Every time I try to install (5 attempts) I get:
Error 2753. the File "agent.exe.6ED28686_7b19_420c_b255_5b6c1bd2c705" is not marked for installation
I've tried uninstalling, deleting the install folder after installing, clearing out temp files, restarting the machine and making sure I run the setup as administrator but I get this every time. I've even followed some advice about putting the installer files in c:\cr4vs2010 but to no avail.
The customer I'm developing for has Crystal skills so no other reporting engine will do.
EDIT
Found out about the FLEXnet transformer that fixes the above error. However, on completion of the install I get an error "The operation could not be completed" in a dialog box headed "Visual Studio".
I've fixed it I think. I now have Crystal Templates.
To fix.
Get the Flexera tool at
http://kb.flexerasoftware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=Q207355&sliceId=
Run the tool as instructed and install the two msi's using it. I did the VS install first, then the 64-bit runtime.
After getting the "The operation could not be completed" error and installing both msi's, open up the Visual Studio Command prompt, ensuring you elect to Run as Administrator.
execute the command line devenv /installvstemplates. This takes a few minutes.
That fixed it for me.
Related
I'm currently trying to publish my AWS lambda functions using Visual Studio 2019 community (v4.8.03752) and leveraging the AWS Toolkit for Visual Studio (v1.20.1.0). After right clicking my project and selecting 'Publish to AWS Lambda' I receive the following error:
- Zipping publish folder C:\Users\Matt\source\repos\programName\programName\.\bin\Release\netcoreapp3.1\publish to C:\Users\Matt\AppData\Local\Temp\HelloWorld-CodeUri-Or-ImageUri-637489827969959200.zip
- Failed to find the "build-lambda-zip" utility. This program is required to maintain Linux file permissions in the zip archive.
- Error packaging up project in C:\Users\Matt\source\repos\programName\programName\. for CloudFormation resource HelloWorld: Failed to find the "build-lambda-zip" utility. This program is required to maintain Linux file permissions in the zip archive.
I've been able to deploy this MANY times over previous months, up until Friday 2/12 when I started receiving this error (after a reboot). What's even more strange is that if I uninstall the AWS Toolkit for VS, then reinstall it, I'm able to publish successfully 1 time. With my 2nd attempt, I begin to receive this error again.
Steps I've taken to attempt to resolve:
Repair Visual Studio
Uninstall/Reinstall Visual Studio
Uninstall and reinstall amazon.lambda.tools using dotnet tool install -g Amazon.Lambda.Tools
Uninstall AWS Toolkit for VS, Reinstall toolkit. (This works for first deployment, fails when trying to deploy a 2nd time)
UPDATE:
Per some comments below, it looks like this is being caused by McAfee Real-Time Scanning. In checking the logs during a deployment I noticed a "Virus or threat found" record that points directly to the build-lambda-zip.exe file. To permanently avoid this issue moving forward please follow the steps provided by user2174794 in the comments below.
I'm having the same issue. Just started happening today. It was working within the last 2 weeks.
Failed to find the "build-lambda-zip" utility. This program is required to maintain Linux file permissions in the zip archive.
Running Windows 10, Visual Studio 2019
My solution for now is to use the .NET Core CLI
https://docs.aws.amazon.com/toolkit-for-visual-studio/latest/user-guide/lambda-cli-publish.html
Specifically, the
dotnet lambda deploy-function
A recent update must have broke the AWS Toolkit For Visual Studio.
I have the same problem, it was because my antivirus detect the executable build-lambda-zip.exe, then delete it.
I restore the executable from my antivirus, or restore dotnet tools with the command :
dotnet tool update -g Amazon.Lambda.Tools
I also faced the same issue,
This is because the "build-lambda-zip.exe" file is getting removed by the McAfee Antivirus.
For the permanent fix, you need to follow the below steps.
Step 1
Go to McAfee Settings >> Quarantined Items
You will find the "build-lambda-zip.exe" file there. Restore it to the original location.
Now If you will try to publish, the error won't get displayed. But again on the next scan, the file will get removed.
Step 2
We need to Exclude this file from getting Scanned and removed. So for that,
Go to McAfee Settings >> Real-Time Scanning and Add the "build-lambda-zip.exe" file in the Excluded files list.
