Recently my boss told me that he wants a new installer for his program he created in Visual Basic 6 back in 2001, moreover he said "he want's it to be like one of those Adobe installers".
so to make a long story short, for the past few days I've been using everything i could find but none of the solutions I've found(mostly software) yielded any results
To clarify, he specifically told me to do it without the source code of the program
all i have to work with is the programs actual installer (which is not even .msi) the .CAB file of the program and a file folder where he keeps some support files for the actual installation method.
Your old setup is PDW based and should have a Setup.lst file which lists all the files, where and how to install them.
This can easily converted to an Inno Setup script that provides a much nice and more up to date "installation experiance" than the PDW can natively.
Related
How would I get a list of EVERY program into a text file for windows 95-windows 10. The uninstall programs in control panel doesn't have the version and publisher for the older operating systems, and wmic does not display every program. Even the uninstall registry, which I thought would be my savior, does not list every program. I can see discrepancies between that and the uninstall programs tab. Powershell and the like are off the table since it is relatively new.
Some combination of the following:
Enumerate registry for HKEY_CURRENT_USER\Software\Microsoft\CurrentVersion\Uninstall and HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\Uninstall. And probably HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Uninstall on 64-bit os (might be duplicated). These are the list of installed programs that appear in the Control Panel's "Program and Features" section. Notice that some of the entries are straight-forward and have most of the data you want. Others are a GUID - this corresponds to an MSI installation.
For all the entries obtained in #1 that reference a GUID, use the MSI API to find the installation information you seek. Start with MsiEnumProducts. From there you can get at version info of installed applications.
Brute force search for EXEs installed in C:\Program Files and C:\Program Files (x86). For each EXE found, you can use this method to get the version information.
You want a list of applications installed from the Windows Store? Ask me for a code sample if that's important too.
The registry uninstall registration requirements in the 90's was just the display name and the command to start the uninstallation. Windows 2000 added support for more values and exposed them in the new UI but they were still optional. In recent years a couple of them became a requirement to pass the Windows Logo tests but they are still optional for non-certified applications so the uninstall key is not guaranteed to contain version/publisher information for every entry. Portable applications are not listed in the registry so if you need a inventory of everything then you need to inspect all exe files and ignore the registry.
Supporting everything back to Win95 RTM is going to be tough since you have nothing except batch files as a scripting option. VBScript is a optional component that normally gets installed with IE 4 and I don't even remember if it is possible to get Powershell on these systems.
I don't think it is possible to extract the version information with a simple batch file, you probably need the help of a 3rd-party tool. The issue with 3rd-party tools is that a lot of them depend on the Microsoft CRT run-time .DLLs and Windows 95 RTM does not have them out of the box, not even msvcrt.dll.
If you can raise your requirement for Win95 to have Windows Scripting Host installed (redistributable or part of IE4) then you could write a VB/Jscript file that uses the FileSystemObject to both walk the entire directory tree on every drive and to get version information from .exe files.
If that is unacceptable then you need to try to find a tool that can extract version information. There is a Microsoft tool named filever.exe listed here but I don't know if it works on Win95 and a NirSoft tool here but I'm not sure if it supports stdout redirection from the commandline (but it is open source so you could fix that if needed). Even if you find a suitable tool you would still need to walk the directory tree looking for .exe files and that is not going to be fun when you are limited to command.com and its DOS compatible batch handling.
My recommendation is to write a new application. I can't recommend writing it in a .NET language because you would be dealing with versions 1-4 and it is not installed on XP and older by default.
The way I see it, you have 3 options if you are writing it yourself: Visual Basic 6, Delphi (something old, v3 or older perhaps) or C/C++.
For C/C++ any version of Microsoft Visual C++ or MinGW/GCC will do but the older the better and you must not link to or use any C run-time library stuff (you might get away with static linking with MinGW but not recent versions of Visual Studio). If I was doing this I would use Visual Studio 6 or 2003 and build with /Zl & /NODEFAULTLIB. There are multiple small standalone CRT libraries if you need them. If you use any recent version of Visual Studio you will manually have to hex-edit the file to make it run on anything older than XP.
The actual implementation needs to call FindFirstFileA (and friends) on Windows 95/98/ME and FindFirstFileW on other systems to walk the directory tree and GetFileVersionInfoA/W (and friends) to get version info.
If you are feeling fancy you could perhaps filter out files in %WinDir% signed by Microsoft. Good luck...
I have standard instalations of some programs, and althou they are freeware and i can download them and install on any machine, things are not that easy always. When system crash and i dont have working machine or working internet connection or lan card or drivers for lan card i always struggle to find them and make them work if some dependency file is not on that version of windows.
What i need is to know is how can i make applications portable so i can run them from my usb or just copy them from my usb on pc and run, what dependency files application require, and what files and where specific application install?
It's a complicated story but let's try to summarize. Starts from the part "why?"
