PHP & MySql configuration are :
**MySql**
Server: Localhost via UNIX socket
Server version: 5.1.63-0ubuntu0.11.10.1
Protocol version: 10
User: root#localhost
MySQL charset: UTF-8 Unicode (utf8)
**Web Server**
Apache/2.2.20 (Ubuntu)
MySQL client version: 5.1.63
PHP extension: mysqli Documentation
I am using Ubuntu 11.10
When I tried to install Magento 1.7.0.0 I got following error message :
The requested URL /magento17/index.php/install/ was not found on this server.
Can somebody suggest me to solve this problem?
If you are install from root terminal, you can use sandard debian commands for packages. You can try find reason why it is not installed correctly. First try to find dependencies and that are installed correctly:
dpkg -s magento17 | grep Depends:
when you see the result try to find if all dependencies are installed in correct version like on this example:
dpkg -l apache2.2-comm
if it is correct you will see answer like4 this:
ii apache2.2-comm 2.2.16-6+squee Apache HTTP Server common files
If it is all correct installed than you should try to check if problem is in using correct relative link!
try to use
magento17/index.php/install/
Related
I've followed this (https://github.com/IntersectAustralia/acdata/wiki/Setting-up-OpenLDAP) tutorial for set up LDAP server in my local machine.
I've done all these steps
Installed Homebrew
Installed openldap using brew command, including berkeley db
Updated the slapd.conf file
Started the server using command "sudo /usr/local/libexec/slapd"
Now how do i know the LDAP server is running?
I tried a lot but i could'nt succeed,later i deiced to go with ADS (http://directory.apache.org/studio/). Its easy to set up. Believe me i made the installation and configuration in 5 mins. Thank you apache.
Use -d3 suffix.
Run sudo /usr/libexec/slapd -d3, it will show you the details.
(Raised issue https://github.com/gitlabhq/gitlabhq/issues/4659)
I got GitLab 5.4 using Bitnami Stack 5.4.0-0
In this version there's no way to create user without configuring mail server.
(In other words 5.4.0-0 is not ready to use out of box)
Password A temporary password will be generated and sent to user.
User will be forced to change it after first sign in
Where to configure what mail server use for GitLab open source git server?
UPDATE: GitLab 5.4 Installation instruction doesn't mention how to configure connection to mail server, but just how to install Postfix
**Note:** In order to receive mail notifications, make sure to install a
mail server. By default, Debian is shipped with exim4 whereas Ubuntu
does not ship with one. The recommended mail server is postfix and you can install it with:
sudo apt-get install -y postfix
Then select 'Internet Site' and press enter to confirm the hostname.
UPDATE 2: Running sudo apt-get install -y postfix on Bitnami Ubuntu gets
Package postfix is not available, but is referred to by another package. This may mean that package is missing, has been obsoleted, or is only available from another source
E: Package 'postfix' has no installation candidate
UPDATE 3: sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production output
[33mSystem information[0m
System: Debian wheezy/sid
Current User: git
Using RVM: no
Ruby Version: 1.9.3p448
Gem Version: 1.8.24
Bundler Version:1.3.5
Rake Version: 10.0.3
[33mGitLab information[0m
Version: 5.4.0
Revision: 94a814d
Directory: /opt/bitnami/apps/gitlab/htdocs
DB Adapter: mysql2
URL: http://gitlab.funshion.com/gitlab
HTTP Clone URL: http://gitlab.funshion.com/gitlab/some-project.git
SSH Clone URL: git#gitlab.funshion.com:some-project.git
Using LDAP: [32myes[0m
Using Omniauth: no
[33mGitLab Shell[0m
Version: 1.7.0
Repositories: /opt/bitnami/apps/gitlab/repositories/
Hooks: /opt/bitnami/apps/gitlab/gitlab-shell/hooks/
Git: /opt/bitnami/git/bin/git
UPDATE 4: Actually user password can be set if to open the user page again.
We suggest to configure the application to use an external SMTP mail server for sending the emails. If you are using a Cloud image there are limitations for sending emails from the instance itself https://aws-portal.amazon.com/gp/aws/html-forms-controller/contactus/ec2-email-limit-rdns-request In any case, you can send emails from the application if you install "sendmail" in the machine.
There is a quick guide to know how to configure GitLab with GMail or any other email provider easily at http://wiki.bitnami.com/Applications/BitNami_GitLab#How_to_configure_the_email_settings_of_GitLab.3f I hope it helps.
