i have a big domain lists file for a proxy filter. In another file I have some exceptions i would like to remove from filter file all rows of excpetions file. Is it possibile with some "sed" operation?
Thanks.
You can generally use grep with the -v and -f options for this. In fact, you probably want to use fgrep or the -F flag as well to ensure the string are considered as fixed string rather than regexes. Without that, for example, the first line of the infile file below will be removed despite not actually matching the fixed string.
-v reverses the sense that that matching lines are thrown away rather than kept, and -f will get the patterns from a file rather than the command line.
For example:
pax> cat infile
http://wwwxdodgy.com/rest-of-url
http://www.dodgy.com/rest-of-url
ftp://this/one/is/good
https://www.bad.org/rest-of-url
pax> cat exceptions
http://www.dodgy.com
https://www.bad.org
pax> fgrep -v -f exceptions infile
ftp://this/one/is/good
It is easier to do this with grep:
grep -v -x -F -f /path/to/exclude /path/to/file
Related
How would I use sed to delete all lines in a text file that contain a specific string?
To remove the line and print the output to standard out:
sed '/pattern to match/d' ./infile
To directly modify the file – does not work with BSD sed:
sed -i '/pattern to match/d' ./infile
Same, but for BSD sed (Mac OS X and FreeBSD) – does not work with GNU sed:
sed -i '' '/pattern to match/d' ./infile
To directly modify the file (and create a backup) – works with BSD and GNU sed:
sed -i.bak '/pattern to match/d' ./infile
There are many other ways to delete lines with specific string besides sed:
AWK
awk '!/pattern/' file > temp && mv temp file
Ruby (1.9+)
ruby -i.bak -ne 'print if not /test/' file
Perl
perl -ni.bak -e "print unless /pattern/" file
Shell (bash 3.2 and later)
while read -r line
do
[[ ! $line =~ pattern ]] && echo "$line"
done <file > o
mv o file
GNU grep
grep -v "pattern" file > temp && mv temp file
And of course sed (printing the inverse is faster than actual deletion):
sed -n '/pattern/!p' file
You can use sed to replace lines in place in a file. However, it seems to be much slower than using grep for the inverse into a second file and then moving the second file over the original.
e.g.
sed -i '/pattern/d' filename
or
grep -v "pattern" filename > filename2; mv filename2 filename
The first command takes 3 times longer on my machine anyway.
The easy way to do it, with GNU sed:
sed --in-place '/some string here/d' yourfile
You may consider using ex (which is a standard Unix command-based editor):
ex +g/match/d -cwq file
where:
+ executes given Ex command (man ex), same as -c which executes wq (write and quit)
g/match/d - Ex command to delete lines with given match, see: Power of g
The above example is a POSIX-compliant method for in-place editing a file as per this post at Unix.SE and POSIX specifications for ex.
The difference with sed is that:
sed is a Stream EDitor, not a file editor.BashFAQ
Unless you enjoy unportable code, I/O overhead and some other bad side effects. So basically some parameters (such as in-place/-i) are non-standard FreeBSD extensions and may not be available on other operating systems.
I was struggling with this on Mac. Plus, I needed to do it using variable replacement.
So I used:
sed -i '' "/$pattern/d" $file
where $file is the file where deletion is needed and $pattern is the pattern to be matched for deletion.
I picked the '' from this comment.
The thing to note here is use of double quotes in "/$pattern/d". Variable won't work when we use single quotes.
You can also use this:
grep -v 'pattern' filename
Here -v will print only other than your pattern (that means invert match).
To get a inplace like result with grep you can do this:
echo "$(grep -v "pattern" filename)" >filename
I have made a small benchmark with a file which contains approximately 345 000 lines. The way with grep seems to be around 15 times faster than the sed method in this case.
I have tried both with and without the setting LC_ALL=C, it does not seem change the timings significantly. The search string (CDGA_00004.pdbqt.gz.tar) is somewhere in the middle of the file.
Here are the commands and the timings:
time sed -i "/CDGA_00004.pdbqt.gz.tar/d" /tmp/input.txt
real 0m0.711s
user 0m0.179s
sys 0m0.530s
time perl -ni -e 'print unless /CDGA_00004.pdbqt.gz.tar/' /tmp/input.txt
real 0m0.105s
user 0m0.088s
sys 0m0.016s
time (grep -v CDGA_00004.pdbqt.gz.tar /tmp/input.txt > /tmp/input.tmp; mv /tmp/input.tmp /tmp/input.txt )
real 0m0.046s
user 0m0.014s
sys 0m0.019s
Delete lines from all files that match the match
grep -rl 'text_to_search' . | xargs sed -i '/text_to_search/d'
SED:
'/James\|John/d'
-n '/James\|John/!p'
AWK:
'!/James|John/'
/James|John/ {next;} {print}
GREP:
-v 'James\|John'
perl -i -nle'/regexp/||print' file1 file2 file3
perl -i.bk -nle'/regexp/||print' file1 file2 file3
The first command edits the file(s) inplace (-i).
