I want the following items in this solution to be added to another solution:
(the selected items are what I want to import)
I select those items, and right click > copy, but when I go to paste the items, I can't paste anything:
Is it possible to import just allowed.cs, theme.cs, theme2.cs, themebase.cs to EmailSpitter? I also want to copy everything in Allowed.cs (meaning the design and the code inside)
I tried moving the items one at a time, but that didn't work either.
Typically, it's a better idea to pull those into a class library, and add a reference to it from both projects.
This will allow you to share the same code, without duplication. This is much nicer to maintain over time, as you only have the code in one place, so you can fix your issues in a single place.
Related
I have a joomla site and would like to integrate some old unfinished webcomics to it, so I can pick them up where I stopped in a CMS that won't leave me in an absolute frothing rage (thanks, wordpress).
I've got some experience with Joomla and I believe it would be a pretty good platform for managing multiple comics... except for the small issue of horrid navigation between pages/articles. Joomla's integrated article navigation is a humble but passable start, but if you intend to use categories to organize chapters then getting from the end of one to the beginning of the next is... yeah. This is a pity, as Joomla's category and article management options are beautiful for archiving and presentation, and adding gantry 5 to it means a great deal of control over the reading experience. Basically, joomla has pretty much everything I want, except for the navigation.
Ideally, what I'd like to be able to accomplish for comic navigation in joomla is:
Clickable full-article-image leading to next article/page
Prev/next article buttons (already available)
Prev/next category buttons (do we have those?)
The latter two in a module I can choose where to publish (optional)
And this is it, basically. I understand that implementing the first could be very hard without some major template customization, in which case I'd be willing to insert the image as a link in the article body... but only if there was one single code I could use, like the one that generates the next category article button. Because I'm not willing to create hundreds of menu items to generate links page-by-page.
So is any of this doable?
This is a quick answer but too much for a comment. I'm assuming since you are on SO that you don't mind coding (as opposed to just configuring).
I think you need to do two things. First you need to create a pagination.php for your template. This will let you really super control what the pagination looks like. You can have images, special css and js, whatever you want. You can also add the "last" and "first" options.
I think you need to make a new plugin to replace the core pagenavigation plugin and that also generates the previous/next category links. (Or I guess you could make one just to do categorynavigation depending on what you want.) HOWEVER, it seems to me that there is data on the sibling links that is already being generated in the content category model so you might be able to use that. (Check the code; I think there was never a UI for it, but it is there. Even if it isn't there, siblings are very easy to obtain in nested sets)
The other thing you can really think about if you go that route is changing the whole thing somewhat to use a module that gets the current ID and category ID from JInput. You might also be able to use JPagination. The important thing, however is that you make sure to do the caching the way the pagination that is there does it. In other words you really want to cache the whole list in the order you want so you are not running so many queries and slowing your site down. You may want to look at the categories and category modules to get some ideas about the queries to do.
Hope that gets you started, but it is definitely something you can do without too much trouble.
Like the topic say I want to overwrite/change the "Menu Manager: Edit Menu item" layout. To illustrate my question:
In the picture whiche is shown I want to change the labels: Layout, Option, Integration.... and add some other options to it. How can I do it? Or is this even possible?
In order to change the text, simply use language overrides, google is your friend.
In order to add functionality, let's first of all explain what we're talking about to ensure we're on the same page.
Joomla components have views which can have one or more layouts, i.e.
/components/com_content/views/category/tmpl/ contains two layouts, blog and default.
A layout can additionally contain an .xml manifest (in our case, blog.xml and default.xml) allowing us to create a menu item for the specific view/layout combination. The .xml file contains the parameters that the user will set, you can add your own as well.
When you want to change Joomla, usually there is a way to do so without touching the core, which would be pretty bad, as any Joomla! updates would break your work.
For the view layouts a special feature called template override was developed, which allows you to create an alternative to the view layout in a safe place (under your template folder, in this case your admin template), and this is the most elegant and effective way to achieve your result.
Beware though, you are just creating a layout, most likely you will want to add functionality, if it's complex you might be better off creating a dedicated component to keep the code clean. Or you can just put all the logic in your view, query the database from there. But in this latter case, get paid, and run away. Never answer the phone to the customer again.
