matlab command (from bash / command line) on an already running session - bash

$ matlab -nodesktop -nojvm &
How would I execute matlab commands on the session that was just created?
In other words, I want to have a matlab session running in the background, and execute matlab commands and/or scripts from an arbitrary terminal at any given time without having to create a new session.

I would suggest a similar solution as carandraug did, only I prefer tmux as the multiplexer. It may be a bit tricky getting the commands passed in correctly so create a shell-script that handles the details.
Let's say you've started matlab in a terminal like this:
tmux new -s matlab "matlab -nodesktop -nojvm"
Now a tmux session called matlab is running matlab with no gui.
Create this shell-script:
mx
#!/bin/bash
if [[ $# -eq 0 ]]; then
while read; do
tmux send-keys -t matlab "$REPLY"$'\n'
done
else
tmux send-keys -t matlab "$#"$'\n'
fi
In a different terminal you can now run quoted matlab commands:
mx "A = reshape(1:9, 3, 3)"
Or even pass commands in through a pipe:
for mat in A B C; do echo "$mat = reshape(1:9, 3, 3)"; done | mx

A possibility is to start a screen session, then start matlab on it, and detach from it. Anytime you want to use it, just fire up a terminal and reattach that screen session.
Basically start screen (just type screen at a terminal), and start your matlab session. Then detach from the session (Ctrl+A followed by pressing D) and you'll be back to your terminal. You can close the window no problem, any process that started on screen will keep on running. Whenever you want to get it again (it's called reattach the session), just use screen -r. Take a look at the man page for all the other options.
Note that a screen session can have any number of windows and you can also have multiple screen session at the same time. Take a good luck at some tutorials online, it's an extremely useful tool, specially but not only, if you connect a lot to other systems that may have need to run long jobs.

Related

Multiple tabs and Bash scripting

I am trying to open multiple tabs and execute a series of commands in each tab. Lets say I open 3 tabs tab1, tab2, tab3. Then in each tab I would like to execute following:
ssh user#address (PublicKey Authentication is setup and
hence no need to enter password)
Launch python scripts (python some.py)
Hold the tab open after executing the commands to see the outputs.
I went through some threads and have a rough outline for Bash script.
#!/bin/bash
echo "Script running"
gnome-terminal -e "bash -c \"ssh user#address; uname -a; exec bash\""
When I run the above script, a new terminal opens and I can see that I have ssh-ed into the target address but the other command uname -a didnot execute.
I would like to build upon this to implement the following:
Open multiple tabs and run commands. Ex : gnome-terminal --tab -e
"bash -c \"ssh user#address; python file1.py; exec bash\"" -tab -e
"bash -c \"ssh user#address; python file2.py; exec bash\""
Wait for one of the python file to start executing before opening
another tab and repeating the process for another python file.
Also is there a better way to implement the same task ?
The above code snippet was from this thread.
You should consider using screen or tmux or a similar terminal multiplexer for this.
Example usage:
screen -d -m bash -c 'ls; bash'
to initiate a screen session in which ls was executed and then a shell started, and then
screen -X screen bash -c 'date; bash'
to create a new window in the existing screen session, run date therein and then start a shell in that window.
Mind that the programs are run without you seeing their output right away on your controlling terminal. You can then attach to the screen session using
screen -x
Which attach you to the running session and will show you one of the screen windows (the virtual terminals of your two running programs). Typing Ctrl-A n will switch through the windows, Ctrl-A d will detach you again, leaving the programs running, so you can attach later with screen -x.
You can attach from several locations (e. g. from two different Gnome-terminals) to the same running windows. Both will then show the same contents.
Another advantage of using screen is that you can log out and the programs keep running. If you later login again, you can still attach to the running sessions.
Only a direct attack like a reboot, a kill-signal or an interaction (like pressing Ctrl-C while being attached) will terminate your programs then.

