I am learning Ruby, and in the book I use, there is an example code like this
#...
restaurant = Restaurant.new
restaurant.name = "Mediterrano"
restaurant.description = <<DESC
One of the best Italian restaurants in the Kings Cross area,
Mediterraneo will never leave you disappointed
DESC
#...
Can someone explain to me what <<DESC means in the above example? How does it differ from the common string double quote?
It is used to create multiline strings. Basically, '<< DESC' tells ruby to consider everything that follows until the next 'DESC' keyword. 'DESC' is not mandatory, as it can be replaced with anything else.
a = <<STRING
Here
is
a
multiline
string
STRING
The << operator is followed by an identifier that marks the end of the document. The end mark is called the terminator. The lines of text prior to the terminator are joined together, including the newlines and any other whitespace.
http://en.wikibooks.org/wiki/Ruby_Programming/Here_documents
It allows the creation of multi-line string constants in a readable way. See http://en.wikibooks.org/wiki/Ruby_Programming/Here_documents.
It is called a heredoc, or heredocument. It allows you to write multiline. You can test it in your terminal!
Related
I'm struggling to figure out even where to start with this. I believe there is a regular expression to make this a fairly straight forward task. I want to trim off the extra asterisks in a string.
Example string:
test="AM*BE*3***LAST****~"
I would like it to trim asterisks off only the end that don't have repeating symbols. So the resulting value in the variable would be:
test="AM*BE*3***LAST~"
In Perl I was able to use this:
s/\*+~+/~/;
Is there something similar I can do in Ruby? I'm sure there is, just struggling to find it for some reason. Any help would be greatly appreciated.
You could use this regex:
/\*+~$/
Then use the gsub method to replace all matches with a tilde ~:
test = "AM*BE*3***LAST****~"
test.gsub!(/\*+~$/, '~')
# => "AM*BE*3***LAST~"
Or you could use this more flexible regex, which matches any amount of characters after * until end of line:
/\*+([^*])+$/
Then use the first capture group ($1) as the replacement:
test.gsub(/\*+([^*])+$/) { $1 }
Ruby's String class has the [] method, which lets us use regexp as a parameter. We can also assign to that, allowing us to do things like:
foo = "AM*BE*3***LAST****~"
foo[/\*+~+$/] = '~'
foo # => "AM*BE*3***LAST~"
That reuses the match pattern from your Perl search/replace. (I'm assuming you only want to match at the end of the line because of your examples. If it needs to be anywhere in the string remove the trailing $ from the pattern.)
You can use Rubular and try to test the regex and achieve what you need based on the references down the page.
http://rubular.com/
I'm too ambitious or is there a way do this
to add a string if not present ?
and
remove a the same string if present?
Do all of this using Regex and avoid the if else statement
Here an example
I have string
"admin,artist,location_manager,event_manager"
so can the substring location_manager be added or removed with regards to above conditions
basically I'm looking to avoid the if else statement and do all of this plainly in regex
"admin,artist,location_manager,event_manager".test(/some_regex/)
The some_regex will remove location_manager from the string if present else it will add it
Am I over over ambitions
You will need to use some sort of logic.
str += ',location_manager' unless str.gsub!(/location_manager,/,'')
I'm assuming that if it's not present you append it to the end of the string
Regex will not actually add or remove anything in any language that I am aware of. It is simply used to match. You must use some other language construct (a regex based replacement function for example) to achieve this functionality. It would probably help to mention your specific language so as to get help from those users.
Here's one kinda off-the-wall solution. It doesn't use regexes, but it also doesn't use any if/else statements either. It's more academic than production-worthy.
Assumptions: Your string is a comma-separated list of titles, and that these are a unique set (no duplicates), and that order doesn't matter:
titles = Set.new(str.split(','))
#=> #<Set: {"admin", "artist", "location_manager", "event_manager"}>
titles_to_toggle = ["location_manager"]
#=> ["location_manager"]
titles ^= titles_to_toggle
#=> #<Set: {"admin", "artist", "event_manager"}>
titles ^= titles_to_toggle
#=> #<Set: {"location_manager", "admin", "artist", "event_manager"}>
titles.to_a.join(",")
#=> "location_manager,admin,artist,event_manager"
All this assumes that you're using a string as a kind of set. If so, you should probably just use a set. If not, and you actually need string-manipulation functions to operate on it, there's probably no way around except for using if-else, or a variant, such as the ternary operator, or unless, or Bergi's answer
Also worth noting regarding regex as a solution: Make sure you consider the edge cases. If 'location_manager' is in the middle of the string, will you remove the extraneous comma? Will you handle removing commas correctly if it's at the beginning or the end of the string? Will you correctly add commas when it's added? For these reasons treating a set as a set or array instead of a string makes more sense.
