I have a ruby file airplane.rb
with a ruby class like so -
class AirplaneSeat
attr_accessor :seat_row, :seat_column, :type, :order, :assigned_passenger
def initialize(seat_row, seat_column, type, order, assigned_passenger = 0)
#seat_row = seat_row
#seat_column = seat_column
#type = type
#order = order
#assigned_passenger = assigned_passenger
end
def get_passenger_seating
#some code
end
end # end of class
# outside the class
begin
puts "Enter the seating matrix as 2D array"
seat_matrix = JSON.parse gets.chomp
puts "Enter the number of passengers"
no_of_passengers = gets.chomp
raise "Please enter a valid passenger count" if (no_of_passengers.empty? || no_of_passengers.to_i <=0)
AirplaneSeat.get_passenger_seating(seat_matrix, no_of_passengers)
rescue Exception => e
puts "Error encountered -> #{e.message}"
end
So the ruby class has a few methods and couple of lines of code to execute outside the class, which takes input from the user and then calls the class method.
How do I go about writing test cases for this? I have the rspecs gem and spec folder setup done.
I don't really understand how to begin with the test cases.
Any pointers greatly appreciated.
Thanks!
As a simple example say we have our file for a Foo class, foo.rb:
class Foo
def call
'bar'
end
end
We can create a spec, foo_spec.rb:
require 'rspec'
require_relative 'foo'
RSpec.describe Foo do
describe '#call' do
it 'works' do
expect(described_class.new.call).to eq 'Bar'
end
end
end
And then from the command line we can run the spec:
$ rspec foo_spec.rb
I have the following tests, written using RSpec
spec/services/aquatic/factory_spec.rb
describe Hobby::Aquatic::Factory do
let(:factory) { Hobby::Aquatic::Factory.instance }
describe "singleton" do
it "should be the same object" do
Hobby::Aquatic::Factory.instance.should be factory
end
it "raise error if given junk" do
expect {factory.hobby("junk")}.to raise_error
end
end
end
spec/services/aquatic/hobbies_spec.rb
describe Hobby::Aquatic do
it "creates fishing" do
expect { Hobby::Aquatic::Fishing.new }.to_not raise_error
end
end
and have defined the following module / classes
app/services/aquatic/factory.rb
require 'singleton'
module Hobby
module Aquatic
class Factory
include Singleton
def self.instance
##instance ||= new
end
def hobby(name)
return Fishing.new if name == "fishing"
return Surfing.new if name == "surfing"
raise ArgumentError, "Unknown hobby for supplied name"
end
end
end
end
app/services/aquatic/hobbies.rb
module Hobby
module Aquatic
class Fishing
end
class Surfing
end
end
end
When I run the tests the Factory tests all pass fine, but the test of the Hobby::Aquatic::Fishing object results in:
Failure/Error: expect { Hobby::Aquatic::Fishing.new }.to_not raise_error
expected no Exception, got #<NameError: uninitialized constant Hobby::Aquatic::Fishing> …
What have I done wrong?
add require_relative 'hobbies' below require 'singleton' to fix this.
I am not sure why Rails is loading the factory but not the hobbies automagically but this works.
Say I make a class with a method in it.
class A
def test
puts 'test'
end
end
I want to know what goes on inside of test. I want to literally output:
def test
puts 'test'
end
Is there any way to output the source of a method in a string?
You can use Pry to view methods
# myfile.rb
require 'pry'
class A
def test
return 'test'
end
end
puts Pry::Method(A.new.method(:test)).source #(1)
# or as suggested in the comments
puts Pry::Method.from_str("A#test").source #(2)
# uses less cpu cycles than #(1) because it does not call initialize - see comments
puts Pry::Method(A.allocate.method(:test)).source #(3)
# does not use memory to allocate class as #(1) and #(3) do
puts Pry::Method(A.instance_method(:test)).source #(4)
Then run ruby myfile.rb and you will see:
def test
return 'test'
end
Is there some clean and elegant way to execute my code right after a failed assert in ruby unit tests in Test::Unit, before teardown gets executed?