The second command does the same thing but keeps a copy or backup of the original file(s) by adding .bk to the file names (.bk can be changed to anything).
You can also delete a range of lines in a file.
For example to delete stored procedures in a SQL file.
sed '/CREATE PROCEDURE.*/,/END ;/d' sqllines.sql
This will remove all lines between CREATE PROCEDURE and END ;.
I have cleaned up many sql files withe this sed command.
echo -e "/thing_to_delete\ndd\033:x\n" | vim file_to_edit.txt
Just in case someone wants to do it for exact matches of strings, you can use the -w flag in grep - w for whole. That is, for example if you want to delete the lines that have number 11, but keep the lines with number 111:
-bash-4.1$ head file
1
11
111
-bash-4.1$ grep -v "11" file
1
-bash-4.1$ grep -w -v "11" file
1
111
It also works with the -f flag if you want to exclude several exact patterns at once. If "blacklist" is a file with several patterns on each line that you want to delete from "file":
grep -w -v -f blacklist file
to show the treated text in console
cat filename | sed '/text to remove/d'
to save treated text into a file
cat filename | sed '/text to remove/d' > newfile
to append treated text info an existing file
cat filename | sed '/text to remove/d' >> newfile
to treat already treated text, in this case remove more lines of what has been removed
cat filename | sed '/text to remove/d' | sed '/remove this too/d' | more
the | more will show text in chunks of one page at a time.
Curiously enough, the accepted answer does not actually answer the question directly. The question asks about using sed to replace a string, but the answer seems to presuppose knowledge of how to convert an arbitrary string into a regex.
Many programming language libraries have a function to perform such a transformation, e.g.
python: re.escape(STRING)
ruby: Regexp.escape(STRING)
java: Pattern.quote(STRING)
But how to do it on the command line?
Since this is a sed-oriented question, one approach would be to use sed itself:
sed 's/\([\[/({.*+^$?]\)/\\\1/g'
So given an arbitrary string $STRING we could write something like:
re=$(sed 's/\([\[({.*+^$?]\)/\\\1/g' <<< "$STRING")
sed "/$re/d" FILE
or as a one-liner:
sed "/$(sed 's/\([\[/({.*+^$?]\)/\\\1/g' <<< "$STRING")/d"
with variations as described elsewhere on this page.
cat filename | grep -v "pattern" > filename.1
mv filename.1 filename
You can use good old ed to edit a file in a similar fashion to the answer that uses ex. The big difference in this case is that ed takes its commands via standard input, not as command line arguments like ex can. When using it in a script, the usual way to accomodate this is to use printf to pipe commands to it:
printf "%s\n" "g/pattern/d" w | ed -s filename
or with a heredoc:
ed -s filename <<EOF
g/pattern/d
w
EOF
This solution is for doing the same operation on multiple file.
for file in *.txt; do grep -v "Matching Text" $file > temp_file.txt; mv temp_file.txt $file; done
I found most of the answers not useful for me, If you use vim I found this very easy and straightforward:
:g/<pattern>/d
Source
I would like to grep a number of documents by using a set of search terms and to specify the number of characters after match. Here is what I tried
grep -F -o -P "$(<search.txt).{0,4}" foo.txt
but I get the message 'grep: conflicting matchers specified' because -F and '-oP' cannot be combined. It does not work with '-E' either.
-F and -P are conflicting options, simple as that. The first means that the patterns are fixed strings, the second means that the patterns are Perl-compatible regular expressions. Perhaps you meant to use -f instead, which reads patterns from a file or a process substitution.
If you want to match any of the patterns in your file, followed by 4 characters, you could use something like this
grep -oP -f <(awk '{print $0 ".{4}"}' search.txt) file
This dynamically adds the pattern to each line in the file.
Alternatively, a more portable and concise version would be this:
sed 's/$/.{0,4}/' search.txt | grep -f - -oP file
Basically I want to copy several lines of code from a template file to a script file.
Is it even possible to use sed to copy a string full of symbols that interact with the script?
I used these lines:
$SWAP='sudo cat /home/kaarel/template'
sed -i -e "s/#pointer/${SWAP}/" "script.sh"
The output is:
./line-adder.sh: line 11: =sudo cat /home/kaarel/template: No such file or directory
No, it is not possible to do this robustly with sed. Just use awk:
awk -v swap="$SWAP" '{sub(/#pointer/,swap)}1' script.sh > tmp && mv tmp script.sh
With recent versions of GNU awk there's a -i inplace flag for inplace editing if that's something you care about.
Good point about "&&". Here's the REALLY robust version that will work for absolutely any character in the search or replacement strings:
awk -v old="#pointer" -v new="$SWAP" 's=index($0,old){$0 = substr($0,1,s-1) new substr($0,s+length(old))} 1'
e.g.:
$ echo "abc" | awk -v old="b" -v new="m&&n" 's=index($0,old){$0 = substr($0,1,s-1) new substr($0,s+length(old))} 1'
am&&nc
There are two issues with the line:
$SWAP='sudo cat /home/kaarel/template'
The first is that, before executing the line, bash performs variable expansion and replaces $SWAP with the current value of SWAP. That is not what you wanted. You wanted bash to assign a value to SWAP.
