Related
I'm trying to:
sudo tar xpzf mira-2044-x86_64-Darwin.tgz -C /
I am in the correct directory (my Downloads folder) but I get this error:
./usr/: Can't set user=0/group=0 for usrCan't update time for usr
tar: Error exit delayed from previous errors.
What does this error mean in this context?
Option p of tar means preserve permissions.
tar is attempting to set file permission, ownership and modification time of some existing directories. In MacOS, /usr is owned by root:wheel but the archive has it owned by root:root.
Unfortunately, when running tar as superuser, the default is to preserve permissions. So you cannot turn this off.
Fortunately, k option of tar will skip overwriting existing files or directories. You can tell tar not to overwrite /usr, /usr/local, /usr/local/bin and any directories that you already have.
Modification time is always restored when a file or directory is restored. Option k will already prevent modification time to get updated when it tells tar not to overwrite existing directories/files. It is still better to know that the option m tells tar not to update the modification time of a file/directory.
You should now be able to install miranda by running:
sudo tar xmpkvzf mira-2044-x86_64-Darwin.tgz -C /
That added v (verbose) option is just to let you see what are being extracted.
I would like to compress a directory.
tar -cvzf mydir.tar.gz mydir
but this retains symlinks so that it is not portable to a new system.
How can I convert symlinks?
I have tried
tar -cvzfh
since man tar says
-h, --dereference
don’t dump symlinks; dump the files they point to
but this results in an error
tar: Error exit delayed from previous errors
and creates a file called "zh"
My files are on a RHEL server.
Your tar.gz file name must follow immediately after the -f flag, merely reordering the flags may work.
tar -cvzhf mydir.tar.gz mydir
When I compress files with the built in zip compressor in Mac OSX, it causes an extra folder titled "__MACOSX" to be created in the extracted zip.
Can I adjust my settings to keep this folder from being created or do I need to purchase a third party compression tool?
UPDATE: I just found a freeware app for OSX that solves my problem: "YemuZip"
UPDATE 2: YemuZip is no longer freeware.
Can be fixed after the fact by zip -d filename.zip __MACOSX/\*
And, to also delete .DS_Store files: zip -d filename.zip \*/.DS_Store
When I had this problem I've done it from command line:
zip file.zip uncompressed
EDIT, after many downvotes: I was using this option for some time ago and I don't know where I learnt it, so I can't give you a better explanation. Chris Johnson's answer is correct, but I won't delete mine. As one comment says, it's more accurate to what OP is asking, as it compress without those files, instead of removing them from a compressed file. I find it easier to remember, too.
Inside the folder you want to be compressed, in terminal:
zip -r -X Archive.zip *
Where -X means: Exclude those invisible Mac resource files such as “_MACOSX” or “._Filename” and .ds store files
source
Note: Will only work for the folder and subsequent folder tree you are in and has to have the * wildcard.
This command did it for me:
zip -r Target.zip Source -x "*.DS_Store"
Target.zip is the zip file to create. Source is the source file/folder to zip up. The -x parameter specifies the file/folder to exclude.
If the above doesn't work for whatever reason, try this instead:
zip -r Target.zip Source -x "*.DS_Store" -x "__MACOSX"
I'm using this Automator Shell Script to fix it after.
It's showing up as contextual menu item (right clicking on any file showing up in Finder).
while read -r p; do
zip -d "$p" __MACOSX/\* || true
zip -d "$p" \*/.DS_Store || true
done
Create a new Service with Automator
Select "Files and Folders" in "Finder"
Add a "Shell Script Action"
zip -r "$destFileName.zip" "$srcFileName" -x "*/\__MACOSX" -x "*/\.*"
-x "*/\__MACOSX": ignore __MACOSX as you mention.
-x "*/\.*": ignore any hidden file, such as .DS_Store .
Quote the variable to avoid file if it's named with SPACE.
Also, you can build Automator Service to make it easily to use in Finder.
Check link below to see detail if you need.
Github
The unwanted folders can be also be deleted by the following way:
zip -d filename.zip "__MACOSX*"
Works best for me
The zip command line utility never creates a __MACOSX directory, so you can just run a command like this:
zip directory.zip -x \*.DS_Store -r directory
In the output below, a.zip which I created with the zip command line utility does not contain a __MACOSX directory, but a 2.zip which I created from Finder does.
