Related
I'm running a shell test program that I can view a progress bar but when I run it I keep getting a unary error . Is kill -0 a way to kill a subprocess in shell ?
Or is there another method to test if my process has died?
heres my code to run a progress bar until my command ends:
#!/bin/sh
# test my progress bar
spin[0]="-"
spin[1]="\\"
spin[2]="|"
spin[3]="/"
sleep 10 2>/dev/null & # run as background process
pid=$! # grab process id
echo -n "[sleeping] ${spin[0]}"
while [ kill -0 $pid ] # wait for process to end
do
for i in "${spin[#]}"
do
echo -ne "\b$i"
sleep 0.1
done
done
enter code here
1. Is kill -0 a way to kill a subprocess in shell ?
On Linux OS, kill -0 is just a way to try to kill a process and see what happens, '0' is not a POSIX signal, it does nothing at all.
If the process is running, kill will return 0, if not, it will return 1.
ps $pid >/dev/null 2>&1 could do the same job.
To kill a process, one generally use the SIGQUIT/3 (quit program) or SIGKILL/9 (terminate program) ; the process could trap the signal and make a clean exit, or it could ignore the signal so the OS has to terminate it 'quick and dirty'.
2. test and '['
The square bracket '[' is an utility ( /bin/[ ), and expect something you didn't provide correctly.
The syntax of while is while list; do list; done where list will return an exit code, so you don't have to use something else.
3. how do I watch for a process to have died in shell script?
Like you did, the code below will do the job:
#!/bin/bash
spin[0]="-"
spin[1]="\\"
spin[2]="|"
spin[3]="/"
sleep 10 2>/dev/null & # run as background process
pid=$! # grab process id
echo -n "[sleeping] ${spin[0]}"
#while ps -p $pid >/dev/null 2>&1 # using ps
while kill -0 $pid >/dev/null 2>&1 # using kill
do
for i in "${spin[#]}"
do
echo -ne "\b$i"
sleep 0.5
done
done
CAVEATS
I use /bin/bash as interpreter, as some of the Bourne Shell (sh) could not support the use of an array (ie spin[n]).
It's probably cleaner to run the spinner in the background and kill it when the process (running in the foreground) terminates. Or, you could open another file descriptor and write something into it after the background process terminates, and have the main process block on a read. eg:
#!/bin/bash
# test my progress bar
spin[0]='-'
spin[1]='\'
spin[2]='|'
spin[3]='/'
{ { { sleep 10 2>/dev/null; echo >&5; } & # run as background process
} 5>&1 1>&3 | { # wait for process to end
while ! read -t 1; do
printf "\r[sleeping] ${spin[ $(( i = ++i % 4 )) ]}"
done
}
} 3>&1
I'm writing a wrapper script to use in inittab.
This script starts a daemon and waits for it to terminate.
Here's what I have currently:
#!/bin/bash
/usr/local/bin/mydaemon --lots_of_params_here
while kill -0 `echo $!` 2> /dev/null; do sleep 1; done;
The problem is with the second line; it just returns immediately. If I instead do:
while kill -0 `pgrep mydaemon` 2> /dev/null; do sleep 1; done;
It all works fine, but this isn't a good solution for me as I have other scripts with the prefix mydaemon.
What am I doing wrong?
EDIT:
The problem seems to be related to the daemon fork(). So, I always get the parent pid in $!. I'm looking for ways to solve this problem. Maybe I should use pid files and have mydaemon write its pid there.
You can do the following way to get through your issue.
#!/bin/bash
/usr/local/bin/mydaemon --lots_of_params_here &
wait $!
wait command will wait till the process completes and comes out.
If you are looking for to wait after some other commands then you can store the PID in any other variable and use that.
#!/bin/bash
/usr/local/bin/mydaemon --lots_of_params_here &
mypid=$!
### Some other commands
wait $mypid
Is there any builtin feature in Bash to wait for a process to finish?
The wait command only allows one to wait for child processes to finish.
I would like to know if there is any way to wait for any process to finish before proceeding in any script.