No. Regex can only match/test whether "a string" is present (or not). Then, the function you've used can do something based on that result, for example replace can remove a match.
Yet, you want to do two actions (each can be done with regex), remove if present and add if not. You can't execute them sequentially, because they overlap - you need to execute either the one or the other. This is where if-else structures (or ternary operators) come into play, and they are required if there is no library/native function that contains them to do exactly this job. I doubt there is one in Ruby.
If you want to avoid the if-else-statement (for one-liners or expressions), you can use the ternary operator. Or, you can use a labda expression returning the correct value:
# kind of pseudo code
string.replace(/location,?|$/, function($0) return $0 ? "" : ",location" )
This matches the string "location" (with optional comma) or the string end, and replaces that with nothing if a match was found or the string ",location" otherwise. I'm sure you can adapt this to Ruby.
to remove something matching a pattern is really easy:
(admin,?|artist,?|location_manager,?|event_manager,?)
then choose the string to replace the match -in your case an empty string- and pass everything to the replace method.
The other operation you suggested was more difficult to achieve with regex only. Maybe someone knows a better answer
I want to transform the following text
This is a , here is another 
into
This is a , here is another 
In other words I want to find all the image paths that are enclosed between brackets (the text is in Markdown syntax) and replace them with other paths. The string containing the new path is returned by a separate real_path function.
I would like to do this using String#gsub in its block version. Currently my code looks like this:
re = /!\[.*?\]\((.*?)\)/
rel_content = content.gsub(re) do |path|
real_path(path)
end
The problem with this regex is that it will match  instead of just foto.jpeg. I also tried other regexen like (?>\!\[.*?\]\()(.*?)(?>\)) but to no avail.
My current workaround is to split the path and reassemble it later.
Is there a Ruby regex that matches only the path inside the brackets and not all the contextual required characters?
Post-answers update: The main problem here is that Ruby's regexen have no way to specify zero-width lookbehinds. The most generic solution is to group what the part of regexp before and the one after the real matching part, i.e. /(pre)(matching-part)(post)/, and reconstruct the full string afterwards.
In this case the solution would be
re = /(!\[.*?\]\()(.*?)(\))/
rel_content = content.gsub(re) do
$1 + real_path($2) + $3
end
A quick solution (adjust as necessary):
s = 'This is a '
s.sub!(/!(\[.*?\])\((.*?)\)/, '\1(/folder1/\2)' )
p s # This is a [foto](/folder1/foto.jpeg)
You can always do it in two steps - first extract the whole image expression out and then second replace the link:
str = "This is a , here is another "
str.gsub(/\!\[[^\]]*\]\(([^)]*)\)/) do |image|
image.gsub(/(?<=\()(.*)(?=\))/) do |link|
"/a/new/path/" + link
end
end
#=> "This is a , here is another "
I changed the first regex a bit, but you can use the same one you had before in its place. image is the image expression like , and link is just the path like foto.jpeg.
[EDIT] Clarification: Ruby does have lookbehinds (and they are used in my answer):
You can create lookbehinds with (?<=regex) for positive and (?<!regex) for negative, where regex is an arbitrary regex expression subject to the following condition. Regexp expressions in lookbehinds they have to be fixed width due to limitations on the regex implementation, which means that they can't include expressions with an unknown number of repetitions or alternations with different-width choices. If you try to do that, you'll get an error. (The restriction doesn't apply to lookaheads though).
In your case, the [foto] part has a variable width (foto can be any string) so it can't go into a lookbehind due to the above. However, lookbehind is exactly what we need since it's a zero-width match, and we take advantage of that in the second regex which only needs to worry about (fixed-length) compulsory open parentheses.
