I'am seriously figuring out this for the last one week and continuously keep on reading articles and blogs so that I can understand the difference in the very leman language and terms so that I can understand easily!!!!!
Dependency injection is simply about depending on an abstract interface and passing a concrete implementation of that interface to your class through the constructor or a setter method. This allows you to use a different concrete implementation without changing your class. This is useful, for instance for testing.
IoC is also known as the Hollywood principle: don't call us, we call you. In this case a framework defines an interface and the application provides the concrete implementation. This helps to limit dependencies between classes. IoC is often implemented using dependency injection, but it's not a hard requirement.
I would like to add extra attribute to the internal representation of beans in Spring. Is it possible? What mechanism should be applied if any?
My goal is to define my own beans for my framework. I can do it from scratch or reuse Spring mechanisms.
You could have a look at the documentation Container Extension Points.
To achieve customization you can create a:
BeanPostProcessor bean which operates on a bean instance. For example this allows to create a custom bean registry, to proxify...
BeanFactoryPostProcessor which can operate on bean metadata. This allows for overriding or adding properties even to eager-initializing beans, modifying the class...
BeanDefinitionRegistryPostProcessor which can operate right after the registry initialization. This allows to create, remove or update beans definitions.
For example you can create a new BeanDefinitionRegistryPostProcessor which will register (or modify) beans using a custom implementation of BeanDefinition which will contain custom attribute based on for example your owns annotation.
Could you elaborate a bit what are you trying to achieve with your framework?
Merci beaucoup, Nicolas :)
I will study both your answer and the documentation you provided. I have already found the *Postprocessors you mentioned but I was not sure if this is the right place and what is the nature of their customizations (subclassing or something different) and what are the consequences. My problem is not as simple as I told (not just adding an attribute) - the extended Spring bean should be used also in cooperation to Spring+AspectJ (not SpringAOP), especially with declare-parents construct. I would like to be able to create proxies for the redefined beans as well. I will let you know what are the results of my investigation and may be I will ask some questions.
And the answer to all of you:
My framework is dedicated to defining graph modeling languages (meta-models) at run-time (being far extension of OMG standards) and I am looking for solutions of limits introduced by current object representation in JVM, which promotes behaviour over structure. This is one of several approaches, but the most prospective for me due to the relatively small effort.
Kindly let help to understand in which scenario I should user constructor injection and setter injection. Please help me with appropriate Example.
Thanks in advance.
We usually advise people to use constructor injection for all
mandatory collaborators and setter injection for all other properties.
Again, constructor injection ensures all mandatory properties have
been satisfied, and it is simply not possible to instantiate an object
in an invalid state (not having passed its collaborators). In other
words, when using constructor injection you do not have to use a
dedicated mechanism to ensure required properties are set (other than
normal Java mechanisms).
More details http://blog.springsource.org/2007/07/11/setter-injection-versus-constructor-injection-and-the-use-of-required/
Personally, I tend towards constructor injection, and I do it for one primary reason.
Immutability.
With immutable objects, it is easier to make code thread safe. This is especially important when dealing with Spring singleton scope objects. If they are mutable, and accessed in different threads, it is not safe to change any of the shared state.
There are other reasons that immutability is beneficial, but I will let a webpage go on about that.
Why do people default to DI vs a global factory with a hashmap that maps interfaces/abstracts to classes? It would seem this is a higher performance solution to the problem no?
All the things mentioned so far in this thread can be provided by a global factory with a method like:
TestGlobalFactory implements GlobalFactoryI
ProductionGlobalFactory implements GlobalFactoryI //configures classes to interfaces
protected GlobalFactoryI gf=GlobalFactoryFactory.getInstance(); //only singleton used in app, specifies which GlobalFactory to use
protected SportsCarI mySportsCar=gf.new("sportsCarI",constructorVar1,constructorVar2);
The above would be much faster than recursive reflection to detect DI instances.
However I admittedly prefer the convention of DI as it ends up being fewer characters and greater flexibility with the option of third party containers.
artima.com/forums/flat.jsp?forum=106&thread=238700
Regardless DI, is the superior approach as it has the containers written to specify which implementation belongs in which class. With Service Locator one would actually have to do gf.new("thisClass","sportsCarI",constructor1)
The main advantage of dependency injection over a factory-based approach is not performance. Its main advantage is testability. The whole point of DI is to be able to inject mock dependencies to implement the unit tests of a component. Doing it with a factory is much more painful.
Because you get a lot more with Spring. Spring manages the lifecycle of its beans, in addition to caching instances in line with the user specified scope for the beans (e.g. prototype, singleton, etc). Also note that Spring's DI is related to its "Inversion of Control", so things are not hard coded directly into the app (unless you consider configuration code).
Spring has two two types of DI: setter DI and construction DI.
Constructor-based DI fixes the order in which the dependencies need to be injected. Setter based DI does not offer this.
Setter-based DI helps us to inject the dependency only when it is required, as opposed to requiring it at construction time.