A mechanical way to do this is as follows but I would like to know if there is any builtin feature in Bash.
while ps -p `cat $PID_FILE` > /dev/null; do sleep 1; done
To wait for any process to finish
Linux (doesn't work on Alpine, where ash doesn't support tail --pid):
tail --pid=$pid -f /dev/null
Darwin (requires that $pid has open files):
lsof -p $pid +r 1 &>/dev/null
With timeout (seconds)
Linux:
timeout $timeout tail --pid=$pid -f /dev/null
Darwin (requires that $pid has open files):
lsof -p $pid +r 1m%s -t | grep -qm1 $(date -v+${timeout}S +%s 2>/dev/null || echo INF)
There's no builtin. Use kill -0 in a loop for a workable solution:
anywait(){
for pid in "$#"; do
while kill -0 "$pid"; do
sleep 0.5
done
done
}
Or as a simpler oneliner for easy one time usage:
while kill -0 PIDS 2> /dev/null; do sleep 1; done;
As noted by several commentators, if you want to wait for processes that you do not have the privilege to send signals to, you have find some other way to detect if the process is running to replace the kill -0 $pid call. On Linux, test -d "/proc/$pid" works, on other systems you might have to use pgrep (if available) or something like ps | grep "^$pid ".
I found "kill -0" does not work if the process is owned by root (or other), so I used pgrep and came up with:
while pgrep -u root process_name > /dev/null; do sleep 1; done
This would have the disadvantage of probably matching zombie processes.
This bash script loop ends if the process does not exist, or it's a zombie.
PID=<pid to watch>
while s=`ps -p $PID -o s=` && [[ "$s" && "$s" != 'Z' ]]; do
sleep 1
done
EDIT: The above script was given below by Rockallite. Thanks!
My orignal answer below works for Linux, relying on procfs i.e. /proc/. I don't know its portability:
while [[ ( -d /proc/$PID ) && ( -z `grep zombie /proc/$PID/status` ) ]]; do
sleep 1
done
It's not limited to shell, but OS's themselves do not have system calls to watch non-child process termination.
FreeBSD and Solaris have this handy pwait(1) utility, which does exactly, what you want.
I believe, other modern OSes also have the necessary system calls too (MacOS, for example, implements BSD's kqueue), but not all make it available from command-line.
From the bash manpage
wait [n ...]
Wait for each specified process and return its termination status
Each n may be a process ID or a job specification; if a
job spec is given, all processes in that job's pipeline are
waited for. If n is not given, all currently active child processes
are waited for, and the return status is zero. If n
specifies a non-existent process or job, the return status is
127. Otherwise, the return status is the exit status of the
last process or job waited for.
Okay, so it seems the answer is -- no, there is no built in tool.
After setting /proc/sys/kernel/yama/ptrace_scope to 0, it is possible to use the strace program. Further switches can be used to make it silent, so that it really waits passively:
strace -qqe '' -p <PID>
All these solutions are tested in Ubuntu 14.04:
Solution 1 (by using ps command):
Just to add up to Pierz answer, I would suggest:
while ps axg | grep -vw grep | grep -w process_name > /dev/null; do sleep 1; done
In this case, grep -vw grep ensures that grep matches only process_name and not grep itself. It has the advantage of supporting the cases where the process_name is not at the end of a line at ps axg.
Solution 2 (by using top command and process name):
while [[ $(awk '$12=="process_name" {print $0}' <(top -n 1 -b)) ]]; do sleep 1; done
Replace process_name with the process name that appears in top -n 1 -b. Please keep the quotation marks.
To see the list of processes that you wait for them to be finished, you can run:
while : ; do p=$(awk '$12=="process_name" {print $0}' <(top -n 1 -b)); [[ $b ]] || break; echo $p; sleep 1; done
Solution 3 (by using top command and process ID):
while [[ $(awk '$1=="process_id" {print $0}' <(top -n 1 -b)) ]]; do sleep 1; done
Replace process_id with the process ID of your program.
Blocking solution
Use the wait in a loop, for waiting for terminate all processes:
function anywait()
{
for pid in "$#"
do
wait $pid
echo "Process $pid terminated"
done
echo 'All processes terminated'
}
This function will exits immediately, when all processes was terminated. This is the most efficient solution.
Non-blocking solution
Use the kill -0 in a loop, for waiting for terminate all processes + do anything between checks:
function anywait_w_status()
{
for pid in "$#"
do
while kill -0 "$pid"
do
echo "Process $pid still running..."
sleep 1
done
done
echo 'All processes terminated'
}
The reaction time decreased to sleep time, because have to prevent high CPU usage.
