I am trying to use the po2json parser/converter from the JS gettext library (http://jsgettext.berlios.de/), but when I try to convert I get this error:
Can't locate JSON.pm in #INC (#INC contains: /Library/Perl/5.12/darwin-thread-multi-2level /Library/Perl/5.12 /Network/Library/Perl/5.12/darwin-thread-multi-2level /Network/Library/Perl/5.12 /Library/Perl/Updates/5.12.4 /System/Library/Perl/5.12/darwin-thread-multi-2level /System/Library/Perl/5.12 /System/Library/Perl/Extras/5.12/darwin-thread-multi-2level /System/Library/Perl/Extras/5.12 .) at ./po2json line 23.
BEGIN failed--compilation aborted at ./po2json line 23.
As far as I understand I am missing a perl module, namely JSON.pm, an I think it's this one: http://cpansearch.perl.org/src/MAKAMAKA/JSON-2.53/lib/JSON.pm
Now, how do I install it on OSX? I am using Mountain Lion.
I tried to do cpan install JSON, but it doesn't work, I get the following error:
Writing Makefile for JSON
MAKAMAKA/JSON-2.53.tar.gz
make -- NOT OK
'YAML' not installed, will not store persistent state
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Use homebrew to install cpanm:
brew install cpanm
Then you can install JSON with
sudo cpanm install JSON
The output said that make didn't return success. Probably due to some dependency.
Try using cpanm http://search.cpan.org/~miyagawa/App-cpanminus-1.5017/bin/cpanm, it's really hassle free and bootstrapped quite well (no need to install other stuff).
Install using this:
curl -L http://cpanmin.us | perl - --sudo App::cpanminus
cpan install JSON Having the JSON in all caps made it work for me.
I know this is an old topic, but wanted to share my solution after finding that I needed JSON when trying to use zap2xml (perl based). I was getting the error: "Can't locate JSON.pm in #INC..." after installing perl via Homebrew.
This is how I installed JSON via Homebrew. I will also include the steps required to install Homebrew (for those who would like to know). ;)
Prerequisites:
Install Xcode from the App Store (Download):
https://itunes.apple.com/us/app/xcode/id497799835
Install Command Line Tools for Xcode (Run in Terminal):
xcode-select --install
Install Homebrew (Run in Terminal):
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Update Homebrew (Run in Terminal):
brew update
brew upgrade
brew doctor (correct issues found by brew doctor. Instructions will be given by The Doctor. :P)
Install cpanminus (Run in Terminal):
brew install cpanm
Check perl (Run in Terminal):
which perl
perl -V (with a capital -V)
Check/Install JSON module (Run in Terminal):
sudo cpanm -v JSON
DONE.
Following worked for me:
Run on terminal:
sudo perl -MCPAN -e shell
you should get the cpan shell prompt and run below commond at cpan shell:
cpan[1]> install JSON
Regards,
Anand Choubey
this way is OK, Follows the Command:sudo apt-get install libjson-perl
Related
I am trying to make a regex search on a pdf file on Mac.
For that, I'm trying to install pdfgrep. I have cloned the repository, but I'm not sure how to install it.
On the README, it says to
use the standard procedure:
./configure
make
sudo make install
,but just running these commands doesn't make the installation.
Can anyone help me?
use brew install pdfgrep or install macports and run port install pdfgrep
running brew install pdfgrep worked for me :)
If you want to use the regular expression (PCRE) option, please use brew install pdfgrep --with-pcre. Or brew reinstall pdfgrep --with-pcre if you already installed pdfgrep.
I want create an automated script to use on a post installation.
For this reason i want use brew and cask to make it all.
So, i think that my script should start with that to install brew:
echo << "Installing homebrew..."
if test ! $(which brew); then
echo "Homebrew not found, Installing..."
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
fi
Then i need to install some useful stuff as i see here:
http://lapwinglabs.com/blog/hacker-guide-to-setting-up-your-mac
So i put this too on my script:
# Install GNU core utilities (those that come with OS X are outdated)
brew install coreutils
# Install GNU `find`, `locate`, `updatedb`, and `xargs`, g-prefixed
brew install findutils
# Install Bash 4
brew install bash
# Install more recent versions of some OS X tools
brew tap homebrew/dupes
brew install homebrew/dupes/grep
$PATH=$(brew --prefix coreutils)/libexec/gnubin:$PATH
After that, the guide on the link says to install all the apps with cask and clean.