Obviously you can put real_path in from here, but I just wanted a test-able example.
I think that this approach is more flexible and more readable than reconstructing the string through the match group variables
In your block, use $1 to access the first capture group ($2 for the second and so on).
From the documentation:
In the block form, the current match string is passed in as a parameter, and variables such as $1, $2, $`, $&, and $' will be set appropriately. The value returned by the block will be substituted for the match on each call.
As a side note, some people think '\1' inappropriate for situations where an unconfirmed number of characters are matched. For example, if you want to match and modify the middle content, how can you protect the characters on both sides?
It's easy. Put a bracket around something else.
For example, I hope replace a-ruby-porgramming-book-531070.png to a-ruby-porgramming-book.png. Remove context between last "-" and last ".".
I can use /.*(-.*?)\./ match -531070. Now how should I replace it? Notice
everything else does not have a definite format.
The answer is to put brackets around something else, then protect them:
"a-ruby-porgramming-book-531070.png".sub(/(.*)(-.*?)\./, '\1.')
# => "a-ruby-porgramming-book.png"
If you want add something before matched content, you can use:
"a-ruby-porgramming-book-531070.png".sub(/(.*)(-.*?)\./, '\1-2019\2.')
# => "a-ruby-porgramming-book-2019-531070.png"
In Ruby I have an arbitrary string, and I'd like to convert it to something that is a valid Unix/Linux filename. It doesn't matter what it looks like in its final form, as long as it is visually recognizable as the string it started as. Some possible examples:
"Here's my string!" => "Heres_my_string"
"* is an asterisk, you see" => "is_an_asterisk_you_see"
Is there anything built-in (maybe in the file libraries) that will accomplish this (or close to this)?
By your specifications, you could accomplish this with a regex replacement. This regex will match all characters other than basic letters and digits:
s/[^\w\s_-]+//g
This will remove any extra whitespace in between words, as shown in your examples:
s/(^|\b\s)\s+($|\s?\b)/\\1\\2/g
And lastly, replace the remaining spaces with underscores:
s/\s+/_/g
Here it is in Ruby:
def friendly_filename(filename)
filename.gsub(/[^\w\s_-]+/, '')
.gsub(/(^|\b\s)\s+($|\s?\b)/, '\\1\\2')
.gsub(/\s+/, '_')
end
First, I see that it was asked purely in ruby, and second that it's not the same purpose (*nix filename compatible), but if you are using Rails, there is a method called parameterize that should help.
In rails console:
"Here's my string!".parameterize => "here-s-my-string"
"* is an asterisk, you see".parameterize => "is-an-asterisk-you-see"
I think that parameterize, as being compliant with URL specifications, may work as well with filenames :)
You can see more about here:
http://api.rubyonrails.org/classes/ActiveSupport/Inflector.html#method-i-parameterize
There's also a whole lot of another helpful methods.
How do I convert strings like "this is an example" to "this-is-an-example" under ruby?
The simplest version:
"this is an example".tr(" ", "-")
#=> "this-is-an-example"
You could also do something like this, which is slightly more robust and easier to extend by updating the regular expression:
"this is an example".gsub(/\s+/, "-")
#=> "this-is-an-example"
The above will replace all chunks of white space (any combination of multiple spaces, tabs, newlines) to a single dash.
See the String class reference for more details about the methods that can be used to manipulate strings in Ruby.
If you are trying to generate a string that can be used in a URL, you should also consider stripping other non-alphanumeric characters (especially the ones that have special meaning in URLs), or replacing them with an alphanumeric equivalent (example, as suggested by Rob Cameron in his answer).
If you are trying to make something that is a good URL slug, there are lots of ways to do it.
Generally, you want to remove everything that is not a letter or number, and then replace all whitespace characters with dashes.
So:
s = "this is an 'example'"
s = s.gsub(/\W+/, ' ').strip
s = s.gsub(/\s+/,'-')
At the end s will equal "this-is-an-example"
I used the source code from a ruby testing library called contest to get this particular way to do it.
If you're using Rails take a look at parameterize(), it does exactly what you're looking for:
http://api.rubyonrails.org/classes/ActiveSupport/CoreExtensions/String/Inflections.html#M001367
foo = "Hello, world!"
foo.parameterize => 'hello-world'