I have dealt with jslint-maven-plugin getting caught by the infamous "plugin execution not covered by lifecycle configuration" error by adding an ignore action to the pom, as per Eclipsepedia advice.
Works great, if I have the pluginManagement section in the project's pom, or in a parent project pom in my local workspace.
However, it breaks again as if I hadn't applied the fix if the parent is not in my local workspace, despite the effective pom still showing the additional config. The build works fine from the command line, it just seems to be the IDE UI that's not working correctly.
Any ideas why this might be happening and how I could resolve the problem?
Maven 3.0.3 and m2e 1.0.200.
Related
I am transitioning to Maven-Tycho and was dealing with many errors. I seem to have gotten rid of all the errors but when I look into the pom.xml file I see maven-install-plugin, maven-compiler, maven-release plugin, etc and no mentions of tycho like I see in my tutorial. Did I do something wrong how do I make sure that my project is using maven-tycho not maven only.
http://www.vogella.com/tutorials/EclipseTycho/article.html
Any changes can be made in the pom.xml tab. The Effective POM tab is read-only, it just shows what Maven constructs when it parses your project. It's composed of your POM and its (grand)parent POMs. The Effective POM does not exist on your filesystem per se, it's generated on-the-fly whenever your run a Maven build - hence why the view is "read-only". You can change to tycho-compiler by modifying the pom.xml file replace maven-compiler-plugin with tycho-compiler-plugin. Make sure you add tycho to your eclipse environment
I'm working in eclipse and I have a problem that I can't import my personal java libraries.
I created the libraries and 'installed' them into my local maven repo (using mvn install). This created a subdirectory related to the 'version' name that was in the POM file from when I ran the command. Which seemed fine.
So in this directory there where the usual jar files and other stuff.
When I released this file I manually changed the name of the version in the POM. going from 0.0.1-SNAPSHOT to 0.0.1-RELEASE
This seems to have worked as I would have expected.
However I can't seem to find import the new release jar.
Using the maven repositories browser in eclipse I can see that the new artifact is in the 'local' repository.
I try to add the dependency in the following methods:
Select the main project -> Maven -> add dependency.
This adds the dependency details into the pom but with a type value detail of <type>pom.lastUpdated</type>
Select the project pom.xml file -> Maven -> add dependency.
This time the artifact for the 0.0.1-RELEASE is greyed out I can select it, but I guess nothing is actually happening.
The original 0.0.1-SNAPSHOT it selectable, and if I use this I do not have a <type> detail in the pom.
I don't understand why there is a difference in the RELEASE and SNAPSHOT artifacts, as they have both been generated in the same way, and clearly they are both visible in the browser, the contents of the directory on disk are the same. The file names and contents are identical with the exception of the word RELEASE or SNAPSHOT.
I know that I can simply add in the RELEASE jar to my build path, but this seems to be a ridiculous thing to have to do if I intend to use maven (or do I need to do this).
I don't want to use an external repo for storing my artifacts, and I'm not too keen to go to the trouble of installing nexus (or similar) on my local machine (just because I've had trouble with it in the past).
What am I missing so as I can get my maven project to see my local repository and all its artifacts.
Thanks in advance.
David
ps I've already tried things such as mvn dependency:purge-local-repository which definitely pulled in / updated all the local jar dependencies.
So I've managed to work around my problem.
As such this solution is ridiculous, and breaks all the purpose of maven.
So I found (from running maven from the cli) that there was an error in the parent of the project I was attempting to use.
The parent was missing a direct link to the scm plugin (version error).
Once I solved this problem, I then returned to the sub project, and got a lot of errors from missing stuff from the parent.
Essentially it was not 'seeing' all the log4j dependencies.
The solution (well non-solution really).
Add all the log4j dependencies to the sub project.
Edit in SCM and surefire test plugins (as it also started to fail the test code due to missing junit).
So this is great.
I have to define all my dependencies on log4j and in my sub / child project's pom.xml file.
I also need to define them all in my parent's pom.
As it then still refused to run tests in my new project (that used the above as a dependency), and refused to find log4j also. I then decided to add all of these as dependencies for my current project.
Great.
I thought the whole point of maven was I could define my dependency on log4j in my my logging library that I use (which is the dependency), and then it would 'automagically' pull in all the required from this dependency.