Here is my question.
I wish install and can update them in future using the classical Application folder of mac
How i can do that?
Maybe i should put this line:
export HOMEBREW_CASK_OPTS="--appdir=/Applications --caskroom=/usr/local/Caskroom"
Before all the commands to install the apps? May it works? (I have found this line here around)
If this line is correct can I update my apps using a brew/cask command?
Sorry for the dumbs questions, I've just discovered brew and cask yesterday :)
Any suggestion or example for this script is well accepted :)
brew cask install <formula> is supposed to symlink your app in Applications automatically.
I installed lua on my OSX 10.10 machine using brew install lua. The version that got installed was 5.2.4. LuaRocks was installed along with the lua package. But when i run luarocks install <package_name> i get Error: ##HOMEBREW_PREFIX## does not exist and your user does not have write permissions in. i tried using sudo luarocks install <package_name> as well, but it gives the same error. How to fix this ?
Please Help.
Thanks
This was a bug in the way we relocate text files to ensure wider bottle portability for non-/usr/local users.
It was resolved a couple of weeks back, July 31st I believe. Presuming your Homebrew is in a standard location, if you do:
rm /usr/local/etc/luarocks52/config-5.2.lua && brew update && brew reinstall lua
The problem should be resolved now. Apologies!
I had the same problem when using the luarocks when installed with homebrew, try installing luarocks again like this:
$ wget http://luarocks.org/releases/luarocks-2.2.1.tar.gz
$ tar zxpf luarocks-2.2.1.tar.gz
$ cd luarocks-2.2.1
$ ./configure; sudo make bootstrap
I took this code snippet from here: https://luarocks.org/
I managed to install all the modules that I required without problems after doing this.
I tried to install GNU Octave on my Mac using Fink by this instruction
http://wiki.octave.org/Octave_for_MacOS_X
I think I have followed all the instructions but I can't run Octave.
How can I check if it is installed correctly?
I tried typing 'octave' in the terminal but it says 'command not found'
Or, is there any easy instruction for Octave installation?
I've found many install guides but they are all different and assumes some knowledge.
Incidentally, I have installed Octave GNU today twice on two different machines (both running Lion).
I needed the latest version of Octave (3.6.4), and used Homebrew.
I already had XCode installed, so the rest:
Install Homebrew
Based on the instructions in this page, I ran:
ruby -e "$(curl -fsSL https://raw.github.com/mxcl/homebrew/go)"
Install Octave
Following this guide, I ran:
brew tap homebrew/science
brew update && brew upgrade
brew install gfortran
brew install octave
Install AquaTerm
Notice that you need this before you install gnuplot (or gnuplot won't see aqua as a valid terminal and you may get 'unknown or ambiguous terminal type' error).
Simply downloaded the latest version (1.1.0) dmg from SourceForge.
Install gnuplot
brew install gnuplot
You could try installing it with Home Brew. Once you download and install Home Brew, use this guide to get Octave installed.
Easiest option would be using the precompilled .app
I've tried the precompiled .app, but had issues with certain functions (like sound),
whereas the macports version always worked.
I usually install it using macports:
sudo port install octave
for the basics.
You might need other port variants/octave modules installed:
sudo port install octave octave-signal octave-plot octave-image octave-signal
Need to have XCode with Command Line Tools first and Macports with this route though
How to know if a Fink package is installed
By default (and this should be your case too if you didn't changed it), Fink installs everything under /sw, i.e. the binaries you are looking for should be in /sw/bin/.
Run ls /sw/bin/octave*and, depending on the output, you then have two choices :
Either the Octave binary is inside /sw/bin, in that case run echo $PATH and learn more about PATH Variable to fix your problem.
Otherwise, if there is nothing inside, there might have been a problem with the install. Try running fink install octave once more, look closely at the output and update your post if necessary.
This is simply an update on the instruction provided by Izhaki (that I ran on Mac OSX 10.8.4).
