
result[arr[i][1]].push(arr[i]);
}
return result;
}
Both solutions allows you to iterate only filtered records and count length of group.