I have an Ubuntu workstation and i'm trying to bootstrap a windows node. The windows node has ssh open on port 2222. I've been following http://docs.opscode.com/plugin_knife_windows.html.
ateetor#ateetor-virtual-machine:~/chef/chef-repo$ sudo gem install knife-windows --http-proxy=[REMOVED]
Successfully installed knife-windows-0.5.12
1 gem installed
Installing ri documentation for knife-windows-0.5.12...
Installing RDoc documentation for knife-windows-0.5.12...
ateetor#ateetor-virtual-machine:~/chef/chef-repo$ sudo knife bootstrap windows ssh 10.29.3.114 -x chef -P SSHuser1! -N test -p 2222 -VV
DEBUG: Looking for bootstrap template in /opt/chef/embedded/lib/ruby/gems/1.9.1/gems/chef-11.4.4/lib/chef/knife/bootstrap
DEBUG: Found bootstrap template in /opt/chef/embedded/lib/ruby/gems/1.9.1/gems/chef-11.4.4/lib/chef/knife/bootstrap
Bootstrapping Chef on windows
DEBUG: Adding windows
DEBUG: establishing connection to windows:2222
ERROR: Network Error: getaddrinfo: Name or service not known
Check your knife configuration and network settings
To me what that looks like is it's trying to use the word windows as part of the IP; however my syntax matches the guide so i don't know why. Does anyone have any ideas on how to fix this?
If you look at the output it's running the generic bootstrap template.
Looking for bootstrap template in /opt/chef/embedded/lib/ruby/gems/1.9.1/gems/chef-11.4.4/lib/chef/knife/bootstrap
Most likely there is an installation or ruby environment issue resolving the knife-windows gem.
When correctly configured you should see:
Looking for bootstrap template in /opt/chef/embedded/lib/ruby/gems/1.9.1/gems/knife-windows-0.5.12/lib/chef/knife/bootstrap
The only fix I have found is to use knife from a windows workstation instead of a linux one.
knife bootstrap windows winrm 111.22.33.44.compute-1.amazonaws.com -x Administrator -P "asdklfj329" -N "windows-2008-551"
Enjoy :)
I have faced the similar issue.One of the reasons for this might be you knife-windows gem package is not installed in expected location.
knife-windows resolves target hostname ,if its not properly installed winrm knife cant resolve targetname.So to overcome this install knife-windows as below
To install the knife windows plugin using RubyGems, run the following command:
$ /opt/chef/embedded/bin/gem install knife-windows
if properly installed you should be able to find knife-windows at
/opt/chef/embedded/lib/ruby/gems/1.9.1/gems/
I'm using
mac OS 1.8.3
RVM 1.19.6
Ruby ruby 1.9.3p327
Apache 2.4
Phusion Passenger 3.0.19
After an error free install of Apache I launched the server and it worked.
I wrote a 'start_apache.sh' script:
#!/bin/bash
sudo /usr/local/apache2/bin/apachectl -k start
... which worked.
I then installed phusion passenger without error.
When I ran my start_apache.sh script, I got this error
httpd: Syntax error on line 504 of /usr/local/apache2/conf/httpd.conf:
Cannot load
/Users/perry_mac/.rvm/gems/ruby-1.9.3-p327/gems/passenger-3.0.19/ext/apache2/mod_passenger.so
into server:
dlopen(/Users/perry_mac/.rvm/gems/ruby-1.9.3-p327/gems/passenger-3.0.19/ext/apache2/mod_passenger.so,
10): Symbol not found: _unixd_config\n Referenced from:
/Users/perry_mac/.rvm/gems/ruby-1.9.3-p327/gems/passenger-3.0.19/ext/apache2/mod_passenger.so\n
Expected in: flat namespace\n in
/Users/perry_mac/.rvm/gems/ruby-1.9.3-p327/gems/passenger-3.0.19/ext/apache2/mod_passenger.so
After following ++ a lot ++ of 'Can't loadModule' Q&A's, I tried
cd /usr/local/apache2/bin
sudo apachectl -k start
... and it worked.
Using the script still does not.
Can someone explain why?
Many thanks!
Maybe it has to do with the working directory. Try this:
#!/bin/bash
cd /usr/local/apache2/bin/ && sudo ./apachectl -k start
Maybe this is some issue with user profile. Could you check environmental paramentrs values?
Thank you rzymek.