How to enter keyboard shortcuts in bash script

Is it possible to enter keyboard shortcuts into a bash script? For example, I have tried typing in ^d to substitute for control + d (logout) without success.
ubuntu#vfleet:~$ ^d
-bash: :s^d: substitution failed
ubuntu#vfleet:~$ ^D
-bash: :s^D: substitution failed
I am using screen to run a django development server in the background. One of the commands to run a particular screen as a daemon is control + a + d. The goal is to be able to enter in control + a + d into a bash script. For example:
python manage.py runserver
^a + d
Is this possible?
Edit:
A valid method of avoiding the keyboard shortcut in screen is linked by Eric Renouf in the comments below. screen -d -m sh -c "python manage.py runserver" will start a development server as a daemon. This is a great solution for my particular problem, but it would still be nice to have a solution for the original question at hand.
xdotool package is the solution here.
xdotool key ctrl+d
Full reference
You probably should just start the command without attaching to the screen session in the first place, like
screen -d -m python manage.py runserver
but if you can't do that for some reason, you could detach from a screen session you're currently in by doing:
screen -S "$STY" -X detach
screen saves its current session info in STY, so we'll use that to make sure we're interacting with the correct session (in case there are many). Then we'll use -X to send a command to that session, in this case our command will be detach which will detach all the attached sessions, including the one used to execute that command
So while this doesn't actually send key strokes, it does highlight that there is often another command that you can send to accomplish your goals. Here detach takes the place of ctrl+a+d. Sending quit or running exit could often replace ctrl+d.
Another work-around would be to use expect which you could then use to send the strings containing control characters or hex values of them.

Pass command from scheduled script to program running in xterm window

I have a game server running in an xterm window.
Once daily I'd like to send a warning message to any players followed after a delay by the stop command to the program inside the xterm window from a script running on a schedule. This causes the cleanup and save functions to run automatically.
Once the program shuts down I can bring it back up easily but I don't know how to send the warning and stop commands first.
Typed directly into xterm the commands are:
broadcast Reboot in 2 minutes
(followed by a 2 minute wait and then simply):
stop
no / or other characters required.
Any help?
Do you also need to type something from the xterm itself (from time to time) or do you want your server to be fully driven from external commands?
Is your program line-oriented? You may first try something like:
mkfifo /tmp/f
tail -f /tmp/f | myprogram
and then try to send commands to your program (from another xterm) with
echo "mycommand" > /tmp/f
You may also consider using netcat for turning your program to a server:
Turn simple C program into server using netcat
http://lifehacker.com/202271/roll-your-own-servers-with-netcat
http://nc110.sourceforge.net/
Then you could write a shell script for sending the required commands to your "server".
If you know a little about C programming; I remember having once hacked the script program (which was very easy to do: code is short) in order to launch another program but to read commands from a FIFO file (then again a shell script would be easy to write for driving your program).
Something you might try is running your program inside a screen session.
You can then send commands to the session from cron that will be just
as if you typed them.
In your xterm, before launching the program do:
screen -S myscreen bash
(or you can even replace bash by your program). Then from your cron
screen -S myscreen -X stuff 'broadcast Reboot in 2 minutes\n'
sleep 120
screen -S myscreen -X stuff 'stop\n'
will enter that text. You can exit the session using screen -S myscreen -X quit
or by typing ctrl-a \.
screen is intended to be transparent. To easily see you are inside screen, you can
configure a permanent status bar at the bottom of your xterm:
echo 'hardstatus alwayslastline' >~/.screenrc
Now when you run screen you should see a reverse video bottom line. Depending
on your OS it may be empty.