For the file path of "build-lambda-zip.exe" got to
C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\Common7\IDE\Extensions\ and search for the file name.
Maybe you should try reinstalling the AWS Tool Kit and before you make deployments please turn off your antivirus protection. I was troubbling the same issue and my antivirus(McAfee) was deleting build-lambda-zip.exe file when I did deployment first time.
I'm curious about the state of the extension installation. Can you go to VS's extension directory in Windows explorer C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\Common7\IDE\Extensions and in the search box search for AWSToolkitPackage.dll.
Ideally it should only show one instance of that file. Assuming it finds a single instance right click on the file and select "Open File Location". Now that you are in the root folder of the AWS extension check the Resources folder and see if it contains the file build-lambda-zip.exe.
I know the question is in a windows system, but under a linux system, in my case the following command was needed:
sudo apt-get -y install zip
This error presents itself immediately upon first launch of the program following the attempted install.
click to enlarge
I have ran %programfiles(x86)%\Microsoft Visual Studio\Installer\resources\app\layout\InstallCleanup.exe -full and then re-ran the installer and the issue still presents itself.
I have tried the solutions here and they did not resolve my issue.
I also tried both of the answers here.
Any guidance here or things to try next will be very helpful!
Here are my log files from when I tried this in March. They're old, but re-running this installation still shows the exact same error.
https://pastebin.com/7D2JwGKF
for i in 12 do this.function
try this one
Open a command prompt with admin privileges
Run following command (this will clean up previous install cache. -full option is important) "%programfiles(x86)%\Microsoft Visual Studio\Installer\resources\app\layout\InstallCleanup.exe" -full
Restart the installer
A product matching the following parameters cannot be found during VS Installation
I'm trying to install the package of Microsoft Visual C++ Redistributable as my xampp apache module cannot be installed. The installation take a very long time to complete. What should I do? Is this common and is all I have to do is wait?
They are dead stuck with this setup progress as the indication
Processing: Windows7_MSU_X64
To install the Visual C++ 2015 Redistributable, you do not need to remove or uninstall the previous versions.
Refer to the error message, you can have a look at the installation log file and search ‘error’, if you can find the error message about Windows6.1-KB2999226-x64.msu, check this similar issue and have a try with the following to troubleshot this issue:
Download the update KB2999226 for your OS edition from here: Update for Universal C Runtime in Windows and before it, since your OS is windows 7, make sure SP1 is installed.
Manually install the KB2999226 as below:
Find the Windows6.1-KB2999226-x64.msu from the folder C:\ProgramData\Package Cache\xxxxx\packages\Patch\x64, which you can the path from the installation log
Create a folder named ‘XXXX’ in that and execute following commands from Admin command prompt
wusa.exe Windows6.1-KB2999226-x64.msu /extract:XXXX
DISM.exe /Online /Add-Package /PackagePath:XXXX\Windows6.1-KB2999226-x64.cab
vc_redist.x64.exe /repair
If you have no idea about the installation log, you can go to %temp% and order by ‘Date modified’, then you should find the installation log, or you can use http://aka.ms/vscollect to gather the installation logs. After using it, you will find vslogs.zip under %temp% folder then upload the file to https://onedrive.live.com/ and share the link here.
I first tried a clean boot and that didn't work so I opened up the task manager to see what other processes I might kill while it was stuck at "Processing: Windows7_MSU_X64" I killed the process titled "windows update standalone installer" and the install completed successfully the moment I killed that process.
Okay, I found the solution for my stucked installation. I updated my Windows manually using wsusoffline tools as my Windows can't seem to update with the usual ways.
Install wsusoffline and select all update for Windows (Windows 7 for me). Make sure to choose the folder to save your update.
Wait for the update to be downloaded
Install the update
Install the MV C++ Redistributable again
Done!
I finally can install my Xampp Apache module and access to the localhost.