You may be required to update XCode to 4.6.3. This can be done through the AppStore.
If you encounter the error:
Error: Download failed: http://threadingbuildingblocks.org/sites/default/files/software_releases/source/tbb41_20130613oss_src.tgz
during
brew install octave
Then invoke:
brew update
brew install octave
and the install will pick up where it left off. Other than that, the instruction worked seamlessly.
I tried to install Apache Ant on my Mac and I followed the next steps :
I downloaded apache-ant-1.8.1-bin.tar.gz into my Downloads folder.
I moved the file to /usr/local/ using this commands : sudo sh and mv apache-ant-1.8.1-bin.tar.gz /usr/local/
Now I want to use cd /usr/local/ but it's not working, I get back "No such file or directory".
Then I used cd /usr/ and ls commands and it seems that the local folder is there. If I try to access it I get the same error.
Since I already used sudo su why I can't access it? Any ideas?
Ant is already installed on some older versions of Mac OS X, so you should run ant -version to test if it is installed before attempting to install it.
If it is not already installed, then your best bet is to install Homebrew (brew install ant) or MacPorts (sudo port install apache-ant), and use those tools to install Apache Ant.
Alternatively, though I would highly advise using Homebrew or MacPorts instead, you can install Apache Ant manually. To do so, you would need to:
Decompress the .tar.gz file.
Optionally put it somewhere.
Put the "bin" subdirectory in your path.
The commands that you would need, assuming apache-ant-1.8.1-bin.tar.gz (replace 1.8.1 with the actual version) were still in your Downloads directory, would be the following (explanatory comments included):
cd ~/Downloads # Let's get into your downloads folder.
tar -xvzf apache-ant-1.8.1-bin.tar.gz # Extract the folder
sudo mkdir -p /usr/local # Ensure that /usr/local exists
sudo cp -rf apache-ant-1.8.1-bin /usr/local/apache-ant # Copy it into /usr/local
# Add the new version of Ant to current terminal session
export PATH=/usr/local/apache-ant/bin:"$PATH"
# Add the new version of Ant to future terminal sessions
echo 'export PATH=/usr/local/apache-ant/bin:"$PATH"' >> ~/.profile
# Verify new version of ant
ant -version
For MacOS Maveriks (10.9 and perhaps later versions too), Apache Ant does not come bundled with the operating system and so must be installed manually. You can use brew to easily install ant. Simply execute the following command in a terminal window to install brew:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
It's a medium sized download which took me 10min to download and install. Just follow the process which involves installing various components. If you already have brew installed, make sure it's up to date by executing:
brew update
Once installed you can simply type:
brew install ant
Ant is now installed and available through the "ant" command in the terminal.
To test the installation, just type "ant -version" into a terminal window. You should get the following output:
Apache Ant(TM) version X.X.X compiled on MONTH DAY YEAR
Source: Error executing command 'ant' on Mac OS X 10.9 Mavericks when building for Android with PhoneGap/Cordova
If you are getting errors installing Brew, try uninstalling first using the command:
rm -rf /usr/local/Cellar /usr/local/.git && brew cleanup
Thanks to OrangeDog and other users for providing additional information.
If you have MacPorts installed (https://www.macports.org/), do this:
sudo port install apache-ant
If you're a homebrew user instead of macports, homebrew has an ant recipe.
brew install ant
To get Ant running on your Mac in 5 minutes, follow these steps.
Open up your terminal.
Perform these commands in order:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
brew install ant
If you don't have Java installed yet, you will get the following error: "Error: An unsatisfied requirement failed this build."
Run this command next: brew cask install java to fix this.
The installation will resume.
Check your version of by running this command:
ant -version
And you're ready to go!
Use Brew is always good way to install ANT and other needs.
To install type below command on terminal.
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
after Brew installation , type
brew install ant
This will install Ant on your system. Also you will not need to worry about setting up the path.
Also i have documented on the same - How to Install ANT on Mac OS?
The only way i could get my ant version updated on the mac from 1.8.2 to 1.9.1 was by following instructions here
http://wiki.eclipse.org/Ant/User_Guide
MacPorts will install ant for you in MacOSX 10.9. Just use
$ sudo port install apache-ant
and it will install.