$ touch a
$ xattr -w somekey somevalue a
$ zip a.zip a
adding: a (stored 0%)
$ unzip -l a.zip
Archive: a.zip
Length Date Time Name
-------- ---- ---- ----
0 01-02-16 20:29 a
-------- -------
0 1 file
$ unzip -l a\ 2.zip # I created `a 2.zip` from Finder before this
Archive: a 2.zip
Length Date Time Name
-------- ---- ---- ----
0 01-02-16 20:29 a
0 01-02-16 20:31 __MACOSX/
149 01-02-16 20:29 __MACOSX/._a
-------- -------
149 3 files
-x .DS_Store does not exclude .DS_Store files inside directories but -x \*.DS_Store does.
The top level file of a zip archive with multiple files should usually be a single directory, because if it is not, some unarchiving utilites (like unzip and 7z, but not Archive Utility, The Unarchiver, unar, or dtrx) do not create a containing directory for the files when the archive is extracted, which often makes the files difficult to find, and if multiple archives like that are extracted at the same time, it can be difficult to tell which files belong to which archive.
Archive Utility only creates a __MACOSX directory when you create an archive where at least one file contains metadata such as extended attributes, file flags, or a resource fork. The __MACOSX directory contains AppleDouble files whose filename starts with ._ that are used to store OS X-specific metadata. The zip command line utility discards metadata such as extended attributes, file flags, and resource forks, which also means that metadata such as tags is lost, and that aliases stop working, because the information in an alias file is stored in a resource fork.
Normally you can just discard the OS X-specific metadata, but to see what metadata files contain, you can use xattr -l. xattr also includes resource forks and file flags, because even though they are not actually stored as extended attributes, they can be accessed through the extended attributes interface. Both Archive Utility and the zip command line utility discard ACLs.
You can't.
But what you can do is delete those unwanted folders after zipping. Command line zip takes different arguments where one, the -d, is for deleting contents based on a regex. So you can use it like this:
zip -d filename.zip __MACOSX/\*
Cleanup .zip from .DS_Store and __MACOSX, including subfolders:
zip -d archive.zip '__MACOSX/*' '*/__MACOSX/*' .DS_Store '*/.DS_Store'
Walkthrough:
Create .zip as usual by right-clicking on the file (or folder) and selecting "Compress ..."
Open Terminal app (search Terminal in Spotlight search)
Type zip in the Terminal (but don't hit enter)
Drag .zip to the Terminal so it converts to the path
Copy paste -d '__MACOSX/*' '*/__MACOSX/*' .DS_Store '*/.DS_Store'
Hit enter
Use zipinfo archive.zip to list files inside, to check (optional)
I have a better solution after read all of the existed answers. Everything could done by a workflow in a single right click.
NO additional software, NO complicated command line stuffs and NO shell tricks.
The automator workflow:
Input: files or folders from any application.
Step 1: Create Archive, the system builtin with default parameters.
Step 2: Run Shell command, with input as parameters. Copy command below.
zip -d "$#" "__MACOSX/*" || true
zip -d "$#" "*/.DS_Store" || true
Save it and we are done! Just right click folder or bulk of files and choose workflow from services menu. Archive with no metadata will be created alongside.
IMAGE UPDATE: I chose "Quick Action" when creating a new workflow - here’s an English version of the screenshot:
do not zip any hidden file:
zip newzipname filename.any -x "\.*"
with this question, it should be like:
zip newzipname filename.any -x "\__MACOSX"
It must be said, though, zip command runs in terminal just compressing the file, it does not compress any others. So do this the result is the same:
zip newzipname filename.any
Keka does this. Just drag your directory over the app screen.
Do you mean the zip command-line tool or the Finder's Compress command?
For zip, you can try the --data-fork option. If that doesn't do it, you might try --no-extra, although that seems to ignore other file metadata that might be valuable, like uid/gid and file times.
For the Finder's Compress command, I don't believe there are any options to control its behavior. It's for the simple case.