I am doing some automated GUI testing and would like to take a screenshot right after something failed.
If you're on 1.9, don't use Test::Unit::TestCase as your base class. Subclass it and override #run_test to rescue, take the screenshot and reraise:
class MyAbstractTestCase < Test::Unit::TestCase
def run_test( *args )
super(*args)
rescue
snapshot()
raise
end
end
Alternatively, and I think this is actually the most terse way in, you can use a before_teardown hook:
class MyTestCase < Test::Unit::TestCase
add_teardown_hook do |tc|
screenshot() unless tc.passed?
end
end
This won't work on 1.8's test/unit, but will with the minitest in 1.9.
Well you could extend Test::Unit::Assertions to do what you like, i do not think there is a built-in way to do this. Perhaps something like this (quick & dirty):
require 'test/unit'
module Test::Unit::Assertions
def safe_assert(test, msg=nil)
passed = msg.nil? ? assert(test) : assert(test,msg)
ensure
puts 'take screenshot' unless passed
end
end
class MyTest < Test::Unit::TestCase
def setup
puts 'setup'
end
def teardown
puts 'teardown'
end
def test_something
safe_assert true
puts 'before failing assert'
safe_assert false, "message"
puts 'after failing assert'
end
end
output:
Loaded suite unittest
Started
setup
before failing assert
take screenshot
teardown
F
Finished in 0.001094 seconds.
1) Failure:
test_something(MyTest) [unittest.rb:5]:
message
1 tests, 2 assertions, 1 failures, 0 errors, 0 skips
Test run options: --seed 58428
EDIT: you could actually pass the args to assert in a simpler way:
module Test::Unit::Assertions
def safe_assert(*args)
passed = assert(*args)
ensure
puts 'take screenshot' unless passed
end
end
also, you could wrap a standard assertin a begin-ensure-end block if you only need this functionality infrequently:
class MyTest < Test::Unit::TestCase
def test_something
safe_assert true
puts 'before failing assert'
begin
passed = assert false, "message"
ensure
puts 'take screenshot' unless passed
end
puts 'after failing assert'
end
end
or you build a method that ensures a screenshot like in the following example. This actually seems like the cleanest way to me:
def screenshot_on_fail
passed = yield
ensure
puts 'take screenshot' unless passed
end
class MyTest < Test::Unit::TestCase
def test_something_else
screenshot_on_fail do
assert true
end
screenshot_on_fail do
assert false, 'message'
end
end
end
I'm struggling with Test::Unit. When I think of unit tests, I think of one simple test per file. But in Ruby's framework, I must instead write:
class MyTest < Test::Unit::TestCase
def setup
end
def test_1
end
def test_1
end
end
But setup and teardown run for every invocation of a test_* method. This is exactly what I don't want. Rather, I want a setup method that runs just once for the whole class. But I can't seem to write my own initialize() without breaking TestCase's initialize.
Is that possible? Or am I making this hopelessly complicated?
As mentioned in Hal Fulton's book "The Ruby Way".
He overrides the self.suite method of Test::Unit which allows the test cases in a class to run as a suite.
def self.suite
mysuite = super
def mysuite.run(*args)
MyTest.startup()
super
MyTest.shutdown()
end
mysuite
end
Here is an example:
class MyTest < Test::Unit::TestCase
class << self
def startup
puts 'runs only once at start'
end
def shutdown
puts 'runs only once at end'
end
def suite
mysuite = super
def mysuite.run(*args)
MyTest.startup()
super
MyTest.shutdown()
end
mysuite
end
end
def setup
puts 'runs before each test'
end
def teardown
puts 'runs after each test'
end
def test_stuff
assert(true)
end
end
FINALLY, test-unit has this implemented! Woot!
