I'm currently studying regex (using ruby) and I would like to find the first occurrence of a non-digit character inside a word and make it capitalized.
I've been trying with:
word.gsub!(/\D{0,1}/) do |w|
w.capitalize
end
hoping it would just catch the first occurrence of a non-digit, but instead it returns all of the letters capitalized.
What's the correct way to do this?
Many thanks!!!
The g in gsub! stands for "global," meaning "every occurrence in the string." You want regular sub! instead. That'll just find the first. Cheers!
Related
Can someone help me with Ruby regex to check any word with letters starting with t and ending with r and replace with word Twitter? Thank you
I find that Rubular is very useful for working out how regexes work in Ruby.
You have two questions here. First, what regex will recognise what you want. Second, how to replace that found string with something else.
Your regex will be something like /\bt\w*r\b/. The elements here are \b, which is a word boundary. Then, we have the letter t, then any number of word characters \w*, then the letter r, and finally another word boundary \b. (Without the word-boundary characters, your regex will find t...r inside other words, too, so will work on things like 'stress', 'stirs' etc.
To do the replacement you want the gsub method.
new_string = your_string.gsub(/\bt\w*r\b/i, 'Twitter')
This will substitute the string Twitter for the found regex. The i on the end of the regex makes it case-insensitive - omit this if you want it to only find the lower-case text as in the regex.
So I have a string that looks like this:
#jackie#test.com, #mike#test.com
What I want to do is before any email in this comma separated list, I want to remove the #. The issue I keep running into is that if I try to do a regular \A flag like so /[\A#]+/, it finds all the instances of # in that string...including the middle crucial #.
The same thing happens if I do /[\s#]+/. I can't figure out how to just look at the beginning of each string, where each string is a complete email address.
Edit 1
Note that all I need is the regex, I already have the rest of the stuff I need to do what I want. Specifically, I am achieving everything else like this:
str.gsub(/#/, '').split(',').map(&:strip)
Where str is my string.
All I am looking for is the regex portion for my gsub.
You may use the below negative lookbehind based regex.
str.gsub(/(?<!\S)#/, '').split(',').map(&:strip)
(?<!\S) Negative lookbehind asserts that the character or substring we are going to match would be preceeded by any but not of a non-space character. So this matches the # which exists at the start or the # which exists next to a space character.
Difference between my answer and hwnd's str.gsub(/\B#/, '') is, mine won't match the # which exists in :# but hwnd's answer does. \B matches between two word characters or two non-word characters.
Here is one solution
str = "#jackie#test.com, #mike#test.com"
p str.split(/,[ ]+/).map{ |i| i.gsub(/^#/, '')}
Output
["jackie#test.com", "mike#test.com"]
Consider this example string:
mystr ="1. moody"
I want to capitalize the first letter that occurs in mystr. I am trying this regular expression in Ruby but still returns all the letters in mystr (moody) instead of the letter m only.
puts mystr.scan(/[a-zA-Z]{1}/)
Any help appreciated!
Do as below using String#sub
(arup~>~)$ pry --simple-prompt
>> s = "1. moody"
=> "1. moody"
>> s.sub(/[a-z]/i,&:upcase)
=> "1. Moody"
>>
If you want to modify the source string use s.sub!(/[a-z]/,&:upcase).
Just for completeness, although it doesn’t directly answer your question as posed but could be relevant, consider this variation:
mystr ="1. école"
The line mystr.sub(/[a-z]/i,&:upcase) (as in Arup Rakshit’s answer) will match the second letter of the word, producing
1. éCole
The line mystr.sub /\b\s?[a-zA-Z]{1}/, &:upcase (diego.greyrobot’s answer) won’t match at all and so the line will be unchanged.
There are two problems here. The first is that [a-zA-Z] doesn’t match accented characters, so é isn’t matched. The fix for this is to use the \p{Letter} character property:
mystr.sub /\p{Letter}/, &:upcase
This will match the character in question, but won’t change it. This is due to the second problem, which is that upcase (and downcase) only works on characters in the ASCII range. This is almost as easy to fix, but relies on using an external library such as unicode_utils:
require 'unicode_utils'
mystr.sub(/\p{Letter}/) { |c| UnicodeUtils.upcase(c)}
This results in:
1. École
which is probably what is wanted in this case.
This may not affect you if you are sure all your data is just ASCII, but is worth knowing for other situations.