Clearly not.
As stated at the start. This is NOT AN ANSWER it is a crazy work around.
My logging library that I use should be able to define its own requirement on a specific log4j version (such as moving from log4j to log4j2), and then when I include this as a maven dependency any change to the required dependency should be seen automatically.
But No : I have to import the dependency on log4j in my other projects also. So now if I had updated my logging library from log4j to log4j2 I would need to go to all my project that use this library and update their pom's to ensure that I have the correct version of log4j.
Seems the whole point of maven has just been lost!
Can someone please tell me where I am going wrong!
David.
In build section of my effective pom there is a Maven plugin that I don't want to use (it was used before, but now I want to remove it).
I removed this plugin from every parent of my project, but is is still applied.
How do I find out where this plugin declaration come from?
UPDATE:
It turns out this plugin was an implicit dependency of another one. It was not declared as such, but referenced from plugin's components.XML leading to runtime dependency injection. The problem was found by pure luck. I think the question is still relevant - it should be possible to find implicit plugin dependencies without wasting a day or two.
Have you run
mvn install
on the parent pom when you deleted the plugin from there?
When you run mvn from submodule it actually looks into your local repository for parent/siblings modules (jars, poms), not to filesystem (compared to maven using the result of the build when you run whole parent project build with submodules).
If it doesn't help, have a look if it's not coming from super pom. You can see super pom on maven website:
http://maven.apache.org/ref/3.0.5/maven-model-builder/super-pom.html
I'm pretty new to troubleshooting Maven problems and need some direction. My project is in eclipse and I'm using the m2eclipse plugin. When i import my project to eclipse all dependencies are resolved and its business as usual. However when i deploy to one of my shared environments the mvn deploy is failing due to "package ... does not exist" exception on some Spring components. I'm also seeing alot of "cannot find symbol" issues.
The first thing i checked was the Settings.xml file I used locally against what the shared environment is using and they are the same.
Any suggestions on what else could be causing the deploy to fail? BTW my POM uses teh repositories tag to specify an additional repository however this doesnt seem to be having any affect on the failing deploy.
Thanks,
org.apache.maven.BuildFailureException: Compilation failure
Caused by: org.apache.maven.plugin.CompilationFailureException: Compilation failure
at org.apache.maven.plugin.AbstractCompilerMojo.execute(AbstractCompilerMojo.java:516)
Most likely your dependencies are using the wrong scope, which causes the libraries not be be included in e.g. the output war file.
As a first step I would confirm that your build passes on the command line and maybe share your pom file here.
so I have started using maven (with eclipse, and a local implementation of Sonatype) not that long ago, after getting through the initial pain I though everything was working.... apparently not !
I have my main project POM and all my child POM (I am using a 'flat' hierarchy, so all the sub projects are in the same folder as the parent POM). This seems to be working OK.
The sub project where all started and 'released' and tested before I started using Maven. I went to maven to solve my 'dependencies' problems... or rather make them more complicated in this instance.
Most of the 'Maven' stuff seems to work fine, but I can't resolve the dependencies of my 'sub projects' that have been released into my local ms/repository
Each day I start up eclipse and have the same problems, I have 'unable to resolve imports' on all my personal libraries, and all those that I use for them (such as Log4j, DDlUtils etc).
I thought the whole point of maven was that I would be able to put in an import declaration for a library, add the 'groupID' and other stuff to the child POM (or parent POM). And then have all the jars downloaded automagically when I run
mvn install
against the parent.
However each day I find I have to re-insert the build path to the libraries (internal and external) via the eclipse workspace and point them to the location of the libraries that I have downloaded as maven can't seem to find them anywhere.
Specifically with running Junit test, I can run them from the workspace (using run as junit) and they all pass fine. But if I try to run them with
mvn test
I get an message saying
java.lang;NoClassDefFoundError: org/junit/Assert
(and this is the same from within eclipse running the mvn test or from CLI)
with an error message in the output of
failed to execute goal org.apache.maven.plugins:maven.surfire-plugin:2.10:test
the POM and jar are in my M2_REPO, and I can find it when I search in sonatype, why can't maven find something that is part of its own system, exists in its repo.
but this obviously works just fine when I run via eclipse and point it to an independently downloaded junit library.