If you are using v 2.5.2 or later, you can just use this:
Test::Unit.at_start do
# initialization stuff here
end
This will run once when you start your tests off. There are also callbacks which run at the beginning of each test case (startup), in addition to the ones that run before every test (setup).
http://test-unit.rubyforge.org/test-unit/en/Test/Unit.html#at_start-class_method
That's how it's supposed to work!
Each test should be completely isolated from the rest, so the setup and tear_down methods are executed once for every test-case. There are cases, however, when you might want more control over the execution flow. Then you can group the test-cases in suites.
In your case you could write something like the following:
require 'test/unit'
require 'test/unit/ui/console/testrunner'
class TestDecorator < Test::Unit::TestSuite
def initialize(test_case_class)
super
self << test_case_class.suite
end
def run(result, &progress_block)
setup_suite
begin
super(result, &progress_block)
ensure
tear_down_suite
end
end
end
class MyTestCase < Test::Unit::TestCase
def test_1
puts "test_1"
assert_equal(1, 1)
end
def test_2
puts "test_2"
assert_equal(2, 2)
end
end
class MySuite < TestDecorator
def setup_suite
puts "setup_suite"
end
def tear_down_suite
puts "tear_down_suite"
end
end
Test::Unit::UI::Console::TestRunner.run(MySuite.new(MyTestCase))
The TestDecorator defines a special suite which provides a setup and tear_down method which run only once before and after the running of the set of test-cases it contains.
The drawback of this is that you need to tell Test::Unit how to run the tests in the unit. In the event your unit contains many test-cases and you need a decorator for only one of them you'll need something like this:
require 'test/unit'
require 'test/unit/ui/console/testrunner'
class TestDecorator < Test::Unit::TestSuite
def initialize(test_case_class)
super
self << test_case_class.suite
end
def run(result, &progress_block)
setup_suite
begin
super(result, &progress_block)
ensure
tear_down_suite
end
end
end
class MyTestCase < Test::Unit::TestCase
def test_1
puts "test_1"
assert_equal(1, 1)
end
def test_2
puts "test_2"
assert_equal(2, 2)
end
end
class MySuite < TestDecorator
def setup_suite
puts "setup_suite"
end
def tear_down_suite
puts "tear_down_suite"
end
end
class AnotherTestCase < Test::Unit::TestCase
def test_a
puts "test_a"
assert_equal("a", "a")
end
end
class Tests
def self.suite
suite = Test::Unit::TestSuite.new
suite << MySuite.new(MyTestCase)
suite << AnotherTestCase.suite
suite
end
end
Test::Unit::UI::Console::TestRunner.run(Tests.suite)
The Test::Unit documentation documentation provides a good explanation on how suites work.
Well, I accomplished basically the same way in a really ugly and horrible fashion, but it was quicker. :) Once I realized that the tests are run alphabetically:
class MyTests < Test::Unit::TestCase
def test_AASetup # I have a few tests that start with "A", but I doubt any will start with "Aardvark" or "Aargh!"
#Run setup code
end
def MoreTests
end
def test_ZTeardown
#Run teardown code
end
It aint pretty, but it works :)
To solve this problem I used the setup construct, with only one test method followed. This one testmethod is calling all other tests.
For instance
class TC_001 << Test::Unit::TestCase
def setup
# do stuff once
end
def testSuite
falseArguments()
arguments()
end
def falseArguments
# do stuff
end
def arguments
# do stuff
end
end
I know this is quite an old post, but I had the issue (and had already written classes using Tes/unit) and ave answered using another method, so if it can help...
If you only need the equivalent of the startup function, you can use the class variables:
class MyTest < Test::Unit::TestCase
##cmptr = nil
def setup
if ##cmptr.nil?
##cmptr = 0
puts "runs at first test only"
##var_shared_between_fcs = "value"
end
puts 'runs before each test'
end
def test_stuff
assert(true)
end
end
I came across this exact problem and created a subclass of Test::Unit::TestCase for doing exactly what you describe.