The second issue is that the right-hand side is enclosed in single-quotes which protect the string from expansion. You didn't want to protect the string from expansion: you wanted to execute it. To execute it, you can use back-quotes which may look similar but act very differently.
Back-quotes, however, are an ancient form of asking for command execution. The more modern form is $(...) which eliminates some problems that back-quotes had.
Putting it all together, use:
SWAP=$(sudo cat /home/kaarel/template)
sed -i -e "s/#pointer/${SWAP}/" "script.sh"
Be aware, though, that the sed command may have problems if there are any sed-active characters in the template file.
Trying to remove a line that contains a particular pattern in a text file. I have the following code which does not work
grep -v "$varName" config.txt
Can anyone tell me how I can make it work properly, I want to make it work using grep and not sed.
you can use sed, with in place -i
sed -i '/pattern/d' file
grep doesn't modify files. The best you can do if you insist on using grep and not sed is
grep -v "$varName" config.txt > $$ && mv $$ config.txt
Note that I'm using $$ as the temporary file name because it's the pid of your bash script, and therefore probably not a file name going to be used by some other bash script. I'd encourage using $$ in temp file names in bash, especially ones that might be run multiple times simultaneously.
try using -Ev
grep -Ev 'item0|item1|item2|item3'
That will delete lines containing item[0-3]. let me know if this helps
[Editorial insertion: Possible duplicate of the same poster's earlier question?]
Hi, I need to extract from the file:
first
second
third
using the grep command, the following line:
second
third
How should the grep command look like?
Instead of grep, you can use pcregrep which supports multiline patterns
pcregrep -M 'second\nthird' file
-M allows the pattern to match more than one line.
Your question abstract "bash grep newline", implies that you would want to match on the second\nthird sequence of characters - i.e. something containing newline within it.
Since the grep works on "lines" and these two are different lines, you would not be able to match it this way.
So, I'd split it into several tasks:
you match the line that contains "second" and output the line that has matched and the subsequent line:
grep -A 1 "second" testfile
you translate every other newline into the sequence that is guaranteed not to occur in the input. I think the simplest way to do that would be using perl:
perl -npe '$x=1-$x; s/\n/##UnUsedSequence##/ if $x;'
you do a grep on these lines, this time searching for string ##UnUsedSequence##third:
grep "##UnUsedSequence##third"
you unwrap the unused sequences back into the newlines, sed might be the simplest:
sed -e 's/##UnUsedSequence##/\n'
So the resulting pipe command to do what you want would look like:
grep -A 1 "second" testfile | perl -npe '$x=1-$x; s/\n/##UnUsedSequence##/ if $x;' | grep "##UnUsedSequence##third" | sed -e 's/##UnUsedSequence##/\n/'
Not the most elegant by far, but should work. I'm curious to know of better approaches, though - there should be some.
I don't think grep is the way to go on this.
If you just want to strip the first line from any file (to generalize your question), I would use sed instead.
sed '1d' INPUT_FILE_NAME
This will send the contents of the file to standard output with the first line deleted.
Then you can redirect the standard output to another file to capture the results.
sed '1d' INPUT_FILE_NAME > OUTPUT_FILE_NAME
That should do it.
If you have to use grep and just don't want to display the line with first on it, then try this:
grep -v first INPUT_FILE_NAME
By passing the -v switch, you are telling grep to show you everything but the expression that you are passing. In effect show me everything but the line(s) with first in them.
However, the downside is that a file with multiple first's in it will not show those other lines either and may not be the behavior that you are expecting.
To shunt the results into a new file, try this:
grep -v first INPUT_FILE_NAME > OUTPUT_FILE_NAME
Hope this helps.
I don't really understand what do you want to match. I would not use grep, but one of the following:
tail -2 file # to get last two lines
head -n +2 file # to get all but first line
sed -e '2,3p;d' file # to get lines from second to third
(not sure how standard it is, it works in GNU tools for sure)
So you just don't want the line containing "first"? -v inverts the grep results.
$ echo -e "first\nsecond\nthird\n" | grep -v first
second
third
Line? Or lines?
Try
grep -E -e '(second|third)' filename
Edit: grep is line oriented. you're going to have to use either Perl, sed or awk to perform the pattern match across lines.
BTW -E tell grep that the regexp is extended RE.
grep -A1 "second" | grep -B1 "third" works nicely, and if you have multiple matches it will even get rid of the original -- match delimiter
grep -E '(second|third)' /path/to/file
egrep -w 'second|third' /path/to/file
you could use
$ grep -1 third filename
this will print a string with match and one string before and after. Since "third" is in the last string you get last two strings.
I like notnoop's answer, but building on AndrewY's answer (which is better for those without pcregrep, but way too complicated), you can just do:
RESULT=`grep -A1 -s -m1 '^\s*second\s*$' file | grep -s -B1 -m1 '^\s*third\s*$'`
grep -v '^first' filename
Where the -v flag inverts the match.