I am using Visual Studio 2010 and I would like change debugging environment from the localhost to my full computer name/domain. Does anyone have some step by step instructions on how to do this? (I would also like to set it up as the default for all new projects plus how to change it in existing projects). I am new to using visual studio and programming in general.
I found this post Visual Studio 2010 - Change localhost to custom domain in the forum but it wasn't clear to me on how to make the change. I went to the project properties web tab and attempted to set up local IIS Web server but got the following error:
"ASP.NET 4.0 has not been registered on the Web server. You need to manually configure your Web server for ASP.NET 4.0 in order for your site to run correctly."
I am not ever sure if that was the correct way of going about doing this. I just need my debug url address to go from:
"http://localhost:53674/Projectname.aspx"
to:
"http://computername.pag-domain.webname.org/Projectname.aspx"
Thanks!
For fixing the iis web server, I am not really sure what was done...our IT department worked on that. For setting up the local IIS webserver in visual studio I did the following: In the web project properties, under the web tab, I choose "Use Local IIS Web server, in the project URL, I put the full computer domain and told it to create a virtual directory.
Got it. Our IT came to the rescue — he fixed some issues with the ASP.NET not accessing 4.0 correctly. Then I set up the "Use Local IIS Web server" correctly and it worked like a charm.
Related
I'm new to web-servers. I have Internet Information Services (IIS) 10 Express installed on Windows 10. I'm trying to develop an Office add-in so as to host it in the same computer I use. The problem is how do I host the add-in in a local web server? Since I'm new would appreciate a little of step by step answer.
while you are developing the add-in, you do not need to worry about a local web server. The Visual Studio tools take care of all that for you (it will run in a web server provided by Visual Studio).
If you are using Visual Studio 2015 (the community edition is free and works fine with Office add-ins), you simply create a new 'office add-in' project and it will all be set up for you. It will create a 'web project' for you and it will use that web project when you run the application locally - you do not need to do anything to make that happen.
You may find that you have to install the Office tools for Visual Studio but if you go to File > New > Project > Visual C# > Office/SharePoint you'll get a link to download the tools if you do not already have them.
In terms of hosting it in the public domain, I like to use the Azure Web App service as you can very easily publish directly from Visual Studio or you can setup continuous integration with GitHub, VSO etc. Once you have it hosted in the public domain, you simply change the 'Source Location' in your office add-in manifest file to point at your public URL.
Well I figured it out.
Except it broke my VS Setup now (Resolved)--> See here Installing IIS broke Visual Studio Office Add In Project Localhost
To enable IIS I had to open "Programs and Features" and select "Internet Information Systems".
Then start --> IIS. Browse to default site and added binding for SSL/Port 44367 (Same as VS). I already had a SSL cert from previous configurations, selecting the Dev Cert worked fine.
I copied everything from \ExcelWebAddIn1\ExcelWebAddIn1Web\* to the webroot C:\inetpub\wwwroot and adjusted the following in manifest.
replace:
~remoteAppUrl
with
https://localhost:44367
I then sideloaded the manifest and it worked as expected.
Note that Martin Kearn's answer still applies, this isn't needed if you want to just use VS and it has better debugging, but I wanted to test and learn.
This was all to test/debug deployment, and I was able to do the same by just changing the localhost url to a simple nginx webserver w/ the contents of the above webroot.
I'm trying to debug an ASP.NET 4.0 web site using Visual Studio Express 2012. I've configured the project settings to use the local IIS web server which was installed with VS. I need to use IIS so that urlrewritingnet will work.
I need to run the site locally without a port number. Currently it runs as http://localhost:4652/ which breaks some of the routines since they reference Request.Url.Host. This results in attempts to access resources using http://localhost/.
There is a lot of code to this site and it would be extremely easier and quicker (I think) to just configure my local debug to run on localhost instead of localhost:4652. Is there a way of doing this?
Since it's IIS Express installed with VS there is no configuration manager for IIS. When I click PROJECT -> mysite Properties and change the Project Url (under Use Local IIS Web Server) to http://localhost/ I get a warning that reads:
The local IIS Express URL http://localhost/ specified for Web project mysite has not been configured. To keep these settings you need to configure the virtual directory. Would you like to create the virtual directory now?
When I click on Yes, I get another dialog box saying:
Unable to create the virtual directory http://localhost/
Does anyone know if this should or should not work and if it can work, how do I do it?
You can go to "user/documents/iisexpress/config" then open applicationhost with notepad or other relevant editor then go find "bindings" then change the value of bindingInformation into "*:80:localhost". Done
Its really simple. You need to attach the IIS process to the visual studio and browse the website.
Below article guides to achieve this.
http://www.codeproject.com/Articles/37182/Debug-your-ASP-NET-Application-while-Hosted-on-IIS
Its always a good practice to do a unit test of web apps to local iis while developing.