How to clear bell state from all tmux windows

I help maintain a large number of Unix-like servers, and so keep a script called tmux-rebuild that I use to rebuild all the tmux sessions and windows with SSH links to each server.
I have tmux configured to show the window's name in red with an exclamation mark in its status bar when a terminal bell character is printed in that window. This is very handy for programs like irssi alerting me to when I have messages in another window.
I also have my $PS1 set up on every server to print a terminal bell at the end of every prompt. This is useful because if I run a long job in one window and switch to another, I can immediately see when it's finished because when my prompt is written to the screen after the job is done, tmux makes the window name come up in red with an exclamation mark. This is great for my workflow.
However it causes a slight problem with the rebuild script mentioned above, because when I start up tmux after running it, every window in every session is flagged in red, due to the first prompt being printed to the screen. This makes the feature useless until I visit every window, and there are something like 40-50 of them.
Is there something I can add to my script that will clear all alerts from sessions and windows after they are created? I don't mind using a kludge if necessary.
From the tmux man page, specifically the last sentence here:
kill-session [-aC] [-t target-session]
Destroy the given session, closing any windows linked to it
and no other sessions, and detaching all clients attached
to it. If -a is given, all sessions but the specified one is
killed. The -C flag clears alerts (bell, activity, or
silence) in all windows linked to the session.
So, simply:
tmux kill-session -C
Figured out an acceptable workaround; I redefined the next/previous bindings to allow repeats:
# Allow repeats for next/prev window
bind-key -r n next-window
bind-key -r p previous-window
This allows me to quickly sweep up the alerts for all windows in a session by pressing my prefix key and tapping "n" until they're all clear, and I'm back in my original window.
With tmux 1.6 (and later), list-windows can generate customizable output, so it is fairly simple to read the output lines and make a loop that runs select-window for each window.
Add list-session (to loop over all sessions, optionally), and display-message (to parse session specifiers, and to record the current/“last” windows so they can be properly restored), and you might end up with something like this:
#!/bin/sh
# usage: tmux-select-each [session [...]]
#
# Select every window in specified session(s). If no sessions are
# specified, process all windows in all sessions.
#
# This can be handy for clearing the activity flags of windows in
# freshly spawned sessions.
if test $# -gt 0; then
for session; do
tmux display-message -p -t "$session:" '#S'
done
else
tmux list-sessions -F '#{session_name}'
fi |
while read -r session; do
active_window=$(tmux display-message -p -t "$session:" '#S:#I')
last_window=$(tmux display-message -p -t "$session:"\! '#S:#I' 2>/dev/null)
tmux list-windows -t "$session" -F '#{session_name}:#{window_index}' |
while read -r window; do
if test "$window" = "$active_window" ||
test "$window" = "$last_window"; then
continue
fi
tmux select-window -t "$window"
done
if [ -n "$last_window" ]; then
tmux select-window -t "$last_window"
fi
tmux select-window -t "$active_window"
done

Sending different commands to different terminals

I need to run 3 different programs at different 'computers'. These computers are open in three different tabs in a terminal. How do I make a bash/python/?? script which can send three different commands to three different tabs. Thanks in advance.
Edit To the comments:
gnome-terminal -e "bash -c 'ls *; echo hello world; ssh user#remote -XCt xterm'"
Note that this allows you to easily embed environment variables as well:
MESSAGE="goobye"
gnome-terminal -e "bash -c 'echo $MESSAGE'"
I'd use GNU screen:
screen -DRS mysession # starts the session with a given name
screen command1 # start the commands
screen command2
screen command3
Now there are numerous options to show many or all windows at once, to monitor for activity, to log a window's output, whatnot. You can even detach a session and reconnect to it, so if you leave your desktop, you can come back to your session by logging in to your PC using e.g. ssh, and just typing
screen -DRS mysession
again: you'll be back where you were, all three windows still active
Edit Oh, and since you asked:
screen -xS mysession
will view/share the same session (named mysession) whithout detaching the other terminal. This makes it possible for you to share screens remotely, or show separate screens of the session in differen Xterm/gnome-terminals etc.
Some keybindings:
Ctrl+ASpace next screen
Ctrl+AS split horizontally
Ctrl+A| split vertically
Ctrl+ATab focus to next visible window
Ctrl+AD detach (reattach with screen -DR)
Many many more features...
Ctrl+A? feature help

Resources