I am using Boost asio in Visual C++. I am trying to connect to a static IP which listens TCP on port 1222. unfortunately i can only connect with Lan and cannot connect from another Lan to the TCP listening PC(203.143..).
It connects perfectly with the EC2 server. Is it something to do with firewall. but when i run the app it ask for the user to allow firewall for the specific port. I can post my code but i guess it's not something to with the code.
Usually a firewall on the server side (the PC you are trying to connect to) have to be configured to allow incoming connections.
Firewall on your side should be OK, it usually allows any type of outgoing connections.
I don't know what you meant by "the app ask for the user to allow firewall for the specific port" (clarify).
Related
I have a client which is intended to connect to a server. For the client, the remote TCP port number is fixed(i.e. 102). I can NOT change it(while I can change the remote IP address). However, the TCP Port number the server is listening on is fixed as well(i.e. 1024) and I can NOT change it too. These two port numbers are different. I want to make the client connect to the server smoothly.
At the first, I had a idea that I setup a proxy listening on localhost:102 and the client connect to 127.0.0.1:102. Then this proxy redirect these TCP traffic to the real address RemoteServerIP:1024. But I found on my windows, there was already a process which is listening on 0.0.0.0:102 and I can NOT change its listening port. So this idea can NOT work.
Thank you very much.
if you cannot do it on the same windows machine running client, why not try to do it on another (linux maybe) machine?
I'm using BOOST-ASIO for a simple echo client-server (there is a separate link for the client and server). When I try to run the server I use this async_tcp_echo_server 4000. For the client I use blocking_tcp_echo_client #.#.#.# 4000 (with #.#.#.# as the ip address). I'm on XP-SP3 with my computer connected to my wireless dsl modem using a usb card. After a few seconds on the client side I get this error:
Exception: connect: A connection attempt failed because the connected party did
not properly respond after a period of time, or established connection failed be
cause connected host has failed to respond
Any ideas what it could be? I turned off my firewall including the windows firewall and still I get no response. Could my port be in the incorrect range? Do I need to include a computer name to specify the machine on the network( there are other machines on the network sometimes active)? I did try running this on another computer directly connected to the dsl modem and same issue. I did ping my address and that did work for 4/4 packets.
It could be a variety of issues. Thus, it can be worthwhile to use lower level networking tools, such as netcat to serve a port on the server, and try connecting with netcat from the client side. This can help simplify the problem by removing any potential problems introduced by an application's network programming code. If the problem is identified as being a network issue, then there are a few things to check:
Verify firewall exceptions on the server.
Verify firewall exceptions in the server's network gateway.
If the server and client are on different networks, with the client trying to connect to the server's external IP, then verify that the server's gateway knows what traffic to route to the server. This may require setting up rules, such as port forwarding, in the routing device.
If the server and client are on the same network, but the client is trying to connect to the server through the network's external IP, then verify that the gateway supports looping back internal traffic destined to the external IP.
Use a network analyzer tool, such as Wireshark, to verify that the time to live field in the packets is high enough that it will not be discarded.
you could try
$ telnet server-ip 4000
from your client and see if it is possible to establish the tcp connection.
I am trying to find somw Windows based tools that can help me validate TCP and UDP connection on remote machines.
My Problem (just one use case):
At work, I manage many clustered servers that I run load tests against. In order to get a rich test, I use Jmeter-Plugins which provides a Server agent that opens a TCP socket on port 4444 on a target remote machine: http://code.google.com/p/jmeter-plugins/wiki/PerfMonAgent
There are many times when I setup a new load test farm, that either the network, or the server configuration, or the ServerAgent itself can have issues and thus not allowing a Load test client to access that TCP connection.
The issue I have is that I dont know what part of the system is broken.
What I think I need:
I would like to know how I can open a TCP (not HTTP with cUrl), connection to a remote server to validate that the network allows the connection, as well as the Server firewall allows the given TCP connection to be accessed remotely.
What I have looked:
These are some of the tools I have looked at so far:
Nmap http://nmap.org
Ncat http://sourceforge.net/projects/nmap-ncat/
TCP/IP Builder http://www.drk.com.ar
Zenmap 6.01 and nmap might do the job I want, but some machines where not accessible to Zenmap when I know 100% that the server was accessible via HTTP, so that was strange.
I have looked at many tools and either they:
Dont allow remote connections
Dont seem to want to connect to a TCP socket
Or I dont understand the tools to accomplish the validation I stated above.
I would greatly appreciate all comment and suggestions to help with this re-occurring problem I face.
Mick,
Firebind.com can do what you'd like to do. Firebind is an Internet based server that can listen on any of the 65535 UDP or TCP ports. It uses a java based client to send traffic to and from the server from your machine.
Carl
www.firebind.com
I am trying to run a socket server on an Amazon Web Services EC2 instance. The socket is able to run just fine on it's own, and telnetting locally on the instance can connect, but trying to telnet to the socket from the outside is failing. I have gone into the security groups to ensure the ports I am using are open for both TCP and UDP (though the socket server has been configured for TCP). Is there something else I am missing?
The server might be listening on the loopback interface or ipv6 by default. You can check that by running netstat --listen -p which will show you which program listens on which address/port. How to make the program listen on the external ipv4 interface depends on the program/programming language.
I have a local server written in C++ listening to inbound TCP connects using plain socket ::accept() and UDP recvfrom(). I have two problems with this that I wish to solve:
Can I programatically make Windows let me open the accept socket without it automatically being blocked by the Windows (software) firewall?
Are there any ports I can use that will allow my packets to pass through both Windows firewall and external firewall? Port 80 is often taken by things like Skype, but are there others? Will most external firewalls typically by default allow incoming UDP and TCP connects on port 80?
Thanks!
In general, network routers need Port Forwardng enabled for the listening port, and firewalls need the listening port opened. If you are using a uPNP-enabled firewall/router, then you can dynamically set up those settings programmmably via the uPNP API. But more times than not, uPNP is either disabled or unavailable, requiring manual settings by the firewll/router admin.