In a Visual Studio "WCF Service Application" project, on the properties->web page, if I select "Use Local IIS Web Server"->"create virtual directory"...it creates the IIS application successfully in the Default Web Site of a local IIS 7.5 install. So far so good.
However, I'd like to use a site other than the default web site. My attempts to host the service in a different web site aren't working. I tried:
Delete the application / virtual directory in IIS that Visual Studio successfully created.
Manually create a new IIS application, in the different web site, using the same settings that were present in the IIS application previously created by Visual Studio automatically.
Go to Visual Studio, project properties->web, and select the "visual studio development server". Save. This is just an "erase" step.
On the same properties page, I select "Use Local IIS Web Server" again and hit save (without pressing "Create Virtual Directory").
In that last step, I expect it to save. It doesn't. It pops up a message saying the virtual directory does not exist. But as I stated, it does exist because I had manually created it just prior.
My own guesses about this problem:
*. The non-default site I've made is somehow different from the default web site, in a way I've yet to determine.
*. Visual Studio is not designed to work with a virtual directory that is not in the default web site.
Any suggestions or clarifications?
I've activated IIS "failed request tracing," but no records are created for this issue.
What you want to do is look at your second site is IIS (the one you want the WCF service to run under) and look at the host name on new or if you go to manage web site -> advanced settings and look at what is after the the bindings. So it may show something like: http:*:80:localhost2 . localhost2 is what you need. It may be an IP Address too, not sure how you set it up.
So then in your WCF project properties in the Use Local IIS Server -> Project URL you put the host name of the site. So for example it may be something like: http://localhost2/yourservice.svc .
I am trying to make Visual Studio 2010 to run my project under a local instance of IIS 7.5 instead of starting the web development server. There is no problem deploying it to IIS, but when i try to browse to the site, it's like the routes never been registered in IIS because i get error "The Web server is configured to not list the contents of this directory." when i try to browse "http://localhost/returnjson", and when i browse "http://localhost/returnjson/Home/Index" i get error 404. And there is nothing wrong with the routes in my project, it works under web development server. What could be the problem?
It's hard to say what's wrong here but there are a couple of things you could try.
You could be looking at the wrong application. IIS comes pre-configured with a default application that acts as a catch all. Any unmapped domain name will end up there. So, by default when you visit localhost you'll end up there.
If you deployed your application into a new IIS site, make sure you bind it a proper domain name like myapp.local. Then add that domain name to your hosts file (%Windows%\System32\Drivers\etc\hosts) and map it to IP 127.0.0.1.
Another thing that could be wrong is that your IIS configuration is a bit screwed up. It happens sometimes. You can fix that with aspnet_regiis like so:
aspnet_regiis -ir
This tool is located under:
%Windir%\Microsoft.NET\Framework\v4.0.30319
Right click on your MVC3 project and select Publish. Publish it to the Filesystem and select a folder on your hard drive.
Navigate to your published folder and copy everything in it.
It's a pain in the keister but you can get through it.
Your folder in C:\inetpub\wwwroot should look like this after pasting your published application into the wwwroot:
Can you confirm that your folder looks like this?
You could also try out IIS Express in stead of IIS 7.5
IIS Express is a lightweight, self-contained version of IIS optimized for developers. IIS Express makes it easy to use the most current version of IIS to develop and test websites. It has all the core capabilities of IIS 7 as well as additional features designed to ease website development
I have my development PC on Windows 7 for ASP.NET and running Visual Studio 2010 and IIS 7 (NOT using the development web server). I have created multiple websites on different ports on my PC. E.g. http://localhost:8080 points to Website A. But when I open the site in Visual Studio, the project name shows as http://localhost:8080, as follows.
I would like to change that name to http://WebsiteA or http://WebsiteA:8080. Some identification.
I edited hosts and added
127.0.0.1 WebsiteA
Ping works fine. Also browsing WebsiteA:8080 works fine. But when I try opening the site (http://websitea:8080) in Visual Studio, it says Web site does not have Frontpage server extensions installed.
Is there any way to at least rename what's shown in the project list in Visual studio. I just need an identification on each website. I have about a dozen project and more may be added.
Thanks
IIS in Windows 7 allows you to have named virtual hosts. You can use that to separate out your sites. Visual studio cooperates with the naming of the virtual hosts. You will need to configure your visual studio project to operate against IIS (for debugging and running) rather than the visual studio built in web server.
Managed to find a way. This is what I did. Went to IIS Management, Created a new Website - Give it a name WebsiteA, Choose the folder where the web is located and give it a Host Name - WebsiteA. Click OK
Then go to Application Pools. You'll see your Host name there. Change the ASP.Net version to 4.0 or whatever you want. Then add a hosts entry 127.0.0.1 WebsiteA.
Now you can add http://WebsiteA in Visual Studio.
Thanks for all the help guys