I do not see any other significant differences, as both types of Spring DI provide the same features - both setter and constructor DI inject the dependency when the code starts up. Granted, constructor DI will do it through the constructor while setter DI will do it through a setter right after constructing the object, but it does not make any difference for the developer in terms of performance, etc. Both also offer means to specify the order of dependency injection as well.
I'm looking for a scenario where one provides a distinct advantage over the other or where one type is completely unusable.
When it comes to Spring specific pros and cons:
Constructor injection (from the definition) does not allow you to create circular dependencies between beans. This limitation is actually an advantage of constructor injection - Spring can resolve circular dependencies when setter injection is used without you even noticing.
On the other hand if you use constructor injection CGLIB is not able to create a proxy, forcing you to either use interface-based proxies or a dummy no-arg constructor. See: SPR-3150
You should be deciding based on design considerations, not tool (Spring) considerations. Unfortunately, Spring has trained us to use setter injection because when it was originally conceived, there was no such thing as an "annotation" in Java, and in XML, setter injection works and looks much better. Today, we're freed from those constraints, thus allowing it to be a design decision again. Your beans should use constructor injection for any dependencies that are required by the bean and setter injection for dependencies that are optional and have a reasonable default, more or less as OOD has been telling us from the beginning.
Constructor Injection: We are injecting the dependencies through Constructor.
Generally we can use for Mandatory dependencies.
If you use the Constructor injection there is one disadvantage called "Circular Dependency".
Circular Dependency: Assume A and B. A is dependent on B. B is dependent on A. In this constructor injection will be failed. At that time Setter injection is useful.
If Object state is not inconsistent it won't create Object.
Setter Injection: We are injecting the dependencies through Setter methods.
This is useful for Non-Mandatory dependencies.
It is possible to re injecting dependencies by using Setter Injection. It is not possible in Constructor injection.
As per the content from spring.io from Spring 5 onwards
Since you can mix constructor-based and setter-based DI, it is a good rule of thumb to use constructors for mandatory dependencies and setter methods or configuration methods for optional dependencies. Note that use of the #Required annotation on a setter method can be used to make the property a required dependency.
The Spring team generally advocates constructor injection as it enables one to implement application components as immutable objects and to ensure that required dependencies are not null. Furthermore constructor-injected components are always returned to client (calling) code in a fully initialized state. As a side note, a large number of constructor arguments is a bad code smell, implying that the class likely has too many responsibilities and should be refactored to better address proper separation of concerns.
Setter injection should primarily only be used for optional dependencies that can be assigned reasonable default values within the class. Otherwise, not-null checks must be performed everywhere the code uses the dependency. One benefit of setter injection is that setter methods make objects of that class amenable to reconfiguration or re-injection later. Management through JMX MBeans is therefore a compelling use case for setter injection.
Here is the link for above quote
But, all of the injections types are available and none of them are deprecated. At a high-level you get the same functionality across all injection types.
In short, choose the injection type that works best for your team and project.
Recommendations from the Spring team and independent blog posts will vary over time. There is no hard-fast rule.
If a particular injection style was not recommended by the Spring team, then they would mark it as deprecated or obsolete. That is not the case with any of the injection styles.
Prefer setter injection.
Think what would be without spring (as Ryan noted). Would you pass the dependencies in constructor? If there are too many dependencies this seems wrong. On the other hand the constructor may be used to enforce the valid state of the object - require all dependencies and verify if they are non-null.
Proxies are another thing (As Tomasz noted) - you will need a dummy constructor which defeats the whole idea.
There is a 3rd option btw - field injection. I tend to be using that, although it is not such a good design decision, because it saves an extra setter, but if this is used outside of spring I will have to add the setter.
My 2 cents.
Assume a classA with 10 fields, with few injected dependencies.
Now if you need entire classA with all fields then you can go for constructor injection.
But if you need only one of the injected field to use in that class you can use setter injection.
This way,
You will not create new object each time.
You do not need to worry about circular dependency issue(BeanCurrentlyInCreationException).
You will not have to create other fields for class A so you have much more flexible code
Since you can mix both, Constructor DI- and Setter-based DI, it is a good rule of thumb to use constructor arguments for mandatory dependencies and setters for optional dependencies.
Note that the use of a #Required annotation on a setter can be used to make setters required dependencies.
Probably it's not main advantage. But let me explain mechanism of injection in Spring.
The meaning of the difference these two approaches is that with the way of injection using #Inject, #Autowire and so on, Spring will inject one bean into another using reflection, and with the way of the constructor, we ourselves use the constructor in order to initialize one bean by another bean without using reflection.
Therefore, the way with constructor better other option, at least that we don't use reflection-mechanism because reflection is an expensive operation from the machine-side.
P.S. Please consider, that correct use of construction DI it's when you manually create bean through constructor with params, even though you can you create using constructor without any of them.
no, even Constructor Injection happen , injection is still working, but just limited initialize , setter injection is optional and flexible. but it may generally for the parameter class , a spring bean with other spring beans