The other tool, and maybe the one that the Finder actually uses under the hood, is ditto. With the -c -k options, it creates zip archives. With this tool, you can experiment with --norsrc, --noextattr, --noqtn, --noacl and/or simply leave off the --sequesterRsrc option (which, according to the man page, may be responsible for the __MACOSX subdirectory). Although, perhaps the absence of --sequesterRsrc simply means to use AppleDouble format, which would create ._ files all over the place instead of one __MACOSX directory.
This is how i avoid the __MACOSX directory when compress files with tar command:
$ cd dir-you-want-to-archive
$ find . | xargs xattr -l # <- list all files with special xattr attributes
...
./conf/clamav: com.apple.quarantine: 0083;5a9018b1;Safari;9DCAFF33-C7F5-4848-9A87-5E061E5E2D55
./conf/global: com.apple.quarantine: 0083;5a9018b1;Safari;9DCAFF33-C7F5-4848-9A87-5E061E5E2D55
./conf/web_server: com.apple.quarantine: 0083;5a9018b1;Safari;9DCAFF33-C7F5-4848-9A87-5E061E5E2D55
Delete the attribute first:
find . | xargs xattr -d com.apple.quarantine
Run find . | xargs xattr -l again, make sure no any file has the xattr attribute. then you're good to go:
tar cjvf file.tar.bz2 dir
Another shell script that could be used with the Automator tool (see also benedikt's answer on how to create the script) is:
while read -r f; do
d="$(dirname "$f")"
n="$(basename "$f")"
cd "$d"
zip "$n.zip" -x \*.DS_Store -r "$n"
done
The difference here is that this code directly compresses selected folders without macOS specific files (and not first compressing and afterwards deleting).
I have a series of files named filename.part0.tar, filename.part1.tar, … filename.part8.tar.
I guess tar can create multiple volumes when archiving, but I can't seem to find a way to unarchive them on Windows. I've tried to untar them using 7zip (GUI & commandline), WinRAR, tar114 (which doesn't run on 64-bit Windows), WinZip, and ZenTar (a little utility I found).
All programs run through the part0 file, extracting 3 rar files, then quit reporting an error. None of the other part files are recognized as .tar, .rar, .zip, or .gz.
I've tried concatenating them using the DOS copy command, but that doesn't work, possibly because part0 thru part6 and part8 are each 100Mb, while part7 is 53Mb and therefore likely the last part. I've tried several different logical orders for the files in concatenation, but no joy.
Other than installing Linux, finding a live distro, or tracking down the guy who left these files for me, how can I untar these files?
Install 7-zip. Right click on the first tar. In the context menu, go to "7zip -> Extract Here".
Works like a charm, no command-line kung-fu needed:)
EDIT:
I only now noticed that you mention already having tried 7zip. It might have balked if you tried to "open" the tar by going "open with" -> 7zip - Their command-line for opening files is a little unorthodox, so you have to associate via 7zip instead of via the file association system built-in to windows. If you try the right click -> "7-zip" -> "extract here", though, that should work- I tested the solution myself (albeit on a 32-bit Windows box- Don't have a 64 available)
1) download gzip http://www.gzip.org/ for windows and unpack it
2) gzip -c filename.part0.tar > foo.gz
gzip -c filename.part1.tar >> foo.gz
...
gzip -c filename.part8.tar >> foo.gz
3) unpack foo.gz
worked for me
As above, I had the same issue and ran into this old thread. For me it was a severe case of RTFM when installing a Siebel VM . These instructions were straight from the manual:
cat \
OVM_EL5U3_X86_ORACLE11G_SIEBEL811ENU_SIA21111_PVM.tgz.1of3 \
OVM_EL5U3_X86_ORACLE11G_SIEBEL811ENU_SIA21111_PVM.tgz.2of3 \
OVM_EL5U3_X86_ORACLE11G_SIEBEL811ENU_SIA21111_PVM.tgz.3of3 \
| tar xzf –
Worked for me!
The tar -M switch should it for you on windows (I'm using tar.exe).
tar --help says:
-M, --multi-volume create/list/extract multi-volume archive
I found this thread because I had the same problem with these files. Yes, the same exact files you have. Here's the correct order: 042358617 (i.e. start with part0, then part4, etc.)
Concatenate in that order and you'll get a tarball you can unarchive. (I'm not on Windows, so I can't advise on what app to use.) Note that of the 19 items contained therein, 3 are zip files that some unarchive utilities will report as being corrupted. Other apps will allow you to extract 99% of their contents. Again, I'm not on Windows, so you'll have to experiment for yourself.