I am trying to install the Visual Studio 2015 Update 3, but I am receiving an error each time. I have tried both the web installer and the ISO, and I have also tried going into Control Panel/Programs and modifying the 2015 install. All of these result in the same error: "Setup Engine - The parameter is incorrect". I've read about some of the other issues with the installer, but I'm hoping somebody else might have seen this one or something similar. The logs always have the following error in them:
[1B10:1DA0][2016-07-18T11:39:28]e000: Error 0x80070057: Failed to convert version: to DWORD64 for ProductCode: {284FA9A0-CEDD-81D3-5A19-5858E95FD0C4}
[1B10:1DA0][2016-07-18T11:39:28]e151: Detect failed for package: Win10_Universal_CRT_SDK_Extension_SDK, error: 0x80070057
I have even tried to download the full installer for VS2015, but all installers seem to run through the same error. Any ideas on how I might repair this particular component so the installs will succeed?
Additional information, this is happening on a VM of Windows 10 running in Parallels 11.
Screen shot of installer failing
I found a similar issue here： https://connect.microsoft.com/VisualStudio/feedback/details/974081/visual-studio-update-3-installation-keeps-failing-error-message-setup-engine-the-parameter-is-incorrect
The reply from Heath[MSFT]:
The logs confirm that some of your Windows Installer product
registration is corrupt. For the first issue, open a command prompt
(preferably elevated to avoid multiple UAC prompts later) and run the
following:
start /wait msiexec /fomus {284FA9A0-CEDD-81D3-5A19-5858E95FD0C4} REINSTALL=ALL
That should get
you past the first problem. If it does not, manually remove the
product like so and re-install it from the package cache:
start /wait msiexec /x {284FA9A0-CEDD-81D3-5A19-5858E95FD0C4} IGNOREDEPENDENCIES=ALL
start /wait msiexec /i "C:\ProgramData\Package Cache\{A79F6653-6AF1-4AF2-BC15-F5D6C05E1E6A}v2.0.40326.0\packages\sptoolsDependencies\enu\WorkflowManagerTools_x64.msi" ADDLOCAL=ALL NOVSUI=1
(change the above file
WorkflowManagerTools_x64.msi according to your log file record) After
this, installing VS Update 3 should work.
I had a very similar problem which at its root exhibited the same issue identified above in the Visual Studio 2015 Update 3 setup error (I couldn't install SSMS 17.1 which uses the Visual Studio 2015 Isolated Shell). I tried the solution above which unfortunately did not work for me. I did some more digging through the vs_isoshell.exe log file and found lines similar to those below.
[6BE0:36E0][2017-07-13T13:05:36]i000: Error 0x80070057: Failed to convert version: to DWORD64 for ProductCode: {9A7E3828-17FB-3E0C-9B28-48493E01937A}
The ProductCode refers to the "Microsoft Visual C++ 15 x86 Debug Runtime - 14.10.24269".
A perusal of my installed programs showed I did not have this installed, and I was unable to install it again due to a later version being present (it turns out it was upgraded, or removed, when I installed Visual Studio 2017).
I did some more searching and came across this page which had steps I adapted to my situation. I performed the same registry profiling of the installer with Process Monitor and the same key was missing. I added a key called DisplayVersion (string - REG_SZ) to the path below with a value of 14.10.24629 and that worked.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\8283E7A9BF71C0E3B9828494E31039A7\InstallProperties]
Adding the key/value pair allowed the installation of the VS 2015 Update 3 Isolated Shell to finish successfully which in turn allowed the SSMS 17.1 installation to complete successfully.
I tried to install Visual Studio Community 2015 on a fresh copy of windows 10, after having to reinstall it because of boot loop.
But i got a very strange error during the installation that i could not debug.
here's error message from the installer:
http://imgur.com/a/GFMAi
and also error log
https://docs.google.com/document/d/1_c5-heqG2ln0tHh17NGYDGOBOmJEV2Du9UILXmmzYyg/edit?usp=sharing
i tried several solutions on the web but nothing changed.
Any help?
TL;DR:
VS installation tries to open nonexistent files?
After parsing multiple error logs, one error was persistent across them which was caused by "custom culture", so i went to my region settings and changed format from English(Europe) to English(United Kingdom) and after that i got less errors.
I also had to do some registry cleaning because installation tried to use bundle packages that were not present on my PC. I wish this installer would try to reinstall them instead of just giving up.