I don't know what extra info you may require, and I'm obviously missing something in either the m2e plugin, my maven install or in sonatype.
please help I'm begining to loose my hair!
and may soon be forced to return to an ant/ivy solution (but don't want to have to learn 'yet another tool' (in this case ivy).
Thanks in advance
David.
ps. i'm on a windows XP platform
edit...
can I get maven to build and release the jar and pom even though it thinks it is failing the tests (which is itn't as I'm doing them manually, and they pass just fine).
If I look in the 'effective POM' tab of my parent POM, the plugin stated above is not in there. I guess this means it is a maven config setting, but where do I add it, and why isn't it automatic when I run my first set of maven tests?
edit 2....
I just found this on the apache plugin comments page (http://maven.apache.org/plugins/maven-surefire-plugin/plugin-info.html), so I ran the code on the CLI, mvn surefire:help -Ddetail=true -Dgoal=test lots of stuff was downloaded, and now the tests run, but they fail within maven ? (remember they pass when run from eclipse using 'run as junit test)... so this is nearly a solution...
It sounds like you need make eclipse aware that the projects in question are Maven projects. You may have POMs set up for your projects, but for the m2e plugin to work you need to have either created the project as a Maven project ('New' -> 'Project...' -> 'Maven' -> 'Maven Project...'), or converted it into a Maven project by right clicking it then selecting 'Configure' -> 'Convert to Maven Project'. You will know that a project has been recognised as a Maven project because there will be a little blue 'M' in the top left of its icon, as shown in the screenshot below:
The main thing to note in the above picture is the 'Maven Dependencies' library. This is set up automatically by the m2e plugin. Whenever you add a dependency to a POM then the project's build path will be configured automatically, although sometimes you may need to force it to do so by right clicking the project and selecting 'Maven' -> 'Update Maven Configuration'. The important thing is that if everything is working then you should never have to update the build path yourself. Moveover, if you do update it yourself then any changes you make will likely get overwritten the next time you run the 'Update Maven Configuration' command.
Also worth noting from the picture is that the two dependencies 'mavenProjectTest' and 'primes' have folder icons next to them. This means that they have been picked up as workspace projects. For this to work the project must have 'workspace resolution' enabled, and the projects to be picked up need to be configured as m2e Maven projects as well.
You mention downloading external libraries. You shouldn't need to download any libraries yourself - by adding the right dependency declaration for an external library then Maven will download it from your configured remote repository (the first time anyway - afterwards it will then be able to get it from your local repository). By default, this is the Maven Central repository. To add an external library to your project just follow that link, enter the library in the search box, click on the version link for the version you require, then you will be taken to a page where there will be the dependency XML declaration that you can just copy and paste into your POM.
One more thing that may help is that you should make sure that your source folders follow the Maven default directory structure. That is, your test packages should be contained in a source folder called 'src/test/java', and the main project packages should go in 'src/main/java'. Otherwise Maven will not know where to find your source code. It is possible to configure a POM to tell Maven to expect your source code to be in different source folders, but it is highly recommended that you follow the standard Maven directory structure.
Since you have child modules, my suggestion would be to simplify things by creating a new Maven project from scratch that you can have a play around with. Once you are comfortable with that then try getting m2e to work for your multi-module project.
I remember your pain when first getting to grips with Maven, but it's great once you understand what it's doing and everything is working. I highly recommend reading through the free online book Maven: The Complete Reference - it helped me out a lot when I was getting started with Maven.
I have experienced the same messages and have found a working solution, thanks to one of my organization's Maven experts.
Here was my pom.xml that reproduces your error:
<dependencies>
<dependency>
<groupId>org.junit4</groupId>
<artifactId>org.junit4</artifactId>
<version>4.3.1</version>
</dependency>
</dependencies>
With it, I would get package org.junit does not exist messages and NoClassDefFoundError: org/junit/Assert. Similar to your experience, it worked great from Eclipse, green bars and all.
Here is the pom.xml that works:
<dependencies>
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>4.8.1</version>
<scope>test</scope>
</dependency>
</dependencies>
I copied this from the example at the top of this Using JUnit page.