A realistic usage:
Waiting for terminate all processes + inform user about all running PIDs.
function anywait_w_status2()
{
while true
do
alive_pids=()
for pid in "$#"
do
kill -0 "$pid" 2>/dev/null \
&& alive_pids+="$pid "
done
if [ ${#alive_pids[#]} -eq 0 ]
then
break
fi
echo "Process(es) still running... ${alive_pids[#]}"
sleep 1
done
echo 'All processes terminated'
}
Notes
These functions getting PIDs via arguments by $# as BASH array.
Had the same issue, I solved the issue killing the process and then waiting for each process to finish using the PROC filesystem:
while [ -e /proc/${pid} ]; do sleep 0.1; done
There is no builtin feature to wait for any process to finish.
You could send kill -0 to any PID found, so you don't get puzzled by zombies and stuff that will still be visible in ps (while still retrieving the PID list using ps).
If you need to both kill a process and wait for it finish, this can be achieved with killall(1) (based on process names), and start-stop-daemon(8) (based on a pidfile).
To kill all processes matching someproc and wait for them to die:
killall someproc --wait # wait forever until matching processes die
timeout 10s killall someproc --wait # timeout after 10 seconds
(Unfortunately, there's no direct equivalent of --wait with kill for a specific pid).
To kill a process based on a pidfile /var/run/someproc.pid using signal SIGINT, while waiting for it to finish, with SIGKILL being sent after 20 seconds of timeout, use:
start-stop-daemon --stop --signal INT --retry 20 --pidfile /var/run/someproc.pid
Use inotifywait to monitor some file that gets closed, when your process terminates. Example (on Linux):
yourproc >logfile.log & disown
inotifywait -q -e close logfile.log
-e specifies the event to wait for, -q means minimal output only on termination. In this case it will be:
logfile.log CLOSE_WRITE,CLOSE
A single wait command can be used to wait for multiple processes:
yourproc1 >logfile1.log & disown
yourproc2 >logfile2.log & disown
yourproc3 >logfile3.log & disown
inotifywait -q -e close logfile1.log logfile2.log logfile3.log
The output string of inotifywait will tell you, which process terminated. This only works with 'real' files, not with something in /proc/
Rauno Palosaari's solution for Timeout in Seconds Darwin, is an excellent workaround for a UNIX-like OS that does not have GNU tail (it is not specific to Darwin). But, depending on the age of the UNIX-like operating system, the command-line offered is more complex than necessary, and can fail:
lsof -p $pid +r 1m%s -t | grep -qm1 $(date -v+${timeout}S +%s 2>/dev/null || echo INF)
On at least one old UNIX, the lsof argument +r 1m%s fails (even for a superuser):
lsof: can't read kernel name list.
The m%s is an output format specification. A simpler post-processor does not require it. For example, the following command waits on PID 5959 for up to five seconds:
lsof -p 5959 +r 1 | awk '/^=/ { if (T++ >= 5) { exit 1 } }'
In this example, if PID 5959 exits of its own accord before the five seconds elapses, ${?} is 0. If not ${?} returns 1 after five seconds.
It may be worth expressly noting that in +r 1, the 1 is the poll interval (in seconds), so it may be changed to suit the situation.
On a system like OSX you might not have pgrep so you can try this appraoch, when looking for processes by name:
while ps axg | grep process_name$ > /dev/null; do sleep 1; done
The $ symbol at the end of the process name ensures that grep matches only process_name to the end of line in the ps output and not itself.
I found the following lines at the top of one of our scripts. I understand that it verifies if the PID file is already running it will kill the script to run twice, but I don't really understand what each statement does?
For example, if kill -0 &>1 > /dev/null $pid; then. Can someone help me understanding the logic behind this?
pidfile=/tmp/backup_meb.pid
if [ -e $pidfile ]; then
pid=`cat $pidfile`
if kill -0 &>1 > /dev/null $pid; then
echo "Already running"
exit 1
else
rm $pidfile
fi
fi
echo $$ > $pidfile
kill man page:
If sig is 0, then no signal is sent, but error checking is still performed.
if operates on the return code of the list it executes. In this case the return status of kill.
if pidfile exists then
set pid to the contents of pidfile
if pid is a valid process ID
print "Already running" and exit
otherwise
delete pidfile
create a new pidfile that contains the ID of the current process
The kill -0 command sends a null signal to the process and the exit code will tell you if the process exists/can be accessed. The &>1 redirects stdout to /dev/null. $$ is an internal variable in bash that contains the process ID of the script (or shell) itself.