Your insight lead me to try this:
perrys-MacBook-Pro:bin perry_mac$ ls
ab apxs dbmmanage envvars-std htcacheclean htdigest httpd logresolve
apachectl checkgid envvars fcgistarter htdbm htpasswd httxt2dbm rotatelogs
perrys-MacBook-Pro:bin perry_mac$ pwd
/usr/local/apache2/bin
perrys-MacBook-Pro:bin perry_mac$ which apachectl
/usr/sbin/apachectl
perrys-MacBook-Pro:bin perry_mac$
Here's what happened: I downloaded, built, and installed apache 2.4. Did not know mac OSX 10.8.3 still had a working apache installation. I had read some web posts about how Apple had "removed web sharing" from this OS version. Turns out that means they removed a GUI element, but left the server in place. As you can see, I now have two versions of apachectl and httpd. I am untangling the rest of the mess now. As a follow-up, if anyone has advice on how to best proceed, please comment below. Otherwise I am going to start by modifying $PATH and see how that goes.
ADDENDUM:
Looks like this lead to a component of my confusion:
http://www.modrails.com/documentation/Users%20guide%20Apache.html#_phusion_passenger_is_using_the_wrong_apache_during_installation
... but the link leads to no remedy (as of 5/5/2013). There must be an option to set during the phusion passenger installation to ensure it points to the desired apache installation, but I can't locate it.
In the end, I removed the ver 2.4 of apache that I built and reverted to the ver 2.2 that is included with the OS. So far, it's all working.
I have spent a couple of days surfing the internet to find an answer to my question. I have tried everything I could but have been unsuccessful thus far in solving this problem. Netbeans keeps giving Waiting for Connection (netbeans-xdebug).
I am using the following software:
XAMPP Version 1.8.1.
Windows 7
Netbeans IDE 7.2.1
Xdebug 2.2.1
I installed the latest version according via the wizard for the xdebug.org site (http://xdebug.org/wizard.php). Xdebug is working according to phpinfo().The HMTL output in my browser (Firefox 17.0.1) shows xdebug code. However this is not communicated back to netbeans. Using Netstat via command prompt (Run -> cmd.exe) shows that there is a TCP connection on port 9000. However , nothing is reported back in Netbeans.
I have tried several different alternatives, for example:
Installing a similar IDE, Eclipse PDT. Eclipse shows that Xdebug is
working. However, because Eclipse is lacking functions I need I
wanted to use Netbeans.
Installing Netbeans on Ubuntu 12.04 LTS.
Still the same problem. Netbeans not working (waiting for
connection). Also output in browsers shows that Xdebug is working.
Whenever I install on a new Linux machine: "php xdebug" and netbeans I run these simple steps and I've always managed to corect integration of xdebug on netbeans.
So with the data you provide, I can only help you solve, the half of your problem. Allowing you to connect on Linux machines:
Installation with pecl:
# apt-get install php5-dev php-pear
# pecl install xdebug
Or direct installation:
# apt-get install php5-xdebug
find the library:
# find / -name 'xdebug.so'
/usr/lib/php5/20090626+lfs/xdebug.so
Edit phi.ini file:
...
zend_extension=/usr/lib/php5/20090626+lfs/xdebug.so
xdebug.remote_enable=1
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_host=127.0.0.1
xdebug.remote_port=9000
...
Restart web-server in your case: Apache
$ /etc/init.d/apache2 restart
According to what you have posted:
Installing Netbeans on Ubuntu 12.04 LTS.
I have used the installation method "apt-get" for distributions ".deb".
If you are using a distribution ".rpm" can do the same with "yum"
Many of these commands are surely simplified within the xampp.
But if you running this commands from console will not affect the final result.
Another important note about Windows's machines and Linux's machines,
You should check that your firewall rules are allowing to establish a connection from netbeans to xdebug.
I know this is old but for people using Ubuntu this might help.
OS Version = Ubuntu 14.04.3 LTS; Codename: trusty
PHP Version = PHP 5.5.9-1ubuntu4.11 (cli) (built: Jul 2 2015 15:17:32)
Apache Version = Server version: Apache/2.4.7 (Ubuntu)
Procedure
Install xdebug for php5
sudo apt-get install php5-xdebug
Open php.ini and add the following lines below (usually sudo vim /etc/php5/apache2/php.ini)
xdebug.remote_enable=On;
xdebug.remote_host=127.0.0.1
xdebug.remote_port=9000;
xdebug.remote_handler="dbgp";
Restart apache and your good to go
sudo service apache2 restart
Note 1: I have not tried doing this without firefox add-on for xdebug, so if after doing the procedure above and still to no avail, download the add-on for firefox Easy Xdebug
Note 2: I did not touch the PHP Configuration of Netbeans
Note 3: I did not touch xdebug.ini