I am programming an app for an experiment by the University of Queensland Psych Department. The app needs to be impossible to exit, or at least it would be preferable if it were impossible to exit. This is not a virus- it is for an experiment with the Grute Eylandt Aborigines. Anyways, do any of you guys have any idea how to set the app to be impossible to exit, or even better, to set it so that you have to enter a password to exit it? Furthermore, on a separate subject, do you guys have any idea how I can save the information in the app to the iPhone? This app will not go through the App Store so it does not need to follow App Store rules. Therefore, if there was a way to save "Button (whatever button it is) pushed at (time and date)" to the notes section of the iPhone every time a button was pushed in the app, and/or to save audio recorded using the AudioToolbox framework to the actual iPod library, that would be fantastic. Otherwise I would have to make some sort of db or plist file to save everything with if-then statements, I think. Thank you!
Check-out iOS 6 Accessibility feature:
It allows a parent, teacher, or administrator to limit an iOS device
to one app by disabling the Home button, as well as restrict touch
input on certain areas of the screen
Put the device in a "kiosk" case so keep the home button from being pressed. For storing the data to the device, if it is a small amount of data, use NSUserDefaults, if this will be a large amount of data, I would lean more toward Core Data
Easiest solution on the market -- MOKIMOBILITY has developed software that allows you to lock the home button. It is Mobile Device Management software with a full range of security features. It essentially locks down your iPad so the user is only able to use what you what them to use. It is called +MDM www.mokimobility.com The software can be managed mobile-y from a central interface. Slick software.
Related
I'm exploring the end user experience for a beacon prototype but I'm struggling to find any end-user scenarios that involve the app becoming active / opening up on the screen when within range.
I can get the app to send a notification and this is the most likely experience on both Android and iOS but does anyone know if it is possible to get the app to open up?
It's unlikely that I'd want real customers to have their experience interfered with in this way, I think it's ok if the app is already running and is open but not if it's running but not open.
Thanks
On Android this is possible. The reference app for the Android Beacon Library demonstrates how to do exactly this.
On iOS, it is not possible due to OS security restrictions. See here for details. The best you can do is send a local notification to the user when the beacon is detected, then if the user gestures to it, bring up the app.
Basically, I'm looking for any way to go about this at all, no matter how cumbersome or unintuitive, so long as it can be done on iOS 7 (which the third party SBSettings framework currently cannot), and can be done on a non-jailbroken device.
This is for an app which will be loaded into iPads in a physical enclosure so the power button is inaccessible. The device itself will be in single app mode, which cannot be enabled or disabled except through our network-accessed MDM solution. The issue I'm trying to find a way around is that every now and then, the network connection stops functioning and the only way to re-establish it is to restart the device, which can't be done without an internet connection other than to physically press the inaccessible buttons. The reboot action would be password-locked in a hidden event handler and so inaccessible to normal users. This is not an app that will ever see the app store, so Apple's user interface guidelines don't necessarily apply.
Alternatively, is there any way to enable/disable assistive touch programmatically or any other possible method that will enable rebooting the device while in single app mode without physically touching the power button?
This is not a real answer (just thinking aloud).
Obviously, you can't do this through public API.
I believe, API's like SBReset can't do this either, because they are protected by entitlement.
I believe your simplest option to find some reasonably low level API which crashes and use it to crash a device.
I had exactly the same question some time ago:A way to reboot iOS device or restart Springboard using private API?
P.S. I don't have a way to find these crashes. I would recommnd to talk to jailbreak community (people who come up with jailbreaks for iOS devices). They collect all kinds of crashes. Most of these crashes aren't exploitable. However, you don't need an exploit, you just need a OS crash.
I am developing a windows phone app that uses users current location, I am making the app in 7 OS. My question is, Can I track the location in background, that is when the screen is locked?
I know this is a possibility in wp8 as it provides us with GeoLocator class, but can I achieve this in wp7? I am basically making a runtracker app hence I would like my app to track the location even when its in background, is it really feasible?
Your help is always appreciated!!
It is possible to keep the app running under lock screen, as it does, for example, Endomondo app.
Using Idle Detection, you can keep the app on, although screen is locked, and you can keep on tracking the location. Actually, it is not running in background, but in the foreground. Just the screen is locked. So, be careful not to drain user's battery.