Enjoy! ;)
This works well for me with multivolume tar archives (numbered .tar.1, .tar.2 and so on) and even allows to --list or --get specific folders or files in them:
#!/bin/bash
TAR=/usr/bin/tar
ARCHIVE=bkup-01Jun
RPATH=home/user
RDEST=restore/
EXCLUDE=.*
mkdir -p $RDEST
$TAR vf $ARCHIVE.tar.1 -F 'echo '$ARCHIVE'.tar.${TAR_VOLUME} >&${TAR_FD}' -C $RDEST --get $RPATH --exclude "$EXCLUDE"
Copy to a script file, then just change the parameters:
TAR=location of tar binary
ARCHIVE=Archive base name (without .tar.multivolumenumber)
RPATH=path to restore (leave empty for full restore)
RDEST=restore destination folder (relative or absolute path)
EXCLUDE=files to exclude (with pattern matching)
Interesting thing for me is you really DON'T use the -M option, as this would only ask you questions (insert next volume etc.)
Hello perhaps would help.
I had the same problems ...
a save on my web site made automaticaly in Centos at 4 am create multiple file in multivolume tar format (saveblabla.tar, saveblabla.tar1.tar, saveblabla.tar2.tar,etc..)
after downloading this file on my PC (windows) i can't extract them with both windows cmd or 7zip (unknow error).
I thirst binary copy file to reassemble tar files. (above in that thread)
copy /b file1+file2+file3 destination
after that, 7zip worked !!! Thanks for you help
I'm extracting a folder from a tarball, and I see these zero-byte files showing up in the result (where they are not in the source.) Setup (all on OS X):
On machine one, I have a directory /My/Stuff/Goes/Here/ containing several hundred files.
I build it like this
tar -cZf mystuff.tgz /My/Stuff/Goes/Here/
On machine two, I scp the tgz file to my local directory, then unpack it.
tar -xZf mystuff.tgz
It creates ~scott/My/Stuff/Goes/, but then under Goes, I see two files:
Here/ - a directory,
Here.bGd - a zero byte file.
The "Here.bGd" zero-byte file has a random 3-character suffix, mixed upper and lower-case characters. It has the same name as the lowest-level directory mentioned in the tar-creation command. It only appears at the lowest level directory named. Anybody know where these come from, and how I can adjust my tar creation to get rid of them?
Update: I checked the table of contents on the files using tar tZvf: toc does not list the zero-byte files, so I'm leaning toward the suggestion that the uncompress machine is at fault. OS X is version 10.5.5 on the unzip machine (not sure how to check the filesystem type). Tar is GNU tar 1.15.1, and it came with the machine.
You can get a table of contents from the tarball by doing
tar tZvf mystuff.tgz
If those zero-byte files are listed in the table of contents, then the problem is on the computer making the tarball. If they aren't listed, then the problem is on the computer decompressing the tarball.
I can't replicate this on my 10.5.5 system.
So, for each system:
what version of OSX are you using?
what filesystem is in use?
I have not seen this particular problem before with tar. However, there is another problem where tar bundles metadata files with regular files (they have the same name but are prefixed with "._"). The solution to this was to set the environment variable COPYFILE_DISABLE=y. If those weird files you have are more metadata files, maybe this would solve your problem as well?
Failing that, you could try installing a different version of tar.
On my MacOS X (10.4.11) machine, I sometimes acquire files .DS_Store in a directory (but these are not empty files), and I've seen other hidden file names on memory sticks that have been used on the Mac. These are somehow related to the Mac file system. I'd guess that what you are seeing are related to one or the other of these sets of files. Original Macs (MacOS 9 and earlier) had data forks and resource forks for files.
A little bit of play shows that a directory in which I've never used Finder has no .DS_Store file; if I use the Finder to navigate to that directory, the .DS_Store file appears. It presumably contains information about how the files should appear in the Finder display (so if you move files around, they stay where you put them).
This doesn't directly answer your question; I hope it gives some pointers.
I don't know (and boy is this a hard problem to Google for!), but here's a troubleshooting step: try tar without Z. That will determine whether compress or tar is causing the issue.