The reason your attempt returns all the letters is because you are using the scan method which does just that, it returns all the characters which match the regex, in your case letters. For your use case you should use sub since you only want to substitute 1 letter.
I use http://rubular.com to practice my Ruby Regexes. Here's what I came up with http://rubular.com/r/fAQEDFVEVn
The regex is: /\b[a-z]/
It uses \b to find a word boundary, and finally we ask for one letter only with [a-zA-Z]
Finally we'll use sub to replace it with its upcased version:
"1. moody".sub /\b[a-z]/, &:upcase
=> "1. Moody"
Hope that helps.
I'm not sure how to use regular expressions in a function so that I could grab all the words in a sentence starting with a particular letter. I know that I can do:
word =~ /^#{letter}/
to check if the word starts with the letter, but how do I go from word to word. Do I need to convert the string to an array and then iterate through each word or is there a faster way using regex? I'm using ruby so that would look like:
matching_words = Array.new
sentance.split(" ").each do |word|
matching_words.push(word) if word =~ /^#{letter}/
end
Scan may be a good tool for this:
#!/usr/bin/ruby1.8
s = "I think Paris in the spring is a beautiful place"
p s.scan(/\b[it][[:alpha:]]*/i)
# => ["I", "think", "in", "the", "is"]
\b means 'word boundary."
[:alpha:] means upper or lowercase alpha (a-z).
You can use \b. It matches word boundaries--the invisible spot just before and after a word. (You can't see them, but oh they're there!) Here's the regex:
/\b(a\w*)\b/
The \w matches a word character, like letters and digits and stuff like that.
You can see me testing it here: http://rubular.com/regexes/13347
Similar to Anon.'s answer:
/\b(a\w*)/g
and then see all the results with (usually) $n, where n is the n-th hit. Many libraries will return /g results as arrays on the $n-th set of parenthesis, so in this case $1 would return an array of all the matching words. You'll want to double-check with whatever library you're using to figure out how it returns matches like this, there's a lot of variation on global search returns, sadly.
As to the \w vs [a-zA-Z], you can sometimes get faster execution by using the built-in definitions of things like that, as it can easily have an optimized path for the preset character classes.
The /g at the end makes it a "global" search, so it'll find more than one. It's still restricted by line in some languages / libraries, though, so if you wish to check an entire file you'll sometimes need /gm, to make it multi-line
If you want to remove results, like your title (but not question) suggests, try:
/\ba\w*//g
which does a search-and-replace in most languages (/<search>/<replacement>/). Sometimes you need a "s" at the front. Depends on the language / library. In Ruby's case, use:
string.gsub(/(\b)a\w*(\b)/, "\\1\\2")
to retain the non-word characters, and optionally put any replacement text between \1 and \2. gsub for global, sub for the first result.
/\ba[a-z]*\b/i
will match any word starting with 'a'.
The \b indicates a word boundary - we want to only match starting from the beginning of a word, after all.
Then there's the character we want our word to start with.
Then we have as many as possible letter characters, followed by another word boundary.
To match all words starting with t, use:
\bt\w+
That will match test but not footest; \b means "word boundary".
Personally i think that regex is overkill for this application, simply running a select is more than capable of solving this particular problem.
"this is a test".split(' ').select{ |word| word[0,1] == 't' }
result => ["this", "test"]
or if you are determined to use regex then go with grep
"this is a test".split(' ').grep(/^t/)
result => ["this", "test"]
Hope this helps.
why this snippet:
'He said "Hello"' =~ /(\w)\1/
matches "ll"? I thought that the \w part matches "H", and hence \1 refers to "H", thus nothing should be matched? but why this result?
I thought that the \w part matches "H"
\w matches any alphanumerical character (and underscore). It also happens to match H but that’s not terribly interesting since the regular expression then goes on to say that this has to be matched twice – which H can’t in your text (since it doesn’t appear twice consecutively), and neither is any of the other characters, just l. So the regular expression matches ll.
You're thinking of /^(\w)\1/. The caret symbol specifies that the match must start at the beginning of the line. Without that, the match can start anywhere in the string (it will find the first match).
and you're right, nothing was matched at that position. then regex went further and found match, which it returned to you.
\w is of course matches any word character, not just 'H'.
The point is, "\1" means one repetition of the "(\w)" block, only the letter "l" is doubled and will match your regex.
A nice page for toying around with ruby and regular expressions is Rubular