You have to set the PhoneApplicationService.ApplicationIdleDetectionMode property to Disabled, for example in InitializePhoneApplication() method in App.xaml.cs:
PhoneApplicationService.Current.ApplicationIdleDetectionMode = IdleDetectionMode.Disabled;
Note that there are special certification requirements for this type of apps. Refer to section 6.3 (Apps running under a locked screen) of the following page:
Additional requirements for specific app types for Windows Phone
I got the same problem in one on my apps..
I don't think it' s feasible for wp7..
Bt if you want to do it with wp8 you can refer following link.
http://msdn.microsoft.com/en-us/library/windowsphone/develop/jj681691%28v=vs.105%29.aspx
And to know about background supported and unsupported API's http://msdn.microsoft.com/en-us/library/windowsphone/develop/hh202942%28v=vs.105%29.aspx/css
GeoCoordinateWatcher Class exists in WP7, but here is the documentation from MSDN -
This API, used for obtaining the geographic coordinates of the device,
is supported for use in background agents, but it uses a cached
location value instead of real-time data. The cached location value is
updated by the device every 15 minutes.
More Info : http://msdn.microsoft.com/en-us/library/windowsphone/develop/hh202962%28v=vs.105%29.aspx/css
I have an app that I have been developing that can display sensitive user data.
When the user backgrounds the app, the OS appears to take a screenshot of the app as it was running, and displays it so when the user returns, their state is restored.
I am trying to prevent the user's information from being seen in this screenshot.
My initial idea was to display a Popup of my splash screen image, but it does not seem to render it in ApplicationDeactivated. Is there any other way you might accomplish this?
I am not sure you are analyzing this correctly. I don't see how the OS could take a screenshot of an app and use that to restore state. Also, if it was true that the OS did that, Tomb Stoning wouldn't be such a big issue in the requirements for an app in the submission process. A dev needs to handle grabbing and saving state on exit and reloading it on start-up again.
If you didn't code this tomb stoning, are you using a frameowrk that has built in support for this? You could disable the tombstoning so certain pieces of information are not stored, and in fact if this data is that sensitive you should make sure it isn't saved. But, if you save it make sure you encrypt it so nothing else could examine the saved state. Although, that shouldn't be possible on Win Phone as the OS is supposed to enforce the boundries between apps.
Received a response from Microsoft which indicates that this is not possible in the Mango SDK; it may be added into future releases of the platform.
Is it possible to track the accelerometer value while under the lock screen?
I managed to write a simple application which counts from 1 up to 100 using a timer which fires an event on which I increment a counter.
But when I use register a handler for the ReadingChanged event of the accelerometer it will not be fired anymore once the screen has been locked. Even if I unlock the screen again I will have to readd my handler.
the msdn documentation tells on the one page:
http://msdn.microsoft.com/en-us/library/windowsphone/develop/ff941090(v=vs.105).aspx
"Valid reasons to disable idle detection in Windows Phone OS 7.1 applications include ones where core functionality continues while the phone is locked (for instance, an exercise tracking app)"
but the sensor api also tells:
http://msdn.microsoft.com/en-us/library/windowsphone/develop/hh202968(v=vs.105).aspx
"The Sensor APIs cannot be used while the application is running under the lock screen. For more information, see Idle Detection for Windows Phone. The Sensor APIs also cannot be used in background agents. For more information, see Background Agents Overview for Windows Phone"
I hope they will change the api soon, because of that it is not possible to write any good sleep tracking / sport tracking applications ... :(
I was helping a guy with this a couple of days ago. He had an app that tracks GPS and accelerometer data under lock screen.
Turned out the app accelerometer data stopped tracking when under manual or auto lock screen.
There may be an issue here to be looked into.
Under lock screen it is a good idea to minimise power usage... disable all uncessary code, like ui updates. My understanding of one the motivations for idle detection and running under lockscreen being opened up during CTP was in response to a lot of feedback from developers of map/tracking apps that basically need this for their app to be of any use.
I'm not sure of the usage case where you'd want to use the accelerometer under the lock screen.
Apps typically run under the lock screen when you need them to do something when you're not interacting with the device. e.g. playing music or downloading a large file.
If you wanted accelerometer data I'd assume that the device is being held and, therefore, presumably, looked at. Given this, why would you therefore want to run under the lock screen?
That being said, if you had a good reason to do so, you should still be aware that:
when your application runs under a locked screen, it ... must minimize
power usage
(from the Marketplace Certification Requirements.)
In my understanding, reading values from sensors is not minimizing power usage.