Is there any builtin feature in Bash to wait for a process to finish?
The wait command only allows one to wait for child processes to finish.
I would like to know if there is any way to wait for any process to finish before proceeding in any script.
A mechanical way to do this is as follows but I would like to know if there is any builtin feature in Bash.
while ps -p `cat $PID_FILE` > /dev/null; do sleep 1; done
To wait for any process to finish
Linux (doesn't work on Alpine, where ash doesn't support tail --pid):
tail --pid=$pid -f /dev/null
Darwin (requires that $pid has open files):
lsof -p $pid +r 1 &>/dev/null
With timeout (seconds)
Linux:
timeout $timeout tail --pid=$pid -f /dev/null
Darwin (requires that $pid has open files):
lsof -p $pid +r 1m%s -t | grep -qm1 $(date -v+${timeout}S +%s 2>/dev/null || echo INF)
There's no builtin. Use kill -0 in a loop for a workable solution:
anywait(){
for pid in "$#"; do
while kill -0 "$pid"; do
sleep 0.5
done
done
}
Or as a simpler oneliner for easy one time usage:
while kill -0 PIDS 2> /dev/null; do sleep 1; done;
As noted by several commentators, if you want to wait for processes that you do not have the privilege to send signals to, you have find some other way to detect if the process is running to replace the kill -0 $pid call. On Linux, test -d "/proc/$pid" works, on other systems you might have to use pgrep (if available) or something like ps | grep "^$pid ".
I found "kill -0" does not work if the process is owned by root (or other), so I used pgrep and came up with:
while pgrep -u root process_name > /dev/null; do sleep 1; done
This would have the disadvantage of probably matching zombie processes.
This bash script loop ends if the process does not exist, or it's a zombie.
PID=<pid to watch>
while s=`ps -p $PID -o s=` && [[ "$s" && "$s" != 'Z' ]]; do
sleep 1
done
EDIT: The above script was given below by Rockallite. Thanks!
My orignal answer below works for Linux, relying on procfs i.e. /proc/. I don't know its portability:
while [[ ( -d /proc/$PID ) && ( -z `grep zombie /proc/$PID/status` ) ]]; do
sleep 1
done
It's not limited to shell, but OS's themselves do not have system calls to watch non-child process termination.
FreeBSD and Solaris have this handy pwait(1) utility, which does exactly, what you want.
I believe, other modern OSes also have the necessary system calls too (MacOS, for example, implements BSD's kqueue), but not all make it available from command-line.
From the bash manpage
wait [n ...]
Wait for each specified process and return its termination status
Each n may be a process ID or a job specification; if a
job spec is given, all processes in that job's pipeline are
waited for. If n is not given, all currently active child processes
are waited for, and the return status is zero. If n
specifies a non-existent process or job, the return status is
127. Otherwise, the return status is the exit status of the
last process or job waited for.
Okay, so it seems the answer is -- no, there is no built in tool.
After setting /proc/sys/kernel/yama/ptrace_scope to 0, it is possible to use the strace program. Further switches can be used to make it silent, so that it really waits passively:
strace -qqe '' -p <PID>
All these solutions are tested in Ubuntu 14.04:
Solution 1 (by using ps command):
Just to add up to Pierz answer, I would suggest:
while ps axg | grep -vw grep | grep -w process_name > /dev/null; do sleep 1; done
In this case, grep -vw grep ensures that grep matches only process_name and not grep itself. It has the advantage of supporting the cases where the process_name is not at the end of a line at ps axg.
Solution 2 (by using top command and process name):
while [[ $(awk '$12=="process_name" {print $0}' <(top -n 1 -b)) ]]; do sleep 1; done
Replace process_name with the process name that appears in top -n 1 -b. Please keep the quotation marks.
To see the list of processes that you wait for them to be finished, you can run:
while : ; do p=$(awk '$12=="process_name" {print $0}' <(top -n 1 -b)); [[ $b ]] || break; echo $p; sleep 1; done
Solution 3 (by using top command and process ID):
while [[ $(awk '$1=="process_id" {print $0}' <(top -n 1 -b)) ]]; do sleep 1; done
Replace process_id with the process ID of your program.