I'm an obsessive guy who seriously "hates" installers. I love to have a clean system without bloated in files reg entries and DLL's. Thats why I make nearly all (at least 97%) of programs that I use portable. I made more than 600 up to today and what I can say is;
You need:
1- A program to watch file system (what included after installation)
I use this. Simple and straight (sorry not freeware, but you can find tons of alternates)
http://www.samsunsegman.com/um/
2- A program to watch registry (what changed or included after installation)
I use this in HTML mode. Free fast and simple. And portable in nature.
http://sourceforge.net/projects/regshot/
Now scan the system with these 2, and than run the installer. After open the installed program and make your settings as you want. And than use this 2 program to find the added files and registry entries.
For files, delete them to trash can and take them back from trash in batch (easy to do like that) to the folder of application.
Registry, open the related branches in registry, delete any entries containing addressings like (plugins folder = c:\prog.... etc) After right click on main branch and select export. This is your reg settings...
3- Download this program http://ctuser.net/?reg2exe
This will convert your reg file to an exe file.
4- Download this application http://download.cnet.com/FilePacker/3000-2216_4-10414081.html
Note: Click on "Direct Download Link" if not you'll cnet will welcome you with their installer :)
And with this program (I use this because have no interference with any application) pack the program that you want to make portable. In wizard, first choose your reg-exe file after main programs file. Launcher will execute them with this order. And in setting choose "delete after terminate" will delete the extracted files on exit.
You can discover the further details. This helps you to portabilitize nearly 75% of simple applications.
5- For complicated programs or complicated needs you even can make home made loaders like
Before executing the app, put the user files under appdata folder (that I hate)
Put settings in registry (even with dynamically modified "path" addresses)
Choose which to execute (x86 or x64)
Execute in admin mode if needed
Execute the app... And when application is terminated...
Delete the settings from registry
Take the user files from appdata folder and put under programs folder (usb etc) back.
Delete left-over files under the system...
I just wrote these last ones to make you understand how far you can go. And for all these extra tricks, I use just and just bat files. And I convert them to exe also with this software. http://www.f2ko.de/programs.php?lang=en&pid=b2e (also free)
All the softwares that I use except "uninstall manager" are free. And with this technique, amazing but some of programs are running even faster.
Actually you can just use JauntePE or portable apps packer things but... Jaunte and similar sandbox making programs are so slow and not compatible with all. Even causing crashes. Portable apps approach is a bit bloated regarding to my strict spped and size standards. That's why I do it myself about for 10 years (yes even people was not talking about portability)
Note: I'm not a programmer, and you also don't need to be to do these.
I never released my portables, and you also shouldn't (read EULA's) for respect to authors.
But never forget to demand portable version from all authors. Force them to quit installers ;)
Best regards
inovasyon did a great job!
If you want to make some portable app that will work on every computer you move it to, then 99.9% of apps can be made portable.
If you also expect the app to not leave any files, folders or registry entries behind and not change or break things on the host PC's setup, then that limits things a bit further.
Apps requiring admin privileges to write to protected areas of the registry or file system will break when used on PCs with locked-down privileges.
Apps requiring services to be installed on the host PC will often leave them behind.
You must to know there are apps that are locked to specific PCs - Microsoft's recent versions of Office are a great example of this. They simply will not run when moved to another PC.
Also, you'll need some tools for making portable app: cameyo, thinapp, boxedapp, portableapps, spoon, app-v and other.
Portable applications will run from a flash drive, and from the computer.
Good Luck!
Here is a primer for setting up a portable app using the PortableApps.com tools. They have a page for developers that is quite helpful for some specifics, but the overall process is not well summarized. Here is the general outline for creating a portable application:
1. Investigate your application's footprints
Find all the files, registry locations and settings of the application you want to make portable (make use of point (1) and (2) in inovasyon's answer, and maybe take a look at Zsoft). It is usally a good idea to fire-up a virtual machine and track the application's changes without much clutter.
2. The PortableApp generator
Download, extract, and open the PortableApps.com Platform, and follow [The system tray icon] →[Apps] →[Get More Apps] →[By Category] to install the PortableApps.com Launcher, and NSIS (Unicode) needed to Portabilize your app. Alternatively, but with some added hassle, download both the PortableApps.com Launcher and NSIS Portable (Unicode version) as standalones.
You can now compile a project by running the PortableApps.com Launcher and pointing it to your project.
3. PortableApp layout and structure
Download the PortableApp.com Application Template (search for it here) to structure the data and files obtained in (1.) according to the specifications. Also, download some apps from portableapps.com for some practical examples of how they are structured, and to learn more about the struggles of portability (such as the substitution of drive letters in settings files to correspond to the movement of a portable drive).
As a "Hello World" example, try portability this simple program: helloworld.bat, with content:
#echo off
echo Hello World > log.txt
It writes all local environmental variables to the log file log.txt. You can play around a bit by trying to writing files to an %APPDATA% subdirectory and see if you can make your project redirect it to a portable directory.
4. Additional usage
If you need to do some additional coding that is not achievable with the default .ini capabilities (such as forcing only one instance of an app), add a NSIS script with file location App\AppInfo\Launcher\Custom.nsh to your project. Note that PortableApps.com's custom code guide incorrectly states the file location as Other\Source\Custom.nsh. It is also quite unhelpful regarding the layout of this script. Rather look at examples from other Apps and learn the NSIS syntax by Google-ing a bit.