A final alternative is to write a system plugin that will manipulate the page markup after it was generated in the event onAfterRender(). This is a simple and good approach if you only want to add a button or make minor changes, but if you do anything more than that, see the above advise about running away.
I've put together a block of RTML that i would like to add to a product page. Now that i've got that, I'm trying to figure out how to place that whole block of RTML into the product's template. That may not be the right way to do it.
my desired result is that the html of the product page is rendered PLUS the html that would be rendered by my added block of RTML.'
What I have tried: as far as I can tell, i can only use the editor to add RTML 1 line / update at a time. which means anything complicated would take forever.
Yes Kristian, you're absolutely right. The operators in RTML take a very, very long time to insert because it requires a page refresh for each operator in the store editor. If you have a lot of HTML to update, you can use the RTML template uploader located here http://www.yourstorewizards.com/rtml-transfer-utility.html . While it is free to "download" templates, you are charged for "uploading" templates. This is because you aren't truly uploading or downloading templates. What the program does is move your mouse around the screen very quickly doing all the clicking for you.
At the very least, you can use the MULTI command to group other commands together. That way you can quickly duplicate operators/HTML. You can take a bunch of TEXT operators and quickly duplicate them inside a MULTI, and then duplicate the MULTI. This is probably one of the most efficient ways to do large blocks of HTML.
Another idea... Print out a script tag using a TEXT operator, and insert your HTML with JavaScript. Obviously you won't want to do this all the time, but if you're looking to insert a very large piece of HTML this may be your best bet.
"Change an item in the navigation? Sure I can do that in 15 minutes."
So I am trying to update the navigation on a site that I inherited only to find out that the previous programmer was a college student and was using this site as a project of some sort. Needless to say there are zero comments and the code calls function after function and I just can't follow the logic.
I am looking for a roundabout way to update the navigation. I tried using Dreamweaver to search through all of the files in the site and look for any files that contain the name of the page or the url (hoping to find some sort of included file). There was none. I did file text files that control the main navigation but none for the subnavigation.
There is no database.
If it helps here is the site. http://bit.ly/jbs639
And if you want to look at the interesting text file that is parsed to create the main navigation you can find it here: http://bit.ly/m3erna
Hmmm.... Interesting indeed. You have my sympathy.
One thing that I would look at... The file that gets parsed for the main navigation appears to be a simple delimited file. Sure, the delimiter is a rather unusual +++, but that choice means it avoids conflict with things like commas that might be desirable in the link text. It looks as if the last element indicates what type of resource is being accessed (file or directory, although I don't know what - if any - effect that has on the final output). It also appears that there are similar text files (in the framework/cfg/nav/ folder... which should probably not be generally accessible BTW) for the sub-menus. (E.g. the file stores.txt appears to contain the additional navigation items associated with the stores sub-navigation).
You don't mention which sub-menu you're trying to change. I suspect it is the "About TTO" one, which I can't find an entry for... but I'd look to see if there are any similar navigation text files in the /content/about/ folder.
Good Luck!
Of course it was as simple as a function that reads all of the files in the directory and the name of the file. I guess that in this case there was no shortcut.
After tinkering and modifying a GUI I have been working on for some time I ended up with a group of EditControllers and Radio Buttons that I do not need any more, so I would like to get rid of them. However, if I simply delete them from the GUI edit, I get assertion errors. How am I supposed to get rid of these elements?
You need to remove all code from your program that refers to the deleted controls. For each control you want to delete, take its ID and search the source for statements that refer to it.
Start like this:
Check the ID of that given control. Copy it. Now remove the control from dialog resource.
Ensure that ID is not used by other dialogs. If not, you can use following.
Delete that ID from resource.h.
When you compile it, you'd get error (around GetDlgItem, DDX_Control etc). Remove or comment them. Remove appropriate CWnd-derived variables (like CEdit, CComboBox etc).
You are done!
If given ID is used by other dialogs (check it from Resource View's context menu Resource Symbols...), then you cannot directly remove it from resource editor. You, however, need to remove it from appropriate implementation file (of CDialog/CPropertyPage-derived class).