Blocking solution
Use the wait in a loop, for waiting for terminate all processes:
function anywait()
{
for pid in "$#"
do
wait $pid
echo "Process $pid terminated"
done
echo 'All processes terminated'
}
This function will exits immediately, when all processes was terminated. This is the most efficient solution.
Non-blocking solution
Use the kill -0 in a loop, for waiting for terminate all processes + do anything between checks:
function anywait_w_status()
{
for pid in "$#"
do
while kill -0 "$pid"
do
echo "Process $pid still running..."
sleep 1
done
done
echo 'All processes terminated'
}
The reaction time decreased to sleep time, because have to prevent high CPU usage.
A realistic usage:
Waiting for terminate all processes + inform user about all running PIDs.
function anywait_w_status2()
{
while true
do
alive_pids=()
for pid in "$#"
do
kill -0 "$pid" 2>/dev/null \
&& alive_pids+="$pid "
done
if [ ${#alive_pids[#]} -eq 0 ]
then
break
fi
echo "Process(es) still running... ${alive_pids[#]}"
sleep 1
done
echo 'All processes terminated'
}
Notes
These functions getting PIDs via arguments by $# as BASH array.
Had the same issue, I solved the issue killing the process and then waiting for each process to finish using the PROC filesystem:
while [ -e /proc/${pid} ]; do sleep 0.1; done
There is no builtin feature to wait for any process to finish.
You could send kill -0 to any PID found, so you don't get puzzled by zombies and stuff that will still be visible in ps (while still retrieving the PID list using ps).
If you need to both kill a process and wait for it finish, this can be achieved with killall(1) (based on process names), and start-stop-daemon(8) (based on a pidfile).
To kill all processes matching someproc and wait for them to die:
killall someproc --wait # wait forever until matching processes die
timeout 10s killall someproc --wait # timeout after 10 seconds
(Unfortunately, there's no direct equivalent of --wait with kill for a specific pid).
To kill a process based on a pidfile /var/run/someproc.pid using signal SIGINT, while waiting for it to finish, with SIGKILL being sent after 20 seconds of timeout, use:
start-stop-daemon --stop --signal INT --retry 20 --pidfile /var/run/someproc.pid
Use inotifywait to monitor some file that gets closed, when your process terminates. Example (on Linux):
yourproc >logfile.log & disown
inotifywait -q -e close logfile.log
-e specifies the event to wait for, -q means minimal output only on termination. In this case it will be:
logfile.log CLOSE_WRITE,CLOSE
A single wait command can be used to wait for multiple processes:
yourproc1 >logfile1.log & disown
yourproc2 >logfile2.log & disown
yourproc3 >logfile3.log & disown
inotifywait -q -e close logfile1.log logfile2.log logfile3.log
The output string of inotifywait will tell you, which process terminated. This only works with 'real' files, not with something in /proc/
Rauno Palosaari's solution for Timeout in Seconds Darwin, is an excellent workaround for a UNIX-like OS that does not have GNU tail (it is not specific to Darwin). But, depending on the age of the UNIX-like operating system, the command-line offered is more complex than necessary, and can fail:
lsof -p $pid +r 1m%s -t | grep -qm1 $(date -v+${timeout}S +%s 2>/dev/null || echo INF)
On at least one old UNIX, the lsof argument +r 1m%s fails (even for a superuser):
lsof: can't read kernel name list.
The m%s is an output format specification. A simpler post-processor does not require it. For example, the following command waits on PID 5959 for up to five seconds:
lsof -p 5959 +r 1 | awk '/^=/ { if (T++ >= 5) { exit 1 } }'
In this example, if PID 5959 exits of its own accord before the five seconds elapses, ${?} is 0. If not ${?} returns 1 after five seconds.
It may be worth expressly noting that in +r 1, the 1 is the poll interval (in seconds), so it may be changed to suit the situation.
On a system like OSX you might not have pgrep so you can try this appraoch, when looking for processes by name:
while ps axg | grep process_name$ > /dev/null; do sleep 1; done
The $ symbol at the end of the process name ensures that grep matches only process_name to the end of line in the ps output and not itself.