So I have a compliled matlab code, 'Example.exe'...I want to create an installer package that does the following:
My exe file will reside on a network drive.
My installer will first ask the user for the installation path.
It will then copy the exe (along with some other supporting files) in the given path....IF the folder already exists, it will ask the user for overwrite confirmation.
After the copying is done, my installer will ask the user if they want to install the MCR and accordingly install it(or not).
After everything is done, a shortcut to the exe is created on the desktop.
My question is, is there some installer package generator that can do all this ?? I understand matlab can create an installer package, but I want my file to be copied from the network drive. I also don't have Visual Studio so, can't create an msi.
There's a simple way to do this, you'll need a software called IExpress, It can create a self-extracting executable (.EXE) or a compressed Cabinet (.CAB) file using the provided interface (IExpress Wizard). Its included in all versions of windows (I think..). To run the IExpress Wizard, go to your local drive then: Windows\System32, Search for "iexpress" then run the program.
then...
Follow these steps:
1. Run iexpress.exe
2. Create a new 'Self Extraction Directive' file
3. Extract files only
4. Specify the title, promt user options, license, etc
5. Start adding files to your package
7. Specify other options (window, message)
8. Enter the path where you want your package to be.
Then you're almost done, create your package (might take a few mins), distribute it, upload it and all.
For more details visit http://www.makeuseof.com/tag/how-to-make-an-exe-installation-file/
There is no simple way to do that. But if you tightly tied to Windows platform, you definitely can learn Windows Installer technology. It's NOT related to Visual Studio!
Just download WiX toolset (it is free and Open Source!) and learn MSDN docs about Windows Installer.
But it is complex way, remember. You can spent months learning how to make great Windows installers.
Ofcourse, you can use Inno Setup or NSIS, but I don't recommend that, because them re-engineer installer technology instead of native Windows Installer's.
If you want, I can learn you by Skype or something like. :-)
Or (isn't great offer?) I can write the installer for you and send you all code and describe which for what is.
Use iExpress! Available from win xoxo and over (xp)
With windows 8 pro you can make a package with your voice! Only with win 8 or 8.1 pro.
I've had a custom auto-update feature for my programs ever since Windows 95. It used to work fine, until Vista and then Windows 7. What it basically did was to download the new executable, create a batch file and execute it. The batch file simply waited for parent executable to close (by constantly trying to delete it) and then move/rename the downloaded new one as the old one. And even run the newly downloaded one. This worked fine for years. But Windows 7 doesn't really like me to do that. One thing is that it "knows" the executables are no longer same (even though their names and paths are same).
Is there a way to silently replace an executable with a new one by copying the executable properties/permission to the new one, so that Windows 7 won't complaint about it being a different exe? (Of course I need this for auto-update feature, so I'm open to other approaches as well)
Hmm ClickOnce w/ .NET works great for this... Don't know what you mean by windows 7 complaining about the exe however.
Not sure about the warnings you describe but I have had problems where I placed the update in a separate directory which broke the pinned item in the task bar.
One approach is to have thin loader which is installed once and then loads the updated program into its own memory space. That way it will be identified as the same program if pinned in the task bar.
I'm only familiar with using .NET AppDomain but I assume most other runtimes can do it as well.
I have an old legacy application around for which I only have the installer. it doesn't do anything more than uncompress and register itself and his library's.
As i don't have the source-code it gives me a lot of headaches in maintenance problems. In some particular computers (Acer Aspire One with Windows) just do not run.
I would like to extract the files and re-create this installer with NSIS. Is this possible or I'm nuts?
The original installer has been created with Ghost Installer Studio.
One option is to find a machine that it does run on, and then install some "install guard" software (often called things like Acme Uninstaller). Use this to track what actually gets installed and then copy the relevant files and write your own.
It looks like a lot of hassle to me, and you may be on thin ice with regards to the licence.
You could try using a program that monitors new files being installed and then get the files that were installed from their respective paths.
For instance, I found this in about 10 seconds with Google, there are more programs like it, but I am inexperienced with those available for Windows.
If it uses a MSI file, you can use Orca or SuperOrca to get at the stuff packed inside.
This is typically the job of Repackaging Software. There are a few ways such tools work but typically it is by taking a look at a system before and after you install it on a clean system and building a custom installer from the detected changes. This is normally done to generate a customized installation and/or one that can be automated in its deployment. I'm not aware of one that generates an NSIS package, the standard format today is MSI (Windows Installer).
If you have the original installer any repackager will do, but even without the original setup program you can do as some of the others here suggest and monitor the use of the application for its requirements. The two most popular repackaging tools are InstallShield AdminStudio and Wise Package Studio. The feature may also be part of a setup authoring solution, so check with your in-house developers if you can.
A full list of repackaging tools can be found here at AppDeploy.com
One free repackaging tool available for creating Windows Installer setups from another [legacy] setup tool (with which I must divulge I'm involved) is the AppDeploy Repackager. Another free repackager is WinINSTALL LE.