Here's what I came up with. It provides it's own setup and teardown methods that count the number of methods in the class that begin with 'test'. On the first call to setup it calls global_setup and on the last call to teardown it calls global_teardown
class ImprovedUnitTestCase < Test::Unit::TestCase
cattr_accessor :expected_test_count
def self.global_setup; end
def self.global_teardown; end
def teardown
if((self.class.expected_test_count-=1) == 0)
self.class.global_teardown
end
end
def setup
cls = self.class
if(not cls.expected_test_count)
cls.expected_test_count = (cls.instance_methods.reject{|method| method[0..3] != 'test'}).length
cls.global_setup
end
end
end
Create your test cases like this:
class TestSomething < ImprovedUnitTestCase
def self.global_setup
puts 'global_setup is only run once at the beginning'
end
def self.global_teardown
puts 'global_teardown is only run once at the end'
end
def test_1
end
def test_2
end
end
The fault in this is that you can't provide your own per-test setup and teardown methods unless you use the setup :method_name class method (only available in Rails 2.X?) and if you have a test suite or something that only runs one of the test methods, then the global_teardown won't be called because it assumes that all the test methods will be run eventually.
Use the TestSuite as #romulo-a-ceccon described for special preparations for each test suite.
However I think it should be mentioned here that Unit tests are ment to run in total isolation. Thus the execution flow is setup-test-teardown which should guarantee that each test run undisturbed by anything the other tests did.
I created a mixin called SetupOnce. Here's an example of using it.
require 'test/unit'
require 'setuponce'
class MyTest < Test::Unit::TestCase
include SetupOnce
def self.setup_once
puts "doing one-time setup"
end
def self.teardown_once
puts "doing one-time teardown"
end
end
And here is the actual code; notice it requires another module available from the first link in the footnotes.
require 'mixin_class_methods' # see footnote 1
module SetupOnce
mixin_class_methods
define_class_methods do
def setup_once; end
def teardown_once; end
def suite
mySuite = super
def mySuite.run(*args)
#name.to_class.setup_once
super(*args)
#name.to_class.teardown_once
end
return mySuite
end
end
end
# See footnote 2
class String
def to_class
split('::').inject(Kernel) {
|scope, const_name|
scope.const_get(const_name)
}
end
end
Footnotes:
http://redcorundum.blogspot.com/2006/06/mixing-in-class-methods.html
http://infovore.org/archives/2006/08/02/getting-a-class-object-in-ruby-from-a-string-containing-that-classes-name/
+1 for the RSpec answer above by #orion-edwards. I would have commented on his answer, but I don't have enough reputation yet to comment on answers.
I use test/unit and RSpec a lot and I have to say ... the code that everyone has been posting is missing a very important feature of before(:all) which is: #instance variable support.
In RSpec, you can do:
describe 'Whatever' do
before :all do
#foo = 'foo'
end
# This will pass
it 'first' do
assert_equal 'foo', #foo
#foo = 'different'
assert_equal 'different', #foo
end
# This will pass, even though the previous test changed the
# value of #foo. This is because RSpec stores the values of
# all instance variables created by before(:all) and copies
# them into your test's scope before each test runs.
it 'second' do
assert_equal 'foo', #foo
#foo = 'different'
assert_equal 'different', #foo
end
end
The implementations of #startup and #shutdown above all focus on making sure that these methods only get called once for the entire TestCase class, but any instance variables used in these methods would be lost!
RSpec runs its before(:all) in its own instance of Object and all of the local variables are copied before each test is run.
To access any variables that are created during a global #startup method, you would need to either:
copy all of the instance variables created by #startup, like RSpec does
define your variables in #startup into a scope that you can access from your test methods, eg. ##class_variables or create class-level attr_accessors that provide access to the #instance_variables that you create inside of def self.startup
Just my $0.02!